Messages not showing up in log files

I'm running a server program compiled with NetExpress 5.0 and Tuxedo 10gR3. The server program has several DISPLAY statements and those messages used to show up in the stdout file when running on previous version of Tuxedo but not anymore.
Is this a restriction in Tuxedo 10?

It looks a strange problem since in the Tuxedo library before service dispatching we can still see the output to stdout. But I also met same issue that DISPLAY in service can not print content to stdout. My netexpression is also 5.0. Which version you use before the Tuxedo migration?

Similar Messages

XMLForm Service message keep showing in the log file

Hello,
The message below keeps showing in the log file when the form is opening in Workspace ES. It keeps repeating like hundred times in the log file when the form is launching.
It just happen to some forms but not to all forms. I tried to see if there is any thing strange in the form but could not find any thing wrong in the form nor any explaination about this error on Adobe site or Internet. Note that I am still using LiveCycle ES 8.2.1 with SP3.
=============
[10/18/11 13:46:22:644 CDT] 0000003e XMLFormServic W com.adobe.service.ProcessResource$ManagerImpl log ALC-XTG-102-001: [1712] Bad value: 'designer__defaultHyphenation.para.hyphenation' of the 'use' attribute of 'hyphenation' element ''. Default will be used instead.
============
Can any one please advise.
Thanks in advance,
Han

Yes,
Upgrade it to SP1 with hot-fix. SUN has a very big bug in the 4.16 SP1 software . u have to apply that hot-fix otherwise you will in big bug in userpassword attribute and some other security issues.

Server started in RUNNING mode not showing in Startup Log File when MS Starts

Dear all,
When we start OSB Managed Server, server status is showing Running Status in Web logic console and it is also serving the requests. but in server Start up log file, it is not showing 'Server started in RUNNING mode' after it started.
this behavior is only for 4 managed servers in cluster of 6 managed servers. other 2 managed servers are starting and showing the message correctly.
please some body show some light on it as we need to fix this issue urgently.
thanks in advance.
pr

Dear all,
When we start OSB Managed Server, server status is showing Running Status in Web logic console and it is also serving the requests. but in server Start up log file, it is not showing 'Server started in RUNNING mode' after it started.
this behavior is only for 4 managed servers in cluster of 6 managed servers. other 2 managed servers are starting and showing the message correctly.
please some body show some light on it as we need to fix this issue urgently.
thanks in advance.
pr

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

Checkpoint not complete in alert log file Oracle 11gR2 RAC

Hi,
I found checkpoint not complete in alert log file, almost every 3 seconds .
In metalink i saw for this error, archive_lag_target=0, already this value was set to 0 in my database.
We have 7 redo log groups for each instance, each group is of two redo log files, each file size is 50m.
To avoid this error what i need to do..........
please help me..................

When you "checkpoint not complete" messages in your alert log this normally means your online redo logs are defined too small to handle the load and you have filled and need to switch to a new online redo log before the checkpoint triggered by the previous log switch has been completed.
Increasing your online redo log size is normally the fix for this.
HTH -- Mark D Powell --
PS - The following Oracle support document may also apply:
Checkpoint Not Complete In Alert.log Due To Setting Of Archive_lag_target [ID 435780.1]
Edited by: Mark D Powell on Nov 7, 2011 8:29 AM

"checkpoint not complete" in alert log file.

Hi, all.
I have got a message of "Checkpoint not complete" in alert log file.
Thread 2 advanced to log sequence 531
Current log# 7 seq# 531 mem# 0: \\.\REDO231
Current log# 7 seq# 531 mem# 1: \\.\REDO232
Thread 2 cannot allocate new log, sequence 532
Checkpoint not complete
Current log# 7 seq# 531 mem# 0: \\.\REDO231
Current log# 7 seq# 531 mem# 1: \\.\REDO232
I searched "Checkpoint not complete" issue in this forum.
As solutions,
1. add more redo log groups
2. increase the size of redo log
3. check I/O contention
4. set LOG_CHECKPOINT_INTERVAL, LOG_CHECKPOINT_TIMEOUT or
FAST_START_MTTR_TARGET
I think No.4 is the possible first approach in our environment.
I think No.1 and No2 are not the ploblems in our environment.
I ask the above issue oracle support center, but
I was told that "if you are not getting this message frequently, you do not need to worry about it" from an oracle engineer.
Is this true?? If I am not getting this message frequently, there is no problem
in terms of database integrity, consistency, and performance?
I will be waiting for your advice and experience in real life.
Thanks and Regards.

Redo Log Tuning Advisory and Automatic Checkpoint Tuning are new features introduced in Oracle 10G, if you are on 10g you may benefit from these features.
The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time. Undersized log files increase checkpoint activity and increase CPU usage. As rule of thumb switching logs at most once every fifteen minutes.
Checkpoint frequency is affected by several factors, including log file size and the setting of the FAST_START_MTTR_TARGET initialization parameter. If the FAST_START_MTTR_TARGET parameter is set to limit the instance recovery time, Oracle automatically tries to checkpoint as frequently as necessary. Under this condition, the size of the log files should be large enough to avoid additional checkpointing due to under sized log files.
The redo logfile sizing advisory is specified by column optimal_logfile_size of v$instance_recovery. This feature require setting the parameter "fast_start_mttr_target" for the advisory to take effect and populate the column optimal_logfile_size.
Also you can obtain redo sizing advice on the Redo Log Groups page of Oracle Enterprise Manager Database Control.
To enable automatic checkpoint tuning, unset FAST_START_MTTR_TARGET or set it to a nonzero value(This is measured in seconds and by default, this feature is not enabled, because FAST_START_MTTR_TARGET has a default value of 0). If you set this parameter to zero this feature will be disabled. When you enable fast-start checkpointing, remove or disable(set to 0) the following initialization parameters:
- LOG_CHECKPOINT_INTERVAL
- LOG_CHECKPOINT_TIMEOUT
- FAST_START_IO_TARGET
Enabling fast-start checkpointing can be done statically using the initialization files or dynamically using -
SQL> alter system set FAST_START_MTTR_TARGET=10;
Best regards.

