Messages Missing in sxmb_moni

Hi every one,
There are some messages missing in sxmb_moni? I have checked the queues: smq1, smq2
-Naveen.

Hi,
did you activate the trace?
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
BTw
are you sure those messages should be in the XI?
do you see your message in:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
Regards,
michal

Similar Messages

Outbound Message Missing from SXMB_MONI IN ECC

Dear PI Experts,
I have created IDOC to File scenario, But I am facing error when i am sending data from idoc using tcode we19 .
ERROR is whenever
I have checked tcode SXMB_MONI IN ECC server but XML message is not showing in this tcode ,whereas XML message is showing in tcode SXMB_MONI of PI server .
Please help me .

Hello Diptee ,
I have checked both case of IDOC and screenshots are referenced .
Case 1 .
Tcode BD10 ,
Case 2 .
Tcode WE19,

Missing message mapping in SXMB_MONI

Hi All,
I am doing a mapping from XI to 2 receivers CRM proxy and JMS adapter.
When I executed the whole process, I can see success flags in both XI MONI with 2 nodes one for receiver grouping and other for response. The request message mapping node is missing. When i checked CRM MONI for the same message, the inbound message payload is blank. What could be the reason for the missing message mapping IN sxmb_moni.
Thanks

Hi,
Are you copying the source xml from message test tab to trigger the scenario.
If so you need to remove <messages> <message> node from the input type.
Always the root of your input xml should be your message type name.
Regards,
P.Venkat

Reciever Interface missing in SXMB_MONI

Hi,
When an XML message is generated in my backend ECC 6.0 system, SXMB_MONI does not show any entry in the Reciever Interface coloumn.
Hence the message will never go to the PI server.
SLD & SM59 connections are working fine.
Could we be missing out on something?
Thanks a lot,
Saba.

Hi Saba
Check with Michel's Blog I cannot see some of my messages in the SXMB_MONI
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
also Check ur SMQ1 & SMQ2 Transactions.
Suppose if any queues are struck the messages are not coming to Receciver side,.
Check ur XI system & Receiver system
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 14, 2009 8:23 AM

Error message: Missing PDF maker files in Word 2007

OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
Thanks in advance!
Alycia

for Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

I keep getting the error message "Missing PDFMaker files Do you want to run the installer in repair mode"when I try to convert a file into a pdf. I have tried uninstalling then reinstalling but I continue to get the message. I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

Hey Suzanne,
Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
Have you tried using Print to PDF option from the File menu for the same?
Please check and then let me know.
Regards,
Anubha

I get a message missing plug-in when on safari

I get message missing plug-n when using saffari

Adobe Flash Player and Flip4Mac also add playable extensions should the content be flash or wmv. I recommend you also download "Click to Flash" which is a Safari extension that allows you to click flash content to view (thus saving your precious battery juice).
As for RoddyM's PDF's, check this post to see if it's of any help: https://discussions.apple.com/thread/2454737?start=15&tstart=0

My mail won't load via iCloud on my desktop. It comes up with the message "Missing resources". How do I correct this?

My mail won't load via iCloudonmy desktop. It comes up with the message "Missing resources". My network is working properly and I've checked Apple's reporting system to see if any systems are down (they are not). I am asked to submit the report to Apple (which I have)...but how do I correct this error sothat I can access my mail via iCloud on my desktop iMac?

Here is the error message information: DOES THIS HELP ANYONE FIGURE OUT WHAT IS HAPPENING? All other iCloud Services work.
IS FATAL
true
APPLICATION NAME
mail
TITLE
Mail could not be loaded
MESSAGE
There was a problem loading the application due to a possible network error or missing resources. Please try again.
LOG
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError
TYPE
server
APP STATECHART
SC.Statechart:sc1031
initialized: true
name: cloudos-statechart
current-states: [
    active.application.displayingCurrentApp
state-transition:
    active: false
    suspended: false
handling-event: false
BUILD NUMBER
15B.169e9f7
TIME
Tue Mar 17 2015 11:35:32 GMT-0400 (EDT)        (1426606532298)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
DSID
1018646875
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: MAIL in main()
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.User object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: Creating local CK.AccountPreferences object
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc1473:dispatch('load content')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: SC.Object:sc2647:dispatch('noContent')
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG:     -> entering "6.2.2 No Content"
Tue, 17 Mar 2015 15:35:30 GMT: WARN: REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
Status:0
Request:/wm/preference
Wmsid:null
Redirect Count:1
Timeout Redirect Count:1
ResponseText:
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: --> Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875, headers: Content-Type=text/plain, body: (omitted)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
wmsid: null
params: {"locale":"en-us","timeZone":"US/Eastern"}
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
responseText: ,
this._redirectCount: 1
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <-- Response 2: 0 (84ms), headers:   body: (empty)
Tue, 17 Mar 2015 15:35:30 GMT: DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: retrieveResponseError:
ServerPreferencesDataSource.retrieveResponse
error:-1/0
guid:serverPrefsGuid
Tue, 17 Mar 2015 15:35:30 GMT: ERROR: Bootstrap error: Preferences.RefreshError

