Messages going in "To Be Delivered" Mode in RWB

Hello Experts,
Your urgent help needed...
Right now i m suffering from a big problem....
I m sending messages from SAP to Oracle via XI.
for all the messages I am getting acknowledgement back... but if sometimes i will get acknowledgement as "Acknowledgement contains system error" then after that all the messages starts going into "To Be Delivering mode".
After that i used to Restart the server itself and then after 2-3 hrs. suddenly all messages will go into success...
Please tell me what might be the cause... and how to over come this problem...
eagerly waiting for ur replies.........
Please help me out in this problem as soon as possible... If any more clearifications are required then also tell me....
I hv already checked SMQ1, SMQ2 but no messages are there....
In SXMB_MONI it is showing all the messages as success but in RTW->MDT it is showing messages as "To Be Delivered"
So please help me out with this.....
Regards,
Chaitanya.......

Hi Jason,
Have you received any reply regarding this issue? Is it fixed?
We have also been experiencing this problem (for a week) with messages stuck in MDT RTW in status "Delivering", for first 20-30 messages and then eventually in "System Error" for the other ones. We keep re-starting XI (both stacks) to push the messages to IS, but need to find a real solution.
SAP support has not been prompt to help, although we opened status high customer message.
This is inbound transaction coming via RNIF 2.0 XI 3.0, not a new system; it has been running last two years.
Will be grateful for any suggestions on how to fix this problem.
I presume it is tunning issue, but where to start?
Margaret

Similar Messages

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac get message that phone is in recovery mode and that

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease help

Hello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H.

My Iphone goes into "connect to Itunes" mode, I connect to Itunes and restore, then with 24 hours I get the same message again, any ideas ?

My phone goes into "connect to Itunes" mode and locks up, I connect to Itunes and do a restore and then within 24 hours I get the same message again and the phone locks up. any ideas ?

You're welcome.
A hardware problem doesn't mean complete failure.
With a computer, a hard drive can have a partial or complete failure.
If it wasn't a hardware problem, it would be resolved after restoring the iPhone as a new iPhone or not from the backup. If not, every iPhone running 5.1.1 would have the same problem.

Getting error - A message going to a one-way send port is being suspended.

Hi,
I am getting the following error message (in the BizTalk administration console), on my Production servers, upon testing one of my BizTalk Interfaces, deployed on the same :-
A message going to a one-way send port is being suspended. Reason: The send port configuration corresponding to the message was not found.
This usually happens when a send port was deleted while it still had some active messages.
The same application is working fine on the Test environment.
Please note
à This is a clustered BizTalk environment.
I have checked, both the Host Instances are running properly, on the same environment.
I am also able to connect to the SQL database (Msgbox) server, that the BizTalk servers are pointing to.
Can you kindly guide on the same.

Hi Shalini,
This very well could be an SSO issue. Are you getting any SSO errors in the event log? Intermittent SSO issues could cause the
inconsistent results you are seeing.
Of course, as the port configuration is stored in the SSODB, if access to this database is restricted port configuration cannot be accessed
and so the message could not be delivered.
Refer: http://blog.sabratech.co.uk/2007/02/send-port-configuration-corresponding.html
Also, try changing the send handler to run under different host instance.
Rachit
Please mark as answer or vote as helpful if my reply does

Droid Bionic text messages going to wrong people

I have had my Droid Bionic for several months now. It is not rooted and I don't download tons of apps on my phone. I don't use netflix to watch movies or download music. The apps I have are mainly to help me with work. So I'm not app happy just downloading things non stop. This is why I'm confused and irritated. My Bionic has started sending text messages to the wrong people! I had this issue with my Droid X which is why I switched to the Bionic, hoping that after all these years of making smart phones motorola, google and verizon would put a phone out there that actually works like it's supposed to. How much practice do these phone companies need to get their OS right? I don't mind paying a lot of money for something that will make my life a little easier but I get very irritated paying a lot of money for something that doesn't work the way it's supposed to...and at the most inappropriate times. The Bionic has gone from helping to adding to my daily hassles. Is anyone else having issues with text messages going to the wrong people on their Bionics? Have you found a way to fix it? I'm also getting error messages that just started about a week ago...com.motorola.main.service has stopped and then a option to forceclose. The tech support person at Verizon sounded like he had never seen a smart phone before and gave me the Verizon standard technical reply..."do a factory reset". I should not have to reset anything on a NEW Phone! Why don't you fix these problems Google, Motorola and Verizon and in a timely manner?! I know for a fact if I didn't pay for my phone as promised or pay my bill as promised I would suffer the consequences immediately! You cell phone companies are all about getting your money and leaving us customers out here hanging and irritated. If you think my feelings are misguided then feel free to prove me wrong. FIX THESE ISSUES AND FIX THEM IN A TIMELY MANNER! BETTER YET, PUT OUT A PRODUCT THAT WORKS AS PROMISED IN YOUR ADS! TRAIN YOUR TECHS TO ACTUALLY RESOLVE ISSUES INSTEAD OF RECITING THEIR FAVORITE MOTO "Do a factory reset"! When you do these 3 things I will not feel like someone who has been lied to, robbed, and irritated! I am usually a very positive person but after dealing with issues with 2 expensive phones I'm a little upset. Can anyone help me fix my phone?

Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.

Text messages going to wrong people

I am new to this forum and I think I posted under the wrong forum for my problem. Please follow the link to my post. I really would appreciate some help.
http://community.vzw.com/t5/DROID-DROID-2-by-Motorola/Droid-Bionic-text-messages-going-to-wrong-people/td-p/733318

I have been experiencing this issue for the last few weeks and it is extremely annoying. I've called Verizon 7 times and have gotten nothing but the run around. What's even more annoying is hearing them say there will be a software coming out to correct the problem but they don't know when. I'm very disappointed in Verizon. I've been with them for many years. They were my first and only carrier. I will definitely not be taking this lying down. I'm going to get a resolution, and if that means leaving Verizon, then so be it. And if anyone from Verizon is reading this, PLEASE DO NOT offer up another apology. I don't want another apology, I want this issue to be corrected, NOW!!

I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

actually I found the solution :
http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
it's in french, but the images and google translate will be enough
hope that helps for the others having the same kinda problem

My external hard drive goes in to constant access mode and really slows down my computer

I'm using an external hard drive for time machine. After working for an hour or so the drive goes into a constant access mode and realy slows down my IMac. I look at activity monitor and everything looks good, no high CPU usage or memory issues. The only fix is to use the power button to shut down my IMac. After restart it works fine for a while.
If I turn off time machine the problem seems to not happen. I tried disk utility on the external hard drive and it says the dirve is fine. I change out external drives and the problem still occures. Any thoughts?

I didn't realize my profile stated otherwise.
Please check near the bottom of your original post above to see OS X (10.7.2). You might want to update that to avoid confusion and save some time in the future.
OK, please take a deep breath.
Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme....likely because it is not reliable. You might want to review this Apple Support document to confirm:
http://support.apple.com/kb/HT2038
So, we are not going to be able to provide you with much assistance on that issue.
Some users seem to be able to make this work....some have some problems....and some (like me) who have tried this have nothing but problems.
Sorry, I can't help on this one, but maybe another user who has had better luck will post to provide his secrets.
The iTunes and iPhoto libraries and files are my only copies now. I moved everything from my Macbook to the external then deleted the originals.
Not sure if you have thought about this.
If you deleted the "originals", then your only copy of your data is on one hard drive. You have no backups if the drive has a problem.
A minimum backup plan would be to have a copy of important data on two different drives. When....not if...one drive fails, you have the data on the "other" drive.
You have no "other" drive according to the information that you have provided.
Further.....Time Machine backs up the changes on your Mac. At some point....you cannot know when.....Time Machine will pick up the change on your Mac and delete the iTunes and iPhoto data from your Time Machine backups.
The files might stay there a few months, or even longer. But, I have seen instances where the files were deleted within a week or two.
So my advice would be to only delete data from your Mac that you can afford to lose.

My 3050 J610 printer goes into standby or sleep mode and then I cannot print docs to it wirelessly

Everytime I do not print something for a few hours, my printer goes into standby or sleep mode. When it does this, it cannot be used to print from my laptop or android to it. Is there a way to set this up so that it doesn't "go to sleep" and it is always available to me to print with. I like the printer, but it seems kind of off that you cannot print on it wirelessly and it is considered a WIRELESS printer. That's the only reason I bought it and now I can't even use it without walking downstairs and turning the printer back on again. If I wanted to do that every time I would just print from my main computer!
Thanks,
Ashley
This question was solved.
View Solution.

