Messages not processed from IP_OUT_QUEUE

Hi all,
I have enqueued the message to IP_OUT_QUEUE and consumer as B2BUSER. Still the message are not getting processed from the Queue. From the b2b.log, I see the following statements "***B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
What could be problem... It used to work before... Nothing has changed after that.... any clues??? I am using 10.1.2
2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Purge Size = 3000
2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Load Factor = 0.75
2009.09.08 at 23:43:33:452: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:43:33:455: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
***2009.09.08 at 23:43:36:433: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter***
***2009.09.08 at 23:43:37:016: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
***2009.09.08 at 23:43:37:020: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message***
2009.09.08 at 23:44:03:091: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (DEBUG) Persistency manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (INFORMATION) Entering Use Case: queryConfiguration
2009.09.08 at 23:44:03:092: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2009.09.08 at 23:44:03:093: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2009.09.08 at 23:44:03:093: B2BStarter thread: Repository - (INFORMATION) CatalogDriver.runQuery() select ID , CLASSTYPE , NOTM , ISSEEDED , canreactivate , name , created , bilevel , LifeCycleState , description , description_clob , warningmessage , warningmessage_clob , status , type from TIP_Configuration_t t where ( LifeCycleState= ? )
2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) CatalogDriver.setBindVariables():
2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) Bind Variable : index = 2 value = Active
2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, String) - constructor
2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, BLOB) - constructor
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) LargeStringImpl.setBlob() - extracting blob contents to stringBuffer
2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) CatalogDriver.constructBaseObject()
20
Edited by: Praveen I on Sep 9, 2009 12:18 PM

Hi Pravin,
Check b2b_instancemesage view for related messages and make sure that payload is coming properly.
Also make sure that you have atleast one configuration in deployed state. Also make sure that transportServlet is up and running by accessing below url -
http://localhost:port/b2b/transportServlet
Also try by using the enqueue stubs which comes as part of tutorial (Ora_Home/ip/tutorial)
How are you enquing message to this queue? Please mail the b2b log in debug mode to my id (in my profile)/post the same here.
Regards,
Anuj

Similar Messages

Message "not downloaded from server. You need to take this account online

After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
I can still read all email in any other mailbox.
I can read all email received after upgrading.
I appreciate any help.
G4 17 inch Mac OS X (10.4.9) 1 gb ram

You upgraded to 10.4.9 from what?
If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

Hello, Anita.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup. This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6. Try going through the steps in the article below.
iOS: Unable to restore from backup of a newer device
I would also check to see the backup dates in iTunes and if the backup is located on iCloud instead of iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
Cheers,
Jason H.

FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server"

It took me 4 days to figure it out but there is a solution to the problem "the messsage has not been downloaded from server" and "the message has no content".
I do not have to set up "push" accounts from yahoo or gmail and it works with my corporate email.
Apple can reach me at <Message was edited by: Host> to discuss this issue.

I'm not a computer technician, and if you were to give me a few days looking at the problem, i'm sure I or anyone else could provide a solution. I'm not too bothered about the message appearing 50% of the time as i'm usually within easy reach of a Laptop or PC or can find another method to get access to my email.
So i'm not pi**ed off that you have found a solution. I'm just trying to obtain information for a post that says "FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server" in the Apple HELP FORUMS...

Proxy messages not processed in PI 7.1 pipeline coming from local client

Dear experts,
We have recently installed a PI7.1 system with two clients:
200 - Integration Server
250 - Local Integration Engine
Now, when we send proxy messages from the 250 client to the 200 client,
the messages are not processed in the integration server. The message
does arrive as we can see in SXMB_MONI, but there is no receiver determination
or what-so-ever executed. In SXMB_MONI we can see that only the SENDER
pipeline is executed.
Proxy messages from 6.20 and 7.0 systems to IS are properly processed.
Ofcourse the 250 client is defined as an application system in the integation engine
configuration (SXMB_ADM).
regards,
Jeroen

