Messages in Pop-over Message Area
Hi,
I have a Pop-over where I have defined a Message Area.
But whenever I try to show a message in the Pop-over's Message Area, the message gets displayed in the Message Area of the View from where this pop-over is invoked.
Please let me know how to fix this.
Regards,
Sherfu
Hi,
Try this threads,
WDA MessageArea
MessageArea
MessageArea in popup
Regards,
Saravanan K
Similar Messages
-
What does this mean on iphone when i am trying to access my email to my iphone (MFMessageErrorDomain error 1032.) Been like this for 3 wks. How can i get this right, it was never like this. Thank you for your help.
Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
I KEEP GETTING A BOX WITH THIS MESSAGE - ADD SECURITY EXCEPTION
you are about to over ride how Thunderbird identifies this site
LOCATION: pop.shaw.ca.110
then it asks for a security certificate
I DO NOT KNOW HOW TO FIX OR BETTER YET GET RID OF THIS MESSAGEYou're supposed to take a screenshot. The link has instructions about how to do that.
Then attach the resulting image to your post by using the 'Browse' button right above the 'Post Reply' button. -
I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.
You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
Status bar icon: browser.popups.showPopupBlocker
Info bar at the top: privacy.popups.showBrowserMessage
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
Why are not pop up message window when message type I and W
Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
IF VAR_MAABC EQ 'A'.
P = 'is significant material'.
CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
MESSAGE P1 TYPE 'E'.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me.......... -
I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities -
I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message that the files are offline or missing??
Just for background, in what format are you exporting your images? Also, are you able to export them to your hard drive in your chosen format? I haven't tried exporting directly to CD, but if you're able to export to hard drive and copy to CD, that may be one solution.
-
I got this laptop refurbished from Apple in July. It was originally released in October 2011. I have watched DVD's on it previously, but lately, in the past 3 weeks, it's been pooping up the "skipping over damaged area" message. I put in a brand new DVD and half way through, it did it again, and I can't get past it. Any thoughts on what the problem may be?
You can just open Terminal (in Utilities) and run the rm command (make sure you type it exactly) and then reboot. With /.AppleSetupDone gone the system will think it is the the second part of an installation, i.e., after it installs and reboots and starts the Setup Assistant. You will see the Welcome and music all over again and then you can go through the setup prompts again, this time specifying a password.
-
My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off and continue working.
Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.
-
Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?
Did you connect your iPad to your computer then open the application on your computer that transfers photos from a camera? Your computer should recognize the iPad as a camera. All photos in the Camera Roll on the iPad should then be seen and you should be able to copy them to the computer using that application.
Photos that were synced to your iPad by connecting to your syncing computer cannot be copied back this way as the master file for those photos are on the syncing computer. -
I'm running Messaging 5.2, build 2002.51.1611 (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005)) and would like to see if I can enable POP over SSL on that host.
According to BugID, 4712887 pop over SSL works. When I follow the instructions in that document, I get the following errors:
./configutil -o service.pop.enablesslport -v 1
General Error: func=configmsg_setkeys; func=psetSetAttrList; error=Attribute does not exist
NO Unable to set option(service.pop.enablesslport)
./configutil -o service.pop.sslport -v 995
[18/Nov/2005:18:34:45 +0000] mocbox5 [16332]: General Error: func=configmsg_setkeys; func=psetSetAttrList; error=Attribute does not exist
NO Unable to set option(service.pop.sslport)
service.pop.sslusessl is set to "yes"
Is this wrong? Does POPS only run on Sun Java Enterprise Messaging (6.x)?
Thanks,
Don Holtzertry using the -l with your configutil setting
configutil -o -l service.pop.enablesslport -v yes
etc. -
Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.
Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
There is a constant pop up message of "Photos are being imported to the photo library."
I cannot close my iPhoto or import any new photos. There is a constant pop up message of "Photos are being imported to the photo library." However, I am NOT importing anything to the library. This is very frustrating.
I cannot force quit. I even tried shutting down the computer manually. When my BRAND NEW IMAC starts back up, the same problem persists.
I also tried re-importing photos from my camera and flip camera. My iPhoto will not allow an import because these non existent photos are being imported. HELP PLEASE!Force Quit iPhoto. It's under the Apple Menu.
Regards
TD -
Hi guys, my ipad2 says that it needs to cool down before using. It has been sitting in a cool place over a day now but the message still pops up. Any other ideas? or help?
Is the iPad Off and not connected to the charger?
Cheers, Tom -
I am getting this pop up message: You are currently browsing the web with and it is recommended that you update your video player to the fastest version available. Please update to continue.
How do I get rid of it? I have tried searching the web and I have only seen solutions for chrome and firefox. Thanks.the link to the page is below
http://www.viesio9q58.com/41612C472C746D6E5047462D522B3A499CE6BD0593A068E7860909 6F792C3C69D19ECDCE71575FC8DABD23D1A0E21C93?PubID=79_3527_3100&tgu_src_lp_domain= www.newallsoft.com&ClickID=7649753723
Maybe you are looking for
-
How to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos
how to get photos from mac to iPhone 6? when i try it just comes up iCloud instead of my photos
-
Can you help advise re video card upgrade for my G4 MDD?
Hello all. Just upgraded to Tiger from 10.2.8 a couple weeks ago. Should have done it long ago... like having a new computer! I want to get more out of the OS for mostly graphic apps like PS-CS2, Painter, Freehand, Fontographer, etc. Right now I have
-
I don't feel safe replacing this. I don't think the customer service rep understood.
I just talked to an agent and described a Verizon box in our apartment. We just moved in and this is a utility box in our apartment that we are dealing with. It's in no way connected to my current service as it was there before we moved in. The batte
-
Uninstalling the trial version of Lightroom 4.2
I cannot uninstall the program via Windows Vista's "Uninstall or Change a Program." When I try, I get this message, "The system administrator has set policies to prevent this installation," then this message, "You do not have sufficient access to uni
-
How do I eliminate the http identity information on the url address line"
When you click on the down arrow on the HTTP line where the last URL address you keyed in is displayed - it will show the history of the last URL addresses you keyed in and visited. It will also display a second line known as "identity information".