Messages are not reaching to Adapter Engine (JMS receiver)

Hi Friends,
We have one scenario running on Production env.
Scenario is: R3(IDOC) -> XI ->JMS Provider
IDOC to JMS.
Sometime we found messsages are successful in SXMB_MONI, but those messages entries are not found under AE.
Means they are not reaching to JMS.
Communication channel is green, without any error.
This happens sometime only, and no changes have been done to JMS adapter parameters.
What might have happen to these messages, which are successful in MONI but not visible under AE.(Even not in Archived option)?
I searched on SDN, but most of the questions are unanswered.
Please let me know your inputs.
Divyesh Vasani

Hi Divyesh,
check under message monitoring in RWB
if u r not finding the message there , those might be archived.
did u confirm with the destination system .. if they got the messages?
if at all messages are stuch in AE ... and if u search the correct message u should be able to see the message.
if the Integration engine unable to put messages in AE , then in some pipeline step in MONI it will show error

Similar Messages

Message do not exists in adapter engine

I have a message being sent to IE via JMS Adapter . In Communication channel monitoring i could see the message Id & error message(Error in converting Binary message) but with that message id i could not find any entry in Message monitoring - > Adatpter Engine. Moreover , In communication channel monitoring the id with which the message failed is not hyperlinked to "Message Display Tool (Detail Display) ".
I need the message which is failed.
Thanks ,
Satish

It may be possible that message came into error as soon as it was picked by the sender channel. Could you see some error for these messages in Communication channel monitoring? Another possibility is your message is persisted in the adapter engine for very short duration. In that case, if it is archived, you may select the Archive option in Message Monitoring instead of Database option.
Regards,
Prateek

Some messages are not reaching my webmail INBOX

I use an email forwarder so that my email address is [email protected] (It's not really xyzzy but you get the idea.) They redirect messages to my actual Verizon email address.
In the past week, some emails sent to xyzzy are not getting to VZ. POBOX says they are forwarding them and sent me the following for one test message:
I have found the message in question:
138587ec 6 10:41:56 sepia postfix/cleanup[21713]: 7F50A40A675: message-id=<[email protected]>
138590ec 6 10:41:56 sepia postfix/qmgr[32466]: 7F50A40A675: from=<SRS0=+HRw=6S=pobox.com=[email protected]>, size=1018, nrcpt=1 (queue active)
138599ec 6 10:41:56 sepia postfix/smtp[21995]: 7F50A40A675: to=<[email protected]>, relay=a-pb-fb-quonix.pobox.com[208.72.237.7], delay=0, status=sent (250 2.0.0 Ok: queued as C31D97308)
If you still cannot find this message, I would suggest contacting Verizon with these logs to find out if they know where this message went. According to our logs, this message was sent successfully to your forwarding address.
I chatted online with a VZ tech support person who didn't know what an email forwarder was but he said that someone would call me in 15-20 minutes. When no one called in an hour, I called VZ. I got to Shilpa on the second level who insisted that I had to download and run a program that would let them control my PC. I refused, offering to send them an email with the above message from POBOX.COM. She insisted on the remote assistance app, and then decided that she could not help me if I did not comply. I asked for her supervisor. She agreed to transfer the call and then placed me on hold FOR TWO HOURS, at which point VZ terminated the call.
I'm hoping that some VZ email wizard can pass the above log to an email administrator who can solve the problem of the never-appearing emails.
Thank you in advance.