In SXMB_MONI we can see that only the SENDER pipeline is executed.
Yes. Even if no receivers are configured the data from sender to XI should be visible in sxmb_moni.
Check smq1 at XI. There could be some problem with the technical system for client 250.
Regards,
Prateek

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

Message not deleting from Topic after successfully dequeue

Hi All,
Help please..
I need to design a process where message have to produce into a AQ JMS topic and later i have to consume the message from the same topic and publish to a Queue.
In order to move on this i have created a sample My_Topic1 and My_Queue1 with below syntax
Topic:-
EXEC dbms_aqadm.create_queue_table (queue_table=>'MY_Topic1', queue_payload_type=>'sys.aq$_jms_text_message', multiple_consumers=>true );
EXEC dbms_aqadm.create_queue(queue_name=>'MY_Topic1', queue_table=>'MY_Topic1');
EXEC dbms_aqadm.start_queue(queue_name=>'MY_Topic1');
Queue:-
EXEC dbms_aqadm.create_queue_table (queue_table=>'My_Queue1', queue_payload_type=>'sys.aq$_jms_text_message', multiple_consumers=>false);
EXEC dbms_aqadm.create_queue(queue_name=>'My_Queue1', queue_table=>'My_Queue1');
EXEC dbms_aqadm.start_queue(queue_name=>'My_Queue1');
Now i created Foreign server and create local and destination topic of queue.topics name and also created Data source of XAType.
Now my bpel process getting a message(which as one element of sting type) from a web service and i am producing the same message to Topic. Once the message published to topic in a separate composite my JMS Adaptor dequeue/Consume the message from the topic and subscribe it to queue.
The Above scenario working as expected but here what my observation on this
1)When i dequeue message from a topic using bpel process successfully i am able to subscribe the message to queue but the message still remain in the topic i think it suppose to get of the topic once successfully dequeued.
Even i check the subscriber topic table and one subscriber is listening to the topic.
2)If in case any error generated at the time of subscribing to the queue the message should rollback( because i am using XA Transaction) but i think it is not happening as i can see in my topic view aq$my_topic1 MGS_STATE changed to PROCESSED.
Can some one please let me know where i am going wrong.
Thanks in advance.
Regards,
Tarak.
Edited by: Tarak on Sep 9, 2012 8:47 PM

The behavior should be the process consume a message from the topic and will try to do its job. If this process fail, {code]
But in this message not there in topic even it is failed in soa process.....i am very much interested how this XA is working that the reason i am trying all this.What to do with a failed/expired message is usually configurable, but doesn't make sense to place it in the same topic again... If the messages are failing too quickly better to adjust the max_retries and retry_delay...I agress in real senario we will move to error queue. But in that case also some how we need to read the message from queue and publish to the end system.
I am just trying to understand the behavior and what i came to know is after all the retire fails message not going to topictable _E. But when i pass Expire time property or time to live then it is moving to error table.What do you mean? What server was restarted, the database or the soa server? Messages that still didn't reach the max retry number will still be retried...Wheni am bouncing my managed server soa_server1 i can see the invoke activity is trying to publish the message into queue... this is happens after server restart and suppose not to happen....
But thanks alot for the inputs...
Regards,
Tarak.

Work flow mails not processing from SAP Outbox to Approvers

Hello,
We are working on the implementation of Work flow for Purchase orders.
Work flow customization is completed and even work flow is triggering when ever I create Purchase Order.
Even Agent assignment also completed for work flow tasks via T code PTFC_CHG.
Problem here is Work flow mails are not processing out of SAP Outbox to approvers even also after executing the program RSWUWFML2.
If I check in SOST,I will not see any of the entries related to work flow mails.
For eg:If I creates a Purchase order it will trigger Release Strategy and I can see the message to Approvers,like "Please Approver PO..."
Only above I can see in my SAP Outbox.
So how can I Process these messages to approvers SAP Inbox.
Any Pre Setting I have to do?
With regards,
SPK

