Messages not displaying correctly

Hi All
Finally took the plunge and converted to OS10, I have been using macs for years, but suited me to stay with OS9 for as long as possible.
The problem I have is in mail, that in certain messages the text views as characters and symbols instead of a readable message.
If I cut and paste the text to another programme and change the font the message is readable.
If i go back to OS9 and read the message in Outlook no problem.
Can anyone help with this.
Cheers
Mike

Thanks for the reply - I don't have either of these
fonts installed on my mac.
Send me a screenshot and I'll try to identify the problem font (tom at bluesky dot org).

Similar Messages

Imqadmin: No. of messages not displayed correctly in durable subs screen

This question applies to the standalone platform edition of Message Queue v3.5 SP2 running on solaris.
I have a number of durable subscribers connecting to a topic. Each & all subscriber have a selector set to filter the data.
From imqadmin I can select the topic and bring up the broker destination properties. If I happen to have messages that have not been consumed (I halt my consumer code to test this), the count on the "basic" screen shows the current and correct number of messages waiting.
If I drill down and go to the Durable Subscriptions screen, the number of messages for the durable subscriber with the relevant selector is always 0... and doesn't seem to reflect that there are messages that haven't been consumed. (Even though my code does see the data come in when I reconnect the consumer).
Is this a bug in the imqadmin display or is there a reason why it can't display the message count correctly at the durable sub screen for consumers with a selector set?

I don't think I'm seeing the same bug... in my app the producer and consumer are both active.
Relevant information for this test:
1) My producer and consumer are both active at the same time.
2) My consumer is using a transacted session and it is also consuming messages synchronously
3) I produce 250 messages and send them to my destination (a topic)
4) For this test I force the consumer to fail on its handling of the data. Say it was trying to handle 50 messages - it rollsback the session and tries again. Therefore leaving 250 messages still in the topic.
The result is that when I display the destination properties screen using imqadmin:
1) The current number of messages count is displayed correctly as 250.
2) However, the count for the durable subscriber with the correct selector is still showing 0.
Once I allow the consumer to resume its work, all 250 messages are handled correctly by that consumer only and the count (in 1) is shown as 0.
So the producer, consumer process works fine but the imqadmin gui seems a little confused.

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Pdf not displayed correctly in preview

We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
The same problem appears on a iPad.
It is not displayed correctly.
In all other programms I tried it is displayed properly.
We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
Is this only a preview problem and should I ignore it?

Hi there,
I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
I would be extremely grateful for some help with this please!
Thanks!

Umlauts not displayed correctly

Hi,
We have developed a screen in 12.1 and the umlauts (German & Spanish) are not display correctly. Is there a language pack / custom actions we need deploy for this to work properly?
Regards,
Chanti.

Its those special characters with a pair of dots on their head, like ä etc. These are not being displayed properly in the Web UI screens after upgrading to 12.1.
These special characters are coded in the alert/warning/error messages in a .js file. Two things here -
i) When we did the migration from 11.5 to 12.1, those got transformed to a [] (read squarebox) sorts. Are these something that the migration tool can't handle as desired?
ii) We fixed these characters manually in the code in 12.1. But when we run the script they are still not displayed correctly in the Web UI, for instance ä is being displayed as A~, something like that. Wondering if we need to deploy some custom actions or add a line at the top of .js or .html code?
Regards,
Chanti.

Flash movie not displayed correctly in IE 8 on some Windows OS

Has anyone seen this problem?
I'm using CS4 to export a basic flash movie with embed tags pre scripted...
And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
Are there any suggestions as to what i could try?
Do i need different flash embed tags? Or is this a user issue?
Please Advise as soon as possible...
Thanks

