Messages not getting displayed in BADI

Hi experts,
I have implemented a BADI for automating FB50 in MIGO. Atlast i am using
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
    msgid                     = WA_MESSTAB-MSGID
    msgnr                     = WA_MESSTAB-MSGNR
   MSGV1                     = WA_MESSTAB-MSGV1
   MSGV2                     = WA_MESSTAB-MSGV2
   MSGV3                     = WA_MESSTAB-MSGV3
   MSGV4                     = WA_MESSTAB-MSGV4
IMPORTING
   MESSAGE_TEXT_OUTPUT       = WA_TEXTOUT
MESSAGE WA_TEXTOUT TYPE 'I'.
But after this message is executed...the MIGO transaction's message is getting triggered immediately. So my message is not popping up.
What to do?

When i debug the program...
I get the following things..
wa_messtab-msgid = F5
wa_messtab-msgnr = 312
wa_messtab-msgv1 = 100128404
wa_messtab-msgv2 = XYZ
wa_textout = Document 100128404 was posted in company code XYZ
and when i say
message wa_textout type 'i'.
at the output a popup window should display information in wa_textout.
But this is not happening and message of type 'S' is getting displayed...that is standard msg of MIGO
which is - Material document 5000115652 posted
I want my custom msg in wa_textout to be displayed first. before the standard MIGO msg.

Similar Messages

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Support messages not getting displayed in Messages Tab - Solar01/02

Hi,
I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
Please help. Points will be awarded for useful answers.
Regards,
J.Prabananth

Dear Prabanath,
       I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
   That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
     Let me know if there are any issues. I might be able to help you.
N

Message not getting displayed in BTE 1030

I am displaying a message in functional module implemented for BTE 1030.
The message is not getting diplayed. I have changed the message tyto 'S, I. W, E but still it does not display. The sy-subrc is 0 after passing the messga statement.
(The functional module is called normally and not in background)

Just check your settings in transaction FIBF, and make sure you have choose the right Process Modules(Ususally we choose "of an SAP Application"), and if you have set some other limitation on Country ISO code or Application Indicator, pls make sure all of them have been satisfied.

Complete error message not getting displayed

Hi All,
I've built a custom webadi integrator which loads into a custom staging table.
All fine with the webadi but the error messages are getting truncated to only 45 characters. The variable size is 4000 characters and a debug message before RAISE_APPLICATION_ERROR indicates there is no truncation of the message in the PL SQL package.
Where and how is my message getting truncated?
Any pointers highly appreciated !

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Message not getting displayed on page

Hello,
I have extended a controller and after some validation, i need to display message on top of Page. Please let me know.
I am not able to display the Message on top of the page; I am able to find the error entry in the log as below
[23]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Days ====>null
[23]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Hours ====>18
[25]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Entering processFormRequest
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:PersonId 13552
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:DurationHours 18
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:NetAccrual 6
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Sql select accrual from pto_bces
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Value true
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Value1 18
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Value2 6
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:ProjectedEndDate 2008-09-10
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Leaving processFormRequest
[41]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Nextnull
[42]:EXCEPTION:[kbv.oracle.apps.per.selfservice.loa.webui.MvnCreateAbsenceMainCO]:Hours.null
[43]:ERROR:[fnd.common.Message.auto_log]:PERMVN_ABS_HOURS_MESSAGENOBJECT_CODE2008-09-10
Code snippet
/*try
if (s!=null)
if (i < Integer.parseInt(s))
MessageToken[] tokens = { new MessageToken("OBJECT_CODE",l)};
OAException message = new OAException("PER", "MVN_ABS_HOURS_MESSAGE", tokens,OAException.INFORMATION, null);
// OAException message = new OAException("AK", "FWK_TBX_INVALID_EMP_NUMBER", tokens,OAException.INFORMATION, null);
pageContext.putDialogMessage(message);
// throw new OAException("PER","MVN_ABS_HOURS_MESSAGE",tokens);
// OAException message = new OAException("AK", "FWK_TBX_INVALID_EMP_NUMBER", tokens,OAException.INFORMATION, null);
// pageContext.putDialogMessage(message);
}

It displays on the log not on the page
[174]:ERROR:[fnd.common.Message.auto_log]:PERMVN_ABS_HOURS_MESSAGENOBJECT_CODE2008-09-10
[174]:ERROR:[fnd.framework.OAException]:Your request cannot be processed since you do not have enough accrued time as of the date you are requesting.
Code
if (s!=null)
if (i < Integer.parseInt(s))
MessageToken[] tokens = { new MessageToken("OBJECT_CODE",l)};
OAException message = new OAException("PER", "MVN_ABS_HOURS_MESSAGE", tokens,OAException.INFORMATION, null);
// OAException message = new OAException("AK", "FWK_TBX_INVALID_EMP_NUMBER", tokens,OAException.INFORMATION, null);
// pageContext.putDialogMessage(message);
throw new OAException("PER","MVN_ABS_HOURS_MESSAGE",tokens);
// throw message;
// OAException message = new OAException("AK", "FWK_TBX_INVALID_EMP_NUMBER", tokens,OAException.INFORMATION, null);
// pageContext.putDialogMessage(message);
}

Message is not getting displayed.

Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT    NUMBER(10,2);
TRMS      NUMBER;
I_RATE    NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

Hi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why?

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Error msg not getting displayed on first time button click in SRM UI

Hi,
I have created a custom message in an impl. of SRM BADI BBP_DOC_CHECK_BADI in which one message is getting populated correctly in debugging. Again, when I check PO, the message is getting displayed correctly, however when I click on order button for the first time, it is not getting displayed but on subsequent occassion, it is working fine. Just wonder, why this is not happening for first time. Any input ??
Regards,
Ni3

Hi Virender,
I found a note 1239499 close to my requirement but not valid for SRM release 5.0. Is it the same, you wish to referred or is there any other?
Regards,
Ni3

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Messages not getting displayed in BADI

Similar Messages

Maybe you are looking for