Messages not working properly, conversations not syncing

Macbook Pro 15" Mid-2010, Mac OS 10.10.1; iPhone 4S, iOS 7.0.0, Messages
When I receive an iMessage on my iPhone, the message is successfully pushed to my Mac and I get a notification in Notification Center. That's fine. However, when I launch Messages either by clicking the notification when it appears or by opening the app, no conversations appear (window displays "no conversations selected") and after a while it just leaves me with a blank window and only minimize / fullscreen enabled. The majority of options on the dropdown menus are also greyed out.
Considering that the messages themselves are successfully getting pushed to my Mac, I don't think it's an account issue. It seems as though the app is getting hung up trying to load up my conversations.
Any ideas as to what's going on? I originally had this issue on 10.10.0 so I thought that it may have been a bug and updated to 10.10.1. It only started happening a few days ago, I've been running Mac OS 10.10.X since several days after launch with no issues.

Hi,
In the Font Book app it does not appear alphabetically and is well down the list.
In my list there are only four fonts below it.
You can also check the Folder it is supposed to be in Manually.
Open the Hard Drive icon on the Desktop then /Library/Fonts
This is an unusual place for a "required" Font  which normally are found in Hard Drive Name/System/Library/Fonts
It will be easier to reinstall the OS if it is Missing.
7:12 pm      Wednesday; December 10, 2014
​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • My iphone 5 does not work properly with Ford Sync,

    Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
    Can someone help.

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • Button is not working properly- why not?

    Hello Everyone!
    I have searched the forums for the answer for my question, and I have read the "read this before you post" information, and I can't find the answer to my issue/question.
    I have a Captivate 4 project I have started, and I have inserted buttons on the slides (pretty basic task!). My issue is that the buttons I put on slides don't work 25% of the time. For example, I have a slide with a "next" button. I made sure to set the button up to "continue to next slide" when clicked. I go to view the project, and click "next" and nothing. *Sigh*
    Then on another slide, I have put a transparent button over an image. I click on the transparent button over the image and nothing. It does nothing. I have saved the project, closed it, reopened it, and the buttons still don't work.
    I recheck the properties of the buttons, and everything seems to be configured properly, but yet they do not work. Very frustrating. I can get most of my buttons to work properly, but randomly buttons are not working. What am I missing here?
    Otherwise, I have Captivate 4, and my company probably won't be upgrading to Captivate 5.5. After reading how Captivate 4 projects won't open in Captivate 5.5, I'm fine with that decision. We have too many projects created in Captivate 4, to not be able to open them with 5.
    Thanks for the help anyone can provide me!
    Karen

    Hello again
    Okay, here is a trip up spot. When you configured your button or click box, did you also maybe clear the "Visible" check box? Many users misunderstand that beastie and clear it thinking "well, I don't want the user to see the button or click box".
    Clearing it is a misguided attempt. The option is used when you wish to control things using Advanced Actions.
    Also, is there a question slide between where you are and where you want to be? If so, sometimes your Quiz settings will prohibit jumping to a slide beyond the unanswered question.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Gmail is not working properly. gchat not loading. cannot write emails.

    gchat won't load. when I click on box to write email, nothing will write. when I click on "settings" I get a "Loading" message. everything works fine using IE or Chrome. Gmail works fine using standard html

    Any external USB CD/DVD drive will be compatible with your laptop.
    However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
    So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

  • Poster Frame and Trim Mode not working properly with post-synced clips

    Hi Everyone-
    Final Cut Pro seems to be doing something really odd and I'm wondering if anyone else has experienced it and if so what is the fix:
    We are shooting a movie on Red with sound coming in on multitrack wav files. We downconvert the R3D files to Prores and then manually sync the tracks in the timeline.
    We link the pix and sound and drag them to the bin to make our dailies. They all play, in sync. When we try to set a poster frame the issues begin. If I load the clip into the browser park the playhead on a frame and choose poster frame, the actual frame in the bin is very noticably offset (often by a few seconds).
    Also, when I use the trim mode, the frames jump to a different part of the shot during trim. It's like the shot is jumping ahead or back while I hit the frame advance or recede buttons. Once I let go of the button the image jumps to the correct number of frames. But, it's very distracting if I am trying to trim, for example, to just before an actor blinks. I can't trim 1 frame at a time. I have to keep hitting the button, watching the picture jump to a different part of the shot, release the trim button and watch the picture jump back to the now correctly trimmed frame...
    As a test I took some of the Prores clips with scratch track sound and brought them into the bin directly from the finder, bypassing the syncing. Using those clips, the trim and poster frames work as expected. Obviously something is going on during syncing.
    I assumed maybe because the audio and pix we different lengths the clip was getting "confused", and didn't know where to "start". So, in the timeline with the synced clips, I razor bladed a few shots, linked them, and dragged them to the bin so the audio and video were the exact same length... Same issue.
    I have noticed the same behavior on 2 separate Macs so I don't think its a preference or corrupted install issue.
    Anyone seen this and have any suggestions?
    Thanks,
    David

    Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
    Tim

  • Help! Slideshow feature in Elements 13 not working properly: Won't sync photos to music

    Hi. I'm a photographer who recently updated my Photoshop Elements 11 to the new and "improved" 13. I upgraded specifically for the new advertised slideshow feature. I make these as a fun way to share Wedding Sneak Peeks with my Brides. But when I add photos to the slideshow and add a custom song, then click "Sync photos to music" a box pops up telling me it's working but then nothing ever happens. I can't even click back or cancel the operation. It freezes the entire program and forces me to shut down my computer. Please help! Am I doing something wrong here or is this a bug within the program?

    I've also tried the following:
    - rebuilding iPhoto's Library
    - deleting the "iPod Photo Cache"
    - resetting the sync history
    ... and this all didn't help at all.

  • My cd/dvd drive not working properly will not read a recently burnt cd

    When i burn a cd it says that i have inserted a blank cd

    Lenses inside the drive can be dirty as well.
    BestBuy/Walmart carry "drive cleaning" kits ... a special disk that you load with cleaning solution is inserted into the drive, then ejected after running it for a minute or two.

  • Adobe is not working properly not able to view videos or games

    adobe flash player not working properly and not able to view videos or games

    Welcome to the Adobe Forums.
    The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
        •    Adobe product and version number
        •    Operating system and version number
        •    Browser and version number (where applicable)
        •    The full text of any error message(s)
        •    What you were doing when the problem occurred
        •    Screenshots of the problem (if possible)
        •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion. I am facing following messages.

    Hello Team,
    I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
    Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
    I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
    Process:         iTunes [463]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.7 (10.7)
    Build Info:      iTunes-10702101~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    Date/Time:       2012-10-22 23:33:07.226 +0200
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          4918 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      3DE933E2-7A48-4840-91F4-7DC466ED9C26
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x102a96000 -        0x103c36fff  com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff62696000 -     0x7fff626cb1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-867
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x1d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
    In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
    Eagerly waiting for your response on this issue.
    Best Regards,

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • My mail on iMac is not working properly. Click on email, it hangs, showing previous email. Takes forever to load. "No message selected" showing in a blank screen

    My mail is not working properly: when I click on an email it hangs, frequently showing the previous email, often for up to a minute. Or it shows "loading" and just sits there showing nothing. OR there is a blank screen saying "no message selected". It's slow to load, and I'm not happy. Recently switched from Windows PC, not impressed so far. Very frustrating.
    Any suggestions would be gratefully received. (I upgraded to Mountain LIon, and don't think I had problems before I did so, though I hadn't had the computer for long.)

    Hi Sarah,
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?          When will iTunes come to Ubuntu

    I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
    When will iTunes come to Ubuntu?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • Applemobiledevice not working properly message

    Just downloaded the latest itunes. Every time I open itunes there's an "apple mobile device not working properly" message that continually pops up and it won't stop. I use Vista and have no clue how to stop it. Can anyone help?

    Take a look here:
    http://discussions.apple.com/ann.jspa?annID=640
    Selective startup info:
    http://support.microsoft.com/kb/310560
    Hope that helps.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.

    Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
    When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
    I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
    Regards,
    JAD

    Hi Sydness,
    Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
    Charles
    Sydness wrote:
    I reset my SyncServices and the calendar sync worked perfectly after that.
    I followed the instructions found here:
    http://support.apple.com/kb/TS1627?viewlocale=en_US
    Mac OS 10.7.1 - MacBook

  • Message ShortCut Key not working properly

    Hellow every one, guys i am encountrying a problem regarding my nokia e5 , i've just bought it recently and still left with 8 months warranty. The problem i am facing is, the message shortcut key which is on the keypad of this Phone, is not working properly. When i do long press to open new text msg, it sometimes doesnt opens any thing and sometimes even open messaging and then close it. At a certain angle i have to apply  a little more force in order to operate it properly. Please help me wheather its a hardware problem or any sort of dust particles have emerged inside the keypad resulting in loose contact of the button and the motherboard.
    REPLY ASAP.

    Hi Shanam,
    Welcome to the forum
    Thanks  for joining the community, if you believe there is an issue with your device that is preventing you  from optimizing all the options available to you.
     I would advise for you to bring/ or send it for repair. Keep  sending us your replies and comments on the forum.
    Kind regards.
    Carl
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

Maybe you are looking for