Messages are not displayed in sxi_monitor transaction
my scenarios are working fine, I verified with a file->XI->file scenario where a file is picked up from FTP and output file is created in target FTP site.
But I dont see the messages relevant in the sxi_monitor, what could be the problem that monitor does not show processed messages.
FYI, I can see the relevant message in the message displaying tool(MDT)
Thanks
KK
hi
Initially u said file-file msgs not in MONI.. now u said SOAP msgs not in MONI.. which one is correct?
any how check this log from Michal.. it's good
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Thanks-GS
Similar Messages
-
My sent messages are not displayed...what happened and how do I restore?
My sent messages are not displayed...what happened and how do I restore?
http://kb.mozillazine.org/Disappearing_mail
-
Warning messages are not displayed in confirmation
Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
NatarajanHi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan -
LSO_CHECK_BOOKING custom error messages are not displayed
Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
JamesHi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes -
Messages are not displaying in SXMB_MONI in R/3 system
Hi,
my scenario is File -to Proxy (Inbound Proxy).. scenario is working fine... but those processed messages are not displyed in the SXMB_MONI screen in the R/3 System... .. but i wnat to see the messages in the R/3 system.. for this..any configuration is needed.. please suggest me..
Regards
JainThanks Aswin and Praveen,
Finally I got the messages in SXMB_MONI in R/3 system... for that I added one more paramater additionally along with the parameters are suggested by Mr.Praveen .. ..
any ways.. these are the parameters I added in the SXMB_ADM for your reference..
category :RUNTIME parameter:Logging value :1
category :RUNTIME parameter:Logging_sync value :1
category :RUNTIME parameter:Trace_level value :1
category :RUNTIME parameter:Logging_propagation value :1
keep sharing the knowledge...
Thanks
Jain -
My messages are not displaying, in the body of the message?
When going to mail I see messages but the body of the message does not display.
Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Display Variants are not displaying in VFX3 transaction
I am not able to check the variants that are created in VFX3 transaction,when i click on tab "Display Variants".
But when i go to<Variants<Display i can see the variants that are created for the same transaction.
Are there any parameters i need to select to Display all the variants that are ctreated for VFX3 transaction ,when i Click on tab "DISPLAY VARIANTS".
Please give Suggestions.
Regards
Srinivas Gutta.Hi,
The "Display Variants" button is for selecting ALV variants instead of report variants.
So if you execute VFX3 and create and ALV variant (via "Settings"-"Layout"-...Current,Save),
next time you can pre-select it on the VFX3 selection screen.
BR,
Barna -
Suddenly, messages are not displaying correctly, how can I cure this?
Messages have stopped displaying correctly, or, in some case, at all. The messages have downloaded OK. Even messages which were displaying correctly earlier, now don't. It occurred after 'finger' problems - I tried to type something into Firefox but failed to change focus from Thunderbird to Firefox first and have obviously changed some setting. What can I do to restore normal behaviour?
I have tried uninstalling and reinstalling, and even deleting all references I can find to Thunderbird from the AppData folders in the users directory all to no avail.Thank you for the suggestions. They did not cure the problem, but that is because I think now that there is no problem; Thunderbird is working normally. It appears to have had a temporary glitch and has corrupted 8 or 9 messages around the one I was viewing when I hit wrong keys. The corrupted messages seem to contain the headers of dozens of other messages, some quite old. Apart from those few messages, all others in the root inbox folder and in all sub-folders seem OK.
Thanks again for trying. -
R/3 Warning Messages are not displayed
Hi experts!!!
I have the following issue:
Credit Limit Check works in ERP and displayes warning message during order creation. I need the same message to be displayed in B2B application.
How can i achieve this???Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan -
I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.
Back up all data. Rebuild the mailbox.
-
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
Messages are not transferring from PI to SRM
Hi,
Here the land scape is ECC -PI-SRM, The messages transfer to ECC TO PI, But messages not transfer from PI-SRM ,the scenarios are Idoc-idoc & Idoc -proxy ,Here all RFC connections are working fine, . In SRM side - T-code sldcheck getting the error - function call returned exception code 3, and in SPROXY T-CODE - ESR components are not displaying, could please provide help .
Regards,
seetharam.Hi M Joshi ,
Please check the below :
1) One RFC of type H to point to PI with all the details.
2) Define the role of the business system in the server that you want to see(Sxmb_Adm)
3)Connection between Business System and System Landscape Directory.
3a)RFC destination LCRSAPRFC of type T for SLD connection.
3b)RFC destination SAPSLDAPI of type T for SLD connection.
4)Maintain the SAP J2EE Connection parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE Engine
5)Maintain SLD access details in Transaction SLDAPICUST.
Please refer the section 1.3.1, 1.3.2, 1.3.3 and 1.3.4 in the document(as linked provided below)
SLDAPICUST should point to the SLD host server. If you have a central SLD installed on the Dev server, then it is ok that it is using the host and port of the Dev server.
PIAPPLUSER is the normal user that is used in trx SLDAPICUST (the user must have the role SAP_XI_APPL_SERV_USER).
'Lastly, will the gateway Server of SAPSLDAPI and LCRSAPRFC will be the same for both DEV and QAs systems in XI?'
For proxy configuration, refer the following link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&overridelayout=true
you can also check the assignment between the Business System , technical system and the software component versions in the SLD.A object would only be visible in the SPROXY of an Applicaion system if the corresponding SCWV is installed on the business system.
To add :
Go to the landscape view in the SLD.
Select the Technical System Link
Search your Technical system as Application system
Click on the same
A tabbed screen appears in the bottom.
Go to installed software tab.
Click ADD NEW PRODUCT
Add your product here.
Also check the business System assignment in the similar way. -
Firefighter Config change logs / SOD logs are not displayed..
We are on GRC 5.3, SP8. I have configured the SUP and firefighter id's are working fine. However, I am getting the message " No match nor conflict found " when I execute the 'Configuration Change Log report' and 'SOD Violations Report' even though the we changed the configuration and FF id's executed conflicting transactions defined in RAR. ' Log data changes ' box is already activated in the following tables:
1. Configuration (/VIRSA/ZFFCONFIG)
2. Controllers (/VIRSA/ZFFCNTRL)
3. Critical Tcodes (/VIRSA/ZVIRTCODE)
4. Firefighters (/VIRSA/ZFFUSERS)
5. Owners (/VIRSA/ZVIRFFIDS)
6. Reason Codes (/VIRSA/ZFFRCD)
7. Security (/VIRSA/ZVIRFFPWD)
Still the logs are not displayed. Thanks for your help.
Regards,
RajHi Raj,
Can you check the SM37 background job../VIRSA/ZVFATBAK is running or NOT???
Regards'
Gangadhar -
Error Message is not displayed on the pop screen for chain end chain
Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzalHi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun
Maybe you are looking for
-
Using a interface in a sparse-root zone on a different subnet
Hello, is it possible to use interface ce0 for the global zone and configure interface ce1 for the non-global zone, but the interfaces are on a different subnet? ce0 ... 10.5.5.18 / global zone ce1 ... 192.168.5.18 / non-global zone using Solaris 5.1
-
Not retaining the text highlight in jtextpane
I have a jtextpane and a button in a frame. when the user selects some text in textpane and clicks on the button, a word gets appended to the selected text and also gets highlighted. It works fine when the button is clicked but the when the focus cha
-
How to copy a webi from one system to another system? l
like from production system to another develop system thanks
-
I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.
-
Why won't it let me