Messages missing after phone replaced in iPhone 5 + iOS 7

Hi,
I recently got my iPhone 5 replaced from the service center. After that I am not able to access my older messages. When I checked the icloud drive, I can see that a new device has been created for my fresh piece. I have used the newer device for sometime now, so, there is data on this also. I think "Restore and Reset Data" might help me get the data from my older phone?
All I need are the messages from my older phone that is on the icloud backup. Can anyone please help?
Thanks,
Arka.

Hey arkafrommumbai,
Thanks for the question. It sounds like you have received a new replacement iPhone and would like to restore it with the backup of your previous device. The following resource should assist you in doing so (simply skip to the “Set up your new device” section and proceed):
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/ht2109
Thanks,
Matt M.

Similar Messages

  • Personal Hotspot menu disappeared after I updated my iPhone to iOS 4.3.3

    Personal Hotspot menu disappeared after I updated my iPhone to iOS 4.3.3
    My carrier provides tethering service and I used it often so I don't think this is from network problem.
    What I remember is that after I upgrade my iPhone to iOS 4.3.3 I once activated personal hotspot function and it was hanged.
    So I reboot my iPhone and the menu disappeared. Is this another bug that is from iOS 4.3.3??

    What is the exact wording of the error message you received?
    Has your iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    Not wise to post IMEI or ICCID in the clear, FYI. I have asked
    the hosts to edit that info in your post.

  • After i update my iphone to ios 7.0.3 my wifi always disconnect.

    After i update my iphone to ios 7.0.3 my wifi always disconnect.

    Me too
    iPhone 5s 32GB worked perfect until upgrade to 7.0.3
    Won't recognise home WiFi network, can't see other WiFi networks in range, association problems with WiFi networks. 3G data also severerly impacted along with complaints that the quality of voice calls has degraded severely.
    I've tried:
    Settings > General > Reset > Reset network settings x 3 times - No joy
    plus
    Settings > General > Reset > Erase All Content and Settings x 4 times and backup or new phone setup via iTunes - Still no joy
    One odd thing - lower signal WiFi does internittently become available when my PC that runs iTunes is booted up and logged into my WiFi network???
    Help!

  • HT4623 Sitting my new iphone 5 next to my old iphone 4s all the whites on the Iphone 5 look Yellow and overwarm! Would i be elligable for a replacement? iPhone 5, iOS 6

    Sitting my new iphone 5 next to my old iphone 4s all the whites on the Iphone 5 look Yellow and overwarm! Would i be elligable for a replacement like a new one?
    Sitting my new iphone 5 next to my old iphone 4s all the whites on the Iphone 5 look Yellow and overwarm! Would i be elligable for a replacement?
    iPhone 5, iOS 6

    Oh, look around on this forum.  Someone else had the same question and it was answered.  It just takes a little time to set and should be fine.

  • HT4623 After update of my iphone 3GS ios, I found out that my iphone has returned back to factory setting. It shows on the screen that I need to sett up my iphone so as to start using. I followed the on screen display but the step keeps failing

    Dear Community,
    Please can someone assist me on what to do on the following;
    After update  of my iphone 3GS ios. I found out that my iphone has returned back to factory setting and it shows No Service on the top left corner of my iphone screen. It equally shows on the screen that I have to set up the iphone before using it again. I followed the on screen display then get connected to a WiFi, but the response I was getting is that the Set up Server cannot be contacted please try again latter. I chose the option of using itune through my Laptop. The response I was getting here is that my iphone cannot be connected the itune store because my iphone was not found.
    I am regretting why I updated the ios. Please, can someone advise me on what to do please.
    I am ernestly waiting for your kind response.
    Regards
    Daniel

    Hi iPheariPhoPad,
    Welcome to Apple Support Communities.
    It sounds like there’s an issue with Settings, the Notes app entry isn’t showing up as expected. Take a look at the article linked below and try restarting your iPhone 3GS.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If that doesn’t do it, try restoring your iPhone as shown in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Take care,
    -Jason

  • I'm unable to open itunes after the recent upgrade. Runtime error R6034 is the error message. I recently replaced my iPhone and I don't want to loose my data by uninstalling and re-installing the itunes?

    Hi,
    I've recently replaced my iphone 5 and I couldn't restore my data into my new phone, as it asked me to do the software upgrade on itunes in my computer. So, I did the itunes upgrade, which is now causing the Runtime error R6034. I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps. Plz advice, as how this runtime error can be fixed and at the sametime, I will still be able to restore my data into my new phone.

