Messages are set to "To be delivered "

Hi,
we are having a problem in XI adapter engine.
all the messages are being set to be delivered
we are finding this status as "to be delivered" after we disconnected the target systems as we are moving our servers to a different location
but if the target systems are missing then we should get as system error at adapter engine with status as "server could not be found".
dont understand why am getting "to be delivered" as this is addressed to engine queue to the receiver system.
we did the following steps assuming as short of resources for XI
1)SXI_CACHE( no use)
2)we restarted the engine buy restarting the Adapter engine application
3)we restarted the XI server.
can anyone provide valuable inputs on this.
Thanks & Regards,
Rama Krishna

Hi,
As others said, since your sender side has no problem so it will pic the file on given intervels and send it to receiver system.
The message "to be delivered" comes when receiver system is not reachable. Here in RWB it will not say "could not found server" since configuration of receiver connections will be still there in SLD, but your server has been disconnected and moved PHYSICALY to different location. This is the reason your are getting the message "to be deliverd". Once your system will be up and runnig you will not get this message.
Regards,
Sarvesh

Similar Messages

Messages are stuck in "delivering" status

Hi
We are doing Async RFC to JDBC Scenario. Messages are successful from R/3 to XI but getting stuck at receiver jdbc adapter . subsequent message are also stuck because of this
Below is the audit log of the message
2007-06-29 10:33:08
Success
The message status set to DLNG.
2007-06-29 10:33:08
Success
Delivering to channel: CS_CUS_PS_MAINTENANCE
2007-06-29 10:33:08
Success
MP: entering
2007-06-29 10:33:08
Success
MP: processing local module localejbs/CallSapAdapter
2007-06-29 10:33:08
Success
Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2007-06-29 10:33:08
Success
JDBC adapter receiver channel CS_CUS_PS_MAINTENANCE: processing started; party , service BUS_MES
After then it just hangs and it shows "delivering" status only
There is no error in SXMB_MONI
Any clues!!!!!!!!!!!!!!
Regards
Vijay

Vijay,
The queues in adapter are different from the queues in Integration Engine.
You can restart failed msg in adapter queues also. Stefan Grube has shown this in a weblog. Just do a search, you will get the blog.
Regards,
Jai Shankar

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Messages are in To be delivered state in the Adapter engine

Hi,
For all the receiver file adapters the messages are successful processed through Integration Engine ,no messages are stuck in SMQ1 & SMQ2 on Inegration engine.
All the messages are stuck in Adapter Engine with the status "To be Delivered ". These are all asynchorus scenarios. The quality of service is also EO.
We restarted the J2EE engine also several times but no luck.
Did anyone had similar issue?
Thanks
Sachin

Hi,
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords and tcode - SXMB_ADM and "active" the queue then the messages and check it out.
Regards
Agasthuri Doss

Messages are in to be delivered status

Many messages are in to be delivered status in the adapter engine message monitoring
Can any body help regarding this

Hi Sandeep,
     Would you explain a little bit more your issue?
     i.e:
     This kind of messages are Sync Messages?
     Do you have more than one message in Interfaces Determination object?
     If multiple inbound interfaces are assigned by the interface determination, the messages are forwarded according to the quality of service Exactly Once in Order (EOIO) at runtime. This means that the order in which the inbound interfaces are entered in the interface determination determines the order in which the messages are received.
     You can change this default by deselecting the Maintain Order at Runtime checkbox. In this case, the quality of service Exactly Once (EO) is used to forward the message to the inbound interfaces.
Regards,
Luis Diego

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

Exchange Server 2013: incoming messages are not delivered into user mailboxes occasionally

