Messages going to the wrong Integration Server

Hello All,
   We saw a problem with few messages on the production XI server for a brief period of time. the following is the scenario.
1) An ORDERS05 IDoc comes out of the ECC, gets correlated and was sent out to conversion Agent for translation and was sent out to the vendor.
2) We get the response 997 from the vendor to the file port. This message has been picked up by the file adapter, got translated and was sent out to the XI Integration engine on the development box.
I could see this message on the RWB under the Adapter Engine component. This message did not reach the Integration engine on the Production box. A close look at the message details tells me that the message was sent to the Integration engine on the Development box.  This happened to a few messages with in a minute time frame. All the messages before and after the minute time frame made just fine to the XI integration server.
We checked the SLD and found no reference of Production box pointing to the development XI IS.
I appreciate any pointers in this regard.
Thanks.

Hi Balu,
this could happen if your XI DEV system has a file adapter containing the same source directory where your response from vendor is coming for production.....this file adapter will be active....so it is pickng your response and triggering it to XI DEV before XI prod can pick it up.........it is also possibel that your XI PRD system file adapter is currently deactive or has some error in it now.......So just check the file adapters of XI DEV and XI PRD for your this scenario......
Thanks,
Rajeev Gupta

Similar Messages

  • Trouble with text messages going to the wrong person

    I have four family members all on the same Apple ID account.  Text messages are going to the wrong people when sent among family members.  Text A going to B ends going to C.  Not sure what the problem is.  Any help would be greatly appreciated.

    I have been experiencing this issue for the last few weeks and it is extremely annoying.  I've called Verizon 7 times and have gotten nothing but the run around.  What's even more annoying is hearing them say there will be a software coming out to correct the problem but they don't know when.  I'm very disappointed in Verizon.  I've been with them for many years.  They were my first and only carrier.  I will definitely not be taking this lying down.  I'm going to get a resolution, and if that means leaving Verizon, then so be it.  And if anyone from Verizon is reading this, PLEASE DO NOT offer up another apology.  I don't want another apology, I want this issue to be corrected, NOW!!

  • BPM Acknowledgement message reading the wrong integration server name

    HI
    I have a scenario where I have BPM which sends data to A MS SQL Server database and waits for a TRANSPORT Acknowledgement. The Mesage going to the Database is processed successfully but the acknowledgement messasge fails giving the following error when viewed in the message monitor.
    IS_DETAILS_GET_ERROR
    no_integration_server_found: Unable to find Integration Server is.XX.XXXXXXXX
    Error while reading access data (URL, user, password) of Integration Server is.XX.XXXXXXXX
    Actually the string "is.XX.XXXXXXXX" contains the name of the integration server.
    Now my problem is the actual  value contained in the above string is the name   of the integration server . But this name is not correct ,  I mean it is not what the actual name should be. We are not able to find out from where this incorrect name is being picked up. Can anyone tell from where the actaul name and url  of the integration server is read. Is it stored in different locations for inbound messages and acknowledgement msgs. Will refreshing any of the caches will help.
    Please suggest.
    regards
    Nilesh Taunk.

    Hi Nilesh,
    your problem is very strange because your BPM is sending data correctly to SQL DB .....your db is processed.....but the ack msg when coming in bpm gives IS_DETAILS_GET_ERROR.
    i think just see all the objects in IR and ID are activated.....after that by SXI_CACHE transaction do a cache refresh.........see the return code of BPM is zero or not......the retun code of BPM shuld be zero.......
    again run your this scenario.......now please tell what happens......
    Thanks,
    Rajeev Gupta

  • Bonjour + Fast User switching = messages going to the wrong (inactive) user

    We use iChat for Bonjour in our office– fast file transfers etc.
    If a user is one of 2 or more logged in on a machine– through the use of fast user switching, we've noticed that incoming messages (initiated by another user on the network) will often go to the switched user (i.e. the inactive user) not the user we're currently logged in as.
    We've been able to repeat the issue.
    1. Log in as user 1, fast user switch to user 2 (leaving user 1 logged in but inactive)
    2. Go to new machine, log in as user 3
    3. Send message from user 3 to user 2
    4. Look at user 2 screen. No messages
    5. Send message from user 2 to user 3. User 3 will receive message, and will be able to send message successfully back to user 2.
    6. Log out use 2
    7. Log in as user 1
    8. Notice all the messages that were going to the 'inactive' user profile.
    Has anyone else seen this type of behavior?