    Suresh14 wrote:
    I wonder if I would loose my data (i.e., can't restore the data into my new phone), if I follow the uninstalling & re-installing steps.
    Uninstalling & Re-installing iTunes will not delete your iTunes Library Data.
    Do the following:
    Uninstall from Windows the following four programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

  • Handoff does not work after phone replacement.

    Dear all,
    I'm using iPhone 6 and Macbook Pro Retina 2014 mid and getting some trouble with using continuity on Yosemite.
    Before I use iPhone 5s 16G(IOS 8.1.1)when it was not thrown to the water , continuity does work so well.  But after that, replacing it for iPhone 6, it does not.
    I think it could be happen since my previous iPhone 5s cannot be logout from iCloud but i don't know why exactly.
    so could you give me some advice for fixing it?
    I'm currently using iPhone 6 (64G)with IOS 8.1.1 (12B436) and Macbook Pro Retina 15" with OS X Yosemite 10.10.1(14B25)
    and I also tried to solve this problem with logout/in from iCloud and handoff off/on, rebooting both devices but failed.
    The only working function of the continuity is SMS sync.
    Could you please help me solve this problem?

    I thought I'd post you a quick response because you described exactly the issues I was having. After my phone was idle for a while, my iPhone would refuse to get data over 3G.
    I've tested this thoroughly and I'm able to "trip up" the phone into a state where it can't download data from the 3G network. But turning airline mode on for about 30 seconds then off again resets forces a renegotiate with the cell tower/3g and everything seems to work again about a minute later.
    Nothing untoward listed in the console at this point either - The PDP context that you mentioned that was deactivated was more than likely the Internet Tethering. (It's usually PDP context 1, by the looks of things).
    I think I might switch off 3G and see if that helps until Apple fix this issue. It is related to the wifi issues that others have reported - As I've seen my iPhone unable to download information via 3G if wifi is turned on, but you don't connect to a wifi network. But I can't seem to reproduce this reliably.
    -Soen

  • Error message 1 after trying to restore iPhone 4, after upgrading it to iOS 5

    I keep getting error message 1 after trying to restore my non-jailbreaked iPhone 4 after trying to upgrading it to IOS 5. The phone only displays a picture of the iTunes logo and a USB cable. I have tried everything  I could find on the internet such as holding the homebutton while connecting the phone to iTunes, restarting the computer, switching computers, restore with another cable, take out the simcard etc. It works fine until the verry end, that's when I get the message. Please help!

         Try downloading the 3rd party application called "Tiny Umbrella". While it isn't a software distributed by Apple it will be able to kick your iPhone out of the boot loop.
    Mac OS X download, click here.
    Windows XP/Vista/7 download, click here.

  • Satellite M30: Power Saver options missing after motherboard replacement

    Hi all,
    I've just received my laptop back from the service center, and unsurprisingly they stuffed up a feature that used to exist!
    I had taken my laptop (M30 1.7GHz Special Edition) to the repair center for a defect and they informed me that the motherboard needed to be replaced. I received the laptop back a couple of days ago and I immediately noticed the laptop getting overheated, the fan did not turn on as frequently as it used to when setting the profile to "Full Power".
    After hours of investigation, I noticed that a few options that used to exist in the Toshiba Power Saver does NOT exist anymore. Thus, I feel my laptop is running as in battery optimised even though it's set to full power.
    As I said, the fan is not turning on as frequently, leading to the laptop getting overheated. While the fan used to be almost constantly ON on full power prior to the replacement of the motherboard.
    Here's how the power saver used to look like "prior" to taking the laptop to the repair center:
    http://www.foxpop.com/imre/2006/toshibatecram3review/toshibapowersaver1.gif
    And here's how the power saver looks like now, after the replacement of the motherboard:
    http://www.ixbt.com/portopc/toshiba-satellite/power.png
    with the CPU processing speed maximum of 3, instead of 4.
    Notice how I'm now missing the "CPU control method" option, and I'm unable to set the processing speed to more than level 3!
    The cooling method does not seem maximum performance to me either, due to the symptoms I mentioned above.
    Any idea on why that might have happend? Please note that I used the system recovery CD and returned everything to the factory settings, still no luck. I'm sick and tired of going back to their lousy repair center. If someone can point out the problem I will be very grateful.
    P.S. I'm using version 7 of the power saver, BIOS verion 1.4 (original)
    Thanks in advance.

