Messages problem .. 5800 software ver. 20.0.012
hello every body ..
i hd updated my phone to latest version 20.0.012 .. current i can't open message right now
please how can i fix this
thanks in advance and best regards ,
alz3abi
Hey alz3abi, I'm having the same problem...
Did you fix it? I find that if I do a hard reset (RED + GREEN + Camera while booting up) it's solved... but I lose all data obviously.
It's happened 2 times to me, both of them I had a Gmail Inbox set up... This time I'm not going to set up the Gmail account, maybe that was the cause...
Did you have an email account set too?
Similar Messages
-
5800 Software update V20.0.012
I updated my Nokia 5800 with V20.0.012 (Custom Version 20.0.012.217.06). The dictionary and search facility have not installed. Any advice would be most welcome.
Solved!
Go to Solution.When installing an other application via nokia suite, the dictionary and search facility magically appeared!
-
I bought my cell phone about three months ago, and everything has been working perfectly by now. However, about 4 days ago, I started having problems with software: every time I try to access messaging from the main menu, nothing happens; and this same situation occurs when I tried to read a message right after receiving it.
The thing is I can not access my messages from the cell phone, and it includes all the messaging section, I just can not access, and I don't understand what is going on. Could some one help me on this? Thanks.Did you install anything new recently? Are all the other apps working and is Messaging the only issue? You can try a few things:
Turn the phone off and then on again
Try a soft reset
Try a hard reset
Note about suggestion 2 & 3 (you can find the codes to do this in several posts in the forums) make sure you have backups of all important data on the phone! You may lose information in the process.
Lumia 920, Lumia 800
Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428 -
When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I have trouble downloading iTunes software and related software like the new ios8 on both my desktop--Windows 7, and my laptop--Windows Vista, because I keep getting error messages saying the software has been deleted because invalid signature. I have tried download and install and I have tried just download, but neither method works. So I am stuck with the older software and my new iPad 2 Air isn't connecting because I need ios8 apparently.
I have an iPhone 5 and a new iPad 2 Air.
How to get around the Windows problem, please?
Thank you!bump
-
5800 software not updated properly
Hi all,
I have a question on 5800 software update.Will software update through NSU formats all the data including messages, contacts and applications.Yesterday i updated my device software but, all the contacts messages and applications are remain in the phone.And when i open search web and my content it saying system error.Again i updated device software still i there is no change in both the cases.Can any one help me on this.?Hi Everyone,
I just update my Nokia 5800 firmware ver 10.0.010 to ver 20.0.012, I noticed that some extra applications got change, also I now can use my second camera, but one thing still a same problem is switch on/off, sometimes is blank, I have to switch it on/off many times to get my phone ready to use.
Is anyone has a same problem and already found the way to fix it up?
Thanks. -
Nokia 5800 software update (from V31.0.101 to V40....
Does anybody works for Nokia here? I'm still hopeful to get real answers from real Nokia Support employees.
This is my post so far. An I also responded on the I hate my Nokia 5800. But I dont really hate it yet. I jus need the sotware to update.
Hi Nokia!
I purchased your Nokia 5800 Xpress Music mobile phone and I am trying to update the software/driver to improve 1: Touch Screen scrolling, 2: version of OviMaps, 3: Ovi Contacts, 4: SW application, and 5: WLAN performance.
I called technical support for mobile phones, unfortunately it is unavailable according to the recording, i've waited for thinking its a wrong message, but nothing happened the call dropped after the message.
The current software version is V31.0.101 and it does not upgrade. I have tried using my phone options to upgrade/update the software, this did not work, i have tried using the Nokia Software Updater but it can not find the new version of the software, and I have tried searching for the new software version by using my phone code under the battery and still it can not find the new software version.
I need help on resolving this issue.
I hope to hear from you soon.
Have a good one.
Cheers!
03/02/2010
Done all the reset and the reinstallation oof firmware.
NOKIA 5800
Mobile Issues
The phone touch screen is not very responsive.
Limited setting/shortcut you can set on the main screen.
Alarm is inconsistent. Sometimes it’s late.
Clock settings/time zone is not working properly.
The charger port on the phone is a bit loose. Charging gets interrupted even if there is only little movement.
Option is to update NOKIAs 5800 software. Current version is V31.0.101, the latest version is V40.0.005.
Nokia PC Suite / Nokia Software Updater cannot find the update
Tried to use the mobiles code, still cannot find the update
My mate has the same mobile NOKIA 5800 on a Virgin Mobile plan; he was able to update the software. I got images of his phone and my phone with different versions, mine was the old version his got the new 40.0.005 His mate has the same phone as well, which they manage to update the software. He tried helping me update the software, but ended up unable to update the software and got frustrated.
Option is to speak with TeleChoice Barrack Street. After TeleChoice checked the phone why it will not upgrade they suggested having the phone serviced/checked by Nokia Care in Morley.
