Messages format inside Message-Store

Hi everyone,
any idea about how to deny (vi/more/less/cat) read access to *.msg files inside message store?
Is there a way to "crypt" or change (maybe from ascii to data) the way to store messages file on File System ?
Thank you for replies..........
Caius

Any mechanism for encrypting the files on disk would require the server to have access to the key to decrypt the data. The admin would also have access to that key and therefore also be able to decrypt it.
If your concern is access to the data while the disk is no longer connected to the server, you could use file system level encryption like available with ZFS.
The best end-to-end encryption solution is for the user to send the mail using a mail client that supports S/MIME.

Similar Messages

  • Sun Messaging Server message-store inside zone (container)

    Hi Guys,
    i'm running Sun Messaging Server 7.3-11.01 (64bit, sparc).
    Do you now if message-store inside a zone is supported?
    Thank's in advance!
    Caius

    Yes, it is supported. For more info see [Installing Communications Suite on Solaris Zones|http://wikis.sun.com/display/CommSuite7/Installing+Communications+Suite+on+Solaris+Zones].

  • Connector error message stores

    I recently upgraded computers and now have Outlook 2010 and Windows 7. Haven't been able to sync Curve to Outlook since. Getting message "Microsoft Outlook Connector Error" as title and then "No Available Message Stores". Any ideas on how to solve this? Thanks much!

    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB15564"No available message stores" appears when configuring synchronization settings in BlackBerry Desktop Software
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Microsoft outlook connector error: no available message stores

    Any assistance out there on the 2010 MS OFFICE PRO - - upgraded from 2003 and having difficulties sync-ing the device.
    "Got a Microsoft Outlook Connector Error - - No Available Message Stores"
    Read a few post(s) and it appears that 2010 Office Pro was not yet tested when during Beta period...  Does anyone have any fix for this problem...
    Thanks!
    Norbert

    Hi there,
    There are lots and lots of threads in these forums of folks that are either 1) angry in that they thing RIM is going too slow or 2) truly trying to help each other out. The formal response is that 2010 is not yet supported by the RIM DTM software and no expectation of when that shall happen can be provided.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • "No Availabel Message Stores" Normal fixes not working

    Hello,
    I have a Blackberry Storm with the Desktop Manager Software version 5.0.1.  I just installed Windows 7 (32-bit) and Office 2007 and now when I attempt to sync the device with my calendar, contacts, tasks, etc I receive the message "No available Message stores".
    I have already tried renaming the mapi32.dll to mapi32.dll.old and running the fixmapi.exe resolution to no avail.
    Note that everything worked fine when I had Outlook 2007 installed in VISTA 32-bit.  I do not believe it is a problem with Windows 7 though from what I've read.
    Any help would be greatly appreciated.
    Thank you.

    Hi and Welcome to the Forums!
    Here is the KB concerning that error message -- there are other resolutions beyond what you attempted. However, normally, that error is displayed when configuring synchronization...you said it presented when you attempted to sync, which would mean that you successfully configured it. Can you clarify please?
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can Lync messages store at local in stead of on server?

    Hi All,
    Lync is convenient and helpful to communicate inside company.
    I used to keep old messages since they might contain some useful information,
    but as time goes by, old messages become more and more, and they occupies limited quota on Exchange server.
    Is it possible to let Lync store messages store (or maybe download) to local computer in stead of on Exchange server?
    Thanks.
    Ming-Hung.Hung

    You could do this by exporting the folder from Outlook to a PST, or adding a PST file and dragging and dropping old conversations into it locally.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • "No Available message stores" message and "warning code 0x3b21"

    i have Blackberry 8520, and using blackberry desktop ver 5 installed on windows 7 pro and outlook 2010. when i choose syncronization from configuration menu i recieve "No Available message stores". kindly help

    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB15564 "No available message stores" appears when configuring synchronization settings in BlackBerry Desktop Manager
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No Available Message Stores - Office 2010 Beta

