Messages not available in XI after Restart

Hi experts
I have one query we have a scenario where in source side we are using JDBC Adapter. JDBC polls and performs Select query and after that performs update query. But in between we have restarted the complete XI box. In source side we can see the status that messages are send to XI but in XI we can't see any messges in Adapter as well as in Integration Engine
What could be the reason??? no messages are available in SXMB_MONI and RWB
Where else can I see the messages stuck in ADAPTER Engine. I have checked the queues SMQ1 and SMQ2 both are cleared.
Regards
Abhishek Mahajan

Hi Abhishek,
Synchronous messages are not persisted on the Integration server unless logging is switched on in SXMB_ADM Tcode(Specific Configuration->RUNTIME(Category)->LOGGING_SYNC(Parameters)).
That's the reason you couldn't find SYNCHRONOUS message in SXMB_MONI.
Check this blog by Michal.
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
Also one simple check....in the selection screen of the sxmb_moni check for the date/time range.
Incase the receiver side you are using RFC then,
In your RFC destination on the R/3 Side use the user "PIAPPLUSER" instead of "PIRWBUSER" in the "LOGON_SECURITY" tab.
Regards,
Divya

Similar Messages

WE20 use&E0336 EDI: Partner profile outbound logical message not available

Hi
When I am creating the vendor master, after selecting payment advise by EDI tick under APP Transactions i am issued a warning message as Account XXX has not yet been agreed as being EDI partner and its directing me to T.Code WE20. What is the use of this.
I have maintained WE20 for the vendor and after running payment run (F110) with payment method as E (Electronic payments-BACS) payment medium file is getting created. But when i go and see the SP01 in the error log the message is shown as E0336 EDI: Partner profile outbound logical message not available.
Can anybody explain what is the use of WE20 t.code and why i am getting the error message.
Brahma

Hi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian

MSS iView Error "Error in Source. Message not available"

After installing MSS 60.1.5 (System = HP-UX 11.11 ORACLE 9.2.0.5. SAP EP 6.0 ON WEB AS 6.20)
and trying to use the the iViews in the MyBudget workset we are getting the following errors:
Using iView Chritical Variance on My cost centers and assets monitor we are getting the error Error in Source. Message not available.
Using iView Critical Line Items on My Cost Centers we are getting the error An error occurred in the SAP system10 The specified SAP system could not be found null SAP_R3_Financials.
We have made system allias for our system oursystem = SAP_R3_Financials and the user we are using have accesse to the portal as well as the backend system.
When creating normal SAP transaction iViews we have no problem accessing the backend system from the Portal.
Any good ideas will be appriciated.
Kurt

Check out this note 790896.

I want to play an episode from channel seven but keep getting message not available in this region - but it is

GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, Lou

Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane

I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

Business Package for Assets 50.3.1: Error in Source. Message not available

Hi
Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display: "Error in Source. Message not available."
even all other iviews on the same page still work as expected.
has anyone got the similar problem before? please help!!!
many thanks in advance!
Gang

When logged on to R/3, choose the following from the menu:
System > Status...
In screen area "SAP System data" click on the button next to "Component version".
Look for the component named only "PI", and check wether it exixts and what release it is, it should be at least 2003_1_XXX (where XXX represents your R/3 Appl version).
Also, check that you have the component "WP-PI" installed with the release 600_XXX (where XXX corresponds to your SAP Basis release).
I know I needed to check/install these two when I configured the Assets package.
/Christine

Message "not available in the us store"

Why do I keep getting the message "not available in the us store" when I press the update button in the app store past purchases for os x server 2.2.2?

All I am trying to do is access the store, I have not even tried to view anything and I cannot change my view and cannot get into the store?! I am able to view iTunes University material, but as for music, movies, TV shows, app store, books, podcasts or ping, all same message. If I try to sign in, I am receiving an unknown error message...

SIP8961 press messages button and get "Messages not available"

I can go offhook and dial the voicemail pilot number 6599, but pressing the messages button says "Messages not available” in large pop-up (see attached photo) (debug ccsip messages shows no output either). I’m not looking for voice view express to work, just to be able to check messages. Once I fix this is there something under voice register global I need to put for a SIP 8961 for Voice View Express in Unity Express 8.6
If I got to a SCCP 6945 I have no problems checking messages (debug ccsip messages I get output)
CME 9.1/152-4.M3.bin and SIP 8961 9-2-2SR1-9
voice register global
mode cme
source-address 172.83.112.11 port 5060
max-dn 1100
max-pool 420
voicemail 6599
tftp-path flash:
url service http://172.83.112.12/voiceview
no create profile
create profile
apply-config >>>>resets 8961s

