Messages missing after WSDL import

Hi,
I imported the WDSL of a WebService in External Definitions in SAP XI. Unfortunately, I cannot see any messages. For other WebServices, this procedure worked fine.
Any ideas?
Regards
Volker

Hi Volker,
Go thru the following threads it might be helpful:
wsdl import and message in XI
WSDL upload not showing namespace OR message
Do share whether they helped you or not...
Regards
Suraj

Similar Messages

Mail messages missing after upgrade to 10.4.3

Short story: I upgraded a Mac from 10.3.9 to 10.4.3 and now none of my old received mail messages are in my inbox.
Long story: Installed Tiger using "Archive and install". Repaired permissions. Installed the combo updater to 10.4.3 using software update. Repaired permissions again. After the system was upgraded to 10.4.3 I opened mail. It said it was importing messages. However, when it was done, there were only 6 messages from the last few days. The other 400 or so messages that had been in mail (in the inbox) in the previous version were not in the mailbox. I tried rebuilding the mailbox. This resulted in losing all of these 6 messages. I tried importing from the old account mailbox and mail re-created the mailbox structure, again with only 6 messages in the inbox.
I have tried re-importing my inbox which is listed as 18.2 mb in size but I get a dialog box that says there are no valid mail messages to be imported. I have tried importing messages from my backup disk, a backup created before the 10.4.3 upgrade but it gives me the same “no valid messages to be imported.” I have tried rebooting but there are still only 6 messages in the inbox to be seen.
Of note, the sent mail box is full of messages and appears to have been upgraded appropriately.
The application mail and all associated mailboxes etc are in their default locations. I have not moved or modified any of the locations of files.
Any ideas on what happened and more importantly how to restore or otherwise make visible all of my mail messages?
Thanks,
Pete