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

I get the error message "Missing PDFMaker files" when trying to convert a microsoft word document(.docx)

When I right click the word file and select Convert to Adobe PDF, I get the error message "Missing PDFMaker files".
Im using Windows Vista Home Premium, Service Pack 2, 32 bit operating system.
Im using Microsoft Office Home and Student 2010
I have Adobe Reader X installed
Thanks

Hi RhodaMcP,
You might want to check the KB: http://helpx.adobe.com/acrobat/kb/troubleshoot-acrobat-pdfmaker-problems-office.html
Regards,
Rave

Issue with Archiving & Deletion of messages in PI ,SXMB_MONI messages

Hello experts
I am working on Archiving & Deletion of messages in PI ,SXMB_MONI, i have fallowed all the steps which are avialable in /people/deepak.shah/blog/2010/04/22/archiving-deletion-of-messages-in-pi--part-2, but the messages still there in SXMB_MONI.
please help me to resolve this issue.
regards
chandra

Hi Krish
i have fallowed steps like....
in SXMB_ADM
>>>step 1: Define the interface for archivng and retnetion period
>>>step2):Schedule Archive Jobs,
after this i have checked the in SM37 the jobs got sheduled and released after that it showing finished.
>>>step3):ARV_BC_XMB_WRP<date> (archiving, step 1)
ARV_BC_XMB_DEL<date> (archiving, step 2)
here i am getting message like "0 XML messages got archived".
"0 XML message for deleated".
I have doubt in SXMBPMAST table here when i check the status of interface , ITFACTION field is containing the value INIT and if I understood correctly it job deletes only those messages where ITFACTION is set to DEL.
We are actually trying to delete the messages avoiding archiving but what I am seeing is we cannot delete error messages and for them we must have to go through archiving. Please correct me if I am wrong.
Thanks
Chandra

Group Tree: Error in Ajax response - message: missing } in XML expression

Hi,
We were using a previous version of Crystal libs and viewer. I wanted to get up to date with the latest jars and viewer so I downloaded and installed the version with Eclipse 3.4.1 and crystal development bundled together.
I've copied the new jars from there into my existing project. I've also copied the folder cyrstalreportviewers into the project. We're using Tomcat 6.
I've now got a problem with the Group Tree at the moment since I started using the latest libraries and crystal report viewers.
My web.xml looks like this.
        <context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>/crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>webapp</param-value>
     </context-param>
        <servlet id="CrystalReportViewerServlet">
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <display-name>CrystalReportViewerServlet</display-name>
          <servlet-class>
               web.servlet.ReportingViewerServlet
          </servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
       <servlet-mapping id="CrystalReportViewerServletMapping">
          <servlet-name>CrystalReportViewerServlet</servlet-name>
          <url-pattern>/CrystalReportViewerHandler</url-pattern>
     </servlet-mapping>
A request to the uri https://......../WebApp/CrystalReportViewerHandler?id=3
The servlet doesn't do anything that seems to be uncommon. I can post more precisely what it does if needed.
The report will load correctly, I don't get an error page asking if my crystalreportviewers/ path is accessable to the server.
I get a parameter page asking for a value. I enter that and click OK.
The viewer sends a POST request to my Servlet and is handled correctly.
The report is then loaded.
On the click of an item in the Group Tree it sends an Ajax POST request and I then get the following error:
message: missing } in XML expression
fileName: https://localhost:8080/WebApp/crystalreportviewers/allInOne.js
lineNumber: 10
stack: ()@:0
eval("(\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n)")@:0
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Object],[object Object],[object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:12
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
()@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object XMLHttpRequest])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Object],[object Event])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
([object Event])@https://localhost:8080/WebApp/crystalreportviewers/allInOne.js:10
name: SyntaxError
Clicking on the Groups headers on the right hand pane work as expected. Although I notice they are not Ajax requests.
I've spent a few days at this now and I feel like I'm running out of options but to revert back to the previous version we were using. I presume this works elsewhere so I've got to be doing something incorrectly with my setup.
If anyone needs more info then please ask.
Thanks,
Patrick

