Messages are in Scheduled State

Hi
some of my messages are in scheduled state. i verified SMQ1,SMQ2 . no queues are in block state. also i executed register queues in sxmb-adm still they are same state. how can i make them as successful state. only by restarting the messages or is there any other way? also tell me why these messages went to scheduled state

Reddy,
Can you please check this threads for possible solutions:
Problem with scheduled message in SXMB_MONI
SXMB_MONI - Message scheduled on outbound side (no queues)
Regards,
---Satish

Similar Messages

Messages are in schedule state in adapter engine

Hi PI Gurus,
In Production system, I have a proxy to JDBC scenario (Using AAE).
From ECC messages are flowing successfully, but when I check the WRB I found no message.
When I checked the Message Monitoring I found, those messages were in schedule state. No logs are also maintained.
Any idea, what is the reason.
This scenerio is working fine in QA and Dev.
Thanks,
Krishna

Hi krishna
Monitor your JDBC communication channel in CC monitoring , if you found any error in CC , then take an action accordingly.
if CC status was gree then check JDBC Adapter Service in NetWeaver Administrator and stop and start it
otherwise can you please check the status of message in sxi_monitor and also check if it is stuck in smq2? Let us know what error you getting in sxmb_moni or the flag of message. As suggested above, check the status of communication channel of JDBC adapter and what errors you getting there if any.
check this link;/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Edited by: haribabu.karasala on Jul 13, 2011 8:03 AM
Regards
Hari
Edited by: haribabu.karasala on Jul 13, 2011 8:04 AM

Messages are in schedule state

Hello all,
I done flat file to flat file scenario. In sxmb_moni error showing "scheduled flag for my interface". If i went transaction SMQ2 click on display button then messages are going to showing the status: schedule for out outbound processing. In message monitaring messages are in To Be Delivered status and Waiting Status. If i resend those messages, status are not changing. Please help me out from this problem.
Thanks

Hi,
chk in SMQ1 and SMQ2 and delete the entries .
if your queue is registered as inbound and outbound.
also chk in SMQR if ur queue is registered as Inbound or Outbound
reward points if helpful...
PrashaNt

Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
Mrudula

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

After each Error Message,the follwing messages are in Scheduled in ECC SMQ2

Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
Prashanth

Hello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth

Messages are in HOLD state

Hello ALL,
We have all messages processed sucessfully in Monitor but in "HOLD" state in the Audit log...EO is the QOS...Not sure why the messages are in HOLD state..There are atleast 15 receivers for this interface..ANy ideas guys..
-Teresa

Hi Teresa,
Which SP do you work with?
note: 813993
"If a predecessor has the "canceled with errors"
status, further processing is not possible in systems
before Support Package 11 for the adapter framework
and Support Package 10 for the adapter framework core patch 02."
last time we talked you were on SP4 so
maybe you need OSS to handle this...
unless you've upgreaded
BTW
Are you sure it's not EOIO?
if it's EO then the predecessors thing doesn't make sense... wierd
>>>" Can't award points--Forum error"...
maybe they are changing our Martix...
Regards,
michal

[VERY URGENT]Messages going in Scheduled State

Hi Experts,
PROD ISSUE
All of sudden in PROD scenario all the messages start moving to Scheduled state in message monitoring and the channels have stopped polling . I have checked the dispatcher status in engine status (additional data tab) and find that the maximum thread count is 1.
Is that the issue? also any idea y this issue is happening and what can be checked and done in this case ?
URGENT HELP NEEDED !!!
Thanks in Advance

Hi,
You should check your Inbound or Outbound queue in SMQ1 & SMQ2. The messages are stuck there.
Double click on message & read the error details & resolve the same.
Check SM58 also for problem.
Also Register & Activate (re-asctivate) your queues in SXMB_ADM --> Manage Queue --> Register Queue & Activate Queue.
If the messages are stuck in queue, First resolve the error in Queue & check the messages.
Go through this Link
http://www.****************/Tutorials/XI/XMLMessageQueues/Monitor.htm
Hope this help
Regards
Praveen Reddy

Messages are in waiting state

Hi All
Scenario is: File to IDOC
I have around 20 interfaces running on production. All scenarios are working fine except one scenario.
Science morning File is getting picked up by XI from FTP but when i see in moni all messages are showing in "Scheduled for Outbound Processing" dont know why this thing is happening particularly for one Scenario.
Please suggest me what can be done.
I have already restarted the XI and already checked SMQ1 and SMQ2.
Regards
Dheeraj Kumar

