Messages issued in the log file Oracle Linux 5.8

Hi Gyry.
I'm just starting to work with Linux, so it is especially not a criticism.
A few days ago I installed Linux 5.8 on Oratsle blade Blade Server IBM. This blade is connected to the storage system through a SAN.
LUN on the storage system is created and mounted to this blade.
On the blade 2 network cards.
Installation of the system was normal. Set up a network card to work with the blade. Spent update packages and made a reboot.
After the restart, the file / var / log / messages shows:
Sep 1 11:56:32 dbhyptest kernel: mtrr: no more MTRRs available
Sep 1 11:56:32 dbhyptest kernel: mtrr: no more MTRRs available
Sep 1 11:59:11 dbhyptest gconfd (root-4820): starting (version 2.14.0), pid 4820 user 'root'
Sep 1 11:59:11 dbhyptest gconfd (root-4820): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 1 11:59:11 dbhyptest gconfd (root-4820): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Sep 1 11:59:11 dbhyptest gconfd (root-4820): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Sep 1 11:59:41 dbhyptest gconfd (root-4820): GConf server is not in use, shutting down.
Sep 1 11:59:41 dbhyptest gconfd (root-4820): Exiting
Sep 2 04:02:34 dbhyptest init: Trying to re-exec init
please tell me is why there are these messages and how to do so they do not show
thanks in advance

TommyReynolds thanks for the reply.
I carefully looked over / var / log / messages and found several posts incomprehensible to me.
I will be very grateful for your comments - forum members.
These messages are generated after upgrading all packages Oratsle Linux 5.8 and reboot it.
I'm a beginner in Linux administration, so Sorry that I can not yet understanding messages
The following message I'm interested allocated:
Sep 1 11:56:21 dbhyptest kernel: ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM )
Sep 1 11:56:21 dbhyptest kernel: ACPI: XSDT 000000007f7fe120 00084 (v01 IBM BLADE 00000000 01000013)
Sep 1 11:56:21 dbhyptest kernel: ACPI: FACP 000000007f7fb000 000F4 (v04 IBM BLADE 00000000 IBM 01000013)
Sep 1 11:56:21 dbhyptest kernel: ACPI _**Warning: Invalid length for Pm1aControlBlock: 32, using default 16*_ (20090903/tbfadt-607)
Sep 1 11:56:21 dbhyptest kernel: ACPI: DSDT 000000007f7f8000 0224E (v01 IBM BLADE 00000003 IBM 01000013)
Sep 1 11:56:23 dbhyptest kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.*
Sep 1 11:56:23 dbhyptest kernel: RPC: Registered udp transport module.
Sep 1 11:56:23 dbhyptest kernel: RPC: Registered tcp transport module.
Sep 1 11:56:23 dbhyptest kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 1 11:56:23 dbhyptest kernel: warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)_
Sep 1 11:56:23 dbhyptest kernel: Bluetooth: Core ver 2.15
Sep 1 11:56:23 dbhyptest kernel: NET: Registered protocol family 31
Sep 1 11:56:23 dbhyptest kernel: Bluetooth: HCI device and connection manager initialized
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: Successfully dropped root privileges.
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: avahi-daemon 0.6.16 starting up.
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!_
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: Successfully called chroot().
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: Successfully dropped remaining capabilities.
Sep 1 11:56:29 dbhyptest avahi-daemon[4546]: No service found in /etc/avahi/services.
Sep 1 11:56:29 dbhyptest smartd[4566]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Sep 1 11:56:29 dbhyptest smartd[4566]: Home page is ttp://smartmontools.sourceforge.net/
Sep 1 11:56:29 dbhyptest smartd[4566]: Opened configuration file /etc/smartd.conf
Sep 1 11:56:29 dbhyptest smartd[4566]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Sep 1 11:56:29 dbhyptest smartd[4566]: Problem creating device name scan list_
Sep 1 11:56:29 dbhyptest smartd[4566]: Device: /dev/sda, opened
Sep 1 11:56:29 dbhyptest smartd[4566]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features
Sep 1 11:56:29 dbhyptest smartd[4566]: Device: /dev/sdb, opened
Sep 1 11:56:29 dbhyptest smartd[4566]: Device: /dev/sdb, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdb' to turn on SMART features

