Messages Not Visible in SXMB_MONI

Dear All,
Now i am doing one file to file scenerio. The file is getting deleted from the source directory but not reaching the target directory. Also, when i am seeing in  SXMB_MONI, there is no messages in that. And in the Adapter Monitoring, Source Adapter(File) is specifying that one message is processed but Target Adapter(File) is telling that "no message processing until now".
Please help me to solve this problem.
thanks in advance.
nishu

Hi Nishu,
  Go to Runtime Work Bench(RWB) and select Message Monitoring. There select your message by specifying the appropriate date.
Click on the message details to get a detailed view of what happened to your message.
Send us the msg details for  more help.
Regards,
Jai Shankar.

Similar Messages

  • Message not seen in SXMB_MONI

    Hello Experts,
    We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
    When Material is sent using  transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
    But the corresponding message is not visible in SXMB_MONI of PI.
    Please help!
    Thanks in advance,
    Suraj

    Hello Prateek,
    Yes it is showing stuck in SM58 with status '::000'
    If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
    We cannot understand what this status means or how to resolve it.
    Please help!
    Regards,
    Suraj

  • RFC to File scenario.. Messages not available in sxmb_moni

    Hi Experts,
    I have created simple RFC to File scenario in my sandbox system.  First time I am doing this type of scenario.
    When I execute the program which is created to call the RFC Function Module nothing is coming into sxmb_moni in sap system as well as in PI system.  I don't know why messages is not coming to sxmb_moni.
    Please suggest me how to resolve this issue.
    Thanks & Regards,
    Satish Kumar P.

    Hi Satish,
    first monitor  Sender RFC channel in communciation channel monitroing ,after executing program in ECC if BAPI triggered then definely you will see log in RFC sender channel.
    if nothing was found then prob in ECC side like Pogram triggered BAPI.
    Regards,
    Raj

  • Instant messages NOT VISIBLE on one computer

    When someone instant messages me (I can see the little pencil writing), the message is not visible on my PC.  Oddly, the message IS visible on my Mac.  I must have made some strange alteration in my settings so that messages aren't visible.  How did I do it and what do I do?  Many thanks in advance.   Ken

    I imagine you have more than likely changed your text colour(color) to white. 
    I have not been able to reproduce your issue in tools>options.
    This is very similar to another thread thoug:
    http://community.skype.com/t5/Hardware/IM-Skype-Not-Displaying-Messages/td-p/157730
    I recommend following those instructions.

  • Unread messages not visible.

    New user of Macs - about a fortnight, and having issues, not so much with using the MacBook, but trying to work out why and where to find things. Latest issue which started this morning is on downloading messages from my POP3 account, I get 3 unread messages, but not visible anywhere. I read through the other discussions and checked my mail folder in library and found the messages, which were legit, not spam. Moved them to trash and checked the count on the inbox and they had gone. Later in the day i logged in again and have a similar message of x messages, 3 unread - mail folder in the library has different messages this time. Also with the unread messages comes (but not always) and blank header - so there is a dot in the first column to indicate a new message but the remainder of the line is blank, and the preview pane tells me to go to the server to read the message - however there is nothing in webmail server, inbox is empty since it has all been downloaded to MacBook.
    Any thoughts or hints?

    The problem is probably that the mailbox has lost the .mbox suffix in the filesystem, but you appear to have introduced new issues by tinkering with the contents of ~/Library/Mail/ without taking the index into consideration...
    Report the names of the files and folders present at the first level of the ~/Library/Mail/POP-username@mailserver/ account folder in the Finder.
    In order to post the exact file names and avoid typing mistakes, proceed as follows. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. With that folder open, if you’re looking at it in View > as List mode, first collapse any expanded folders so that the Finder only shows the files and folders at the first level. Now, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • New mail messages not visible--"detected corrupt database" related?

