Messages not appearing in SXMB_MONI

Hi All
I am working on SOAP Sender and RFC Receiver scenorio.
I did all the configurations in the XI and tested the same using Altova XML Spy tool.
It is working fine and the data is also getting posted in SAP.
But i am not able to see the processed XML messages using SXMB_MONI.
Can you pls help on this
Regards
Madhan D

Hi,
Goto SXMB_ADMIN->Integration engine configuration-Specific parameters and select RUNTIME-->logging_sync to 1 by default it is 0.
Thanks!

Similar Messages

ChaRM - Message not appearing in CRM Web Client

Hi
My company is using ChaRM and have ZMCR setup for Change Requests. Due to audit reasons, the requester and approver in ZMCR cannot be the same person.
I have gone into SE91 and access message class SOCM_ACTION_LOG. Here, I have created my new message.
I have then gone into SPRO and setup all the necessary configuration.
And it works perfectly!!!! EXCEPT.....the error message doesn't show in CRM Web Client UI. So the functionality is working fine but obviously we need the message to appear so users no why the change request hasn't changed status.
Firstly, here is my config in SPRO:
And this is what's showing in CRM Web Client:
I have read online that function module CRM_MESSAGE_COLLECT is used to show messages in CRM Web Client. I am not an ABAPer. How does this function module work? What do I do with it? Or is there something else I need to do for this message to show?
Pretty sure my config is spot on so just need some advice on how to get the message to show.
Thanks very much!!!!!!!
Shaun

Hi Shaun,
Did you register your custom messages in the SPRO settings? You need to use Appl. Area SOCM_ACTION_LOG and make an entry in the below tanble for Single Messages;
Regards,
Vivek

RFC to File scenario.. Messages not available in sxmb_moni

Hi Experts,
I have created simple RFC to File scenario in my sandbox system. First time I am doing this type of scenario.
When I execute the program which is created to call the RFC Function Module nothing is coming into sxmb_moni in sap system as well as in PI system. I don't know why messages is not coming to sxmb_moni.
Please suggest me how to resolve this issue.
Thanks & Regards,
Satish Kumar P.

Hi Satish,
first monitor Sender RFC channel in communciation channel monitroing ,after executing program in ECC if BAPI triggered then definely you will see log in RFC sender channel.
if nothing was found then prob in ECC side like Pogram triggered BAPI.
Regards,
Raj

Message not seen in SXMB_MONI

Hello Experts,
We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
When Material is sent using transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
But the corresponding message is not visible in SXMB_MONI of PI.
Please help!
Thanks in advance,
Suraj

Hello Prateek,
Yes it is showing stuck in SM58 with status '::000'
If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
We cannot understand what this status means or how to resolve it.
Please help!
Regards,
Suraj

Error code message not appearing

Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi ‏12 KB

Hi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi ‏13 KB

Why are some inbox messages not appearing in Mail on multiple macs and other devices?

My partner and I have an iMac at home and one at work. We also have two iPhones and two iPads. We only have a couple email accounts each and two for work set up on all six Mail applications. For some reason inbox messages are not appearing consistantly on all six devices. For example, I can have a new message from my Mom, see it at home and on my iPhone, but not on the iMac at work.
Also, some messages I'd like deleted off my work iMac since they're personal, but I'd like them kept on my home iMac and iPhone. Is this possible? Is it possible to delete a message on one and have it deleted on all others?
Message was edited by: witboy

What type of email accounts are they? IMAP or POP.
IMAP leaves messages on the server so you can get them from everywhere.
With POP, messages are downloaded to your client and then removed from the server, depending on your settings.
The iDevice setup for POP doesn't remove them from the server.
I think Mail's default setup for POP is to remove immediately.
If they are POP accounts, you can set Mail's preferences to leave messages on the server for a period of time so that you can retrieve them on multiple clients.