    HI MAtthew,
    Welcome to the Apple Discussion Pages.
    I have not seen this (I only have one Mac).
    However there is an item in IChat Preferences > General section that can set the staus of the Users account to Offline or Away when using Fast User Switching.
    What is yur set to and does it make any difference when changing it ?
    Away in normal circumstance menas someone can still Invite you to chats (or Text you)
    Ralph

  • Test messages going to the wrong contact

    Every now and then, I will send a text message to a friend, and somehow, the message and the following conversation, seems to be copied to my wifes phone.
    An interesting scenario!! Also makes me wander who else might be aware of my sms conversations!!!
    I cant put my finger on when the issue first started, it does seem to have started fairly recenlty though. At first i thought i must have done something wrong...but now i am sure there is some sort of anomaly here.
    I have done an iphone reset (ie..hold power and home buttons down for 10 seconds). That did not seem to resolve.
    My friends is using an iphone 3GS (not sure of iOS version) and my wife and i are both on iphone 4 with 5.1.1. My wife's and my phone are managed by the same itunes account / pc (not sure if there is some sort of confusion between phs somehow?)
    Any ideas on how to address this?
    Thanks

    Your Messages app uses 2 different paths to reach recipient. Either through Apple server (iMessage) or Cell carrier (SMS).
    Here a link to an artikel which gives you an idea how to share Apple ID.
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • Text messages going to the wrong people...

    I just got my new phone about 3-4 weeks ago.  Atleast once a day it seems, I am on a thread to send a text message to one person and it ends up going to someone else.  The person it goes to is someone I've previously been texting but days before.  So I haven't even been on that thread for days! Does anyone else have this problem? 

    I have been experiencing this issue for the last few weeks and it is extremely annoying.  I've called Verizon 7 times and have gotten nothing but the run around.  What's even more annoying is hearing them say there will be a software coming out to correct the problem but they don't know when.  I'm very disappointed in Verizon.  I've been with them for many years.  They were my first and only carrier.  I will definitely not be taking this lying down.  I'm going to get a resolution, and if that means leaving Verizon, then so be it.  And if anyone from Verizon is reading this, PLEASE DO NOT offer up another apology.  I don't want another apology, I want this issue to be corrected, NOW!!

  • Text messages going to the wrong phone.

    My son, wife and I each have an iPhone 4.  My son and I each have aan iPad2.
    Recently, some text conversations between me and third parties showed up not only on my iPhone but also on my son's iPhone and iPad.
    I attempted to solve the problem by turning off iMessage and then by creating a new apple ID for my iPhone and my iPad.
    Messages from thrid parties sent to me now sometimes turn up on my son's iPhone (and, I presume, his iPad- he's overseas with his iPad and without his iPhone, and our communication has been spotty, but he has confirmed that he's recieving on his iPad at least some of the texts sent to me).  Now, when the texts sent to me by third parties show up on his iPhone, they do not show up on my iPhone.
    This is too weird, and it's really difficult to communicate with others when I can't tell if I'm getting all of the messages third paries are sending me.
    How do I solve this so his iPhone and iPad don't get messages that have been texted to me, and so that my iPhone does get the texts others send to me?

    You have set up iMessage with the same e-mail address on multiple devices.
    Don't do that.

  • Messages are going to wrong Integration server

    Hi,
    In out SLD we have many servers like PD1(development) , PQ1, PQ2 etc.. somedays back basis team want to install some patch . so we moved to standbox for someday.. Pleaes note that we did client copy of PD1.. so all interface and we developed will point to PD1. now we have strange issue like when triggering the msg it getting appear in sandbox issue.. we chekced the ADM it was pointing the PD1 server. in the business systems too assigned to the PD1 integration server.. But how come the sandbox IS receiving the msg.. when we changed the related integration server to Sandbox server.. still the interface is working..  how come it is possible??
    Regards
    Balaji

    Yes!!  Web AS abap Systems.
    I checked the SXMB_ADM , if pointing the PD1 server..
    What the connection i should check in SM59.. apart from that any other things i should check??

  • HT1926 I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contact

    I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
    My internet works fine and I have tried back dozens of times with same result.

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • Change the Releated Integration Server for all Business Systems

    Hello,
    follow Scenario:
    We export the SLD entries from a Development System in a file.
    Now we want to import the Entries in our Prod.-System, and we
    have to assign (or change) to other Related Integration Server.
    e.g. the esported Business System has in Development the
    Related Integration Server D12, but in the Productive System we
    need P12.
    Is there a other possibility as  to change first things first.
    Thanks for your help.

    Hi Stephan,
    I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
    Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

  • I am unable to verify my apple ID. The I get the message I entered the wrong password. The password works online to get on ICloud

    I  am unable to verify my apple ID. The I get the message I entered the wrong password. The password works online to get on ICloud

    Welcome to the Apple Community.
    You might try the following steps:
    Restart the device by holding down the on/off button until the power down slider appears.
    Try entering your password in another location (i.e. when you are using a different wifi network)
    Reset all settings (settings > general > reset), this resets some of your settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It does not remove any of your data.
    If this doesn’t help your best option may be to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

  • Can't uninstall Premier Pro.  I keep getting messages to quit the Adobe QT32 Server and the dynamiclink manager.  I have no idea how to do these tasks?