Hi SP,
I may be wrong, but on reading ur thread, I feel u r mis interpreting SAP Outbox with Outlook.
Is it so, because u have mentioned about RSWUWFML2 and SOST, which comes into picture only if u r using an external mail like Outlook.
If its Outlook, then there is no doubt that ur work item would get deleted from SAP Inbox and would be present only in Outlook.
If its SAP Outbox, then u r not supposed to get ur work item in ur Outbox unless it is processed or executed thru ur SAP Inbox.
Hope it helps.
Aditya
Edited by: Aditya Varrier on May 23, 2008 1:52 PM

Message not processed after technical routing

Hi ,
I have a SOAP ->ABAP Proxy (R/3) scenario that sometimes not processed completely. When checking the message in SXMB_MONI I notice a grey dot (which means log version) in the status column next to the message, Upon opening the message I can't see any errors.
The message has gone through the following steps.
Inbound Message
Receiver Identification
Interface Determination
Message Branch According to Receiver List
Request Message Mapping
Technical Routing
But final stage call adapter not executed so i came to know that response message not reached to XI.
This is occuring once or twice for every 25 to 30 messages.
Can any one provide some suggestions to rectify the above issue.
Thanks & Regards,
Arun.

Check out the below things,
1. Check for which input data it is giving. (Any specific data).
2. This may happen becaus of time out. (Huge data processing)
Also check out below link,
['Log Version' status in 'SXMB_MONI']
Resend the message from sender and it will work properly.
Log version means "Waiting for response" and liable to fail if response not received on time.
Edited by: Siddhesh Pathak on May 13, 2009 12:10 PM

XML messages not processed

Hi all,
I have a problem in my FTP folder. I have a text file to be processed as XML messages in XI. The problem is, it's not processing. The text file goes straight to the archive folder without processing it to an XML file. It's not in sxmb_moni and smq2. I'm not sure what happened. It was being processed before.
Thanks.
Regards,
IX

Check your sender file adapter status from the Communication channel monitoring on your Runtime Workbench.
Thanks,
Pooja Pandey

Print message not processed

I am able to take a print preview and print after attaching the custom message in purchase order but after saving it .
The message says that it is still in process and it is not processed.
Any idea where to check and where is the problem

check sp02 whether processing has been completed or not..also try this...
check the output immediately check box when pop up for print options are displayed..after that save it try again n see what happens

Mail - "message not downloaded from server"

I know that the message was download from the server because it was todays mail from this first thing morning. This happens once or twice a week, I will go to view a message from a couple of hours ago and i will get this meesage.
Anyone have any Ideas??
Thanks

Thank you for your help, that did the trick. My mail box was too large, once I emptied my trash the problem has not repeated itself. I thought I had my trash set to empty upon quiting. My Mail box was 1.6 gigs and I was trying to keep it clean by throwing old mail and junk mail away, but it built up and I did not realize it.

Inaccurate "Message not downloaded from server" message

I recently started seeing error messages like the one below appearing in the body of my Mail messages right after reading new messages from the POP server at my work (a large hospital). I'm running OS 10.3.9 on a dual 2GHz PowerPC G5. None of the other Mac users in my group at work are getting this type of error message:
"The message from "Doe, John" <[email protected]> concerning “RE: New spheres” has not been downloaded from the server. You need to take this account online in order to download it."
I don't believe this has anything to do with our mail server at work. My account is "on-line" when I see this message, and taking it off-line and then on-line again does not correct the problem.
When I see it, this error message appears as the only text in many or all of the e-mails in my "InBox" -- and it replaces the actual text of each message -- even in messages that were previously downloaded and read successfully. I have never seen this message appear in any other mail folders -- I have only seen it in mail messages in my InBox.
This error message is clearly not accurate because when I see it in one or more emails, I can simply quit Mail and then re-start it and then I can see all of my In-Box mail messages correctly again, (without downloading anything again from the server).
I have tried deleting the mail preference file, and I have run the utility program Yasu to try to clean things up. Nothing has worked to fix this bug.
Suggestions?
Dual 2 GHz PowerPC G5 Mac OS X (10.3.9)

