Messages in event log about processor speed limited by system firmware
On my new G50-80 I get the following event log messages: "The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report." and this repeats for all 4 processors, on every startup.What does this mean and how to fix? The BIOS is factory original (version BOCN73WW)I have not tweaked speedstep and so on (yet), the machine is on AC power.and I don't know what's DOS, and is it much worse than DDOS. Thanks,-- dd
hi dd,
Is this item your laptop?
If yes, when the machine is plugged-in and running on High Performance power plan, can you try to open a few graphics intensive applications and observe the CPU frequency if it reaches 2.4Ghz or goes into to 3Ghz (turbo boost).
If you don't have graphics intensive apps, try to:
1. Download and install Heavyload and run a stress test on the CPU.
2. Run Coretemp and observe the frequency and the temperature on the cores #0,1,2,3
It'll also help if you can post a screenshot of the results. As for the disk percentage being high, it's likely that there's an app running in the background that's constantly writing to the drive (i.e. Antivirus software running a scan in the background ro a torrent app downloading in the background).
Similar Messages
-
Speed of processor is being limited by system firmware after BIOS update
Hello,
I have updated the BIOS of my G510 to the latest version, which is 3.09. But after this update, I have noticed "The speed of processor is being limited by system firmware" entries at the Windows System event log. They are like that:
"The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 5 seconds since the last report."
I'm getting this message for all the cores, from 0 to 3.
Why is this happening? And what can I do, should I downgrade the BIOS to the previous version?
ThanksHello pka4916,
You’re having a problem with the speed of your processor.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If the problem is still not fixed Try to roll back you BIOS to a version that was working correctly.
Here is a link that will walk you through the steps.
Let me know how everything goes.
Have a good day. -
How to read system memory size, processor speed of a system
Hi all,
How to read system memory size, processor speed of a system and how to read how much of it are in use in a running system. (using java)
any help would be great.
-thanksHow to read system memory size, processor speed of a
system and how to read how much of it are in use in a
running system. (using java)Using Java: not at all. You'll need JNI. -
Raid performance deteriorates, looses drive, but no messages in event log
We have a PATA XServer Raid running, which was fine until a few weeks ago. Suddenly performance tanked, writing a 70 MB file via a 100 Mbps network would take an hour.
The Raid volume, a 6 drive 250 GB raid with one hotspare, had 100 GB left.
First we thought it was the network, there was a loose DHCP server, but nothing was available that could really explain the performance deterioration. The only thing that was noticed was that with Helios Lan test the first write to the raid would take more time as the subsequent writes. So we decided to upgrade the firmware and do a volume test, with diskutility. That gave a interleaf problem.
After upgrading the network (which was planned anyway) to 1 GBps, we rebooted the Xserve and the Raid. Now, the 6th drive had an orange status in Raid Admin, a warning, saying it was part of an Unknown Array. The 7th drive, the hot-swap, was now part of the Raid.
The strange thing is that in the event log there are no messages what so ever about a failed drive, nor any other messages relating to this. All I get is Coprocessor offline/Online, Raid Controller Restarted and Riad Controller 1 Fibre LIP, and Firmwareupdate
I also noticed that the time was off to local time, so I synchronized both to time.euro.apple.com.
Shouldn't we be getting messages something is very wrong in the event log?
XServe G5 Xserve Raid Mac OS X (10.3.9)We updated the firmware to 1.5.1. After that, the network switch was replaced by a 1Gbps switch, and the XServe and the XServe raid were rebooted. After that one of the people discovered that disk 6 had an orange led burning.
XServe G5, XServe Raid Mac OS X Server (10.3.9) Raid Firmware 1.5.1 -
SRUDB.dat Event Log - about 117 per hour!
After getting my first Windows 8 Blue Screen (I made it one year and one month from the purchase of a new Lenovo Laptop) I checked the event log. I am getting approximately 2 of these errors EVERY MINUTE!
I looked up what was running under this process id and these are the services:
svchost.exe 1724 BFE, DPS, MpsSvc
Base Filtering Engine, Diagnostic Policy Service, Windows Firewall
Makes me think this is a network driver issue, but my wireless and cabled network both perform well.
svchost (1724) SRUJet: The database page read from the file "C:\WINDOWS\system32\SRU\SRUDB.dat" at offset 7938048 (0x0000000000792000) (database page 1937 (0x791)) for 4096 (0x00001000) bytes failed verification due to a page checksum mismatch.