Here is a clue from the 8961's phone console log, but no fix for it yet.
8316 NOT 07:12:44.714324 CVM-Focus Base is class cip.comp.ao
8317 NOT 07:12:45.678101 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
8318 NOT 07:12:45.678396 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
8319 NOT 07:12:45.687479 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
8320 NOT 07:12:45.687638 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
8321 NOT 07:12:45.887444 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
8322 NOT 07:12:45.887607 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
8323 NOT 07:12:46.757669 CVM-Focus Base is class cip.comp.ao
8324 NOT 07:12:48.782303 CVM-HTTP JNI| call to ServletContainerClass_requestServlet successful
8325 NOT 07:12:48.786899 CVM-Cannot open the /cisco/logsave directory
8326 NOT 07:12:48.823011 CVM-Select returned
8327 NOT 07:12:52.689269 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
8328 NOT 07:12:52.689430 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
8329 NOT 07:12:52.705499 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
8330 NOT 07:12:52.705799 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
8331 NOT 07:12:53.149971 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
8332 NOT 07:12:53.150174 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
8333 NOT 07:12:54.216764 CVM-Focus Base is class cip.comp.ao
8334 NOT 07:12:54.439134 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
8335 NOT 07:12:54.439297 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
8336 NOT 07:12:54.451505 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
8337 NOT 07:12:54.451668 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
8338 NOT 07:12:54.660857 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
8339 NOT 07:12:54.661022 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao

My bluetooth is with the message, not available. What happened?

My bluetooth is with the message, not available. What happened?

What do you mean you found no information? Was the window blank? Should look like this -

"Servlet pluto is not available" error page after deploying portlet

I want to build a JSF portlet with JSC 2.1. I am playing with the tool a little bit and I am experiencing this error after running the project:
HTTP Status 404 - Servlet pluto is not available
type Status report
message Servlet pluto is not available
description The requested resource (Servlet pluto is not available) is not available.
Sun-Java-System/Application-ServerIt's strange because it happened when I changed something in the code of the SessionBean1.java. Since then, I can't even run properly a blank JSF portlet project that I created afterwards.
I created a new project, added nothing and pressed Run Project. It seems, that the deployment was OK:
portlet-container-deploy:
Adding portlet to portlet container...
Deploying portlet container...
jsCreatorDist:
run-deploy:
In-place deployment at D:\Work\Creator\Portlet3\build\web
Start registering the project's server resources
Finished registering server resources
deployment started : 0%
Deployment of application Portlet3 completed successfully
Enable of Portlet3in target server completed successfully
run-display-browser:
Browsing: http://localhost:29080/pluto/portal/Portlet3
run:
BUILD SUCCESSFUL (total time: 12 seconds)"Servlet pluto is not available" page again...
My configuration: Windows XP SP2, Sun Creator 2.1 with no updates + bundled AS

No, I haven't figured it yet. And it seems that nobody ever had.
JSCreator is buggy. If it weren't for free, I would have never use it. It has so many issues, you will see so many exceptions and experience so many annoyances... And of course, it is very hungry for resources. I am sure that a lot of people will disagree, but that's my opinion. I've been using Eclipse for 4 years now.
However here are some tips (Windows only):
Delete directory .Creator from Documents and Settings.
Uninstall creator, install creator. Don't install it to Program Files, install it to C:\Sun or smth like that, the space character can do some mess.
Again, put your project somewhere, so the path would not contain spaces.
Sometimes just restarting the server helps. I've had to reinstall Creator three times yet.

Message not deleting from Topic after successfully dequeue

Hi All,
Help please..
I need to design a process where message have to produce into a AQ JMS topic and later i have to consume the message from the same topic and publish to a Queue.
In order to move on this i have created a sample My_Topic1 and My_Queue1 with below syntax
Topic:-
EXEC dbms_aqadm.create_queue_table (queue_table=>'MY_Topic1', queue_payload_type=>'sys.aq$_jms_text_message', multiple_consumers=>true );
EXEC dbms_aqadm.create_queue(queue_name=>'MY_Topic1', queue_table=>'MY_Topic1');
EXEC dbms_aqadm.start_queue(queue_name=>'MY_Topic1');
Queue:-
EXEC dbms_aqadm.create_queue_table (queue_table=>'My_Queue1', queue_payload_type=>'sys.aq$_jms_text_message', multiple_consumers=>false);
EXEC dbms_aqadm.create_queue(queue_name=>'My_Queue1', queue_table=>'My_Queue1');
EXEC dbms_aqadm.start_queue(queue_name=>'My_Queue1');
Now i created Foreign server and create local and destination topic of queue.topics name and also created Data source of XAType.
Now my bpel process getting a message(which as one element of sting type) from a web service and i am producing the same message to Topic. Once the message published to topic in a separate composite my JMS Adaptor dequeue/Consume the message from the topic and subscribe it to queue.
The Above scenario working as expected but here what my observation on this
1)When i dequeue message from a topic using bpel process successfully i am able to subscribe the message to queue but the message still remain in the topic i think it suppose to get of the topic once successfully dequeued.
Even i check the subscriber topic table and one subscriber is listening to the topic.
2)If in case any error generated at the time of subscribing to the queue the message should rollback( because i am using XA Transaction) but i think it is not happening as i can see in my topic view aq$my_topic1 MGS_STATE changed to PROCESSED.
Can some one please let me know where i am going wrong.
Thanks in advance.
Regards,
Tarak.
Edited by: Tarak on Sep 9, 2012 8:47 PM