Exchange Server 2013 CU1, two mailbox servers (DAG, only one mail database), two CAS servers (NLB cluster). Two Sendmail/CentOS-based SMTP relays route mail between Exchange servers and Internet (incoming mail is routed to NLB cluster name).
Usually mail flow is OK: messages are sent and received normally. However, I've got several complains from different users. They state that occasionally they don't receive messages that were sent to them from outside. Tomorrow morning I've decided to
investigate the issue.
So, we have a message sent from Gmail account that was not delivered in user mailbox. It was received and routed to Exchange by Sendmail host:
Jun 27 22:06:37 MX01 sendmail[12169]: r5RG6HC8012166: to=<USER_ADDRESS>, delay=00:00:19, xdelay=00:00:19, mailer=smtp, pri=124702, relay=NLB-FQDN [NLB-IP], dsn=2.0.0, stat=Sent (<CAHgK_sjEkj41htuVsutMP3XhgR5RRDs8-EgSC-UfHoaiHWFj=A@mail.gmail.com>
[InternalId=13069585481819] Queued mail for delivery)
Running Get-MessageTrackingLog applet on the mailbox servers displayed the followed log entries for the message:
DB Server #1:
    22:11:18 HAREDIRECT
    22:11:18 RECEIVE
    22:11:18 AGENTINFO
DB Server #2:
    22:11:18 HARECEIVE
    22:12:44 HADISCARD
So, we can see that the message was placed into shadow queues, but was NOT delivered into mailbox (no DELIVER status entries). Also pay attention to the timing. Time on all the servers is in sync, but Sendmail timestamp is 22:06, and Exchange timestamps
are 5 minutes behind it.
Today a message sent to the same address from the same Google mailbox was received by Exchange and placed into user mailbox with no glitches.
We use Exchange antispam system activated on Exchange mailbox servers. Spam is never dropped silently. It is either returned to sender (SCL 9) or placed into quarantine mailbox (SCL 6 and above). I'm pretty sure that the lost message was not in the quarantine
mailbox this morning, and the sender didn't receive any NDRs.
Any ideas what to investigate next?

Hi,
Do you mean the emails are placed in the Shadow Redundancy queue?
Shadow Redundancy
http://technet.microsoft.com/en-us/library/dd351027(v=exchg.150).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

My text messages are not being delivered

MY text messages are not being delivered. Keep coming back with the red saying "Not Delivered". Anyone know why this all of a sudden started happening and how to fix it?

Thank You Meg St._Clair contacted my carrier and fixed the problem on my iPhone 6 but still an issue on my iPad mini
Carrier could not fix the problem so said I would have to plug my iPad into my Mac and back it up and then restore factory settings
Havent done any of that yet!

