Messages fail in PI with error "Message ID already exists in database"

Hi Guru's,
The scenario is from FILE->PI->MDM .
Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
Please help me out .
Attached the full trace in PI :
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

Hi Gowtham,
Can you check once whether message gets failed after it is automatically restarted.
Check traces for each defined pipeline.
I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
Also check with basis team on tablespace issue.
Regards
Jitender

Similar Messages

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
     ditto -h | --help

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

Can't reinstall itunes on windows 7 comp. Get error message "object already exists"

Difficulty reinstalling itunes on Windows7 machine. Despite uninstalling everything apple, I constantly get error message: "object already exists" and the install fails. I have gone through hard drive but can't find anything itunes or apple. Uninstalled everything apple in control panel. What am I missing?

Try opening Control Panel > Programs and Features > View installed updates then checking for the Security Update for Microsoft Windows (KB2918614). , Uninstall if you have it, then reboot.
There is a strong hint here that it should resolve this issue, although personally I have that update installed and have been able to remove and reinstall iTunes without any problem.
Click for more on KB2918614 which is an update to the Windows Installer Service released July 12th 2014. The timing and nature of the update suggest a connection with the "Object already exists" issue which affects other installations as well as iTunes.
tt2

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???

Item or object?
For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I uninstalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "Object already exist". Can anyone help?

I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?

jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR

I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?

I unstalled Photoshop Elements 12 from my computer andnow when I'm trying to re-install I'm getting an error message "objext already exist". Any suggestions on how to correct this?

jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR

When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How can I fix this problem?

When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists." The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same. How can I fix this problem?
Thanks
Candy777

HT2500 Error when deleting email: Apple Support Communities

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

Back up all data. Rebuild the mailbox. Try again to delete the message.

ITunes fails to install with error Ox800736FD. Any ideas?

iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVD

Ox800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

Messages fail in PI with error "Message ID already exists in database"

Similar Messages

Maybe you are looking for