Messages are not reflecting correctly

Hi,
I have created message ABC from the front end.
later I have changed to content of the message, changed message content is not reflecting in OAF even after bouncing the apache.
can any one help me to resolve this issue.
Thanks,
Mahesh

hi mahesh,
After changing message content in EBS , you need to close the jdeveloper and open again to see changed messages.
where as in application(ebs) apache bounce required for changed content.
Thanks
vamshi.

Similar Messages

Suddenly, messages are not displaying correctly, how can I cure this?

Messages have stopped displaying correctly, or, in some case, at all. The messages have downloaded OK. Even messages which were displaying correctly earlier, now don't. It occurred after 'finger' problems - I tried to type something into Firefox but failed to change focus from Thunderbird to Firefox first and have obviously changed some setting. What can I do to restore normal behaviour?
I have tried uninstalling and reinstalling, and even deleting all references I can find to Thunderbird from the AppData folders in the users directory all to no avail.

Thank you for the suggestions. They did not cure the problem, but that is because I think now that there is no problem; Thunderbird is working normally. It appears to have had a temporary glitch and has corrupted 8 or 9 messages around the one I was viewing when I hit wrong keys. The corrupted messages seem to contain the headers of dozens of other messages, some quite old. Apart from those few messages, all others in the root inbox folder and in all sub-folders seem OK.
Thanks again for trying.

AMOUNTS ARE NOT REFLECTING CORRECTLY IN REPORT MB51 REPORT.

Hi Experts,
I am facing some issue regarding Report MB51. We have sold some material say "X" for the month of Sep. Now when I run the GL for particular store from where we have sold the material it shows sales value for the period. But when I run the report MB51 for material "X" it shows me some different value. Can anyone tell me why it is showing the difference.
Regards

Post Author: V361
CA Forum: General
You may want to select the "no Printer" option instead, this will force CR to use a higher resolution. Look in page setup, printer options.

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help me

Please send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

PDFs are not shown correctly at more than 150% size

Hi,
we use Adobe Reader 8.1.2 and we can´t change it in our company.
we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
Does someone have the same problem AND a solution?
Hajo

Hi,
I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

Changes are not Reflecting in WAD

Dear Gurus,
I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
Thanks,
Sony

Hi Sony,
SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
Once this is done, ask basis to restart the java engine.
I hope this helps you.!
-Pradnya
Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Treloaded. Getting a message "iTunes not installed correctly" Error 7 Windows Error 998. Removed and retried install got same message??????

Trying to install iTunes on my XP machine after the operating system was reloaded. Getting a message "iTunes not installed correctly" Error 7 Windoes Error 998. Removed and retried installgot same message??????

This can sometimes indicate that one of the other itunes-related software components is damaged. (Usually Apple Application Support, but there are other possibilities beyond that.)
Perhaps first try a complete uninstall/reinstall as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Does that get you past the 7?

LPA changes are not reflected fully in 2LIS_02_SCL

The changes done to scheduling agreement, schedule lines are not reflecting in 2LIS_02_SCL, and there by resulting errors in delta update in BI system.
For example
     LPA     RM     SCL     Quantity                                    (2LIS_02_SCL)
ODS(A)      3001             15          800
ODS(C)     3001     X     15          300
     3001          15          800
PSA      3001     X     15          400
        3001             15          900
As we are using the Update type Addition,
From PSA, it is clear that the change is 500; this change got reflected in ODS properly.
But when I compare ODS data with EKET data,
LPA     SCL     ODS(Active)          EKET
3001     15     800               900
As you can see wrong validation results between BI & R3
I am missing the below changes happened to SCL in the extractor
     3001     X     15          300
     3001          15          400
The missing above entry is resulting errors.
Does anybody know how the EKET line changes can be tracked?
How to check the V3 Update, we checked the program: RMBWV302
Does anybody have idea where to track this error.
Note: the above case is happening to only a for few documents
Regards,
NK.A
Message was edited by:
        nandakumar a

Hi Renjith,
Thanks for the reply. Can you please let me know few more answers to the below points.
As the datasource 2LIS_02_SCL does not takes this event into account (only MA, MB, MC and MD), this field is not passed to BW (you can see the events per datasource in transaction LBWE)
You are referring to posting of the Material Ledger posting right ? Can you please give some more information about MA MB MC MD as I have verified in LBWE and could not find anything about it except that its picking that GLMNG value from MCEKET table.
Renjith, Please update your views on the below query. I am not able to get any answers from anyone on this query. I appreciate your reply.
In my opinion you would be able to fill it in the customer-exit of LIS (EXIT_SAPLEINS_001) or BW (EXIT_SAPLRSAP_001)
If I add a zfield to the SCL DS and then populate that field with the code in the include ZXRSAU01 , EXIT_SAPLRSAP_001 in that going to help.
Do I have to verify the events MA MB MC and MD while populating this zfield or I can just do a direct lookup on EKET
select single * from EKET
where EBELN = l_MC02M_0SCL-EBELN
and EBELP = l_MC02M_0SCL-EBELP
and ETENR = l_MC02M_0SCL-ETENR will do ?
So when ever the ds fields are getting populated in the org DS ...it will find this zfield in the same structure and will fill this field. Is that going to fix it ? I have also found couple of SAP Notes on the same issue and do you think implementing those notes will fix the problem without the zfield or code.
Could you please check out these notes 100690 and 431145. Please suggest.
Thanks,
Daniel

Messages are not moving to Error Queue in OSB if Error is Raised

Hi All,
My OSB process is as below.
Queue1-->OSB-->Queue2.
OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
Can any one please help me on this?
Thanks.
Edited by: 892479 on Dec 21, 2011 6:31 AM

Since the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
Now the problem yu face is that the messages are not moving to error queue.
Make sure that you have configured following in the delivery failure tab of the queue>
Redelivery Delay Override - delay in miliseconds between retries
Redelivery Limit - number of retries
Expiration Policy - Redirect
Error Destination - Choose the error queue here
After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart.

German umlauts are not shown correctly, when a received e-mail is opened the first time. What can I do?

When I open a received e-mail the first time, German umlauts (ä, ö, ü) are not shown correctly. Instead of them there are characters like §,$. When I close the e-mails and open them again the German umlauts are shown correctly. I don't know how to solve that problem. Who can help me?

''Zenos [[#answer-670786|said]]''
<blockquote>
Fascinating. Sounds like an inconsistency between the encoding being used and the encoding being declared. I can't think why it should change when you re-open the message, unless Thunderbird is adding a correct encoding declaration.
(Most users complain about it working in the opposite direction; messages stored as drafts often restore with damaged "special" characters such as smart quotes, accented characters and umlauts.)
</blockquote>

R/3 numbers are not reflected in APO

HI
i transfered planned order from PPDS to R/3. it successfully CIFed as production order but R/3 production orders are not reflecting in APO. all integration models are in active status. what will be the reason

Hi Thennarasu,
One or more of the input products(components) have special procurement key set in R/3 material master for withdrawal from another plant.
Planned orders are changed in SAP APO and then the conversion indicator is set to initiate conversion into a manufacturing order.
But the queue from SAP APO to SAP R/3 hangs with an error message that indicates that the material in question is not maintained in the certain storage location of a specified plant.
As a result, the planned order is not converted.
Check to maintain the storage locations in customising - Enterprise Structure->Definition->Materials Management->Maintain Storage locations. Here maintain the storage locations of the Plant from which you are procuring the components under the Plant which requires them.
Please confirm
Regards
R. Senthil Mareeswaran.

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

Messages are not reflecting correctly

Similar Messages

Maybe you are looking for