Hi
If the status is "Scheduled for Outbound processing" ,then message has not been processed yet and is still in the queue. Have you checked transaction SM58?
Some times when we execute interface with large volume of
data, then in moni message shows as 'message schedule for out bound processing' because of large volume of data, so many entries will struck in the que( SMQ1 or SMQ2).
u need to release the queues.
Regards
Abhijit
Edited by: Abhijit Bolakhe on Apr 13, 2010 3:06 PM

Messages are in hold state due to one message at receiver JDBC adapter

Hello,
I am using a receiver JDBC adapter and trying to send an XML file which has an insert query to insert some data into the database i.e., Oracle 9i.
Here at the receiver side due to one message ( which is in to be delivered state) all other messages are got hold and waiting for long time.
I am getting the exceptions as this,
JDBC Adapter processing failed with Error processing request in sax parser: Error when executing statement for table/stored proc. 'FSASMGR.XTBL_KL06_IINQUIRY' (structure 'REC01'): java.sql.SQLException: ORA-12899: value too large for column "FSASMGR"."XTBL_KL06_IINQUIRY"."CASE_TITLE" (actual: 81, maximum: 80)
Exception caught when executing statement for table/stored proc. 'FSASMGR.XTBL_KL01_ISTAFF_MST' (structure 'REC1'):
java.sql.SQLException: ORA-00001: unique constraint (FSASMGR.XTBL_KL01_ISTAFF_MST) violated
Can anyone help me out in solving this issue.
THanks,
Soorya

hi surya,
jdbc channel tries a request for n number of times(no of rettries),if that request fails it will take up the following requests,its not like it will process a request forever.
to be delivered will be resulting if reciever is down or network between XI and database server is bad.
try to ping databse server from XI host system.
if everything is fine then look at the channel configuration->advanced->no of retries of database transaction on sql server.
just redue the count to 1 and recheck.
Regards,
rama Krishna

Messages are in Holding state in AE

Hi All:
I created one JDBC to JDBC scenario. XI pick data successfully but I am seeing messages are in
Holding state in Message Monitoring.
I am sure we cannot check the status of the queue's in AE, please let me know if I am not correct.
If anyone faced the same issue/problem please let me know what is the reason behind it and how we can resolve it.
Thanks in advance.
Farooq.

Hi prateek,
Really the great Blog !!
I tried the same approach...and I found one message with "System Error". I cancelled that message but what I observer that other messages was still
in the Holding state. So what I did I cancelled all the messages that were in
Holding state...and it solved my problem.
Really appreciate for the right answer
Thanks
Farooq.

File-File: Message are in Waiting state in Integration Engine

Hi,
I am trying to execute File-File integration scenario and the message is in Waiting state in Integration Engine.
I am getting the following error in sxmb_moni:
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME</SAP:P1>
I am getting the following error in the Visual Admin Trace:
com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'SMPP_CALL_JAVA_RUNTIME3' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User SAPJSF has no RFC authorization for function group SYST .
Can any one tell me how to provide RFC authorization to SAPJSF user.
Thanks in advance,
Nagarjuna

hi,
that is the reason for your problem
The user entered for LOGON in that does not have the requisite privileges.
Would sugget you contact your basis team and ask them to make the connection going. Then, this problem will be resolved.
To add more, SLDAPI and the rest are used for the connection between your ABAP and JAVA Stack. As, your mapping gets executed in the JAVA stack, during the execution, as this connection failed, so did your process.
Get this onnection up and reunning and it willsolve this issue.
Regards,
Bhavesh

Messages are in READY state in QUEUE TABLE but in AQ$ QUEUE TABLE messages are in PROCESSED State

HI All,
 We create a brand new oracle multi-consumer queue. We have en-queued the messages into the queue and are processed successfully.
 But when we checked the STATE Column of the messages in the queue table it was showing as "0". But it is showing as "PROCESSED" in the
 AQ$<QUEUE_TABLE> msg_state column.
We are unable to figure out why there is a mismatch. Can any one help us ?
Regards,
Hari P.