After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

ORABPE-31015: Cannot get Object part 'Responses'. No parts are set message

Hi All,
I facing an issue while sending a email notification.
[default/NotificationsBPMProject!1.0*soa_d31bba5a-2fb8-406a-aba3-f338ad25ff87.BPM-NotificationService]:sendEmailNotification Performing outbound request/response interaction..
[2012-07-11T06:37:43.089-07:00] [AdminServer] [ERROR] [] [oracle.soa.services.notification] [tid: orabpel.engine.pool-11.thread-30] [userId: <anonymous>] [ecid: 11d1def534ea1be0:-1867a3ef:138757942e8:-8000-0000000000004582,1:23774] [APP: soa-infra] <.> Error while sending notification.[[
Error while sending notification to email.
Check the underlying exception and fix it.
ORABPEL-31015
Error while sending notification.
Error while sending notification to email.
Check the underlying exception and fix it.
     at oracle.bpel.services.notification.NotificationService.sendEmailNotification(NotificationService.java:475)
     at oracle.bpel.services.notification.NotificationService.sendEmailNotification(NotificationService.java:447)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.integration.wsif.providers.java.WSIFOperation_Java.executeRequestResponseOperation(WSIFOperation_Java.java:1048)
     at oracle.integration.platform.blocks.wsif.WsifReference.request(WsifReference.java:636)
     at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
     at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:182)
     at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:154)
     at sun.reflect.GeneratedMethodAccessor4653.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy316.request(Unknown Source)
     at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:777)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:267)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1070)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:584)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:132)
     at oracle.bpm.bpmn.engine.model.runtime.microinstructions.MIInvoke.doExecute(MIInvoke.java:42)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MISequenceBlock.doExecute(MISequenceBlock.java:68)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callMicroInstruction(MicroInstructionContext.java:201)
     at oracle.bpm.bpmn.engine.microkernel.MICall.doExecute(MICall.java:38)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MISequenceBlock.doExecute(MISequenceBlock.java:68)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callMicroInstruction(MicroInstructionContext.java:201)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callProcedure(MicroInstructionContext.java:208)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.executeProcedure(MicroInstructionContext.java:325)
     at oracle.bpm.bpmn.engine.model.runtime.MIBPMNActivityWMP.executeProcedure(MIBPMNActivityWMP.java:391)
     at oracle.bpm.bpmn.engine.model.runtime.MIBPMNActivityWMP.__executeStatements(MIBPMNActivityWMP.java:308)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:166)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2687)
     at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1190)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1093)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:76)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:218)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:297)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4609)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4540)
     at com.collaxa.cube.engine.CubeEngine._expireActivity(CubeEngine.java:1562)
     at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:1477)
     at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:82)
     at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:57)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy413.expireActivity(Unknown Source)
     at oracle.bpm.bpmn.engine.ejb.impl.BPMNActivityManagerBean_eh2l9c_ICubeActivityManagerLocalBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
     at oracle.bpm.bpmn.engine.ejb.impl.BPMNActivityManagerBean_eh2l9c_ICubeActivityManagerLocalBeanImpl.expireActivity(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:41)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:64)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at com.collaxa.cube.engine.dispatch.Dispatcher$ContextCapturingThreadFactory$2.run(Dispatcher.java:850)
     at java.lang.Thread.run(Thread.java:662)
Caused by: javax.naming.NameNotFoundException: While trying to look up comp/env/ejb/services/NotificationServiceBean in /app/ejb/oracle.bpm.runtime.bpmn-engine-ejb.jar#BPMNActivityManagerBean.; remaining name 'comp/env/ejb/services/NotificationServiceBean'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.ApplicationNamingNode.lookup(ApplicationNamingNode.java:144)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
     at weblogic.jndi.factories.java.ReadOnlyContextWrapper.lookup(ReadOnlyContextWrapper.java:45)
     at weblogic.jndi.internal.AbstractURLContext.lookup(AbstractURLContext.java:130)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at oracle.bpel.services.notification.NotificationUtil.lookupLocalBean(NotificationUtil.java:577)
     at oracle.bpel.services.notification.NotificationService.sendEmailNotification(NotificationService.java:467)
     ... 84 more
[2012-07-11T06:37:43.094-07:00] [AdminServer] [ERROR] [] [oracle.soa.wsif] [tid: orabpel.engine.pool-11.thread-30] [userId: <anonymous>] [ecid: 11d1def534ea1be0:-1867a3ef:138757942e8:-8000-0000000000004582,1:23774] [APP: soa-infra] WSIFBinding=> [default/NotificationsBPMProject!1.0*soa_d31bba5a-2fb8-406a-aba3-f338ad25ff87.BPM-NotificationService]:sendEmailNotification WSIF Exception occured. Please check stack trace Cannot get Object part 'Responses'. No parts are set on the message
[2012-07-11T06:37:43.096-07:00] [AdminServer] [ERROR] [] [oracle.soa.bpmn.engine.ws] [tid: orabpel.engine.pool-11.thread-30] [userId: <anonymous>] [ecid: 11d1def534ea1be0:-1867a3ef:138757942e8:-8000-0000000000004582,1:23774] [APP: soa-infra] got RuntimeException[[
oracle.fabric.common.FabricException: Cannot get Object part 'Responses'. No parts are set on the message
     at oracle.integration.platform.blocks.wsif.WsifReference.request(WsifReference.java:698)
     at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
     at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:182)
     at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:154)
     at sun.reflect.GeneratedMethodAccessor4653.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy316.request(Unknown Source)
     at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:781)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:267)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke(InvokeHandler.java:1070)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke(InvokeHandler.java:584)
     at com.collaxa.cube.engine.ext.common.InvokeHandler.handle(InvokeHandler.java:132)
     at oracle.bpm.bpmn.engine.model.runtime.microinstructions.MIInvoke.doExecute(MIInvoke.java:44)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MISequenceBlock.doExecute(MISequenceBlock.java:68)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callMicroInstruction(MicroInstructionContext.java:201)
     at oracle.bpm.bpmn.engine.microkernel.MICall.doExecute(MICall.java:38)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MISequenceBlock.doExecute(MISequenceBlock.java:68)
     at oracle.bpm.bpmn.engine.microkernel.MIBase.execute(MIBase.java:34)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callMicroInstruction(MicroInstructionContext.java:201)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.callProcedure(MicroInstructionContext.java:208)
     at oracle.bpm.bpmn.engine.microkernel.MicroInstructionContext.executeProcedure(MicroInstructionContext.java:325)
     at oracle.bpm.bpmn.engine.model.runtime.MIBPMNActivityWMP.executeProcedure(MIBPMNActivityWMP.java:391)
     at oracle.bpm.bpmn.engine.model.runtime.MIBPMNActivityWMP.__executeStatements(MIBPMNActivityWMP.java:358)
     at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:166)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2687)
     at com.collaxa.cube.engine.CubeEngine._handleWorkItem(CubeEngine.java:1190)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1093)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:78)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:218)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:297)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4609)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4541)
     at com.collaxa.cube.engine.CubeEngine._expireActivity(CubeEngine.java:1562)
     at com.collaxa.cube.engine.CubeEngine.expireActivity(CubeEngine.java:1477)
     at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:82)
     at com.collaxa.cube.ejb.impl.CubeActivityManagerBean.expireActivity(CubeActivityManagerBean.java:58)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy413.expireActivity(Unknown Source)
     at oracle.bpm.bpmn.engine.ejb.impl.BPMNActivityManagerBean_eh2l9c_ICubeActivityManagerLocalBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
     at oracle.bpm.bpmn.engine.ejb.impl.BPMNActivityManagerBean_eh2l9c_ICubeActivityManagerLocalBeanImpl.expireActivity(Unknown Source)
     at com.collaxa.cube.engine.dispatch.message.instance.ExpirationMessageHandler.handle(ExpirationMessageHandler.java:41)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:140)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatchTask.java:88)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:65)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
     at com.collaxa.cube.engine.dispatch.Dispatcher$ContextCapturingThreadFactory$2.run(Dispatcher.java:850)
     at java.lang.Thread.run(Thread.java:662)
Thanks,
TK

