Messages get lost between IE and AE (IDoc to SOAP - Async)

Dear Experts,
in a IDoc to SOAP (Async) scenario a message was not transferred. I could not see any error message in RWB or ABAP Monitoring. When I enter RWB, the column engine is "Integration Engine" and the status is "Successful". At the same time other message with the same message interface were transmitted and they have engine "All" and status "Successful".
Why was this message not passed on to Adapter Engine? How can I restart the processing, so that the message is transfered?
Best regards,
David

Thank you for your answers:
@ Divyesh:
I can't resend the message. It does not have an error status. It says "Successful", although it only can be seen in Integration Engine, not Adapter Engine. There are not SM58 errors.
@ Krish:
In ABAP Monitoring all steps were performed as expected. Before and after this message some other messages with the same message interface were transmitted and they are visible in ABAP Monitoring, Inegration Engine and Adpater Engine.
@Hareenkumar:
In SAP everything looks like expected.
The only difference between this message and other messages sent at the same time (which were transmitted correctly) is that in RWB Message Monitoring (Component: Integration Server) the Engine is "Integration Engine" instead of "All". And the message is not visible when you select for component "Adapter Engine".
Do you have another idea?
Thanks in advance,
David

Similar Messages

  • HotSynch Connection gets lost between TE2 and Windows Vista

    I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
    Is there a way to keep them connected long enough to sync?
    The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
    The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
    Thanks!
    Post relates to: Tungsten E2

    Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

  • Differences between rfc and ale/idoc.

    hi ..
           will u please send the differences between rfc and ale/idoc's.

    Hi,
    Please reward with points if helpful................
    ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. There are three layers in ALE system: application services, distribution services, and communication services.
    For communication services, ALE performs a Remote Function Call (RFC) using the port definition and RFC destination specified by the customer model. RFC is used to communicate between applications of different systems in the SAP environment includes connections between SAP systems as well as between SAP systems and non-SAP systems. Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
    Means of creating and operating distributed applications.
    The purpose of Application Line Enabling is to guarantee a distributed, but integrated, R/3 installation. This involves business-controlled message exchange with consistent data across loosely linked SAP applications.
    Application integration is achieved not via a central database, but via synchronous and asynchronous communication.
    Application Link Enabling comprises the following three layers:
    application services
    distribution services
    communication services
    Two Development Models
         Distribution using BAPIs
         Distribution using Message type
    The programming model "Distribution using message types" contains the definitions of message types and IDoc types and the ABAP code for processing inbound and outbound IDocs.
    Defining message types and IDoc types:
    If you want to create message type enhancements for master data distribution, you also have to create a new message type for each enhancement.
    The ALE interface does not allow you to create different segment data for different IDoc types for the same message type.
    Writing ABAP code:
             Outbound Processing
               Inbound Processing
    You can find information on other ALE functions under:
                                   Master Data Distribution
                                  Communicating with Non-R/3 Systems
    1. The Remote Function Call facility allows you to call an R/3 Function module on a “remote” machine.
    2.  To communicate between two R/3 Systems and also with an External System.  External Application program also can call these function module for integration.
    3. RFC or sRFC  - Synchronous RFC
                     aRFC - Asynchronous RFC
                      tRFC - Transactional RFC
                      qRFC - Queued RFC (I.e. Serialization of tRFC)
    Types of RFC Call
    Synchronous
    CALL FUNCTION Func Destination Dest
    CALL FUNCTION func DESTINATION 'NONE' ...
    CALL FUNCTION func DESTINATION ’BACK' ...
    Asynchronous
    CALL FUNCTION func … STARTING NEW TASK taskname
    PERFORMING form ON END OF TASK
    RECEIVE RESULTS FROM FUNCTION func
    Thanks
    sivaparvathi

  • Possiblity of message getting lost

    I am using JCAPS 5.1.2. We have an interface where multiple calls are made at the same time to a particular JMS queue. The connection mode of the JMS queue was connection consumer mode and it frequently used to bring down the integration server. We have changed the connction mode of the JMS queue to serial mode which have bring stability to the integration server.
    My query is , Is there any chance of any message getting lost from the queue, especially when multiple messages are being sent to the queue at the same time while in the serial mode?