The stored checksum was [a042abbbf0884b06] and the computed checksum was [00000791fd3b01cb]. The read operation will fail with error -1018 (0xfffffc06). If this condition persists then please restore the database from a previous backup. This
problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem.
Ran checkdisk in offline mode "chkdsk /f
/r" with no bad sectors reported. Also ran system file checker "sfc /scannow "
and Deployment Image Servicing and Management "DISM.exe /Online /Cleanup-Image /RestoreHealth " successfully.
Updated Anti-Virus (Avast Free) and ran boot time scan which shows 1 CAB file as corrupted.
C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp>dir
Volume in drive C is Windows8_OS
Volume Serial Number is 706C-5AB7
Directory of C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp
03/11/2015 11:27 PM 127,159,032 mpam-8ca7e919.exe
03/23/2015 08:23 PM 22,913,024 mpam-abc6940c.exe
03/23/2015 08:25 PM 8,642 MpCmdRun.log
3 File(s) 150,080,698 bytes
2 Dir(s) 857,925,300,224 bytes free
Any idea how to repair this file assuming that is the issue?
Otherwise, how to stop the twice a minute event logs?svchost (1820) SRUJet: The database page read from the file "C:\WINDOWS\system32\SRU\SRUDB.dat" at offset 7938048 (0x0000000000792000) (database page 1937 (0x791)) for 4096 (0x00001000) bytes failed verification due to a page checksum mismatch.
The stored checksum was [a042abbbf0884b06] and the computed checksum was [00000791fd3b01cb]. The read operation will fail with error -1018 (0xfffffc06). If this condition persists then please restore the database from a previous backup. This
problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem.
System
Provider
Name]
ESENT
EventID
474
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2015-04-14T23:39:00.000000000Z
EventRecordID
229398
Channel
Application
Computer
JMOORE-Z710
Security
EventData
svchost
1820
SRUJet:
C:\WINDOWS\system32\SRU\SRUDB.dat
7938048
(0x0000000000792000)
4096
(0x00001000)
-1018
(0xfffffc06)
[a042abbbf0884b06]
[00000791fd3b01cb]
1937
(0x791) -
BT NetProtect Plus Error message in event log - mf...
Hi,
Anyonwe know why I am getting a warning in the system event log as follows
"Process **\MCSHIELD.EXE pid (2588) contains signed but untrusted code, but was allowed to perform a privileged operation with a McAfee driver."
Source: mfehidk
Event Id: 516
I am also getting the following error
"Unable to start a DCOM Server:{3A65891C-3794-43E5-89C8-20CCD19902CE}. The error: "740"
Happened while starting this command:
"C:\Program Files (x86)\McAfee\Supportability\MVT\MvtApp.exe" -Embedding"
Source: DistributedCOM
Event ID: 10000
Thanks
MickHi,
You may check this:
XL Reporter Server Error Log - Please Help
Thanks,
Gordon -
Question about processor speed
Ok. I used to have an iBook G4 1.2 Ghz. I am considering getting one off of ebay with a 1.07 Ghz processor...if I had 768 RAM last time and had it with the one i am considering buying, would there big a noticeable difference in speed or performance?
Obviously there will be a difference. I'm only basing my judgement on the fact that I own a 1.33Ghz iBook and having used a 1.42Ghz iBook, the only way I'd probably notice any real speed difference was if I ran them side by side. If you're running with 768Mb of RAM, I think the computer will (in your mind) run [virtually] identically.