Only one user. Basically i have many notification activities, all of them are working but i have a notification activity in the UN-interrupting Boundary Event flow which is causing the issue.
Thanks,
TK

Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. W

Recently downloaded a trial version of CC and when trying to use the Adjustment Brush in ACR it brings up the message 'All the local adjustment controls are set to have no effect on the image'. I've downloaded this as an update to CS5 on my new i Mac. Would appreciate suggestions to remedy this. Rhonda

I think it means "the sliders are all 0 so painting adjustments with this brush won't change anything." In other words, move one of the sliders to a non-zero position, for example Exposure from 0 to 1.0, and then see what happens. You can edit the brush and change it to do something other than Exposure +1.

What do I do with this error message: To use this library, make sure its file permissions are set correctly.

So I cannot even access the application. It was working fine yesterday and today I get this error message:
To use this library, make sure its file permissions are set correctly.
I have changed nothing. All the pictures are there on the computer. Help?!

Reboot. Close any programs which open at start-up. Run Disk Utility (you can type this in the Spotlight search field at the right end of your Menubar).
In Disk Utility, select your drive from the list on the left, and click "Repair Disk Permissions". This will take a few minutes, but should be less than ten.
Reboot.
Try to open your Library in Aperture. What happens?

TA25179 my text messages are coming through out of order and i have checked the time setting and the software version. Everything is up to date! Very frustrating... any other suggestions?

My text messages are coming through out of order! I have checked the software and the time setting is on automatic!! Very frustrating... any other advice??

When reception allows the iPhone sends and receives the messages, this is also dependent on the reception of the other phone you are communicating with. If you really feel you have a problem, contact your Carrier about the problem.

Messages are set to "To be delivered "

Similar Messages

Maybe you are looking for