    This question really needs to be answered by a Java CAPS expert. I suggest you ask it in the Sun Java CAPS forum at
    [http://forums.sun.com/forum.jspa?forumID=882|http://forums.sun.com/forum.jspa?forumID=882]
    Nigel

  • Messages not syncing between Yosemite and iPad

    I've noticed that messages I send on my iPad seldom appear within messages on my Mac (Yosemite).    Or else they show up like a day or two later but it's not consistent.   Does anybody know how to get them to sync?
    Also, I forgot to mention that the reverse is true, too, but less so.  Very inconsistent syncing. 

    Messages – Fix Syncing Between Mac and IOS
    Messages – Fix Syncing Between Mac and IOS (2)

  • 3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

    3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

    Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

  • Fonts get switched between FCPX and Compressor

    I edit my video, make some simple intro and outro titles with specific fonts (Gill Sans, Adobe Garamond Pro) and although the fonts look fine in Final Cut Pro X when I send the video to Compressor 4 FCPX swaps out the fonts. It's driving me nuts.
    I've run Font Book and verified the fonts and they pass. I've done the share to Compressor twice and both times it swapped out the fonts, each time for different fonts.
    Anyone have this problem or have a solution?
    The video I'm editing hasn't been brought in and optimized, it's H.264 video in place, no audio. Very frustrating.
    Here's a link to the video, you can see three different types of fonts due to the fonts being lost between FCPX and C4. http://www.hawaii247.com/?p=56608

    I spoke with Apple Tech support, the first line told me if I had Adobe CS 5 installed on my system it would break the fonts, and suggested I create a new user, install fcpx under that user, and do my editing from there.  I asked to have the case escalated.
    The second line tech support indicated they have had no reports of this issue, however he was able to duplicate the problem 100% of the time using his "clean system" running Snow Leopard. He said he woulde further escalate the bug to the engineers.
    As as work around he suggested I creat all titles in motion (alpha chanel only) and then bring into fcpx as a .mov file. Great, I only have a few hundred titles..
    I suggest every user that is experiancing this either make a bug report via FCPX or call apple tech support and report it, otherwise it might be way down on the list of fixes.
    So it is a bug, and has nothing to do with fonts, prefs, or Adobe products.

  • Session getting lost between two applications deployed on two WLS versions.

    Hi,
    Jdev version 11.1.1.5.
    I am facing an issue of session being getting lost. Let me explain the scenario.
    Our client has a legacy application(xyz) running on Web logic server(10.3.3). We have developed an application which was deployed on Web logic Server(10.3.5).
    The Legacy application will call the developed application using URL invocation. In the legacy application, the logged in user information is stored in session and the same parameter is appended to URL to call the developed application.
    In the developed application, we have a servlet which reads the URL and based on the parameter appended to it, we set the context of the application. Everything is working fine till here.
    But, in the developed application, we have a link to navigate to the legacy application. Once navigated, in legacy application if the user again calls the developed application, the session which was set earlier is lost.
    Because of this, the context is not getting set in the developed application.
    Is there a way, I can resolve this issue? OR can I raise SR with Oracle to look into it. Please suggest.
    Thanks,
    Umesh

    Thanks Frank for the reply.
    Session sharing was not configured in WLS.
    I was searching for Session sharing and I found this article written by Lucas Jellema. http://technology.amis.nl/2012/01/18/sharing-session-state-between-jee-web-application-through-weblogic-session-descriptor-of-sharing-enabled/
    Here it is mentioned that for session sharing, we need to check the Enable session sharing in weblogic-application.xml.
    My question is do we need to make this change in both the application? i.e Legacy application and developed application.
    And it was mentioned in the article that both the web app were deployed to a single Web Logic Server. But in my case the Legacy application is deployed to 10.3.3 and developed application is deployed to 10.3.5.
    In this case will the session sharing works?
    Any how I will let our client know about this change and will give a try.
    Thanks,
    Umesh