-
Problems with using System.Diagnostics.EventLog to retrieve event log messages
Hi
In my app I am retrieving error and critical events from application and system log - but for some reason what it is returning doesn't tally with what I see in event viewer
For example:-
1) Source is SideBySide and shows in event viewer with Event ID of 33 - but in my app it is returning an event ID of 3238068257 - all other details such as message are correct - other event sources show fine
2) A lot of the system event log messages are showing wrong error message - in event log it shows correctly but in my app it is retrieving messages like this "The description for Event ID '41' in Source 'Microsoft-Windows-Kernel-Power' cannot be
found. The local computer may not have the necessary registry information or message DLL files to display message, or you may not have permission to access them" - I am running the app with admin rights?, so not sure why not showing same message as it
shows in event viewer i.e "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Darren RosePrivate Sub btnCheckEventLog_Click(sender As Object, e As EventArgs) Handles btnCheckEventLogs.Click
' get event logs
' APPLICATION LOG
' variables for adding to the listview application log
Dim ListEventlogApp As ListViewItem
Dim arrayEventlogApp(5) As String
' Clear existing items from list
lvwEventLogApp.Clear()
' Create columns and set width
lvwEventLogApp.Columns.Add("Date/Time", 120)
lvwEventLogApp.Columns.Add("Type", 50)
lvwEventLogApp.Columns.Add("Source", 150)
lvwEventLogApp.Columns.Add("ID", 100)
lvwEventLogApp.Columns.Add("Message", 1000)
' get event log (application) error entries
Dim eventLogAppError As New System.Diagnostics.EventLog("Application")
Dim eventCntr1 As Integer = 1
Dim numberofeventstoshow1 As Integer = 1
For i As Integer = eventLogAppError.Entries.Count - 1 To 0 Step -1
Dim eventLogAppErrorEntry As EventLogEntry = eventLogAppError.Entries(i)
If eventLogAppErrorEntry.EntryType.ToString = ("Error") Then
arrayEventlogApp(0) = (eventLogAppErrorEntry.TimeGenerated)
arrayEventlogApp(1) = (eventLogAppErrorEntry.EntryType.ToString)
arrayEventlogApp(2) = (eventLogAppErrorEntry.Source)
arrayEventlogApp(3) = (eventLogAppErrorEntry.InstanceId)
arrayEventlogApp(4) = (eventLogAppErrorEntry.Message)
ListEventlogApp = New ListViewItem(arrayEventlogApp)
lvwEventLogApp.Items.Add(ListEventlogApp)
eventCntr1 = eventCntr1 + 1
If numberofeventstoshow1 = 10 Then Exit For ' amend if you want to show more than 10 events
numberofeventstoshow1 = numberofeventstoshow1 + 1
End If
Next
' SYSTEM LOG
' variables for adding to the listview application log
Dim ListEventlogSys As ListViewItem
Dim arrayEventlogSys(5) As String
' Clear existing items from list
lvwEventLogSys.Clear()
' Create columns and set width
lvwEventLogSys.Columns.Add("Date/Time", 120)
lvwEventLogSys.Columns.Add("Type", 50)
lvwEventLogSys.Columns.Add("Source", 150)
lvwEventLogSys.Columns.Add("ID", 100)
lvwEventLogSys.Columns.Add("Message", 1000)
' get event log (system) critical entries
Dim eventLogSystemCritical As New System.Diagnostics.EventLog("System")
Dim eventCntr2 As Integer = 1
Dim numberofeventstoshow2 As Integer = 1
For i As Integer = eventLogSystemCritical.Entries.Count - 1 To 0 Step -1
Dim eventLogSysCriticalEntry As EventLogEntry = eventLogSystemCritical.Entries(i)
If eventLogSysCriticalEntry.EntryType.ToString = ("0") Then
arrayEventlogSys(0) = (eventLogSysCriticalEntry.TimeGenerated)
arrayEventlogSys(1) = ("Critical")
arrayEventlogSys(2) = (eventLogSysCriticalEntry.Source)
arrayEventlogSys(3) = (eventLogSysCriticalEntry.InstanceId)
arrayEventlogSys(4) = (eventLogSysCriticalEntry.Message)
ListEventlogSys = New ListViewItem(arrayEventlogSys)
lvwEventLogSys.Items.Add(ListEventlogSys)
eventCntr2 = eventCntr2 + 1
If numberofeventstoshow2 = 10 Then Exit For ' amend if you want to show more than 10 events
numberofeventstoshow2 = numberofeventstoshow2 + 1
End If
Next
' get event log (system) error entries
Dim eventLogSystemError As New System.Diagnostics.EventLog("System")
Dim eventCntr3 As Integer = 1
Dim numberofeventstoshow3 As Integer = 1
For i As Integer = eventLogSystemError.Entries.Count - 1 To 0 Step -1
Dim eventLogSysErrorEntry As EventLogEntry = eventLogSystemError.Entries(i)
If eventLogSysErrorEntry.EntryType.ToString = ("Error") Then
arrayEventlogSys(0) = (eventLogSysErrorEntry.TimeGenerated)
arrayEventlogSys(1) = (eventLogSysErrorEntry.EntryType.ToString)
arrayEventlogSys(2) = (eventLogSysErrorEntry.Source)
arrayEventlogSys(3) = (eventLogSysErrorEntry.InstanceId)
arrayEventlogSys(4) = (eventLogSysErrorEntry.Message)
ListEventlogSys = New ListViewItem(arrayEventlogSys)
lvwEventLogSys.Items.Add(ListEventlogSys)
eventCntr3 = eventCntr3 + 1
If numberofeventstoshow3 = 10 Then Exit For ' amend if you want to show more than 10 events
numberofeventstoshow3 = numberofeventstoshow3 + 1
End If
Next
End Sub
Darren Rose -
I didn't find any log in the event viewer about creating new VM.