    Hi
    I wonder why you did not contact the service guys again.
    After the reparation everything should works fine and if the notebook does not run properly you should immediately report it! In my opinion its a warranty claim.
    However, in my knowledge after the motherboard replacement the micro code on the board must be updated therewith the CPU could run with full performance.
    What CPU speed appears in the windows system?
    Im not 100% sure if the missing microcode update is responsible for your problem but I would recommend asking the ASP for opinion.

  • My iCloud will not back up after I replaced my iPhone

    Hi, I need help with my iCloud backup.  I recently replaced my iPhone 4 with a brand new one, and now it is saying I dont have enough storage and I am unable to backup using iCloud. The phone still says I have data space left, and I do not have any more or less space than my last phone.  Can someone please help??
    Thank you!

    wtmichael wrote:
    when i do this it says this backup cannot be deleted because it is in use,  the old phone has been restored to factory settings to be shipped back to the insurance co.
    That should clear up on its own, but may take 3-5 days to do so.  Wait a few days and try again.

  • Is anyone else having problems selecting the message field after typing in the recipient in iOS 6.1 update?

    Just updated iPhone 5 and I can't start new messages because you can't select message field after typing in message recipients

    Mines fine, I did a hard reset after the update and with both bluetooth and wifi and celluar data on I am geting slightly better battery life on my iPhone 5s. right now Im at 83% with 1 hour and 24 mins useage and 1 day 14 hours standbye. Siome apps leach battery life so check whats using background app refresh and notifications, apps like facebook and also GPS useage suck your phone dry quickly.

  • TS1424 I can't open the iTune store after I updated my iphone to iOS 7.

    Hi there, could someone help me here please - I can't open the iTune store after I updated my iphone 4 to iOS 7. The problem occurred about 5 days later after the upgrade. There are no error messages. As I tap on the icon it opens just for a fraction of a moment and then goes off and back to the main screen. Other apps are working just fine. I tried following the troubleshooting steps as suggested by apple support, but that didn't help unfortunately...
    Thank you

    Refer to this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • How do I sync my data from a windows phone to an iPhone 4 iOS 7.1.2

    i need help syncing my data from a windows phone to a iPhone.

    Assuming you have your Windows Phone data synced to Microsoft's Outlook.com, or even Gmail,
    You can setup the Outlook.com or Gmail account in Settings->Email, Contacts, Calendars->Accounts->Add Account
    And it will download all data from there. Email, contacts, etc..
    Other than that, you will have to export all your data from the Windows phone, and then use iTunes to Sync whatever is relevant onto the iPhone.

  • Nokia 5233 messages lost after phone restart

    Hi,
    I'm having a weird problem with my nokia 5233.  It happened to me twice now that after restarting the device, I would lose all of my messages including messages in my folders and drafts and even sent messages.  I have opted to save all my messages in my memory card, which is Kingston 4GB. What might be causing the problem and if I can recover my messages, as I have very important messages in there..........And if there is any solution on preventing this catastrophe again................
    Thanks
    Iftikhar

    This seems to be a common issue with the S60 mobile operating system.  No comment from Nokia regarding a resolution so far.
    My E75 phone has also experienced the disappearing-messages-act saved in my SD card when my phone restarted from a low battery shut down.  Inbox/Draft/Sent Items were completely wiped out.
    I tried to change the SMS location from SD Card to Phone Memory then back to SD Card again.
    I also tried to (safely & properly) remove the SD Card then reinserted it back.  Still no go.
    The worst part is that I spent 3 days searching the Internet and found that it's not rare for this problem to occur on an S60 platform yet no resolution from the web nor does Nokia offer any solution to it's customers.
    They're about to lose a 12 year loyal and solid Nokia Fan (along with his friends and relatives to migrate to the Blackberry & iPhone Bandwagon) soon if they can't help us retrieve the important messages that was wiped out from our inbox. <sigh>..
    Pictures and all other files stored in the SD Card are still intact.  It's just my 3,000++ important SMS that's wiped out.

  • Mail messages missing after copying to new folder

    I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
    When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
    Also If I try to export the mailbox, not all of the mail message are exported.
    It seems very difficult to find out what is causing the problem.
    I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
    Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

    I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
    When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
    Also If I try to export the mailbox, not all of the mail message are exported.
    It seems very difficult to find out what is causing the problem.
    I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
    Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

Maybe you are looking for