Hi Ernie! I really appreciate your assistance. Are you ready for this? I had 13 POP accounts... Here is the current info on the files on my Mac (upgraded from 10.3.9 to 10.4.3 last night)
Pop Account 1 Folder (Main email account lost all inbox messages)
INBOX.mbox contains:
- content_index (3.9 MB)
- content_index-h-67-100-128-207.sttnwaho.dynamic.covad.net-542 (5.3MB)
- Info.plist (4KB)
- mbox (117.1 MB)
- Messages (empty folder)
- Messages-T0x560b9f0-pyksdq (contains file named 1.emix, 4KB)
- tableofcontents (264 KB)
Pop Account 2 Folder (Smaller email account appears to be intact)
INBOX.mbox contains:
- content_index (208 KB)
- Info.plist (4KB)
- mbox (416 KB)
- Messages (Folder contains 31 "emix" files, 488 KB)
- tableofcontents (8 KB)
Pop Account 3 Folder (Minor email account - not much was here, might be ok)
INBOX.mbox contains:
- content_index (16 kB)
- content_index-h-67-100-128-207.sttnwaho.dynamic.covad.net-542 (8 KB)
- Info.plist (4 KB)
- mbox (4 KB)
- Messages (Folder contains 1 "emix" file, 4KB)
- tableofcontents (4 KB)
Pop Account 4 Folder (important email account lost all inbox messages)
INBOX.mbox contains:
- content_index (1.4 MB)
- content_index-h-66-167-49-109.sttnwaho.dynamic.covad.net-455 (1.4 MB)
- Info.plist (4KB)
- mbox (3.3 MB)
- Messages (empty folder)
- Messages-T0x560b9f0-4voERb (contains 1 "emix" file, 4KB)
- tableofcontents (40 KB)
Pop Account 5 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (20 kB)
- Info.plist (4 KB)
- mbox (8 KB)
- Messages (Folder contains 2 "emix" files, 12 KB)
- tableofcontents (4 KB)
Pop Account 6 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (8 kB)
- Info.plist (4 KB)
- mbox (4 KB)
- Messages (Folder contains 1 "emix" file, 4 KB)
- tableofcontents (4 KB)
Pop Account 7 Folder (important email account - inbox seemed to come through - not positive it is all there, but it looks good)
INBOX.mbox contains:
- content_index (2.8 MB)
- content_index-localhost-574 (2 MB)
- Info.plist (4KB)
- mbox (25.9 MB)
- Messages (Folder contains 670 "emix" files, 25.9 MB)
- tableofcontents (176 KB)
Pop Account 8 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (628 MB)
- Info.plist (4KB)
- mbox (2.7 MB)
- Messages (Folder contains 130 "emix" files, 2.9 MB)
- tableofcontents (28 KB)
Pop Account 9 Folder (Minor email account - couple messages made it)
INBOX.mbox contains:
- content_index (116 KB)
- Info.plist (4 KB)
- mbox (1.9 KB)
- Messages (Folder contains 4 "emix" files, 1.7MB)
- tableofcontents (8 KB)
Pop Account 10 Folder (Smaller email account appears to be intact)
INBOX.mbox contains:
- content_index (16 KB)
- Info.plist (4KB)
- mbox (12 KB)
- Messages (Folder contains 4 "emix" files, 20 KB)
- tableofcontents (4 KB)
Pop Account 11 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (756 MB)
- Info.plist (4KB)
- mbox (13.6 MB)
- Messages (Folder contains 152 "emix" files, 12.3 MB)
- tableofcontents (60 KB)
Pop Account 12 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (500 MB)
- Info.plist (4KB)
- mbox (5.7 MB)
- Messages (Folder contains 93 "emix" files, 5.5 MB)
- tableofcontents (24 KB)
Pop Account 13 Folder (inbox messages appearing - not sure they are all there)
INBOX.mbox contains:
- content_index (80 MB)
- Info.plist (4KB)
- mbox (128 KB)
- Messages (Folder contains 13 "emix" files, 148 KB)
- tableofcontents (4 KB)
When I compare the above INBOX.mbox files to the 13 POP account folders in my pre-upgrade Retrospect Backup, the files sizes match, but the difference is there are no "Messages" folders in the backup - I assume these are folders/files Tiger built (and screwed up) during my first launch/import of the Upgraded Mail.
Thanks again for looking at this.
Mary

Photos missing after directory import

Hello,
I've experienced a problem during photo imports where the photo will be in the Originals directory, but not show up anywhere in the album.
For example, after an import this is in the iPhoto Library/Originals/2006/Philadelphia directory
-rw-r--r-- 1 camilama camilama 316874 Jun 12 15:09 Philadelphia 03.12.06 00023.JPG
-rw-r--r-- 1 camilama camilama 384930 Jun 12 15:09 Philadelphia 03.12.06 00025.JPG
-rw-r--r-- 1 camilama camilama 404110 Jun 12 15:09 Philadelphia 03.12.06 00026.JPG
-rwxrwxrwx 1 camilama camilama 233291 May 11 2006 Philadelphia pig 1.jpg
-rwxrwxrwx 1 camilama camilama 271247 May 11 2006 Philadelphia pig.jpg
The files "Philadelpia pig.jpg", and "Philadelphia pig.jpg" do not show up while browsing the library. For some reason their file permissions are different and the timestamp didn't change. If I try to reimport those photos I get an error "Unreadable files" "The following files could not be imported"
This type of thing has also happened before. I have a directory of pictures in the iPhoto Library directory, but they are nowhere to be found while browing the library.
Any help is appreciated..
Thanks

This sounds like a corrupted database file. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library Folder allowing it to overwrite the damaged file. If not, then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Mail messages missing after copying to new folder

I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
Also If I try to export the mailbox, not all of the mail message are exported.
It seems very difficult to find out what is causing the problem.
I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

I am recovering some email messages and have imported the mbox into a new folder. It contains 8860 messages.
When I copy these messages to the inbox, about 750 messages do not copy over. There is no warning that the file copy is incomplete.
Also If I try to export the mailbox, not all of the mail message are exported.
It seems very difficult to find out what is causing the problem.
I had already rebuilt the mailbox before attempting to copy it to the inbox folder.
Anyone have any experience with mail messages going missing files after copying them to a new folder within mail?