Dears ,
I'd like to find a log in the event logs about creating new Virtual machine , please check with us.Hi Ramy,
Sorry for the mistake , I'm using 2012R2 and I have the event ID 13002 .
Now I realize you are using 2012 not R2 , so I found a 2012 host to verify that ... you are right .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Data Access Service is unable to log audit events to the security event log
Hi,
Scenario: SCOM 2012 R2 UR4. (Windows 2012 R2)
Today SCOM have generated 4 alerts Data Access Service is unable to log audit events to the security event log.
The service account for "System Center Data Access Service" service is "Local System".
The users at "Generate security audits" are: LOCAL SERVICE and NETWORK SERVICE.
The question is:
how to resolve this alert? (Where look for to obtain more information to resolve this problem)
Thanks in advance!Local system account is differet to local service account. Fo detail description of these accounts, pls. refer
LocalService Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684188(v=vs.85).aspx
LocalSystem Account
http://msdn.microsoft.com/en-us/library/windows/desktop/ms684190(v=vs.85).aspx
Generate security audits which is under Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment of Group policy, determines which accounts can be used by a process to add entries to the security log. This user right
is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. By default, only the LocalSystem account has the privilege to be used by processes to generate security audits.
For identified the SDK account
1) open services.msc
2) From the system Center Data Access Service, you can see the SDK logon on as account
Roger -
Hardware Overview:
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Serial Number (system): W8039BSWDB6
Hardware UUID: E7B19EBE-57F9-5EA6-B390-FC1B0ADEFCA9
OS X 10.6.8mellfrommountain brook wrote:
When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
There are many possible reasons for that.
Most likely a corrupted cookie or cache file for that site may be responsible.
On the Safari menu bar got to Safari -> Empty Cache
Then go to Safari -> Preferences and click on the 3rd symbol from right.
Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
Restart Safari and try again to log in on the site.
Lupunus -
Lots of Anyconnect Error Message in Windows Event Log
Hi Community.
We have lots of Anyconnect Error Messages in the Windows Event Log. Following two examples.
Can anyone tell me why these errors appears and how do I fix them ? I already installed the newest Anyconnect on my machine.
Thanks in advance and Kind Regards Patrick
Example 1
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97564</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::logProbeFailure File: .\NetEnvironment.cpp Line: 1432 Invoked Function: CHttpProbeAsync::SendProbe Return Code: -27066354 (0xFE63000E) Description: HTTP_PROBE_ASYNC_ERROR_CANNOT_CONNECT HTTP (host: 109.164.211.237)</Data>
</EventData>
Example 2
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97565</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::TestAccessToSG File: .\NetEnvironment.cpp Line: 1385 Invoked Function: CNetEnvironment::analyzeHttpResponse Return Code: -28966899 (0xFE46000D) Description: NETENVIRONMENT_ERROR_PROBE_INCOMPLETE:Network Probe could not contact target</Data>
</EventData>HI and welcome to Discussions,
in my personal opinion there is not much for you to worry about.
The 'Windows Tool for the elimination of malware' is nothing you miss as long as you have a decent Anti-Virus Software running.