This is not a bug.
All email clients have limits and the recommended mailbox size limit for Jaguar or Panther Mail is 1GB and for Tiger Mail, 2GB.
This error message indicates an "overstuffed" mailbox issue which means the account's inbox mailbox has either approached or exceeded 1GB in size or the mailbox has some corruption. An "overstuffed" mailbox issue can occur at any mailbox size but is more likely to occur depending on the number and size of message attachments contained in a mailbox and especially as a mailbox approaches or exceeds 1GB in size for Jaguar or Panther Mail.
This has been eliminated with Tiger Mail since the mbox format has been improved over previous Mail.app versions but there is still a recommended mailbox size limit (2GB) with Tiger Mail.
Quit the Mail.app first and using the Finder go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account) > INBOX.mbox.
Move the INBOX.mbox to the Desktop.
Launch Mail and a new INBOX.mbox will be created automatically by Mail within the account named folder.
This will allow the Mail.app to function properly again while working on the old INBOX.mbox moved to the Desktop to recover the existing messages.
Control-click on the old INBOX.mbox moved to the Desktop and at the menu window that appears, select Show Package Contents.
List the package content file names and size each here.
This information is required to determine the next step to take to recover the existing messages.
For future reference, since an account's Inbox mailbox is usually the most active mailbox and more prone to minor corruption over time, it is not a good idea to use an account's Inbox mailbox as the final storage location for all received messages not deleted.
Better to utilize user created "On My Mac" location mailboxes to sort received messages by category.
Before upgrading to Tiger Mail, I didn't allow any mailbox to exceed 500MB or so in size, used the Rebuild Mailbox function on the most active mailboxes on a regular basis (once a month or so depending on activity) and I never experienced an overstuffed mailbox issue.

Messages not removed from Inbox when deleted on iphone

My company has an exchange based mail system and they provide imap access for devices like the iphone.
I set up the iphone to connect to the server and can read messages just fine. I set the Deleted items option in the Settings app for Mail to be the Deleted Items folder on the server.
When I delete the messages on the iphone this is what happens:
1) The message disappears from the Inbox on the phone.
2) The message appears in the Trash on the phone.
3) The message appears in the Deleted Items folder on the server (as viewed from my normal work computer).
4) The message stays in the Inbox folder on the server.
So, in sum, things do what they are supposed to do on the phone. On the server, I wind up with 2 copies of the same message - one in Inbox and one in Deleted Items.
I will point out that the same behavior occurs when I try to move an item from any folder to any other from the iphone. The message winds up in both the original and the target folders....
What do I need to do to set it up so that messages are removed from the originating folder on a delete or move?
Thanks

Sounds like typical POP behavior.
Is your mail account POP or IMAP?
If POP, then your mail activities are normal, that's how POP operates.
If it's IMAP, contact your server admin, as IMAP should be reflecting all activity across all devices with that specific account on it.

Oracle AQ: Message not removed from source queue after propagation

Hi.
I have been playing around with a test setup for a "fanning out"-propagation system.
I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
I am using Oracle 10g.
Here is my setup:
--Test payload
CREATE OR REPLACE TYPE test_payload AS OBJECT(
test_id NUMBER,
test_dt DATE);
commit;
DECLARE
subscriber SYS.aq$_agent;
BEGIN
--- Create Originating Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
--- Create Destination Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
--- Create Destination Queue2 and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
--- Add Subscribers and schedule propagation
subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
--Propagation to queues
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
commit;
END;
--Put something on the queue
DECLARE
message_handle RAW( 16 );
MESSAGE test_payload;
nq_opt dbms_aq.enqueue_options_t;
nq_pro dbms_aq.message_properties_t;
begin
nq_opt.visibility := dbms_aq.immediate;
nq_pro.expiration := dbms_aq.never;
MESSAGE := test_payload( 2, SYSDATE );
DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
COMMIT;
END;
I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
-AA

Messages not processed from IP_OUT_QUEUE

Similar Messages

Maybe you are looking for