Raised Messages Not Appearing In ByDesign

Hello everyone,
Simple question --- I have a message on a custom BO I want to appear in ByDesign should a script successfully run. The message appears with the correct values in the debugger if I have it open, but nothing comes up along the bottom of the screen in ByDesign, whether the debugger's open or not.
I was under the impression that all I had to do was write:
raise MessageName.Create("S", <parameter list>);
And it would appear, but apparently not. The screen in question is the file input screen: I want a message to appear should the file input successfully trigger and run an AfterModify script to completion. Any ideas? Thanks!
Lewis

Hi Frederick,
In order to be able to display synchronous messages in SXI_MONITOR you have to set the following
parameter in SXMB_ADM.
Go to SXMB_ADM --> Integration Engine Configuration. Click on 'specific Configuration'.
Add the following parameter:
Category: RUNTIME
Parameter: LOGGING_SYNC
Value: 1.
Hope this helps you.
Carlos

Call Message Not Appearing

Hello!
I was using Skype for a few months, but about a week ago, I noticed a problem. When my friend calles me, I the call message (the blue one at the top right corner) does not appear. When he writes to me, however, everything's fine, and the message appears. I don't know what's the problem, I haven't changed any settings. I'm using Windows 8, and I have Skype from the Windows Store. Please help me.

Having same problem.
While I'm on Audio call, I can send IMs to anyone except the person(s) I'm on call with. If I go to recent chats, when I click on another person I get the chat screen with some previous messages, but when I click the person I'm on call with, I get connection pane, with his profile pic all over the screen.
If that person sends me an IM, then the message appears in blue bubble, and disappears after a while, but I can't see previous messages.

Messages not appearing on mac with mountain lion.

I downloaded ML and have an iphone 4 with up to date OS software. Is there a reason that my messages are not appearing on both? I have enabled messages on both devices, but nothing is transferring over. In fact I think that some imessages are not coming through to my cell phone at all.

You have to set this up a certain way to work.
On your Messages program on your macbook, make sure the account is using the same account as on your iPhone. On your iPhone, go into Messages settings, and make sure you are using your email address (the one from your account) as your caller ID. When you begin an iMessage conversation with someone, it will show up in both.

Group text messages not appearing in messages

I am receiving all one to one text messages on my iPhone and Macbook, but group strings are not appearing on my macbook pro. Am I missing something? I've deleted existing threads from phone, power cycled, and still no joy.

Hi,
I too have the same annoying issue. I have to continuously take out the battery and restart my Q10 in order for my text messages, facebook, and email notifications to come in. This is my second Q10 now as the first one started freezing when I tried sending emails so I thought the Hub problem was related to a faulty phone but now that I have my second one, the same problems are happening (except for the freezing of the phone). It is incredibly frustrating that a phone in this price range has such a basic fault when the main purpose of a mobile phone is to receive phone calls, text messages, and emails!!
I have also found that I have multiple contact details for the same person and that if I try to call someone's mobile that begins with 04 (Australian mobiles) I get told I can't call that number, but if I call a mobile with +61 (Australian country code) I get through to them! The phone also wont save contact details of people who only have a landlines number.
I have been with Blackberry for 6 years now and this is my 4th BB phone. I have always been a staunch advocate of the Blackberry until now. These software issues should not be happening in a high end phone.
Blackberry, please create a fix for these basic issues as soon as possible.
I have a Blackberry Q10; OS version 10.1.0.1910; Build 517312; and Software Update 10.1.0.314
Many thanks

Callback message not appearing on Siemens Hicom connected phones

We have connected two Siemens Hicom 350 PABXs using E1 controllers on two routers. The routers are connected via an IP (over ATM) link. Siemens digital phones are connected to each PABX. Calls are going across smoothly, however, when callback feature is initiated from a phone on one PABX to a phone on the other PABX, the initiating phone shows the message "Not possible" although the callback is actually set and does call back. The message should show as "Will call back".