The update for the IE 7 might be missing an installed IE 7, which can do by downloading it yourself from Microsofts webpage.
If you don't use the IE but something like Firefox or Opera or Safari, than don't bother with these update.
Stefan -
Homehub 3.0 Wireless Event Log messages
Hello,
Can anyone tell me what event log messages like the following mean?
3 consecutive beacons have not been transmitted
I'm getting these about once every 20 minutes. Smart Wireless is enabled.
A couple of days ago Wireless became unstable, devices connecting and reconnecting repeatedly. The Wireless light was randomly flashing on and off (Blue) every few seconds. I had to restart the homehub (which I didn't really want to do, as I was still within my first 10 days, with Infinity). But after the restart, the admin password had changed. I assumed it was reset to the original one, but that was also not recognised. I had to do a password override to get access.
Ever since then Wireless has been behaving itself but I'm still left with these strange event log messages - google comes up with nothing.
Any ideas?Hi BRunner and welcome
Although I've not had opportunity to obtain one of these hubs (BT are you listening), as I'm still on the hub 2, I'll try to help you out with this...
It looks like the hub is reporting that it can't transmit the wireless signal on the chosen channels, why, I'm not too sure
(this might be due to the design (how 'Smart Wifi' works), or dare I say it, the hub could be faulty!!!!!)
Firstly, download either inSSIDer2 (Windows) or istumbler (MAC) - take care when installing, uncheck any 'additional freebies' as they're not needed.
Either will show all the wireless SSIDs in your area. As I use inSSIDer2, I'll explain what to do using this one, I guess itsumbler would be similar (not a MAC man, yet!)
Disconnect from your own hub, run inSSIDer and monitor any SSIDs, I recently noticed that 2 of my neighbours (VM) routers appears to grab channel 1 upto channel 7!
This keeps changing and they keep fighting with each other. As this was affecting me, I've moved to channel 8. This can be manually set via the hub manager, but you'd probably need to switch off 'Smart Wifi'
Ideally, take a screenshot of the results BUT remove ANY wireless SSID's, it's the channels in use that's important.
-+-No longer a forum member-+- -
Questions about BT Home Hub 4A event log - WIFI c...
Hope someone can help please ?
I had BT inifinity installed 2 weeks ago with the HH 4 (type A) and everything has worked - connection found, no problem.
This week, my ipod touch was unable to join the network but the iphone 5, another ipod and a tablet could connect without a problem. The ipod touch managed to connect to another WIFI used at the property and my work wifi without a problem.
I thought it maybe the ipod touch as it was quite old but that doesn't make sense since it connects fine to other networks. I restored network settings and other options suggested by Apple but to no avail.
I have turned my attention to the Hub. My laptop (older than the ipod touch) gets the connection no problem along with the other devices. I went into the hub management page but I am not smart enough to decifer the event log so would like some help so I can fix this because I thought BT infinity was the better more reliable option?
The ipod touch Wifi IP address is 00:25:00:b7:35:f6.
On the event log, it shows STA before the address - but it shows STA before all the device IP addresses. Should I change this to DCHP ? or is this (Static ? alright)
The Lease on all the devices on the event log is set to 1440 min. (1 day) is that alright too, what does it mean ?
Do I have to keep renewing the lease ? How do I do that ? I read it can be set to 21 days ?
Going back to the IP address on the ipod it shows the Hostname as 00:25:00:B7:35:f6-2 this is different to the IP address with the -2. Could that be a cause of the unable to join network or is it because I attempted to recreate the network on the ipod so its the second version of that host name ?
Is there any setting I can change to fix this because I am concerned the same this will happen to the other devices and then the laptop....
What do I need to do to be able to get my ipod touch to connect to the BT network setting ?
I think its the hub 4A causing the 'block' on the ipod touch not the device and I think its maybe a matter of changing a setting - but then why was it all fine before when Infinity was first installed ?
Lastly my laptop (7 Years old) seems to be attached to the 5GHZ Wireless channel - is that alright ? The other more recent devices are on the 2.4ghz channel (except the ipod touch which isn't on any !!)
Is it alright to turn the hub on / off ? -I am resisting that because I don't want to make the situation worse.