Ok, I know this thread is a little old, but it would not allow me to start a new one, since I am new. I am having the same issues with my 3050 J610 as everyone else. It makes you think there is a wireless connection problem, but that is not the case. The printer goes into a standby mode and there is no way to bring it out of it, unless you cycle the printer. The panel buttons will still work, you just lose the ability to print wirelessly.
I have had my 3050 J610 in two different rooms, master bedroom and basement office. Both areas work well when it is connected and awake. After a while of inactivity, it goes into standby mode and cannot print wirelessly. Here are steps I have taken so far:
When the printer goes into standby and will not print wirelessly, I have check to make sure there is still a connection between the router and the printer - There is
I have set a static Id for the printer at .210
Cycling the printer brings the connection back instantly.
The front panel buttons work just fine when it does not have connectivity
In the basement, the machine has excellent signal and connection.
I have checked the recommendations in this thread, and like others, there are no options under the advanced tab of the maintenance page. The problem is a standby or sleep issue. When this arises, it has connection to the router, but the wireless computer does not have connection to the machine. I know when it was in the bedroom, the light would blink 3 or 4 times now and then throughout the night. We need a way to turn off the standby, or bring the machine out of standby mode. It is not an issue of the router, channel, interference, or software. It is the sole issue of standby or sleep modes. I have been pulling my hair out for almost two years over this issue. I swore I would not buy another HP product after the problems I had with a printer and laptop. But I thought I would give HP another chance.

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all.What now?

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all. What now?

Fallout75, good catch on the eXo plugin. To remove it, in the Finder click "Go" on the menu bar and pull down to "Go to Folder" and then type ~/Library/iTunes/iTunes Plug-ins
When that Finder window opens, you should see an "eXo" subdirectory. Just delete that "eXo" folder and iTunes should start without the error.

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Messages stuck in TO BE DELIVERED status

Hi !
Suddenly, whenever a message has to use the File Adapter, no mather which communication channel is to be used, the message is stuck with the "TO BE DELIVERED" status.
These messages, all have SUCCESSFUL status in the SXMB_MONI. The problem is in adapter engine. ALL have NO errors in their Audit Log. Because the problem is in adapter engine/framework, obviously queues at SMQR/SMQ1/SMQ2 are emtpy. ALL have QoS = EO (no eoio queue is used, NO predecessor messages are stuck with system error).
This occurs no mather which adapter is the sender (RFC, File, etc.)
The audit log is:
2008-04-10 16:59:34
Success
Message successfully received by messaging system. Profile: XI URL: http://xxxxxxx:yyyyy/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-04-10 16:59:34
Success
Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-04-10 16:59:34
Success
Message successfully put into the queue.
If we try to resend the message using the "resend" button in RWB, the message keeps in the TBDL state and the only difference is a new "success" entry in the audit log saying that:}
"Success | Admin action: Trying to redeliver message".
We already refreshed the cache and restarted the Java stack.
Any clues?
Thanks !
Regards,
Matias.

Hi,
Statuses such as HOLDING or FAILED usually happen only for delivery semantics EOIO (exactly once in order) or BE (best effort means Asynchronous). TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue. This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
The MS returns HTTP 200 to the Integration Server only if this was executed successfully. In this example scenario, status TO_BE_DELIVERED should not appear since we assume that the IS has called the servlet successfully.
The status is updated from TO_BE_DELIVERED to DELIVERING when the message has popped out of the receive queue and the event handler lookup was successful, so there is a small gap where TO_BE_DELIVERED could remain in the message monitor, although it was delivered from IS successfully.
Regards,
Srini

Messages are in to be delivered status

Many messages are in to be delivered status in the adapter engine message monitoring
Can any body help regarding this

Hi Sandeep,
     Would you explain a little bit more your issue?
     i.e:
     This kind of messages are Sync Messages?
     Do you have more than one message in Interfaces Determination object?
     If multiple inbound interfaces are assigned by the interface determination, the messages are forwarded according to the quality of service Exactly Once in Order (EOIO) at runtime. This means that the order in which the inbound interfaces are entered in the interface determination determines the order in which the messages are received.
     You can change this default by deselecting the Maintain Order at Runtime checkbox. In this case, the quality of service Exactly Once (EO) is used to forward the message to the inbound interfaces.
Regards,
Luis Diego

Messages are in to be delivered state and slows down the message processing

Hello,
Messages are in to be delivered state and slows down the message processing.
this happenens in case of DB2 on some machine where the issue about high load on DB2 is caused by standard programming in SAP XI that executes a statement, where it uses the condition 'where 1<0' prio to the original SQL statement configured in the channel configuration,
Can you please help me out in solving this issue?
Thanks,
Soorya

Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

Perhaps something in this support article will help:
http://support.apple.com/kb/TS2755
Regards.

Messages going in "To Be Delivered" Mode in RWB

Similar Messages

Maybe you are looking for