Not able to create log files using logging API's

Hi All,
I am trying to make use of logging API's of SAP in my standalone java project.
Below is the following line of code.
public class TestLog {
private static final com.sap.tc.logging.Location logger = com.sap.tc.logging.Location.getLocation(testLog.class);
static
logger.setEffectiveSeverity(Severity.INFO);
// logger.addLog(new ConsoleLog());
logger.addLog(new FileLog("C://temp//testOutput.log", new ListFormatter()));
public static void main(String[] args) {
writeLog();
public static void writeLog()
logger.entering("entering");
logger.debugT("In Write Log");
logger.exiting("exiting");
But the above codes does not create the testOutput.log file in the dir which i have mentioned . I have added sap.comtcloggingjavaimpl.jar from eclipse plugin folder to make use of these API's .
Could you please help me on this .
Thanks & Regards,
Mitul Adhia.

Hi,
Also try adjusting the severity level in nwa(Netweaver Administrator).
1. Go to http://<host-name>:<port-number>/nwa
2. Select Problem Management from tabs.
3. In that select Logs and Traces tab.
4. Select Log configuration
5. in Show select Tracing Locations
6. Select your application and set the severity to be the one lower than that you specify in your code.
Hope it helps.
Regards,
Srinivasan Subbiah

Previous Photos In Messages Not Showing (Blue Question Mark)

Previous Photos In Messages Not Showing (Blue Question Mark)
iPhone 4s, updated to iOS 8.1.1, and now previous photos in messages (imessage & text) show as blue question mark.
Not viewable in details (view) either. However any new photos sent or received are viewable. PLEASE HELP!!!
(MMS is turned on & over 5GB of free space on phone)

I have the same issue. Does anybody know how to fix it?
It is really annoying... I chose iphone to be ensure about functionality and stability of this product.
Any help appreciated.
IOS. 8.1.1 iphone 5s

Cs6 bridge not showing thumbnails for raw file

Just upgraded to CS6
cs6 bridge not showing thumbnails for raw files.
Can see thumbnails in CS5.1 bridge and LR 4.2 which fortunately i did not uninstall.
Bummer since I am up against a hard deadline.
Really Sucks

We can't know. You are not offering any system information or e.g. info about what image files you are working with. Since they do show up in your otehr programs, my assumption would be that you need to switch the Camera Raw engine back to the 2009/2010 version in Photoshop and not use the default new 2012 one. Perhaps your thumbnails will appear then....
Mylenium

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

I recently purchased a movie on i tunes which is not showing in my purchased file. I downloaded it on my ipad but cannot see the file on I tunes. Ipad lost so trying to retrieve a movie file. Any ideas please?

The movie will only be where you put it.
However,in some countries you can redownload some movies:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Learn more about which content types are supported for iTunes in the Cloud by country, as well as where iTunes Match is available.

The burn command does not show in the iTunes file. I recently upgraded to Yosemite. How do I retrieve the burn function? thanks

Have Macbook late 2009
2 GB
iOS 10.10.2 (recent,y upgraded)
The 'burn to disc' function does not show in the iTunes 'file'.
How can I restore this feature?
thanks

Where are you looking for the "Burn"?
You should be seeing it, when you select a playlist or a smart playlist in the sidebar and then use the command "File > Burn Playlist to ..." or ctrl-click or right click the playlist and select the Burn command from the pop-up menu.
Does it not show there?

TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

OSX Messages Not showing "My" Contact Pics

OSX Messages Not Showing "My" Contact Pics
But My contacts app can showing my contact pics.
So I send the messages to "My"
1. Messages Automatic change @me.com and @icloud.com
2. @me.com can't Showing "My" Contact Pics
3. @icloud.com can Showing "My" Contact Pics
4. But My Right Contact Pics, always can't showing "My" Contact Pics.

Messages isn't using the picture from the contacts app. You can set a user picture under "Messages" > "Change My Picture".

HT5622 Messages not showing up on my iPad?

Why are the messages not showing up both on my iPad and iPhone ? Please advise

Movies are not eligable for iTunes match, it s just music and music video, the 'add to iClouyd' option is a generic entry in the list, Apple should really have removed it when it applies to movies.

LR4.3 does not show previously imported CR2 files (5D mark III) by trial version

LR4.3 does not show previously imported CR2 files taken using 5D mark III by trial version.
When tried to synchronize the files not show when browsing, the import window comes up. All the Jpeg files, Raw files are seen in the window. None of them are highlighted nor selectable. LR is assuming that those files are already imported but if imported they are being shown for browsing or editing

Maybe you have set a Filter in LR. Press Ctrl-L once or twice to turn it off.
Maybe you don't have "All Photographs" selected in the Catalog Panel on the left.

Messages not showing up in log files

Similar Messages

Maybe you are looking for