    I am using Mail.app and an iPod Touch with an Exchange server (Intermedia). All of a sudden in the last few days, recent mail on the server is not visible using Mail.app or the iPod Touch. I have deleted the mail accounts on both devices twice and done an entirely fresh download of all mail on both, and the problem persists.
    Mail in the Inbox is visible. However, if I move an Inbox message to, say, Archive or Travel, then it becomes invisible--even though it is intact on the server and in its proper location there.
    I have also repaired permissions and run sudo daily/weekly/monthly maintenance processes, to no avail.
    In the console, I see the following error message. Could this be related and is there a way to fix it?
    Jul 17 11:14:36 xxx-xxxx-macbook Mail[108]: ISyncDataDirectoryCorruptedException: detected corrupt database while executing delete from Record
    Thanks for any help.
    Message was edited by: RKNYC

    Update: all messages are viewable in Entourage Exchange Web Services 2008, but not in Apple Mail, or in Mail on my iPod Touch, or after a new download of all mail on another Mac in Mail.app. Why is Entourage able to see all the messages while all the Apple Mail clients are missing them?

  • Opened mail messages not visible on screen

    all of a sudden, when I open a mail message from my inbox, or any other mailbox, the message opens up on the top left side of my screen, but is only partially visible. I am unable to drag the message back into the center of the screen. Although I can click on and drag the bottom, right hand corner, that only increases the size of the message window, but does not unhide the rest of the message and the message header from the top, right hand side.
    additionally, when I click on mail preferences, or about mail, the related info is no longer visible on the screen.
    The mail inbox however, is fully visible.
    thanks for any help with this.
    neil

    quit Mail and start it again. is it still doing this? if so your Mail preferences are likely corrupt. quit Mail and delete (or move to the desktop) the file ~/library/preferences/com.apple.mail.plist. ~ means your home directory. you can get to it by clicking on the house icon in the sidebar of any finder window or by going to /users/username.
    then start Mail. you'll have to recreate all your email accounts so make sure you know all their settings. once recreated they will recognize their existing mailboxes. see if Mail behaves after that.
    Alternatively, if you have a backup, restore com.apple.mail.plist from backup from before the problems with Mail started. Mail should not be running when you do this.

  • Messages not appearing in SXMB_MONI

    Hi All
    I am working on SOAP Sender and RFC Receiver scenorio.
    I did all the configurations in the XI and tested the same using Altova XML Spy tool.
    It is working fine and the data is also getting posted in SAP.
    But i am not able to see the processed XML messages using SXMB_MONI.
    Can you pls help on this
    Regards
    Madhan D

    Hi,
    Goto SXMB_ADMIN->Integration engine configuration-Specific parameters and select RUNTIME-->logging_sync to 1 by default it is 0.
    Thanks!

  • Message not visible in RWB ? ...But able to run the scenario ?

    Hi Experts
        I am XI learner...and problem is for File to File scenario, I done every thing and
        receiver side i am able to see the message. But problem is i want see the 
        message in different stages ? but RWB nothing is visible(<u><b>SXI_MONITOR</b></u>)..!!!    Any settings i need  to do for this ?
    Adv..thanks and regards
    Rakesh

    just try with these:
    SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
    Create entries:
    RUNTIME LOGGING 1
    RUNTIME TRACE_LEVEL 3
    also check with <a href="http://Unable to see any message in sxmb_moni.">this thread</a>

  • Message Not comming into SXMB_MONI

    Hi Friends,
    I am doing File - idoc Scenario.
    My Sender File adatper is picking source file successfully.
    But, when i see in the SXMB_MONI, message is not showing in to the   SXMB_MONI.
    when check my Communication Chennel in RWB, its showing Warning like below
    "Message Found Empty".
      Please anyone tell me what is the problem.
       Regards,
       Vijaya

    Hi Vijaya
    Please look this link.
    /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    https://www.sdn.sap.com/irj/sdn/weblogs?
    blog=/pub/wlg/1629.
    hope this will help u ....

  • Service Desk messages not visible with SAP_SUPPDESK_ADMIN Role

    Hi,
    We are configuring Service Desk in Solution Manager 7.0 Ehp1.
    I am able to see the support messages from the user 'BASIS' with SAP_ALL authorization.
    There is another user 'X'. Here User 'X' has following Roles - SAP_SUPPDESK_ADMIN, SAP_SUPPDESK_CREATE, SAP_SUPPDESK_PROCESS, SAP_SUPPDESK_DISPLAY, SAP_SUPPCF_ADMIN, SAP_SUPPCF_PROCESS, SAP_SUPPCF_DISP.
    After this I set the message processor  to be user 'X'.
    Now when I try to see the message with T-code: crm_dno_monitor, it is not displaying any messages.
    But as per the Solman Security Guide, SAP_SUPPDESK_ADMIN and SAP_SUPPCF_ADMIN are master roles for Service Desk.
    Please help in resolving the issue.