  • Connection lost between SA520 and WAP200

    Hi guys!
    I have a problem with the connection between a SA520 and a WAP200. Following scenario exists.
    SA520:
    two VLANs configured with following settings:
    VLAN1: 192.168.167.1/24
    VLAN2: 192.168.2.1/24
    VLAN1 is for a dedicated network for some private computers connected to port one to four of the SA520
    VLAN2 is for guests and bound to the optinal port of the SA520.
    inter VLAN communication from VLAN1 to VLAN2 is activated.
    One WAP200 is directly connected via ethernet cable to the optional port of the SA520 with following IP: 192.168.2.240/24. Two further WAP200 are existent and repeating the signal to increase the range of the W-LAN.
    Now, if I ping from a computer within VLAN1 to the IP of the WAP200 (192.168.2.240) I get replies from that device. But after some amount of pings the connection between the two devices will be lost (no replies), and after 4 to 10 seconds the connection will be restored again. The weird thing is that I wasn't able to discover a reproducible scenario to hang the connection. Some time the connection between the two devices lives for ten minutes and some times it will break down after 30 seconds.
    Does anybody have a hot tip where the fault for this behavior can be?
    Thanks in advance and best regards

    The Connector 1.0 spec does not provide any API's for testing a connection. The 1.0 RA's dont provide any testing capabilities to allow the container to do so. Even if some 1.0 RA's provide such capabilities, the container cannot rely on these non-standard features. So the container cannot really gaurantee that the connection handed to the application is good. There is no way to know unless the application uses it. The Connector 1.5 specification provides API's for test connections.

  • MailAdapter - Message gets lost

    Hi everyone,
    I have configured a Mail-Adapter configured as a Sender.
    The Adapter polls a message from a POP3-Server and he should deliver the message to a receiving step of the Intergration Process.
    I can tell, from the logs of my mail-server, that the Mail-Adapter polls the message but then the message get's lost.
    It doesn't appear in the XML - Monitoring. In the Adapter - Monitoring I'm able to see that the Mail-Adapter received a message.
    But then the message is never seen again - it went where no men has gone before - the final frontiers - those are the adventures of the message - ship XI
    Any ideas ?
    Thanks in advance,
    Frank

    The iPhone includes RAM (temporary memory) as with your computer.
    Different from the email client used on your computer, the iPhone's Mail app doesn't include an automatic save as Draft every so often while composing a message. When leaving a message while being composed, you are prompted to save the message as a Draft. If the iPhone powers off and you aren't prompted to save the message as a Draft, the message is gone. If the message is not in the account's Drafts mailbox, it is gone. When an iPhone is powered off and on, the RAM is cleared/reset - the same with your computer.

  • Location info lost between iPhone and iPhoto

    On my iPhone, i go to photos -> places, and i get a map showing where my photos were taken. I import them into iPhoto, and go to "places", and I get a blank map and a message telling me how to add the location, or to "import photos with GPS information.
    If I click on the "i" for information on any photo then it is blank.
    1. Does iPhone 4 add GPS info to photos?
    2. should this GPS info be imported into iPhoto?
    3. If the answer to the previous 2 questions is "yes", any ideas on what I'm doing wrong?
    Cheers
    Bert

    Try reinstalling iTunes (no need to uninstall, just download and install the current version). Also, check System Preferences > Accounts > Login Items tab to be sure the iTunes Helper app is there. Finally, you might need to remove and reinstall AMDS:
    http://support.apple.com/kb/HT1747

  • TO get graph between month and value

    Hi Gurus,
    Please help me , i had to make Graph between values and month and for every year lines should be different .
    its basically a stock vs time graph thorough ABAP coding.
    i had itab which have value for every month , but how to plot it i not able to get it.
    please do help me.