I'm sorry, i forgot to explain that I didn't upload the flash published html because it did and produced the exact same results.
The flash published still got cropped off on 1 vista os(I.E 8) running from a laptop and 1 windows 7(I.E. 8) latop os...
Its good to hear that you're able to see it clearly... however in my QA efforts, i've been asked to fix the issue or drop the flash banner all together.
I've tried every which way, i've even converted the embed tags (not uploaded by the way) to a js script and it STILL gets cropped of on 2 ie8 run OS systems...
And now i'm not sure what else to try on my end.
I'm currious if because this is an XML driven flash banner, this may be an issue? But it still doesn't explain why some people can see this in IE 8 as you can and others get a cropped banner like in my screen shot sample.
Again i invite everyone in the forum to take a look at the sample links, as i'd be curious to see who else is seeing this.
By the way "kglad" Thank you so much... please keep the suggestions coming... but everything you've suggested, i've tried.
This is very perplexing. Is this a setting issue? or is there some setting on the user side i'm not aware of? Either way, as usual... the flash developer is blamed so i must find a solution.
Link to flash sample
http://www.extremefx.net/flashie8issue/flashtest.html
Link to screen shot sample on a Vista and Windows 7 running IE 8 browser
http://www.extremefx.net/flashie8issue/ie8issue.jpg
Again... eagerly await feed back from you and the rest of the forum.
Message was edited by: RegGFX

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

Hello,
I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list. However,
in Outlook 2010, the form is not rendered properly.
When I clicked the "If there are problems with how this message is displayed, click here to view it in a web browser" link, the email is opened in
IE and the form is displayed correctly.
I also tried opening the same email in other clients, such as Thunderbird, Apple Mail Client and in mobile phones - the form is displayed correctly. I wonder
why it fails to do so in Outlook 2010. The user mentioned that this does not happen in Outlook 2003 and prior to migration (I used Exchange 2010 previously). I have also tried using OWA, but the form does not display correctly
Any help?
Note: I can't attach any images or links as it is mentioned that my account is not verified yet. I will post some screenshots when it is possible to do so

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Https sites not displaying correctly

Here's an interesting problem thats cropped up on a couple of machines here. Hopefully someone else has found the cause!
The problem is that some HTTPS sites are not displaying correctly. We have seen this with vimeo, and with wetransfer. I have included a screenshot of the issue on both safari and on chrome.
Cross checks i've been able to verify:
another machine with the same OS (10.8.5) looking at the same sites is fine and another running 10.9.4 is not, so this appears not to be OS or browser version related.
this does not happen in a different user account on the same machine, so the issue appears to be in the user home.
this happens across all browsers in this user account. so it appears to be a supporting technology or cache going wrong rather than a specific browser.
I have emptied the user preferences, and cache folders with no change.
Clearly i can sidestep this by creating a new user home, but that isn't actually getting to the bottom of what is going wrong, and it would be better to identify the issue!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Map app not displaying correctly

I recently downloaded the most recent os 8.1.3 on my iphone 4s. Now the map app (apple default) doesn't display correctly. I only see the grid and my location dot in standard view, no street names or lines, no details whatsoever. This is affecting any app that uses the apple default (Zillow, trulia, etc). My husband has the exact same iphone 4s and he has the most current os and his map app works fine. I'm thinking that I should try to reload the most current os but since it is the most current, there doesn't seem to be an obvious way since all message are "you have the most current version". I could also try to download just the most recent version of the map app but since it is a default, I don't know how. Any suggestions?

Hi meedjmom,
If you are having issues with your Maps application not displaying correctly, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
    name = n;
    acctNo = acct;
    branchNumber = b;
//toString method
public String toString()
String str;
    str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
    return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
    private final double
    MONTHLY_DEPOSITS = 100,
    COMPANY_MATCH = 10,
    MONTHLY_INTEREST = 1;
    private double monthlyDeposit,
    coMatch,
    monthlyInt;
    //The constructor accepts as arguments the name, acctNo, and branchNumber
    public AccountTrans(String n, String acct, int b)
        super(n, acct, b);
    //The setMonthlyDeposit accepts the value for the monthly deposit amount
    public void setMonthlyDeposit(double deposit)
        monthlyDeposit = deposit;
    //The setCompanyMatch accepts the value for the monthly company match amount
    public void setCompanyMatch(double match)
        coMatch = match;
    //The setMonthlyInterest accepts the value for the monthly interest amount
    public void setMonthlyInterest(double interest)
        monthlyInt = interest;
    //toString method
    public String toString()
        String str;
        str = super.toString() +
        "\nAccount Type: Hybrid Retirement" +
        "\nDeposits: $" + monthlyDeposit +
        "\nCompany Match: $" + coMatch +
        "\nInterest: $" + monthlyInt;
        return str;
    //Using the getter method for the customer.java fields
    public double getCurrentBalance()
        double currentBalance;
        currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
        return currentBalance;
}File 3
    public static void main(String[] args)
//Creates the AccountTrans object
        AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
        //Created to store the values for the MonthlyDeposit,
        //CompanyMatch, MonthlyInterest
        acctTrans.setMonthlyDeposit(100);
        acctTrans.setCompanyMatch(10);
        acctTrans.setMonthlyInterest(5);
        DecimalFormat dollar = new DecimalFormat("#,##0.00");
        //This will display the customer's data
        System.out.println(acctTrans);
        //This will display the current balance times 2 since the current
        //month is February.
        System.out.println("Your current balance is $"
                + dollar.format(acctTrans.getCurrentBalance()));
    }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
    (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Often you solve your own problem whilst preparing the SSCCE.
    - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Indentation is essential to following program code.
      - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

