Messages failed in

Hello All,
Around 400 messages failed in Outbound queue of IE in SAP PI. All these messages are going towards SAP.
The reason behind the failure is connection issues with the SAP.
Question is, Is it possible to resend all these messages from PI once SAP is availble?
Regards,
Moorthy

Hi Dasika,
You can resend the messages from Runtime workbench , or SXMB_MONI also (there is an option to resend manually), if the number of message is large , you can shedule a batch job.
Could you please look at this blog /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically if it helps you .
please refer similar posts
Collect and Resend messages when SAP(R/3) is unavailable
During SAP outages,XI unable to send the IDoc to SAP System.
Regards,
srinivas
Edited by: Srinivas on Apr 2, 2010 9:56 AM

Similar Messages

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

Try reentering the password in your iCloud mail settings.

I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test.

All of a sudden I can't send or receive messages on iPad. Iphone is working fine. It gives me "message failed to send" and is green instead of blue. The only thing I have done differently is turn iCloud on in my iPhone.

cant receive or send messages on my iPad. Keep getting "message failed to send" and it is green instead of blue. This happened after I turned on iCloud on my iPhone. Would that have anything to do with this problem? It's like its not sincing to my phone but I can send & receive emails ok.

iOS 7.1.2, huh? It MAY be having some trouble with the iOS 8.x devices and latest iCloud features. Although it meets the minimum system requirements, it does not meet the recommended ones - System requirements for iCloud - Apple Support
You should try Restart or reset your iPhone, iPad, or iPod touch - Apple Support - this is generally the first step in troubleshooting, all devices - for all time
Message Colors
Blue is iMessage (Apple service)
Green is SMS (Carrier service)
What happens when you use your iPad similarly? (what iPad model & iOS version)
As a last resort*, Use iTunes to restore your iOS device to factory settings - Apple Support - *this document tells that all your data will be lost but provides steps to back-up (Before section) then restore your data (Restore section #4)

For 'Reason' if you get the message "Failed to Open MIDI Support Library"

I tried to open Reason 3.0.5 with an MBox 2 on my new MacBook Pro (Leopard) and I got this message: 'Failed to Open MIDI Support Library.' When I went to my 'Audio-MIDI' setup on my Mac, nothing loaded properly...
I found the solution to this problem after looking around online, and figured other people might be having the same problem, so here it is...
First, create a new folder on your computer desktop and call it "Old MIDI Drivers" (or something similar), then go to Macintosh HD>library>audio>midi drivers, and move all the drivers (that you don't plan on using) from that folder into your "Old MIDI Driver" folder on your desktop. For example, I moved all the drivers out except for my MBox 2 driver.
After you do this, you may have to restart your comp. (I didn't) and Reason should run.
Hope this helps...

(No biggie, but if you mark your own post as 'Answered' then people searching for answered posts will be able to find it more easily…)

Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

I'm trying to load my newspaper and I keep getting the error message Failed to Load Kiosk, I've done a restore but no joy - any ideas?

I keep getting the error message Failed to load kiosk when trying to upload my copy of the Times, I have done a restore but that hasn't worked - any ideas how to get the kiosk back and functioning again? All software is up to date.
many thanks

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use. PLease try again later

What program are you using? And what version?

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I have a pc and am using windows 8