The behavior should be the process consume a message from the topic and will try to do its job. If this process fail, {code]
But in this message not there in topic even it is failed in soa process.....i am very much interested how this XA is working that the reason i am trying all this.What to do with a failed/expired message is usually configurable, but doesn't make sense to place it in the same topic again... If the messages are failing too quickly better to adjust the max_retries and retry_delay...I agress in real senario we will move to error queue. But in that case also some how we need to read the message from queue and publish to the end system.
I am just trying to understand the behavior and what i came to know is after all the retire fails message not going to topictable _E. But when i pass Expire time property or time to live then it is moving to error table.What do you mean? What server was restarted, the database or the soa server? Messages that still didn't reach the max retry number will still be retried...Wheni am bouncing my managed server soa_server1 i can see the invoke activity is trying to publish the message into queue... this is happens after server restart and suppose not to happen....
But thanks alot for the inputs...
Regards,
Tarak.

Whatsapp messages keeps on deleting automatically after restart.

Hi
I am facing a problem recently. When I restart my phone after a long shut down the whatsapp looses its old messages. Everytime the phone is restarted the whatsapp is like new no messages. Searching about it for a while but cant find any solutions. Please help.
Regards
Ankush

That's not normal behavior. Have you tried any of the user troubleshooting steps as outlined in the manual? Restart, reset, restore, restore as new?

Networked computer will not join network automatically after restart/sleep

Situation:
I've got two computers - PowerBook 17" 1,25 GHz, iMac 2,16 GHz 24", both running OS X 10.4.8. They are networked via AirPort Express, firmware v. 6.3, in a WPA protected network. The AirPort distributes ADSL 4 Mbps connection.
Computers are set as DHCP with manual address (to keep stable LAN address)
The problem: While the PowerBook always joins the network after restart/sleep automatically, iMac in such a situation never goes online - the airport status in menu bar is on, the network is checked, but it cannot connect or be reached.
I always have to manually turn airport of from menu bar, then turn it on, then wait about 20 seconds and then manually choose name of my network.
After this procedure iMac is finally online.
Settings of the AirPort are:
AirPort tab
Wireless Security: WPA2 personal
Channel: Automatic
Mode: 802/11 g/b
Internet tab
Connecting using: Ethernet
Configure: Using DHCP
WAN ethernet port: Automatic
Network tab
Distribute IP address unchecked (no difference when checked - tested)
Any idea how to fix it?
Thanks in advance!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

Thanks a bunch, Duane!
You pointed me to the exact answer.
iMac joins the network automatically now, although I had to change original automatic login of an admin user to manual login page, because after automatic login as one of three users, an error message "Network error" appeared quicker than the actual joining the network, that came a few seconds later.
After manual logging (it probably needed a little more time) it's OK.
Thanks again and greeting from Czech Republic!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

Just signed up for cc, message not available at present, what happens now and when will it be availa

just signed up for cc, message back Not available at present, what do i now do and wen will it be available

What's not available? The activation server? Or payment? or something else?
The Cloud is definitely available right now.

Facetime: user not available right away after dial

When I am trying to do a Facetime Call (Audio and Facetime video), it gives right away a message of "User not available for Facetime". This number used to work no problem before. I tried to do a test with another Iphone to find the reason why this happened. So I found out that it couldn't be a number block nor a Facetime being turned off. Anyone know the reason why it jumps directly to the message of "User not available"?
It seems like an auto-decline incoming calls, but Iphone does not have such option.
Thanks

Theres nothing wrong with your phone, it could mean any if the following:
The person(s) you are callig have blocked you
The person(s) have a dead phone
The person(s) aren't accepting calls
Hope I helped!

Messages not available in XI after Restart

Similar Messages

Maybe you are looking for