    I am now using Office 2010 and can longer sync my calendar, addresses etc.  I get the message that there is "No Available Message Stores".  Does anyone have a fix.  Windows 7

    ddvogt wrote:
    Message to Blackberry:
    I hope you listen..
    The issue may be that Nokia bought the third party company that was doing the synch under Blackberry.
    Blackberry: You need to fix that problem or switch to another third party. You may otherwise see a vast exodus to Android based phone.
    I hope you have not come to be too big to care about your customers.
    Hello!
    In regards to your hope that RIM will see your message -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unlikely that they will see what you have written. However, if you have specific and constructive ideas for them, I have heard that they accept such via email to [email protected]
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Backing Up and Restoring the Message Store v.s. the queue

    Hello,
    We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
    I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
    However I am wondering about the Queue?
    Under <instance>/imta/queue
    What is the difference between the Message Store
    and the Queue? Can I just backup and restore the Queue using tar or cpio?
    Thanks in advance for any advice.
    Regards,
    Tim

    Hello,
    We are running iPlanet 5.2 Messaging Server and need
    to migrate to another (duplicate) 5.2 Messaging
    Server. We have all the software installed and the
    LDAP user accounts created. Now we just need to move
    the existing mail from one server to the other.
    I found the Backing Up and Restoring the Message
    Store section in the Admin Guide says to back up and
    restore your data, Messaging Server provides the
    imsbackup and imsrestore utilities.
    However I am wondering about the Queue?
    Under <instance>/imta/queue
    What is the difference between the Message Store
    and the Queue? The Message Store is where messages get delivered to, so you can read them.'
    The queue is where messages are temporarily stored, pending delivery to wherever they go.
    You can use tar, cpio, or what have you for the queue. Stop the server first. . .
    You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
    imsimta cache -sync
    to tell the MTA to re-read the queue.
    Can I just backup and restore the
    Queue using tar or cpio?
    Thanks in advance for any advice.
    Regards,
    Tim

  • Berkeley DB XML as Message Store

    Hi,
    I need to build a 'Message Store' (as referred to in 'Enterprise Integration Patterns: Designing, Building, and Deploying Messaging Solutions') for our SOA. Components of the SOA are coupled by JMS / sockets and send XML messages to each other. The central message store would consume all messages and so provide a message history and allow comparison of messages for support, performance measurement, troubleshooting, etc.
    One approach which occured to me would be lightweight Java framework on top of Berkeley DB XML, which would handle connectivity to all integration points.
    All of our messages are small (< 5K) but some types are high frequency (say 2K/s).
    Can anyone comment on this approach pls or share experiences pls?
    Many thanks!
    Pete

    The short answer is that you need to shut down the FastCGI Perl script before you copy the files over, and then re-start it once the file copy is complete. Basically, what's happening is that FastCGI Perl script has cached data in file-system backed shared memory. When you replace the underlying files via an file system copy "under the covers" so to speak, the in-memory and on-disk data becomes out of sync. Subsequent access to the repository can fail in many ways, a core dump is often going to be the result.
    If you don't want to shut down the FastCGI Perl script during the copy, there are several other options that you could consider.
    1) Copy the new files into a new/alternate directory location, stop/re-start the FastCGI Perl script when the copy is complete, pointing to the new location. That minimizes the "downtime" or,
    2) Delete and insert documents one at a time through the API or,
    3) Update documents one at a time through the API or,
    4) Truncate the container and insert the documents.
    Options 2, 3 & 4 will allow the FastCGI Perl script to keep on running, but will probably take more time and may result in larger database files.
    Replication really won't help much if your goal is to completely replace the repository once every 24 hours. The same action would have to be applied to the master and replicated to the other repository locations. The same action of "replace everything" is still occurring.
    I hope that this helps.
    Regards,
    Dave

  • Where does Messages store attachments on the iPad?

    Where does Messages store attachments on the iPad?
    some photos are quite large, so it would be good to know where they go, and how to manage the app.... ;)

    Managing memory usage is not possible because the user does not have access to the file structure (unless you have jail broken your iPad that is).