Sorry but what does client disassociated mean and all the BLOCKS - do they relate to firewall ?
Please can you review the event log and my questions ?
Many thanks
angie 2601
The time frame is 3.55am 8/8/2013 - 7.16 am 8/8/2013
(Latest (7.16am) at the top
Message
07:16:39, 08AUG
(1224785.050000) Admin login successful by 192.168.1.64 on HTTP (1224766.610000) Admin login FAILED by 192.168.1.64 on HTTP (1224648.050000) New GUIsession from IP 192.168.1.64
(1224466.770000) Device disconnected: Hostname: Unknown-d8:dl:cb:ec:a6:fe
IP: 192.168.1.65 MAC: d8:d1:cb:ec:a6:fe
wlan1: STA d8:d1:cb:ec:a6:fe IEEE 802.11: Client disassociated
(1224362.750000) lease for IP 192.168.1.65 renewed by host Unknown d8:d1:cb:ec:a6:fe (MAC d8:d1:cb:ec:a6:fe).lease duration:1440 min (1224362.750000) Device connected: Hostname:Unknown-d8:d1:cb:ec:a6:feiP:
192.168.1.65 MAC:d8:dl:cb:ec:a6:fe lease time: 1440 min. link rate:90.0 Mbps
(1224362.690000) Lease requested
wlan1: STA d8:d1:cb:ec:a6:fe IEEE 802.11:Client associated
(1224241.150000) lease for IP 192.168.1.64 renewed by host FAMILY (MAC
00:13:02:de:6d:e6). Lease duration:1440 min
(1224241.150000) Device connected: Hostname: FAMii.Y IP:192.168.1.64 MAC:
00:13:02:de:6d:e6 Lease time: 1440 min. link rate: 54.0 Mbps
(1224241.090Cl00) Lease requested
wlan1TA 00:13:02:de:6d:e6 IEEE 802.11:Client associated
OUT: BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:34905->31.13.72.38:443 on ppp1)
(1223644.770000) Device disconnected: Hostname: Unknown-d8:dl:cb:ec:a6:fe
IP: 192.168.1.65 MAC: d8:d1:cb:ec:a6:fe
wlanl: STA d8:d1:cb:ec:a6:-fe IEEE 802.11:CHent diSassociated
(1223489.390000) Lease for IP 192.168.1.65 renewed by host Unknown d8:d1:cb:ec:a6:fe (MAC d8:d1:cb:ec:a6:fe).lease duration:1440 min (1223489.380000) Device connected:Hostname:Unknown-d8:dl:cb:ec:a6:fe IP:
192.168.1.65 MAC: d kd1:cb ec:-a6-:fe Lease time: 1440 min. Link rare: 90.0 Mbps
(1223489.330000) Lease requested
wlan1: STA d8:d1:cb:ec:a6:fe IEEE 802.11: Client associated wlan1TA d8:d1:cb:ec:a6:fe IEEE 802.11: Client disasSociated
wlan1TA d8:d1:cb:ec:a6:fe IEEE 802.11:Client associated
OUT;BLOCK [9] Packet i valid in connection (TCP
192.168.1.66:34375->31.13.72.38:443 on pppl)
l'N':BLOCK [16-} Remote administration {ICMP type 8 code 0
117.1.42.94->86.182.228.205 on ppp1)
IN: BLOCK [9] Packet invalid in connection (TCP
31.13.72.33:443->86.182.228.205:44156 on ppp1) IN: BLOCK [9] Packet invalid in connection (TCP
31.13.72.33:443->86.182.228.205:36615 on ppp1)
OUT: BLOCK [9] Packet invalid in connection (TCP
192.1-68.1.68:49476->173.252.103.16:443 OR ppp1)
BLOCKED 5 more packets (because of Packet invalid in connection) OUT: BLOCK [9] Packet invalid in connection (TCP
192.168.1.68:49443->95.100.195.205:443 on ppp1)
OUT:BLOCK {9] PaCket invalid in connection (TCP
192.168.1.68:49438->95.100.194.217:443 on ppp1)
IN:BLOCK [9] Packet invalid in connection (TCP
95.100.194.217:443->86.182.228.205:49444 on ppp1)
(1222111.810000) Lease for IP 192.168.1.68 renewed by host Unknown-
70:56:81:46:bf:d9 (MAC 70:56:81:46:bf:d9).Lease duration:1440 min
(1222111.810000) Device connected:Hostname:Unknown-70:56:81:46:bf:d9 IP:,
192.168.1.68 MAC:70:56:8:t:46:bf:d9lease time:1440 min. Link rate:52.0 Mbps
(1222111.750000) Lease requested .-
wlanO: STA 70:56:81:46:bf:d9 IEEE 802.11: Client associated • (1222093.690000) Device dlsconn: Hostname:Unknown-