Ok, the situation now is pretty bright. I think you should have noticed the error in the second debug output. The Cisco has hard time in parsing/decoding the ISDN Q.931 packet and therefore shot an error message.
Could you provide me with the IOS versions of the gateways, or even better - the H323 versions they are running.
For the time being, I would recommend to you to issue the global command "isdn gateway-max-internetworking". With this command the Cisco gateways will try to do their best to pass transparently the unknown ISDN packets without trying to decode them. Let me know if that works.
After checking the H323 version, compiled into your gateway's IOSes, you should see if they are running H323 version 2,3, or 4. AFAIK, 12.3 IOSes are running H323 version 4, which has the ability to "tunnel" QSIG messages over the IP.

Syslog Messages Not Appearing

Hi, I'm hoping someone can help me get my syslog messages to appear when I'm logged into the switch via SSH on a Cisco 4510R Switch. The ones that appear when I shutdown/no shutdown interfaces, leave global config mode, all the basic messages I'm used to seeing when logged in via console, telnet, or ssh.
The show run command displays logging console critical, which is the default of (2) I believe.
In global config, I set logging monitor 2, and also tried both console and monitor at level 5. Nothing is showing up.
Show logging displays all the latest messages, but I'm used to these showing up as things are configured.
This is the way the switch was set up prior to my working here.
Does anyone have any idea why this, and how I can get it working?
Thanks.

According to your configuration guide the default is debugging ie. level 7 so I suspect this has been changed.
In regards to your question if you are logged in via a vty line then you need to change the monitor level but then you may also need to type -
"terminal monitor" or "term mon" for short.
if you want turn it off -
"terminal no monitor"
Jon

Messages Not Visible in SXMB_MONI

Dear All,
Now i am doing one file to file scenerio. The file is getting deleted from the source directory but not reaching the target directory. Also, when i am seeing in SXMB_MONI, there is no messages in that. And in the Adapter Monitoring, Source Adapter(File) is specifying that one message is processed but Target Adapter(File) is telling that "no message processing until now".
Please help me to solve this problem.
thanks in advance.
nishu

Hi Nishu,
Go to Runtime Work Bench(RWB) and select Message Monitoring. There select your message by specifying the appropriate date.
Click on the message details to get a detailed view of what happened to your message.
Send us the msg details for more help.
Regards,
Jai Shankar.

Sent messages not appearing on iPad...

Why won't my sent email messages appear on my iPad, or in Mail on my MacBook appear even though they have been sent and received?
(The mail account is configured correctly and this function works on my MacBook AND iPhone but never on my iPad)

I'm still having this issue with 2 different IMAP based web mail accounts...
They both send and receive messages just fine, however on my iPad and iPhone the Sent Messages are never saved, yet on my MacBook Pro and Mac Pro they do. The web ail accounts are set up with the EXACT same settings so I'm not sure why my devices won't save my Sent Messages.
Any suggestions?

Mail & Exchange - Sent Messages not appearing in Sent mailbox

Once setting up an Exchange account in Mail everything seems to be working fine except that when I send any emails they don't appear in the "Sent" folder. When I log in under webmail they do appear. Anyone else find a solution to this problem?
Thanks for any help.
K

I'm having my own share of problems with Mail 4.2 and Exchange Server 2007. See this post.
In addition to the Junk mail problem, I'm experiencing overall sluggishness. Mail takes longer than it should to quit, and sometimes I get the spinning pizza Loading… icon on simple text messages. I wish I could go back to re-configuring my Mail account to be POP instead of the auto discovery Exchange method.
As to the Sent mail problem, I am not experiencing that issue. I don't know if this will help, but go to your Exchange account configuration in Mail, click Mailbox Behaviors, and under Sent check "Store sent messages on the server" and for "Delete sent messages when:" choose Never.
My Sent messages all show up in my Sent folder in Mail, but they take a second. From what I can gather, these messages are sent to the Exchange Server first, and then downloaded by Mail. An unnecessary step, I feel, but I guess that's the way Exchange Servers work.

Messages not appearing in SXMB_MONI

Similar Messages

Maybe you are looking for