Similar Messages

Robocopy Log File - Skipped files - Interpreting the Log file

Hey all,
I am migrating our main file server that contains approximately 8TB of data. I am doing it a few large folders at a time. The folder below is about 1.2TB. Looking at the log file (which is over 330MB) I can see it skipped a large number of files,
however I haven't found text in the file where it specifies what was skipped, any idea on what I should search for?
I used the following Robocopy command to transfer the data:
robocopy E:\DATA Z:\DATA /MIR /SEC /W:5 /R:3 /LOG:"Z:\Log\data\log.txt"
The final log output is:
Total Copied Skipped Mismatch FAILED Extras
Dirs : 141093 134629 6464 0 0 0
Files : 1498053 1310982 160208 0 26863 231
Bytes :2024.244 g1894.768 g 117.468 g 0 12.007 g 505.38 m
Times : 0:00:00 18:15:41 0:01:00 -18:-16:-41
Speed : 30946657 Bytes/sec.
Speed : 1770.781 MegaBytes/min.
Ended : Thu Jul 03 04:05:33 2014
I assume some are files that are in use but others may be permissions issues, does the log file detail why a file is not copied?
TIA
Carl

Hi.
Files that are skipped are files that already exists. Files that are open/permissions etc will be listed under failed. As Noah said use /v too see which files were skipped. From robocopy /?:
:: Logging Options :
/V :: produce Verbose output, showing skipped files.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

XMLForm Service message keep showing in the log file

Hello,
The message below keeps showing in the log file when the form is opening in Workspace ES. It keeps repeating like hundred times in the log file when the form is launching.
It just happen to some forms but not to all forms. I tried to see if there is any thing strange in the form but could not find any thing wrong in the form nor any explaination about this error on Adobe site or Internet. Note that I am still using LiveCycle ES 8.2.1 with SP3.
=============
[10/18/11 13:46:22:644 CDT] 0000003e XMLFormServic W com.adobe.service.ProcessResource$ManagerImpl log ALC-XTG-102-001: [1712] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
============
Can any one please advise.
Thanks in advance,
Han

Yes,
Upgrade it to SP1 with hot-fix. SUN has a very big bug in the 4.16 SP1 software . u have to apply that hot-fix otherwise you will in big bug in userpassword attribute and some other security issues.

Bursting Program Ends in Error with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

Bursting Program Errors Out with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

Unable to debug the Data Template Error in the Log file

Hi,
I am unable to debug the log file error message Please can anybody explain me in detail where the error lies and how to solve the error.The log file shows the following message.
XDO Data Engine ver 1.0
Resp: 50554
Org ID : 204
Request ID: 2865643
All Parameters: USER_ID=1318:REPORT_TYPE=Report Only:P_SET_OF_BOOKS_ID=1:TRNS_STATUS=Posted:P_APPROVED=Not Approved:PERIOD=Sep-05
Data Template Code: ILDVAPDN
Data Template Application Short Name: CLE
Debug Flag: Y
{TRNS_STATUS=Posted, REPORT_TYPE=Report Only, PERIOD=Sep-05, USER_ID=1318, P_SET_OF_BOOKS_ID=1, P_APPROVED=Not Approved}
Calling XDO Data Engine...
java.lang.NullPointerException
     at oracle.apps.xdo.dataengine.DataTemplateParser.getObjectVlaue(DataTemplateParser.java:1424)
     at oracle.apps.xdo.dataengine.DataTemplateParser.replaceSubstituteVariables(DataTemplateParser.java:1226)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:398)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:281)
     at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:251)
     at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:192)
     at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:222)
     at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:334)
     at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:236)
     at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:272)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Start of log messages from FND_FILE
Start of After parameter Report Trigger Execution..
Gl Set of Books.....P
Organization NameVision Operations
Entering TRNS STATUS POSTED****** 648Posted
end of the trns status..687 Posted
currency_code 20USD
P_PRECISION 272
precision 332
GL NAME 40Vision Operations (USA)
Executing the procedure get format ..
ExecutED the procedure get format and the Result..
End of Before Report Execution..
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 2865643 on node AP615CMR at 28-SEP-2006 07:58:26.
Post-processing of request 2865643 failed at 28-SEP-2006 07:58:38 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 28-SEP-2006 07:58:38
Thanks & Regards
Suresh Singh

Generally the DBAs are aware of the OPP service log. They can tell you the cause of the problem.
Anyway, how did you resolve the issue?