Blender do not display correctly after upgrading xorg

Yesterday, I do a pacman -Syu
and then found that blender do not display correctly.
The panels are not shown and the working area is cut into 2 halves of different colors.
Then I check /var/cache and found that some X components were upgraded.
My graphic card is ATi mobility Radeon 7500
Anybody can help?Thanks!

From the description, I seem to have exactly the same problem. My wm is dwm-4.0 and I grabbed some other info which may be useful:
[root@myhost ~]# Xorg -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux myhost 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
[root@myhost ~]# blender -v
Blender 2.43
[root@myhost ~]# pacman -Qii xorg
Name : xorg
Version : 11R7.0-1
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL :
License : None
Architecture : i686
Size : 4096
Build Date : Sat Feb 18 14:04:14 2006 UTC
Install Date : Wed Jul 26 22:39:07 2006 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : xf86-input-keyboard xf86-input-mouse xf86-video-vesa xorg-server xorg-server-utils xorg-xauth xorg-xinit xorg-xkb-utils
Required By : None
Conflicts With : None
Description : X.Org dummy package
[root@myhost ~]# pacman -Qii blender
Name : blender
Version : 2.43-3
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL : http://blender3d.org
License : None
Architecture : i686
Size : 31041839
Build Date : Mon Mar 12 22:28:29 2007 UTC
Install Date : Thu Mar 22 05:45:42 2007 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : desktop-file-utils libjpeg libpng openexr python>=2.5 sdl
Required By : None
Conflicts With : None
Description : A fully integrated 3D graphics creation suite
Also, when I run blender from a term it says 'Compiled with Python version 2.5' (no error messages).
It has been a few days since I pacman -Syu'd, so I'll do that and report back if it fixes things.

Websites not displayed correctly

Hi,
since i updated to Safari 6.0.2, many websites are not displayed correctly anymore. instead of pictures i see a blue question mark, sometimes the whoe layout is a mess. this concerns multiple websites, alse like facebook or youtube. when i refresh, it mostly orks, so i think it´s not a plugin-issue
Curiously, also in Mail, some Emails are not displayed correctly.
Thank´s for any suggestions or ideas how to solve that.
Christoph

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Uploaded image files not displayed correctly

Hello everyone,
I used the following article(on o'reilly) as reference for file upload:
http://www.onjava.com/pub/a/onjava/2001/04/05/upload.html?page=1
While it works fine for most files types, there are problems with image files.(I am using PrintStream, BufferedOutputStream,FileOutputStream to write the files on the server).
When links to these image files are clicked, the uploaded gif and jpeg image files are not displayed correctly.When directly opening the files on the server, it gives a 'error opening file' message.But other word docs , text files do not give an error.
If anyone else has come across the same problem and could help out , I would appreciate it.
Thanks in advance.

I do not want to enter into the logic which you are following to upload the file. I did the upload process successfully even as a blob datatype.
For this I followed the logic given in http://www.java.isavvix.com/codeexchange/codeexchange-viewdetail.jsp?id=22.
Here you can download the complete sourse code, which is working fine for gif and jpeg, I tested.
Please go with this. Also let me know, if you still have problem.
Regards.

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

Messages not displaying correctly

Similar Messages

Maybe you are looking for