  • Exchange Server 2010 Move mailbox to database but display MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)

    I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
    but sometimes mailboxes cannot finished and display below error.  I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
    and repeat the move mailboxes action several times.  Then, the move request completed without error. Have any suggestion? Please help. Thank you!
    Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
    Error code: -2147024891
    MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
    Diagnostic context:
        Lid: 18969   EcDoRpcExt2 called [length=132]
        Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
        Lid: 32881   StoreEc: 0x80070005
        Lid: 50035 
        Lid: 64625   StoreEc: 0x80070005
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 56503 
        Lid: 12716   StoreEc: 0x80070005
        Lid: 20794 
        Lid: 28474   StoreEc: 0x80070005
        Lid: 22330   dwParam: 0x0        Msg: 14.03.0123.002:NHK-S08-MBD02
        Lid: 1750    ---- Remote Context End ----
        Lid: 23354   StoreEc: 0x80070005
        Lid: 25913 
        Lid: 21817   ROP Failure: 0x80070005
        Lid: 26297 
        Lid: 16585   StoreEc: 0x80070005
        Lid: 32441 
        Lid: 1706    StoreEc: 0x80070005
        Lid: 24761 
        Lid: 20665   StoreEc: 0x80070005
        Lid: 25785 
        Lid: 29881   StoreEc: 0x80070005
    Context:
    Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)

    Hi Gordon 
    This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
    As suggested by geo try to clean all the DB's first 
    You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
    Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
    Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
    Regards,
    Sathish

  • Error Message when Trying to Sync to MS Outlook 2010, "No Available Message Stores"

    Hi,
    I am trying to Sync My blackberry 8330 Phone with MS Outlook 2010 Beta.
    I can not Sync to any part of MS Outlook (Calendar, E-Mail, etc)  I always get the same error message "No available Message Stores".  Does anyone know what is causing this or how to fix it.
    Specs:
    Windows 7 64 bit
    MS Outlook 2010 Beta 32 bit
    Default Profile
    Blackberry OS V5.0
    Latest BlackBerry Desktop Manager.
    Thanks to anyone who can help.
    -Scoobs
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    A couple of places for you to visit: Blackberry 101   Tips & Tricks
    Take a look at this link:  No available msg stores
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Assign a message store partition using delegated administrator

    Hi!
    i'm using messaging server and delegated administrator that comes in the JES Q5 2005 i'd like to assing the message store partition to the user when i create their account but i can't see any option to do that using delegated administration console. Is there a way to do that.?
    In older delegated administrator versions i could do that.
    Thanks in advance

    It does appear that the current DA does not have this capability. There is a RFE for it in place.
    At present, the only options you have are to:
    1. Use comm-admin to change the partition
    or
    2. Use ldapmodify or Console to make the change in Directory.

  • Best Practice - Message Store size

    Is there a recommended max size for the message store?
    iplanet 5.2

    The offical recommendatin is mostly, "that depends" . . .
    If you intend to do backups, then store partition size depends on backup parallelism and how long you will tolerate backups running.
    If you're talking about maximum size of the store itself, there's no hard limit, only performance limits.
    We have seen large systems, with up to 500,000 users on single boxes, with many hundreds of gigs of store, split up into 40 or 50 partitions work very successfully. On large boxes.
    Better to give us some idea of your needs, and perhaps we can offer advice.

Maybe you are looking for

  • Bootcamp Trackpad Click is NOT Working

    Hi Everyone I have Macbook Pro (A1278) and installed bootcamp and Windows 7 prfessional (x64). in windows 7 the Click(Bottom Left Corner  and Right click(Bottom Right Corner) button is not woking.

  • Kernel extensions in backtrace using iPhoto

    Every time i try to use iPhoto whether it be loading images, editing them or anything else, it ALWAYS crashes and makes the system almost impossible to use.  Even when i repair and rebuild all the databases, it still happens straight after. Its becom

  • SRM POs going to Worklist

    Hi All We are working in ECS, SRM 4. The POs created in HELD status are reaching the Worklist (Maintained under Change Purchase Order) of the Buyer who has approved the shopping Cart. How do we maintain this? Thanks !!

  • Dreamweaver 8 installation on new machine

    Hi all I've just got a new laptop and installed dreamweaver on it. I just want to know if there is any way that you can transfer the list of sites that i have defined on my old computer to my new laptop? Is it something to do with the .reg key Cheers

  • 'Places' gone from photos app (and sometimes iPhone4 too?)

    Hi, I've had my iPad for a week, and yesterday decided to keep the album from iPhoto in which I've kept all the photos I've taken with iPhone on the iPad as a portable archive, they synced fine, and I was well impressed with places picking out all th