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

B2B Message Error - Decrypting S/MIME message failed

Hi,
Am getting following error when i receive the inbound message from trading partner
I have set up the certificates on both sides.
[2010-04-15T19:53:18.981-04:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@a8acf9] [userId: <anonymous>] [ecid: 0000IW2gpmo7MAYVLqBT8A1BlpVK00000E,0] [APP: soa-infra] [composite_name: StockXferRecSOA] [component_name: StockBPEL/StockXferReciptService] [component_instance_id: 310009] Error -: B2B-51093: Decrypting S/MIME message failed {0}.[[
Error -: B2B-51093: Decrypting S/MIME message failed {0}.
     at oracle.tip.b2b.packaging.SmimeSecureMessaging.decrypt(SmimeSecureMessaging.java:1024)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processEncryptedMimeBodyPart(MimePackaging.java:1107)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processInputStreamOrStringMessage(MimePackaging.java:1173)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processMessageContent(MimePackaging.java:793)
     at oracle.tip.b2b.packaging.mime.MimePackaging.doUnpack(MimePackaging.java:726)
     at oracle.tip.b2b.packaging.mime.MimePackaging.unpack(MimePackaging.java:632)
     at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1583)
     at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1395)
     at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:3216)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:2960)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2706)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:540)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:200)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:77)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2010-04-15T19:53:18.981-04:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@a8acf9] [userId: <anonymous>] [ecid: 0000IW2gpmo7MAYVLqBT8A1BlpVK00000E,0] [APP: soa-infra] [composite_name: StockXferRecSOA] [component_name: StockBPEL/StockXferReciptService] [component_instance_id: 310009] Error -: B2B-51093: Decrypting S/MIME message failed {0}.[[
     at oracle.tip.b2b.packaging.SmimeSecureMessaging.decrypt(SmimeSecureMessaging.java:1024)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processEncryptedMimeBodyPart(MimePackaging.java:1107)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processInputStreamOrStringMessage(MimePackaging.java:1173)
     at oracle.tip.b2b.packaging.mime.MimePackaging.processMessageContent(MimePackaging.java:793)
     at oracle.tip.b2b.packaging.mime.MimePackaging.doUnpack(MimePackaging.java:726)
     at oracle.tip.b2b.packaging.mime.MimePackaging.unpack(MimePackaging.java:632)
     at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1583)
     at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1395)
     at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:3216)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:2960)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2706)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:540)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:200)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:77)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2010-04-15T19:53:18.981-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@a8acf9] [userId: <anonymous>] [ecid:
Thanks,
Arun Jadhav

Hi Arun,
Problem is that B2B is not able to decrypt the incoming message. There could be two possible reasons behind this -
1. Your TP is not encrypting the message from your client certificate's public key (you should provide your client cert's public key to your TP and ask them to use that for encrypting the messages)
2. You have not set up the corresponding private key at your B2B (in Host TP configuration and in deliver channel configuration of host TP)
Please paste the complete log here/mail it to my id.
Remote trading partner should encrypt the message using your your client cert's public key and you should decrypt it using your private key.
For this ask your trading partner to encrypt the message using your provided public cert and at your side select the same cert in the delivery channel of your host DC under encryption credential. Make sure that keystore is containing this cert's private key.
Regards,
Anuj

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.

Hi
I am trying to process an X12 message and I am getting following error.
Method : ProcessMessage
Message : Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.
Parameter name: length
   at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
   at Q.Inbound.X12Preprocessor.getTranTypeFromFuncCode()
   at Q.Inbound.X12Preprocessor.setProcessType()
   at Q.Inbound.X12Preprocessor.getFuncGroupHeader(StreamReader sr)
   at Q.Inbound.X12Preprocessor.ProcessMessage(X12Definition& docInfo)
Please help.
Thanks

Might try them over here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral%2Cvbgeneral%2Cvcgeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

A link in a thunderbird message fails to activate firefox but if i copy & paste it in the ffx location bar, it goes to the linked web page

a link in a thunderbird message fails to activate firefox but if i copy & paste it in the ffx location bar, it goes to the linked web page. Also, some web page links are failing except that some will work if i use right-click with open in new tab. just updated ffx to 3.6.13, then updated java per mozilla notification (plugin checker)

Hi Larry,
Thanks...that was one of the things I first tried. I did a save as another document.
I also resized the image in PS so it would be at 100% of size, figuring that would help and I made the image box's background white instead of none, but nothing so far.
It almosat seems like it is coming from the origianl template file?
Babs

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

Auto restart of messages failed in Adapter Engine PI 7.0 and 7.1

Hi,
I am trying to figure out a way to automatically restart the messages failed with in the adapter engine (because of the target system not available etc.). These messages are in System Error status and I can restart them from RWB. But I am looking for any report or something available either on Java or ABAP engines so that I can automate the process.
Thanks for the help.
VJ

I have come across the web service AdapterMessageMonitoring in PI 7.0 (Found it in Web service navigator) with possibly useful methods. But I could not find the same service on PI 7.1. Any clue on this?
Also, the getMessageList methods works perfectly as expected but the resendMessages mehtod fails with the exception -
com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Exception in method resendMessages.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException>
Will post more if move forward.
VJ

Messages failed in

Similar Messages

Maybe you are looking for