00:25:00:b7:35:f6-2 IP: 192.168. MAC: 00:25:00:b7:35:f6 wlanoTA 00:25:00:b7:35:f6 IEEE 802.11:Client disassociated
OUT:BLOCK [9] Packet invalid in connection (TCP
192.168.1.66-:43272->31.13.72.33:443 on ppp1)
221969.130000) lease for IP 192.168.1.67 renewed by host Unknown-
00:25:00:b7:35:f6-2 (MAC 00:25:00:b7:35:f6). lease duration:1440 min
(1221969.130000} Devicconnected: Hostname·:Unknowwoo·:25:00:b7 35:f6-2
IP: 192.168.1.67 MAC: 00:25:00:b7:35:f6 Lease time: 1440 min. Unk rate: 54.0
Mbps
(1221969.070000) Lease requested
wlanO: STA 00:25:00:b7:35:f6 IEEE 802.11:Client associated
(1220365.290000) Device disconnected: Hostname:Unknown-
00:25:00:b7:35:f6-2 IP: 192.168.1.67 MAC: 00:25:00:b7:35:f6 wlanOTA 00:25:00:b7:35:f6 IEEE 802.11:Client disassociated
(1220348.230000) Lease for IP 192.168.1.67 renewed by host Unlmown-
00:25:00:b7:35:f6-2 (MAC 00:25:00:b7:35:f6).lease duration: 1440 min
(1220348.230000) Device connected: Hostname:Unknown-00:25:00:b7:35:f6-2
IP: 192.168.1.67 MAC: 00:25:00:b7:35:f6 Lease time: 1440 min. Unk rate: 54.0
Mbps
(1220348.170000) lease requested
wlanOTA 00:25:00:b7:35:f6 IEEE 802.11:Client associated
IN: BLOCK f16] Remote administration (TCP
123.151.42.61:12233->86.182.228.205:8080 on ppp1) OUT: BLOCK [9] Packet invalid in connection (TCP
:t92.Hi8.1.66:53813->31.13.72.33:443 on ppp1)
OUT:BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:43989->31.13.72.33:443 on ppp1)
IN: BLOCK [16] Remote administration (ICMP type 8 rode 0
2.7.251.109.227->86.182.228.205 on pppl)
(1216770.650000) Device disconnected:Hostname:Unknown-
00:25:00:b7:35:f6-2 IP: 192.168.1.67 MAC: 00:25:00:b7:35:f6
OUT:BLOCK [9j Packet invalid in connection (TCF
192.168.1.67:49180->74.125.136.109:993 on ppp1)
wlanOTA 00:25:00:b7:35:f6 IEEE 802.11:Client disassociated
(1216753.280000) Lease for IP 192.168.1.67 renewed by host Unknown-
00:25:00:b7:35:f6-2 (MAC 00:25:00:b7:35:f6). lease duration:1440 min
(1216753.270000) Device connected: Hostname: Unknown-00:25:00:b7:35:f6-2
IP: 192.168.1.67 MAC: 00:25.:00-:.b7.:35:f6 Lease time: 1440 min. Unk rate: 54.0
Mbps
(1216753.220000) lease requested
wlanO: STA 00:25:00:b7:35:f6 IEEE 802.11:Client assodat
OUT: BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:55944->23.21.78.229:443 on ppp1)
OUT: BLOCK [9J Packet invafid in connection (TCP
192.168.1.66:34794->31.13.72.33:443 on ppp1)
OUT:BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:41441->31.13.72.33:443 on ppp1)
{1213176.020000) Device disconnected:.Hostname:Unknown-
00:25:00:b7:35:f6-2 IP: 192.168.1.67 MAC:00:25:00:b7:35:f6 wlanO: STA 00:25:00:b7:35:f6 IEEE 802.11: Client disassociated
(1213158.410000) Lease for IP 192.168.1.67 renewed by host Unknown-
00:25:00:b7:35:f6-2 (MAC 00:25:00:b7:35:f6). lease duration:1440 min _./:\ (1213158.400000) Device connected:Hostname:Unknown-00:25:00:b7:35:ftt.Y IP: 192.168.1.67 MAC: 00:25:00:b7:35:f6 Lease time: 1440 min.Unk rate: 54.0
Mbps
(1213158.340000) Lease requested
wlanO: STA 00:25:00:b7:35:f6 IEEE 802.11: Client associated
OUT:BLOCK (9] Packet invalid in connection (TCP
192.168.1.66:59767->176.34.180.243:443 on ppp1) OUT;BLOCK [9] P.acket invalid in connection {TCP
192.168.1.66:56075->31.13.72.33:443 on ppp1) OUT: BLOCK [9] Packet invalid in connection (TCP
192.168.1.66 581:1:0->31.13.72.33:443 on ppp1)