    Perhaps have a look at the programs starting GRBUS* (and other GR* entries) as they demo some of your graphical options.

  • GET function fails to get values between 1 and 0

    Hi i have the folowing code
    GET(CONTAVENDAS="PERCVOLUMECORP",FONTEDADO="INPUT",TEMPO="2011.INP",PRODUTO="%SPECIE%_IN",CANAL="NACANAL",ORGCOMERCIAL="NAORGCOM")
    When the value in the PERCVOLUMECORP account, is greater or equal to 1 let's say 80, the get function returns me the correct value, but when i have a value between 0 and one, for instance 0,25, the get function returns 0 (zero)
    Any ideas?
    Thanks in advance.
    Leandro
    Brasil

    Here is the entire script
    **SELECT(%ANO_BD_TRAB%,[YEAR],CATEGORIA,"ID='BDTRABALHO'")
    **SELECT(%ANO_BD_TRAB1%,[YEAR]+1,CATEGORIA,"ID='BDTRABALHO'")
    **SELECT(%ANO_BD_TRAB2%,[YEAR]+2,CATEGORIA,"ID='BDTRABALHO'")
    **SELECT(%MES_INCIO%, STARTMTH, CATEGORIA, "ID='BDTRABALHO'")
    **SELECT(%MESES%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB% AND LEVEL='MONTH'")
    **SELECT(%MESES1%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB1% AND LEVEL='MONTH'")
    **SELECT(%MESES2%,[ID],TEMPO,"MONTHNUM>=%MES_INCIO% AND YEAR=%ANO_BD_TRAB2% AND LEVEL='MONTH'")
    **SELECT(%CONTAS%, [ID], CONTAVENDAS, "TOPDOWNALLOC='Y'")
    *SELECT(%TODOSPROD%, [ID],PRODUTO,"GRUPO='PRODUTO'")
    **SELECT(%SPECIES%, [ID],PRODUTO,"GRUPO='TIPOESPECIE' AND FLAG_TOPDA='N'")
    **SELECT(%SPECIES_IN%, [ID],PRODUTO,"GRUPO='TIPOESPECIE' AND FLAG_TOPDA='Y'")
    *XDIM_MEMBERSET TEMPO = %MESES%,%MESES1%,%MESES2%,%ANO_BD_TRAB%.INP,%ANO_BD_TRAB1%.INP,%ANO_BD_TRAB2%.INP
    *XDIM_MEMBERSET CONTAVENDAS = %CONTAS%,PERCVOLUMECORP
    *XDIM_MEMBERSET PRODUTO = %SPECIES%,%SPECIES_IN%,%TODOSPROD%
    *OLAPLOOKUP VENDAS
      *DIM FONTEDADO="INPUT"
      *DIM TEMPO="2011.INP"
      *DIM PRODUTO="C_IN"
      *DIM CANAL="NACANAL"
      *DIM ORGCOMERCIAL="NAORGCOM"
      *DIM PERCVOL:CONTAVENDAS="PERCVOLUMECORP"
    *ENDLOOKUP
    *FOR %CONTA% = VOLUME
      *FOR %MES% = 2011.JAN
        *FOR %SPECIE% = C AND %SPECIENAME% = CERVEJAS
         *WHEN PRODUTO.SPECIETYPE
         *IS "%SPECIENAME%"
           *WHEN CONTAVENDAS
           *IS "%CONTA%"
             *WHEN TEMPO
             *IS "%MES%"
                    *REC(CONTAVENDAS="%CONTA%",EXPRESSION=LOOKUP(PERCVOL))
             *ENDWHEN
           *ENDWHEN
         *ENDWHEN
        *NEXT
      *NEXT
    *NEXT
    *COMMIT
    Thanks is advance.