Issue to install mhVTL on Oracle Linux 5.9

Hi Everyone
I'm dealing with an issue to install mhVTL on Oracle Linux 5.9, my current operating system. My goal is to install Oracle Secure Backup once that mhVTL is running.
According to the the link https://sites.google.com/site/linuxvtl2, I have followd this steps:
1.- rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
2.- rpm -Uvh http://www.elrepo.org/elrepo-release-5-4.el5.elrepo.noarch.rpm
3.- rpm -Uhv http://dl.atrpms.net/el5-x86_64/atrpms/stable/atrpms-repo-5-6.el5.x86_64.rpm
* NOTE: By default, the liblzo2_2 is not installed and my box doesn't have a repository to find it. For this reason I have installed this rpm file that let my box access a repository with the liblzo2_2 lib
4.- yum yum install liblzo2_2
5. sudo yum install mhvtl-utils kmod-mhvtl
After running all this steps, I get the following message if I perform /etc/init.d/mhvtl start:
/etc/init.d/mhvtl start
FATAL: Module mhvtl not found.
No kernel module loaded to feed these daemons.
Need mhvtl kernel module version at least 0.18.11
Did you remember to compile the 'mhvtl' kernel module ?
Please see http://sites.google.com/site/linuxvtl2/
According to this message, I understand, that I haven't install the kernel, so I have downloaded and uncompressed the mhvtl-2013-10-20.tgz file but with no success
1. tar xvzf mhvtl-2013-10-20
2. mhvtl-1.4
3. cd kernel
4. # make
Output:
make -C /lib/modules/2.6.39-400.211.3.el5uek/build SUBDIRS=/tmp/mhvtl-1.4/kernel modules
make: *** /lib/modules/2.6.39-400.211.3.el5uek/build: No such file or directory. Stop.
make: *** [default] Error 2
does someone have a tip to help me with this issue?
Thank you in advance

If the problem is only to install Xvfb, you can do that doing the following:
# yum list "*xvfb*"
Available Packages
xorg-x11-server-Xvfb.x86_64 1.15.0-22.el6 public_ol6_latest
# yum install xorg-x11-server-Xvfb

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

MDIS failed to generate the Log file!!!

Hello All,
Having a issue where MDIS is not generating the log file..
The scenario is something like this-
The files are getting archived and the records not flowing into MDM
Basis team says-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txt is empty, the file will be skipped
But the source file was having data it was not empty(bit strange!!)
Also its not generating the LOG to analyze
Regards,
Girish

Hi Shenoy,
Let me explain the scenario--
User uploads the file through Portal and through FTP records resides in MDM...the issues is when i tried to import through IM it worked and i tried manually push file through Filezilla FTP it worked.
But when we upload file through portal, the file resides in Archive and generating the message-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txtis empty, the file will be skipped
But the file is having data.
Regards,
Girish