    Hi,
    Do you mean you logon to the system as user X, and create a test message under user X, and not able to see the message
    created ?
    Are you able to see in SOLMAN_WORKCENTER ?
    Regards,
    Vincent

  • BPM: SendContext not visible in SXMB_MONI DynamicConfiguration

    Hi everybody,
    I set a sendContext in a  sendStep in BPM.
    AFAIK in SXMB_MONI the value of the sendContext could be seen in SXMB_MONI under DynamicConfiguration.
    But I cant see it although the sentStep is processed.
    But I can see is in SXMB_MONI_BPE under SENDCONTEXT.
    What is wrong?
    The correspondinding entry in condition editor for receiver-Determination is "ProcessStep"? Isn't it?
    Regards Mario

    Hi All,
    Thanks a lot.
    But my problem still remains.Let me detail out the settings I have followed.
    In the Sender System.
    1.WE20(Partner Profiles):Maintained Outbound Parameters for the Logical System name of the <b>Receiver</b> as mentioned in SLD.
    2.WE21(Port)
    3.SM59(Connection to XI)
    In XI
    1.IDX1
    2.IDX2
    3.IR
    4.ID
    SLD
    1.Logical system name for the Sender System
    2.Logical system name for the Receiver System
    I have checked in Transaction SM58 of the Sender System.
    However I do not see any error there.There is no list created, which means that IDoc has left the Sending System ,So is there a possibility that there a problem with the IDoc Adapter.
    If so then how do I solve it?
    Kindly help me.
    Thanks & Regards,
    Vanita.

  • Payload is not visible in sxmb_moni

    Hi friends,
    when i send payload from RWB, i am getting success in RWB but when i see that payload in sxmb_moni, i could not see my payload in main document ..only in attachment i could see that paylad.
    could you give some idea what could be cause for that?
    thanks
    raja

    Hi,
    That link is not much useful to me (I mean all the settings for fine in sxmb_adm..that i checked already)
    for more info: I am using SOAP adapter as a sender and receiver is R3
    Thanks
    Raja
    Edited by: Raja on Apr 15, 2008 10:47 AM

  • Outbound payload not visible in sxmb_moni

    Hello Guru's,
    I have a issue in message monitoring (sxmb_moni). I can't see the outbound payload for the most interfaces.
    Do I have to set a parameter somewhere? Does anyone has any suggestion?
    Kind regards,
    Kamran

    Hi people,
    Thank you for your replies.
    Im going to set those parameters to 1 cuz in our system it had a value of 0.
    This goes for all of the messages synchronous and asynchronous. Is there a difference between if we have a asynchronous interface?
    Kind regards
    Kamran

  • New messages not visible in Mail

    I use Mail for all of my gmail accounts. Recently I noticed that there were no new messages appearing in the Inbox for my principle, general purpose gmail account. Furthermore, the circular array of 'rotating' grey rectangles at the right hand side of the mailboxes pane is continuously active - I understand this to mean that mail is being 'received'.
    There is certainly activity and Mail is successfully logging in to the gmail mail server, but no new messages are appearing in the Inbox.
    I have a large number of rules on this Mailbox, but I have deactivated the rules - there is no discernible difference, and I have checked in the local mailboxes that these rules were moving messages to - no new messages there either.
    Because the source is a gmail account, I thought to simply delete the account from Mail and start again, but it appears that I cannot even do that. Any suggestions would be gratefully received.
    Regards.
    Neil

    I thought to simply delete the account from Mail and start again, *but it appears that I cannot even do that.*
    Why not? What is stopping you from doing so?
    Try the Mail "rebuild" setting - Mail/Mailbox/Rebuild
    Message was edited by: CMCSK

Maybe you are looking for