  • Idoc to SOAP Async - Sync - stuck @ bpm bridge

    Hi there,
    i'm implementing an SAP -
    Idoc / Async ---> PI -
    > Soap / Sync communication, the idea is that i update the Idoc Status back on erp using and status idoc, i got the whole scenenario working but the Async - Sync bridge part with the status idoc, i've been reading a lot but i cant seem to find a good tutorial that helps me implement the bridge, i found this tutorial :
    https://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29
    do you guys think i can make a workround so i dont have to do a bridge, because performance is a BIG issue on this scenario and i've read that BPM degrades performance,
    Thanks in advance for all the input ill get
    Best Regards,
    Roberto.

    Hi Roberto,
    Idoc doesnot support the synchrnous call. What you can do is send an ALEAUD IDOCs  back as response. Please see this document for this:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?overridelayout=true
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    Also search in SDN for ALEAUD and you may get some more information.
    Regards,
    ---Satish

  • IDoc Data Lost between ECC and MII Message Listener.

    We have recently experienced some network issues which caused the IDoc's to stop flowing outbound from ECC to MII Message Listener.  This happened 3 times during a network switch reconfiguration.  2 of the three occasions the MII Message listener had to be restarted on the MII server in order to get data to flow again.  Interestingly some of the IDocs that were generated during this outage time were processed by the message listener and some didn't.
    We are running MII 12.0 sp11 and ECC 6.0.  The ECC server and MII server are located in different geographic locations.
    When we look at the ECC system in WE05 we see only sucessful status for the IDoc messages saying the Data passed to port OK. 
    When we check the Message listener on the MII end there it only shows processed successfully.  There are no failed messages or messages without rules.
    Where can I check further to see the IDocs that really didn't make it to be processed by the Message Listener on the MII server?
    Also is it possible that these IDocs that got lost somewhere are still sitting on the ECC or MII servers somewhere where we can re-process them?
    And the Last question is, Why didn't the Message Listener handle the network issue automatically instead of needing to restart it?

    Hi Robert,
    Did SAP ever respond/resolve the ticket you created for this issue? Someone told me that this was a known issue, but I have yet to have it verified by SAP. They asked me to simulate the issue - but our non-prod systems are on a VM server with other systems. So I can't exactly start pulling network cables out - I did drop it from the network a few time while sending IDOCs down - but this failed to hang the processing of the IDOCs.
    We're hopefully going to MII 14/15 next year - but the business is keen to resolve this issue as it has impacted production a few times. The MII sites are in some remote regions and I don't think we can really improve the WAN links much further.
    @Christian - thanks for the link, we don't really have an issue with IDOC's not being received, its just the message processing just hangs and we either need to restarted the services or sometimes the system.

Maybe you are looking for

  • Rendering pdf document properly in JSP

    I am currently working on a Portal project, which requires generating a PDF file and passing this to a JSP file providing an option to the user to either view the PDF file or download and save it. I've accomplished the first part of file creation (I

  • Date Validation (MM/DD/YYYY)

    Hey, I need Date Validation. I need to restrict wrong entry of date & previous date also. This can be done either through entry or after clicking on Submit i need to check weather the entered date is valid and it is equal to or after today's date. Da

  • Trying to use migration assistant.

    Trying to move files from an older machine that is running Lion to a machine running Snow Leopard. The machines will not recognize each other. Do I have to upgrade to at least Lion on the target machine?

  • Disabling the xml feed as a canonical workaround

    Hi I have a question and wondered if anyone can advise. I am working on a jewellery site with 150ish products and multiple catalogs - 4 main ones (necklaces, earrings, bracelets & rings) and then many less important ones (beaded necklace, stretch bra

  • Transferring Pages document to iWeb as a blog

    I have created a 3 page 'blog' in Pages 09 using 'Informal newsletter'; 'Photo collage'; and 'Insert 2 columns with sidebar' for successive sheets. I then tried to 'send to iWeb' using 'Pages' . A My blog icon appeared with Pages title & ipsum laurem