BL.OCKED 2 more packets (because of Packet invalid in connection) OUT:BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:56251->31.13.72.33:443 on ppp1)
OUT:BLOCK [9] Packet invalid in connection (TCP
192.168.1.66:36959->31.13.72.33:443 on ppp1)
BlOCKED 1more packets (because of Packet invalid in connection)It could be that the Ipod touch is having problems with both the 2.4GHz and 5GHz frequencies being named the same. If you give them separate SSids it may help. ie add a 5 to the 5GHz SSid.
If you do this you will need to re-connect all your devices that can see both frequencies to both SSids so that they will swap between the frequencies seamlessly when ever they need to
See link how to change SSid.
http://bt.custhelp.com/app/answers/detail/a_id/44504/related/1/session/L2F2LzEvdGltZS8xMzc1OTY2ODIxL...
Once you have changed the SSid I would delete the network connection on the Ipod touch and start again. -
Amount of RAM useful limited to processor speed?
I have heard that at a certain point the amount of RAM you throw in your computer won't help past a certain processor speed. If this is true, is there a chart out there that will show these limits?
Or if anyone has any opinions as far as a:
Dual 2.7Ghz (G5)
Dual 1.8Ghz (G5)
Dual 800Mhz (G4)
all PowerPC
thanks,
TWithout a list of applications, you could be starving your apps, especially if they need to be open and active. If you work on large photoshop files and not smallish, it is impossible almost to have too much (and you would need a PCIe G5 to get 10-12GB RAM).
Check page-out; number of swap files; whether you are generating swap files.
just scanning and retouching can eat up 2GB RAM.
OS X uses free memory to cache windows, disk I/O, and those won't show up looking at Activity Monitor.
Virtual memory can be 'requested' or 'allocated' but not used, too.
I saw people with 512-768MB be shocked at what a difference even light use (email, web, writing, etc) it was to upgrade their G5 to 1.5GB RAM. There are also programming changes that go into a G5 that are totally different from G4s.
But it has nothing to do with cpu, front side bus.
And no matter what, a nice fast 10K Raptor boot drive always helps
Maybe you are looking for
-
Submit statement in ABAP program
Hi All, I am using two submit statements in my program for two different reports. When i run the program i get the output screens of the two reports at the ouptut. Is there any way i can hide the user seeing the output screens of the two progra
-
Cannot migrate files from old MacBook to new MacBook Pro
I have been trying without success to migrate files from my old MacBook to my new one. The Migration Assistant doesn't work. The new Mac recognizes the old one but the old one cannot see the new one. The old MacBook has OS 10.5.8 and the new MacBo
-
Material Master in more than one plant /purchasing group/Valuation Class
Hi All, How to maintain a Material Master in more than one plant /purchasing group/Valuation Class...... Points shall be awarded accordingly, Regards, Rounak
-
In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps
-
.mov file too big for posting on my website
i am using i-photo to create a slideshow. i've used photos that were 72 dpi on one slideshow and photos that were 300 dpi on another. i have about 55 photos on each slideshow. the 72 dpi slideshow is actually larger than the 300. what gives? i can't