Video footage I've imported from iMovie to Premiere cs6 is missing after the import! please help!

I initially imported raw video footage from an event that I shot into iMovie 11, but later decided to try an edit the footage in Adobe Premiere CS6. I successfully imported the iMovie file folder into CS6, then saved and exited the program to work on it after lunch. When I returned and reopened the file, the footage could not be found. I attempted to reopen it in iMovie and it came up as a missing file also. I know it successfully opened in Premiere because I've seen the footage. I didn't trash anything so it's not in the trash. Where did my footage go, and how can I retrieve it?

Hi Ann, Hi JSW,
I looked around a bit and noticed that this same problem sometimes happens in iMovie itself. People lose their media because it gets copied inside the project file itself. If you right click to see the package contents, you might be able to locate the media and copy it to a dedicated folder, then reconnect media to it in Premiere Pro. See this post on the apple website: Source clip missing | Apple Support Communities
Thanks,
Kevin

Messages missing after phone replaced in iPhone 5 + iOS 7

Hi,
I recently got my iPhone 5 replaced from the service center. After that I am not able to access my older messages. When I checked the icloud drive, I can see that a new device has been created for my fresh piece. I have used the newer device for sometime now, so, there is data on this also. I think "Restore and Reset Data" might help me get the data from my older phone?
All I need are the messages from my older phone that is on the icloud backup. Can anyone please help?
Thanks,
Arka.

Hey arkafrommumbai,
Thanks for the question. It sounds like you have received a new replacement iPhone and would like to restore it with the backup of your previous device. The following resource should assist you in doing so (simply skip to the “Set up your new device” section and proceed):
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/ht2109
Thanks,
Matt M.

In Message tab message missing while importing wsdl

My scenario is a file to webservice to Idoc scenario.
1.We first send a request file to XI to start the BPM receive step.
2.the request message goes to a webservice and fetches a response structure and
3.The response structure maps to idoc and finally posts to R/3.
The java team has made the webservice and sent it to me but when I import it as a External definition I donu2019t get any message in the message tab.
So please suggest what I can do in this scenario.

<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://bean.getinvoiceinformation.ewscservices.ewsc.nesas.nissan.com" xmlns:impl="http://bean.getinvoiceinformation.ewscservices.ewsc.nesas.nissan.com" xmlns:intf="http://bean.getinvoiceinformation.ewscservices.ewsc.nesas.nissan.com" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsi="http://ws-i.org/profiles/basic/1.1/xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema targetNamespace="http://bean.getinvoiceinformation.ewscservices.ewsc.nesas.nissan.com" xmlns="http://www.w3.org/2001/XMLSchema">
   <element name="generateInvoiceInformationResponse">
    <complexType>
     <sequence>
      <element name="generateInvoiceInformationReturn" nillable="true" type="xsd:string"/>
     </sequence>
    </complexType>
   </element>
   <element name="generateInvoiceInformation">
    <complexType>
     <sequence>
      <element name="fromDate" nillable="true" type="xsd:string"/>
      <element name="toDate" nillable="true" type="xsd:string"/>
      <element name="countryCode" nillable="true" type="xsd:string"/>
      <element name="specType" nillable="true" type="xsd:string"/>
     </sequence>
    </complexType>
   </element>
</schema>
</wsdl:types>
   <wsdl:message name="generateInvoiceInformationResponse">
     <wsdl:part element="impl:generateInvoiceInformationResponse" name="parameters"/>
</wsdl:message>
   <wsdl:message name="generateInvoiceInformationRequest">
     <wsdl:part element="impl:generateInvoiceInformation" name="parameters"/>
</wsdl:message>
   <wsdl:portType name="GetInvoiceInformation">
     <wsdl:operation name="generateInvoiceInformation">
       <wsdl:input message="impl:generateInvoiceInformationRequest" name="generateInvoiceInformationRequest"/>
       <wsdl:output message="impl:generateInvoiceInformationResponse" name="generateInvoiceInformationResponse"/>
    </wsdl:operation>
</wsdl:portType>
   <wsdl:binding name="GetInvoiceInformationSoapBinding" type="impl:GetInvoiceInformation">
     <wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
     <wsdl:operation name="generateInvoiceInformation">
       <wsdlsoap:operation soapAction=""/>
       <wsdl:input name="generateInvoiceInformationRequest">
         <wsdlsoap:body use="literal"/>
      </wsdl:input>
       <wsdl:output name="generateInvoiceInformationResponse">
         <wsdlsoap:body use="literal"/>
      </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
   <wsdl:service name="GetInvoiceInformationService">
     <wsdl:port binding="impl:GetInvoiceInformationSoapBinding" name="GetInvoiceInformation">
       <wsdlsoap:address location="http://localhost:9083/EWSCWsAppQA/services/GetInvoiceInformation"/>
    </wsdl:port>
</wsdl:service>
</wsdl:definitions>