Hi Ted,
Thanks for your reply.
That's our own Servlet. It extends javax.servlet.http.HttpServlet
doGet does the following stuff:
Creates a ReportClientDocument.
Sets the ReportAppServer to "inproc:jrc".
Opens the report as read only.
Gets the DBController and calls logon on it.
Then calls replaceConnection.
Adds some discrete param values.
Creates a CrystalReportViewer.
gets the report source from the report client document.
sets the report source on the crystal report viewer.
set own page to true.
sets the report source in the session.
The crystal Report Viewer then processes the Http Request.
doPost:
gets the report source from the session.
creates a CrystalReportViewer.
sets the report source on the crystal report viewer.
set own page to true.
The crystal Report Viewer then processes the Http Request.
One thing I changed in there was the way the data source was changed. It used to loop through tables.
Tables tables = clientDoc.getDatabaseController().getDatabase().getTables();
newTable.setQualifiedName(qualifiedName);
clientDoc.getDatabaseController().setTableLocation(origTable, newTable);
Now it does this:
DatabaseController dbController = clientDoc.getDatabaseController();
dbController.logon(username, password);
dbController.replaceConnection(new ConnectionInfo(), connectionInfo, null, DBOptions._useDefault);
If you need more info please do let me know. Thanks for your help.
Patrick

MAPPING GENERIC (Split mapping created no messages) error is sxmb_moni

Hello,
We are having thousands of messages failing in sxmb_moni due to MAPPING GENERIC error. It also states that <i>Split mapping created no messages</i>. Where will I start my investiagtion? I already checked both ID and IR but I could hardly determine what causes this error.
Here is a part of the error message from the trace:
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Object-Id:6FB317EF58B136D6BEAB6E567934CC40</Trace>
<Trace level="1" type="T">Mapping-SWCV:A872F380930B11DAAB6EF47891374079</Trace>
<Trace level="1" type="T">Mapping-Step:1</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_ completed. (executeStep() of com.sap.xi.tf._GBO_MaterialMaster_StandardBusinessDocument_TO_LOCAL_Governor_</Trace>
<Trace level="3" type="T">Message Type 1 Number of Messages 0</Trace>
<Trace level="3" type="T">Message Type 2 Number of Messages 0</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
Thanks in advance!

<Trace level="3" type="T">Using existing</Trace>
<Trace level="3" type="T">Executing Query: SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30</Trace>
<Trace level="1" type="T">SELECT TO_VALUE FROM ICC_MAPPING_VIEW WHERE FROM_CODING = SIRIUS AND TO_CODING = GS1 AND OBJECT = TRADE-ITEM-TYPE AND FROM_VALUE = 30 successfully returned: E-HPC_PRODUCTS</Trace>
<Trace level="1" type="T">ret: :E-HPC_PRODUCTS</Trace>
<Trace level="2" type="T">noReceiverFound</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
You have used the Trace object to write some Trace in your User Defined Functions. Does this trace make sense in terms of your mapping logic to you?
Did you remove the <messages> tag from your source message?
Also, If you are using multimapping make sure that the mapping creates all the messages in the Target Side and that the Inbound adapter is neither Idoc nor HTTP.
Regards
Bhavesh

Message scheduled in SXMB_MONI(Queue status is stoped)

Hi experts,
Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(this is not in XI). scheduled messages are not at all executing.. here i registered all queues.
Please give me the solution how to reprocess the messages.
thanks
Srinivas

hi ,
1) Here i am selected message processing mode EOIO. which one is good EO or EOIO for process the messages asynchronously. If i choose EOIO I have to give queue name right? What name i have to give?
It depends on the requirement.
if your messages are related with the one another . means 2nd message will only process when 1st one is successfull.
Then use EOIO.
and no dependency is there then use EO.
Naming convention is given is SAP library for sapxi.
For EOIO use like :- XBQO*
For EO use like :- XBTO*
2) how to process again this messsages in receiver system. (I am doing using SMQ2 but this metthod is not for production system).
Now if duplicate entries are there then delete all those messages first. and if it is going in Database then Delete the wrong and duplicate entries in the Tabel first.
Then restart the right messages. Goto SXMB_MONI then delete the duplicate messages.
Regards,
Sumit Gupta
Edited by: sumit gupta on Nov 12, 2009 1:30 PM
Edited by: sumit gupta on Nov 12, 2009 1:31 PM

Messages Missing in sxmb_moni

Similar Messages

Maybe you are looking for