UTC Warning Message each second in log file

Hi,
i'm running a Oracle NoSQL Store (2.0.23) in a 2 node environment.
In the web admin interface under "logs" i find the message
+"UTC WARNING [rg1-rn2] Exception in ResolveHandlerThread when contacting:rg1-rn2"+
repeating each second.
A more detailled error message can be found in log-file rg1-rn2_0.log, which resides on second node of my store:
+2013-01-23 14:14:37.703 UTC WARNING [rg1-rn2] Exception in ResolveHandlerThread when contacting:rg1-rn2+
java.lang.NullPointerException
at oracle.kv.impl.util.registry.RegistryUtils.getRequestHandler(RegistryUtils.java:125)
at oracle.kv.impl.api.rgstate.RepNodeState$ReqHandlerRef.resolve(RepNodeState.java:592)
at oracle.kv.impl.api.rgstate.RepNodeState.resolveReqHandlerRef(RepNodeState.java:181)
at oracle.kv.impl.api.rgstate.RepNodeStateUpdateThread$ResolveHandler.run(RepNodeStateUpdateThread.java:395)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
When validating/verifying the store (either by web interface or by CLI), everything seems to be ok.
Output from CLI (strangely no performance information from rg1-rn2, which reports messages above):
kv-> show topology
store=sicstore numPartitions=300 sequence=307
+dc=[dc1] name=SicDC repFactor=2+
+sn=[sn1] dc=dc1 than-pc:5000 capacity=1 RUNNING+
+[rg1-rn1] RUNNING+
single-op avg latency=0.041355196 ms multi-op avg latency=1.6138855 ms
+sn=[sn2] dc=dc1 10.74.10.221:5000 capacity=1 RUNNING+
+[rg1-rn2] RUNNING+
No performance info available
+shard=[rg1] num partitions=300+
+[rg1-rn1] sn=sn1+
+[rg1-rn2] sn=sn2+
kv-> topology validate
Validation for the current deployed topology:
No problems
kv->
From web interface:
Verification complete, no violations.
Is the error message resulting from a slight (< 1 sec) difference of time on both nodes? I'm not able
to sync the time on both machines via ntp, as on one of them i do not have rights to modify time
settings (system is only for training purpose).
If so, can i ignore the warning or do i have to expect some side-effects?
Thanks & Regards
Thomas

I'm updating this thread. Thomas and I have had some offline communication regarding the log files and the store. The brief summary is that it's not yet clear why this situation arose but there are some clues:
1. The 2-node store started off with a clock skew problem that caused it to not work at all
2. Thomas fixed the skew and retried the deployment plans keeping the store intact (most people tend to make a new store when this happens)
3. The store became functional but in a state where an internal thread would log a warning every second
The development team is still looking into this.
Note: the fact that Windows 7 was involved is probably not a factor.
Disclaimer: technically Oracle NoSQL Database is not supported on that platform.
Regards,
George

Internal Error has occured, Check the log file

Hello all,
After i login to my OEM grid console, i get the message
"Internal Error has occured. Check the log file for details."
once i press the OK button, i directs me to the home page as if noting has occured. I was happening rarely previosly and now its a regular thing.
Which log file am i supposed to check?
TIA,
Jj

Hey:
I know it was a month ago when you posted. I'm getting the same messages now. Win 2K3, SP2 + all patches. Walked through basic install with Oracle's help. They're interested in emoms.trc/log and the alert log (although the alert log has been clear).
Thx
Tony

Internal Error has occurred. Check the log file for details.

Hello Experts,
After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
Thank you.

internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
this is the problem which you are facing??>

Where is the log file in 10.1.3 AS?

Hi
I am writing System.out.println statements and want to check those messages in the log file. But not sure where the log file is. Appreciate if you can respond.

By default all OC4J stderr and stdout messages go in following file:
$ORACLE_HOME/opmn/logs/OC4J~home~default_group~1
If you want you can change it, refer following for that:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28950/sysprops.htm#CHDDCCJI
Thanks
Shail

To trace the log file

Hi,
I've got the following problem in my Home Computer PC even if I've removed all folders within
D:\Documents and Settings\chen.peter\Application Data\JDeveloper\system11.1.1.4.37.59.23
except
D:\Documents and Settings\chen.peter\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
<2011年6月25日下午05時05分54秒 CST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'app4'.>
<2011年6月25日下午05時05分54秒 CST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
     at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: The Network Adapter could not establish the connection
     at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
     at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
     at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1154)
     Truncated. see log file for complete stacktrace
>
[05:05:55 PM] #### Deployment incomplete. ####
[05:05:55 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application app4 due to error deploying to IntegratedWebLogicServer.
[Application app4 stopped and undeployed from Server Instance IntegratedWebLogicServer]
Where is the log file for me to trace it?
Best regards

You'll find the logs in the folder
D:\Documents and Settings\chen.peter\Application Data\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\logs
The error message suggest that our connection to the db is not correct.
Timo

NWDS : Problems during startup. Check the".log" file in "metadata" of your workspace.