Text messages and phone calls from March 2012 to date are missing after activating iphone5

text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

All clips missing after import from camcorder!

All clips are missing after import from camcorder - Canon ZR20. For some tapes all clips are there, for others there are none. All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
Any suggestions?

Ok - this is frustrating. I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started... After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting. Now after restarting FCPX a couple of times all of a sudden the clips are all coming in! Strange! Guess I'm OK now.

Pics missing after import

I was importing pictures from my camera to iPhoto, the import finished....the pics were erased from my camera. Then iPhoto quit unexpectedly. When I go back into iPhoto my pictures that were just imported were no where to be found. Sad sad story.....can anyone think of a way to find them.....are they placed in any other location???
Thanks for the help

Katie:
Welcome to the Apple Discussions. Open the iPhoto Library package and see if there's a folder in there titled "Import" or "Importing". If there is look in side and see if there are any files in it. If so move to the desktop, launch iPhoto and import the contents of that photo. If those are your missing file you're done.
If not you may have to get a 3rd party file recovery application like MediaRECOVER to recover the deleted files from the camera's memory card. If your camera does not mount on the desktop you'll need to get a card reader. IMO using a card reader and not having iPhoto delete after import is the best way to go. I always let the camera reformat the memory card after uploading.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

DBMS_CRYPTO grant missing after a full import, is this expected?

Folks,
We just did a full export of a production database using expdp.
$ expdp directory=DATA_PUMP_DIR dumpfile=Full.dmp logfile=Full.log metrics=Y full=Y
We then did an import on another system using impdp.
$ impdp directory=DATA_PUMP_DIR dumpfile=Full.dmp
Both DBs are 11gR2. 11.2.0.1 on the source system, 11.2.0.3 on the target system.
While testing one of our applications we noticed that a couple of functions didn't compile for one of our applications. Those functions referenced DBMS_CRYPTO.
Further testing revealed that our main application user was missing grant execute privs on DBMS_CRYPTO. After granting execute on DBMS_CRYPTO to the application user, everything worked fine.
All other grants (and there are a lot of them) came across just fine (as far as we can tell so far).
Is there a reason why a grant on DBMS_CRYPTO would get 'missed' during an import?
Thanks,
Rich

For schema level import, there could be some privileges missing, check:
Missing Object Level Grants After Data Pump Schema Level Import [ID 795784.1]
But your case, full import. Can you generate sqlfile with only grants and check whether that privilege is there in dump file:
impdp full=y dumpfile=Full.dmp INCLUDE=GRANT directory=DATA_PUMP_DIR