Hello,
the column value AQ$<QUEUE_TABLE>.MSG_STATE = 'PROCESSED' corresponds to column value <QUEUE_TABLE>.STATE = 2
(see definition of view AQ$<QUEUE_TABLE for the DECODE statement).
In your case you see a value of STATE = 0 instead of STATE = 2. Is this correct ? The value 0 corresponds to a state "READY" (the delay
is gone and the message is ready for dequeuing).
The AQ documentation says: "After the specified delay, the message is in the READY state and available for dequeuing."
Normally, you cannot see the processed data in your AQ because the enqueued data will be deleted after
successful dequeuing. You wrote that they were processed successfully.
Kind regards,
WoG

SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB

Hello,
A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB.
What could be the reason?
Im sure its not because of the space because all the messages which flow after that was there in the directory.
Regards,
Mathangi

Hi Mathangi,
double click on the queue and click on the first message which will direct to MONI
--> check what exactly the error is and try to resolve the error accordingly
if you are unable to do that
Right click on the first message and save LUV it will be saved in SMQ3
then unlock the queue and execute again it will process successfully..
later you can process the message which is saved
Regards,
Naveen

Messages are in Tobedelivered...

Dear Experts,
I am getting an issue in Engine status, messages are in Tobedelivered State, Engine status --> backlog Monitoring also shows so many messages.
After some time those are going, but here when i am checking Addition Data--> Threads those are fully utilized 15/15.
We maintained Thread count is 250 and We are assigned worker threads for asyn and sync 15,15,12,12.
suggest me how to resolve this issue.
Regards,
Kiran Polani

Dear Ansari,
We are currently in sap pi 7.0, we are using only AtoA applications. like jdbc,rfc,soap,proxies. java nodes are one.
Yes
0
0 / 0
15
File_http://sap.com/xi/XI/SystemCall
Yes
0
0 / 0
12
File_http://sap.com/xi/XI/SystemRecv
Yes
0
0 / 0
15
File_http://sap.com/xi/XI/SystemRqst
Yes
0
0 / 0
12
File_http://sap.com/xi/XI/SystemSend
RFC_http://sap.com/xi/XI/SystemCall
Yes
0
0 / 0
12
RFC_http://sap.com/xi/XI/SystemRecv
Yes
0
0 / 0
15
RFC_http://sap.com/xi/XI/SystemRqst
Yes
0
1 / 1
12
RFC_http://sap.com/xi/XI/SystemSend
Yes
0
0 / 0
15
SOAP_http://sap.com/xi/XI/SystemCall
Yes
0
4 / 4
12
SOAP_http://sap.com/xi/XI/SystemRecv
Yes
0
0 / 0
15
SOAP_http://sap.com/xi/XI/SystemRqst
Yes
0
0 / 0
12
SOAP_http://sap.com/xi/XI/SystemSend
Yes
0
0 / 0
15
JDBC_http://sap.com/xi/XI/SystemCall
Yes
0
0 / 0
12
JDBC_http://sap.com/xi/XI/SystemRecv
Yes
121
15 / 15
15
JDBC_http://sap.com/xi/XI/SystemRqst
Yes
0
0 / 0
12
JDBC_http://sap.com/xi/XI/SystemSend
Yes
0
0 / 0
15
1) we are allocating thread count is 250, what is the maximum value we can increase threadcount?
2) worker threads are assigend for system call is 12, systemRqst is 12 and system Recv 15 and SystemSend is 15. is these values are ok. or we can change.?
3) from which value we can change and can we change the value adapter wise.?
We are facing issue for soap and jdbc adapters those are using all resource from given.
Please suggest me what we can do for this.?
Regards,
Kiran polani

Messages are holding at QA System ?

Hi Experts
Can any body tell me how to release the hold message in QA System .
i have checked
smqr , smq1,smq2,
all are fine .
in run time work bench we have message (message are at holding state)

hi this is my queue id XI_SERIALIZE0074 but in rwb where i want to test.
when i go to message monitoring -> database-> showadition critera
messageid
referenced message
error category
error code
service definition
software component
application component
quality of service
message format
correlation id
Sequence ID
Serilization Context
Direction
Protocol
Connection
Transport
these are the opitions i am viwing in pi 7.1 , there is no CovertionID
Thanks and Regards.
G.Praveen Kumar

Messages are in Scheduled State

Similar Messages

Maybe you are looking for