I let Nokia have a look at the mobile/issue, they told me they will be able to update the software for me, I left my mobile with them, and after 3 business days and the going back and forth to Nokia, and they were unable to update the software. Very sadly, they said it’s being locked by Optus.
I am using 3 as my provider, the mobile I bought it outright from TeleChoice, no plan whatsoever. So I don’t understand why Nokia said it is being locked by Optus.
The option provided for me is to patiently wait for updates, which is available now or to return the product.
Now I am processing a replacement of the device from TeleChoice 10/02/03, hoping to have the issue rectified. They should rectify this, or there will be a violation againts fair trading.
Attachments:
Image029.jpg 206 KBActually, it has nothing to do with locking to their network. That's a totally different problem altogether that's independent from the branding.
What's happening here is altering the firmware so that it contains Three's logo and links to some of their services in the menu. Plus maybe a few alterations to maintain compatibility with the network, although they should be minor since unbranded phones will work on Three.
The trouble with making these alterations to updated firmware is that it takes time and therefore money to do it, and they get nothing in return. That's why it's such a low priority for network operators to approve updates.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Problems with software the update with Nokia 6233
Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AMIt sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
"Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you.
Prior to updating flash player, you must first uninstall all previous versions. Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
Flash Player Uninstaller
Repair permissions and restart your computer after the installations. -
Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I get message, Problem scanning. Something went wrong. Please try again.
My printer was working fine when scanning, but now I get a message:
Problem scanning. Something went wrong. Please try again. I turned my printer off, rebooted my computer...updated the printer from hp website...but nothing. I can see the document in preview, and I hear the scanner working. HELP!!Hey there @leandermw , Welcome to the HP Forums
I understand you're having scanning problem with your Deskjet 2540, on Windows 8.1 and would like to help you.
I would first suggest that you run the Print and Scan Doctor, and choose "fix scanning" to see if the tool can correct the issue. Send me the results in your reply as well.
If you have the printer connected to a network, either wireless or ethernet, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try scanning.
You can also power reset the printer itself:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Try scanning from the HP scan software on your computer, and also make a copy from the front of the printer.
Write me back with the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
When I try to restor my ipad mini I get the error message "Te ipad software update server could not be contacted. You do not have enough access privleges for this operation." Please help!!
I also have same problem i dont knw what to do ???????????????? have u got any solution >>????
-
I am trying to add my brother printer series HL-2270DW, but I keep getting an error message that the software is currently unavailable. How do I fix this?
I am also having this same problem. I have updated my computer. I have downloaded the complete brother driver package from Apple as well as the drivers from Brother. As far as I can tell, all have been installed successfully. It is only when I try to ADD the printer do I get that message. Both my roomate and I have Macbook Airs so we cant use the disk which came with the printer. This is irrelivant anyway as the drivers have been successfully downloaded and installed. SO FRUSTRATING!!!!!
-
Many problems with software activation with software purchased online
All:
In the last few weeks, I have had a lot of problems with software activation.
I purchased 10 copies of Office. 5 would not activate. I took the software back to the local as suggested by customer service, but was denied an exchange.
I purchased 7 copies of Adobe Photoshop elements. 3 activated, the rest did not.
What is going on? Can I get these replaced, refunded, or activated?
Thanks.Greetings captainkeys,
That’s quite the amount of software to purchase! I’m sure you were quite disappointed to find that not all of the software codes seemed to be activated, delaying your use of the software. I’m glad you’ve reached out to us in multiple ways to see what options are available to you, and I apologize if we have been unable to find a resolution for you.
Using the email address you registered with the forum, I was only able to locate eight copies of Microsoft Office, and couldn’t locate any copies of the Adobe Photoshop Elements. That being said, I was able to see that some of the codes did fail to process through the activation process. I would be happy to look into getting these activated for you.
That being said, I am sending you a private message to gather further information from you. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?
This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).
Maybe you are looking for
-
Has anyone tried to import video into iMovie from a DSLR camera? I can't get it to work
My problem is simple.... as should be the answer! I recently tried to import video from a dslr into iMovie but all I get is rubbish. What am I doing wrong? HELP!
-
i am use iphone 4s i have upgrade ios 8.1 i have problem in ios 8.1 pls guide me how to restore 7.1 ios pls guide
-
Query with LIKE to find strikethrough characters
Can I use a SELECT-FROM-WHERE-LIKE query to find cells in an excel spreadsheet that contain strikethrough characters ? Thank you very much ! - BOB -
-
Huge latency in data acquisition
I have a datalogging system of approx 120 channels and am experiencing a latency in the results of around 4-5 seconds in the data (this can be seen on screen and when analysing results). Being rather new at this I would welcome any suggestions on mis
-
Please let me know how to use ++HLN text CVR command in sapscript
Hi, does any one know how this ++HLN number CVR command need to implement in sapscript? Regards, Challa.