DI custom SQLs were missing after importing a good ATL file

The customer had a strange issue recently - lots of custom SQL statements were missing when they imported a good ATL file into a brand new repository. This hasn't happened before. And they are sure that the DI repository versions are the same between the one it was exported and imported. I did some troubleshooting for them and found out:
1) The custom SQLs are intact when I opened the ATL file in a text editor. And the ATL file can be imported without any issue into other repositories.
2) Most custom SQLs are missing but not all. Some are imported OK.
3) When I opened the SQL tranform for those with missing SQLs, the textbox area for the SQL statement was blank. This caused errors in validating the job.
4) Sometimes the issue was resolved when the developer re-initialized the repository and imported the ATL again. But sometimes this strategy doesn't work - the SQL statements are still missing after the repository has been re-initialized a couple of times.
The DI version is 11.5.3 on HPUX with repository version 11.5.1.5. The repository database is either Oracle 9i or 10g.
Thanks,
Larry

The issue was resolved. The error occurred because of the database version mismatching. When the job was exported from the dev repository, datastores were excluded. The datastores in dev point to Oracle 9i sources. However, when datastores were recreated in test, some of them point to Oracle 10g sources (same database structure, just version upgrade). Therefore, when the job was exported from the test, although the datastores were still excluded, the version number "10g" were embeded in the SQL transform. This caused the SQL text to be excluded when importing ATL into the dev repository.
The action taken is to 1) delete datastores with version 10g; 2) create one with version 9i; 3) then exported the job into a new ATL. The new ATL can be imported into the dev repository without any issue.
Thanks,
Larry

This message always appears: [JavaScript Application] "Error: missing } after function body" Please, i need help with this.

A window appears with this message : [JavaScript Applicaction] Error: missing } after function body.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Additional folder "Messages" after mail import

Hi, I imported the mail from an old system (10.6) into a 10.8 system via "Import Mailboxes ..." in Mail.app.
I choose "Apple Mail" in the "Import data from:" window and selected the main directory where all the mailboxes and their messages sat.
After a couple of hours, after importing, the structure seemed to be replicated on the newer system,
except that every mail folder containing messages also contains a folder "Messages" showing exactly the same messages
as in the folder above.
Since that's many thousands of messages in hundreds of folders deleting the respective Messages-folder is not feasible.
How can I solve this?
Thanks, Michael.

Intermediate answer: The app launched correctly and the import process has started.
It is taking ages though. Over 3 hours for around 30K messages.
The message count sometimes gets stuck for 20-30 minutes or so and then starts counting again...
There are ~5K messages left to be imported. I'll let you know if it goes ok.
Stay tuned for the next and hopefully last episode.
Cheers,
ZChef

Photos missing from project after initial import

I'm having an issue where after initial importing pictures into Aperture, I can no longer find them within the project. Initially I can see them fine after the import, but when I relaunch Aperture, they are gone. The project itself exists and I when I move the cursor over the project icon, I can see the images (and they also appear in project info), but when I click on the project, it has no photos inside it. I have checked and it appears all filters are turned off from the browser view.
Also, when I try to re-import the photos, Aperture identifies them as duplicates.
I did have an issue a month ago where Aperture crashed a few times while trying to import. I repaired permissions and the database, but am still getting a warning to repair the database each time I open Aperture. I have not yet run rebuild, as I am concerned about this messing up the library (I am current on my backups).
Any suggestions would be appreciated.

I did have an issue a month ago where Aperture crashed a few times while trying to import. I repaired permissions and the database, but am still getting a warning to repair the database each time I open Aperture. I have not yet run rebuild, as I am concerned about this messing up the library (I am current on my backups).
Independent of Tony's suggested fix, it looks like you are having a more general problem. We need to know more to see, what might be causing this. What version of Aperture are you using? What is your MacOS X version?
It would be good to know, if your frequent "repair" problem only occurs for your current Aperture library. Create a new, empty Aperture library and import a few test images.
Do you have the same problem with a new library?
If not, where is your Aperture library stored? In the default location in "Pictures" or on an external drive? Are you sharing your library with other user accounts? How much free disk space do you have?

Messages missing after WSDL import

Similar Messages

Maybe you are looking for