pjh wrote:
I use an email forwarder so that my email address is [email protected]. (It's not really xyzzy but you get the idea.) They redirect messages to my actual Verizon email address.
In the past week, some emails sent to xyzzy are not getting to VZ. POBOX says they are forwarding them and sent me the following for one test message:
I have found the message in question:
138587ec 6 10:41:56 sepia postfix/cleanup[21713]: 7F50A40A675: message-id=<[email protected]>
138590ec 6 10:41:56 sepia postfix/qmgr[32466]: 7F50A40A675: from=<[email protected]>, size=1018, nrcpt=1 (queue active)
138599ec 6 10:41:56 sepia postfix/smtp[21995]: 7F50A40A675: to=<[email protected]>, relay=a-pb-fb-quonix.pobox.com[208.72.237.7], delay=0, status=sent (250 2.0.0 Ok: queued as C31D97308)
If you still cannot find this message, I would suggest contacting Verizon with these logs to find out if they know where this message went. According to our logs, this message was sent successfully to your forwarding address.
I chatted online with a VZ tech support person who didn't know what an email forwarder was but he said that someone would call me in 15-20 minutes. When no one called in an hour, I called VZ. I got to Shilpa on the second level who insisted that I had to download and run a program that would let them control my PC. I refused, offering to send them an email with the above message from POBOX.COM. She insisted on the remote assistance app, and then decided that she could not help me if I did not comply. I asked for her supervisor. She agreed to transfer the call and then placed me on hold FOR TWO HOURS, at which point VZ terminated the call.
I'm hoping that some VZ email wizard can pass the above log to an email administrator who can solve the problem of the never-appearing emails.
Thank you in advance.
If the email forwarder is not getting a bounceback, set your spam detector to save messages instead of deleting them in verizon.net and see if they show up in your spam folder.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

The message is not reaching the outgoing communication channel

hi forum help..............
i have a IDOC-XI--JDBC scenario...
my xi receives an idoc from a sap ecc.....does a simple mapping to a jdbc structuuure and then writes to a databse....
it was working fine..... but now i had to change the JDBC adapter configuration..means in the integration builder(configuration).. i changed the name of my database server.....
now after making that change ....... the message is not reaching the outgoing communication channel....
i cant see any error in the sxmb_moni....
but there is no log for the message processing in the communication channel in the RWB............

hi,
Is the Database is running on the same server and the same tables and all are existed with same structure.
Database name is changed then you would have to check all . and after changes , did you activated ?
If every thing is correct, then refresh Cache.
For cache related see the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

Getting message Attempt to determine which Adapter Engines......

Hello All
1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
Updating SOAP Adapter (Sender channel).
Refreshed all caches...
2. Also while testing using SOAP Test client getting response
HTTP/1.1 500 Internal Server Error
connection: close
set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
server: SAP J2EE Engine/6.40
content-type: text/xml; charset=utf-8
any idea?
Thanks in advance

Hi Naveen
Thanks for your reply...
Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
I was getting the error because of wrong namespace in channel (Case sensitive).
So i updated this name space and after activation i am getting above message while testing.
Regards

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

PL/SQL log messages are not printing from Java concurrent program

Hi,
I have a strange issue while submitting the Java concurrent program through PL/SQL.
I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages. But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
Thanks
Suriya

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are not being saved on N96

On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

My sent messages are not displayed...what happened and how do I restore?

My sent messages are not displayed...what happened and how do I restore?

http://kb.mozillazine.org/Disappearing_mail

Mail 3, smtp, IMAP: sent messages are not saved on server

Hello,
I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
Any help is appreciated.
rene

Well, be stumped I did all that, but to be sure, I did it again:
I have a lot folders with subfolders and they are shown under my account name.
I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
+The connection to the server mail.hicetnunc.nl on port 143 timed out"+
Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

Messages are not displaying in SXMB_MONI in R/3 system

Hi,
      my scenario is File -to Proxy (Inbound Proxy).. scenario is working fine... but those processed messages are not displyed in the SXMB_MONI screen in the R/3 System... .. but i wnat to see the messages in the R/3 system.. for this..any configuration is needed.. please suggest me..
Regards
Jain

Thanks Aswin and Praveen,
      Finally I got the messages in SXMB_MONI in R/3 system... for that I added one more paramater additionally along with the parameters are suggested by Mr.Praveen .. ..
any ways.. these are the parameters I added in the SXMB_ADM   for your reference..
category :RUNTIME parameter:Logging value :1
category :RUNTIME parameter:Logging_sync value :1
category :RUNTIME parameter:Trace_level value :1
category :RUNTIME parameter:Logging_propagation value :1
keep sharing the knowledge...
Thanks
Jain

Messages are not reaching to Adapter Engine (JMS receiver)

Similar Messages

Maybe you are looking for