    Can't uninstall Premier Pro.  I keep getting messages to quit the Adobe QT32 Server and the dynamiclink manager.  I have no idea how to do these tasks?

    You can kill these 2 task by opening the Windows Task manager (CTRL+ALT+SUPPR)
    Then find the processes named :
    Adobe QT32 Server
    Adobe Dynamic Link Manager
    Kill theses 2 tasks (right click then END OF TASK)
    If you got many of theses tasks, kill each.
    Then uninstall Premiere. It should be OK
    good luck
    noar

  • Server 2008 DHCP is handing out the wrong DNS server.

    We have two new 2008 DC that handles, DNS, DHCP and WINS. Our DHCP scopes have been migrated to these servers. We are seeing some random issues where clients are using the new dhcp server but the old dns server information is listed for the some systems. We discover this by using network monitor on the old DC, DNS, DHCP server.  Once the client performs a ipconfig /renew, the problem is corrected. Any ideas?

    Hi BrianAuH20,
    Thank you for posting here.
    Based on your description, I understand that your Windows 2008 DHCP server hands out the wrong DNS server address.
    To troubleshoot this issue, please perform the follow steps to see whether the clients retrieve the right DNS server address.
    1.     Temporarily make the old DC, DNS, DHCP server offline.
    2.     Check the new 2008 DHCP server setting.
                          i.        In the DHCP console tree, under Scope [172.16.0.0] SS Scope, right-click Scope Options, and then click Configure Options.
                         ii.        On the Advanced tab, verify that Default User Class is selected next to User class.
                        iii.        Select the 006 DNS Servers check box, in IP Address, under Data entry, type DNS Server IP address, and then click Add.
                        iv.        Select the 015 DNS Domain Name check box, in String value, under Data entry, type your domain's FQDN name, and then click OK.
    3.     Restart the DHCP service.
    For more information, you may refer to:
    http://technet.microsoft.com/en-us/library/ee404786(WS.10).aspx
    Hope this helps.
    Sincerely,
    Wilson Jia
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Wrong Integration Server Data retrivied from Adapter

    For unclear reasons the wrong URL to connect to Integration Server was retrieved by Adapter Framework.
    This happened only once, and in this situation the xml message of a productive interface were sent to IS of an
    other system (!).
    As I can see in the default trace, during the call from AF
    CPA cache service to SLD, the wrong host was retrieved.
    In other circumstances, we have found that sometimes the IS hostname is filled with blank, causing the AF to not dispatch successfully the messages to IS. But in this case, thanks to the patch 14 of XI AF, the message are re-sent after the next polling sequence (15 min.).
    I kindly need an help to discover which is the root cause of this kind of problem.
    I red note 764176 about finding inconsistencies on sld, but I have some doubts on the correct implementation in my case. In the note it's discussed about the same domain written two times (for example one in fully-qualified host name and one with a short host name). In our productive SLD there are three domain that have the same name for the technical system point of view, but three definition as CIM data, since there are originally three XI instance on the same host. So, I don't know if we are in the same condition as reported in the note.
    Does anyone have encountered a similar situation? Any workaround? For example, I view in the default traces that during the SLD Access performed by CPA service, there is no defualt value for Integration Server URL, but for default client yes (100). Is there a mode to force adapter framework to set the IS Url without asking it to sld, since I.S. url is always the same?
    Thanks
    Danilo

    Hi,
    The connection to the SLD is established by creating an RFC destination and The server program is called with the HTTP address as a parameter that is maintained with transaction SLDAPICUST.
    Hope this link will be useful.
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/8512417301ee6fe10000000a1550b0/frameset.htm
    and 25th page of config guide.
    https://websmp101.sap-ag.de/nw04installation
    Regards,
    Madhu

  • How to change the ROLE: Integration server in business system in SLD

    Hi,
    I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
    In SLD, business system, 'integration' tab there is button "Associate with XI'.
    I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
    When I press the button "Associate with XI" and Save nothing happened.
    How do i change my integration server.
    Please help.
    Regards,
    Rehan

    Hi Gaurav,
    I have checked the teachnical system  and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
    I realised that both the business systems has been defined with role: integration server.
    IN one business system i can see that there is "associate with XI" button.
    But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
    Can you please let me know the procedure to chnage the technical system with respect to integration engine???
    PLease help as our project is held up due to this.
    regards,
    Rehan

Maybe you are looking for