Hi,
NWDS version : Version 7.0.17
I am unable to open NWDS.
While opening the NWDS i see an pop-up message saying below :
I have serached in forums and tried with the following steps :
1) Deleted .metadata file in Workspace, restarted my system. (Issues still persists)
2) Checked in Task manager if any instance is running Ex : "SAPIDE.exe"
In the Log file i see that there are few plugins missing as below :
!SESSION Dec 01, 2012 11:17:11.267 ---------------------------------------------
java.version=1.6.0_26
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide - data E:\Workspace C:\Program Files\Java\jdk1.6.0_26\bin\javaw.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\IDE\IDE70\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600
- data E:\Workspace -data E:\Workspace -install file:C:/Program Files/SAP/IDE/IDE70/eclipse/
!ENTRY org.eclipse.core.runtime 2 1 Dec 01, 2012 11:17:11.283
!MESSAGE Problems encountered loading the plug-in registry.
!SUBENTRY 1 org.eclipse.core.runtime 2 1 Dec 01, 2012 11:17:11.283
!MESSAGE Plug-in "com.sap.tc.jtools.jlin.core" was disabled due to missing or disabled prerequisite plug-in "com.sap.tc.jtools.util".
!SUBENTRY 1 org.eclipse.core.runtime 2 1 Dec 01, 2012 11:17:11.283
!MESSAGE Plug-in "com.sap.tc.jtools.jlin.java" was disabled due to missing or disabled prerequisite plug-in "com.sap.tc.jtools.jlin.core".
!SUBENTRY 1 org.eclipse.core.runtime 2 1 Dec 01, 2012 11:17:11.283
!MESSAGE Unable to satisfy prerequisite constraint from "com.sap.tc.jtools.jlin.devel" to "com.sap.tc.jtools.jlin.core".
!SUBENTRY 1 org.eclipse.core.runtime 2 1 Dec 01, 2012 11:17:11.283
!MESSAGE Unable to satisfy prerequisite constraint from "com.sap.tc.jtools.jlin.ui" to "com.sap.tc.jtools.jlin.core".
!SESSION ----------------------------------------------------------------------
!ENTRY org.eclipse.core.launcher 4 0 Dec 01, 2012 11:17:19.885
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.NoClassDefFoundError: org/eclipse/ui/IStartup
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClass(DelegatingURLClassLoader.java:922)
at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:166)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:700)
at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at org.eclipse.core.internal.plugins.PluginDescriptor.createExecutableExtension(PluginDescriptor.java:130)
at org.eclipse.core.internal.plugins.PluginDescriptor.createExecutableExtension(PluginDescriptor.java:167)
at org.eclipse.core.internal.plugins.ConfigurationElement.createExecutableExtension(ConfigurationElement.java:103)
at org.eclipse.core.internal.runtime.InternalPlatform.loaderGetRunnable(InternalPlatform.java:578)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.core.internal.boot.InternalBootLoader.getRunnable(InternalBootLoader.java:471)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:854)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.ClassNotFoundException: org.eclipse.ui.IStartup
at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:866)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 41 more
Any suggestions will be appreciated!
Best Regards,
KC

Have you tried this: http://help.sap.com/saphelp_nw04/helpdata/en/9d/eb813f0e614a18e10000000a114084/content.htm
Pass the VM as a argument. Make sure it is 32 bit, for NWDS 7.0 a JDK 1.4 should be used. Easiest way to try it out is to open the shell:
cmd
navigate to the directory of NWDS and enter:
SapIde.exe vm "C:\path\to\java\bin\javaw.exe"

Messages issued in the log file Oracle Linux 5.8

Similar Messages

Maybe you are looking for