Messages Scheduled in moni

Hi All,
We came across an issue in Moni regarding Master Data Interfaces. The issue is as follows
Sender: ECC
sender adapter: Idoc
Receiver: WMS systems.
Receiver adapter: JMS
Whenever we receive a bulk load for master data interfaces these messages were scheduled for processing in queue’s. Some of these scheduled messages were struck in scheduled state in moni. When we check the respective queue’s there no entries for that particular queue’s.
The issue is occurring frequently whenever we receive bulk load for Master Data. In the EWA report this is mentioned as the “Queue entries are deleted manually” but we never delete these entries.
could you please suggest on this.
Thanks,
Seshu.

Hi Botha,
Issue: I have found some messages in schedule status in moni. when I selected one message inbound queue from moni, it's showing 0 messages in SMQ2 queue. I didn't find the message in queue but it's showing in moni. I am attaching the screen shots for your reference please check it and let me know if you have any concerns.
Thanks,
Seshu.

Similar Messages

BPM Mapping scheduled status in SXI_MONITOR Message scheduled on outbound

Hi All,
Please help me how can i solve following issue.
My Scenario WebService - PI - Proxy.
One of the message gets an error in the moni. where I get an green flag 'Message Scheduled on the outbound side".
The design was working fine earlier. It is giving problem now.
I tried following options:
1) I tested the mapping - it is working fine.
2) I checked Cache - the status is fine.
3) I checked Inbound queue(SMQ2) there are no messages stucked in the queues or saved in (smq3). Here i am using EOIO.
4) I checked SWWL - there are message with COMPLETED and STARTED but there are not ERROR messages.
Could any one please tell me - Can i DELETE - COMPLETED messages from SWWL? If i delete what is going to happen.
Please advice
Thanks
VR

Hi,
In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed
Also suggesting to check both the Queues....SMQ1 and SMQ2.....
delete an instance from SWWL only if it is in error state.....
regards,
Abhishek.

SXMB_MONI - Message scheduled on outbound side (no queues)

Hi All,
I currently have a problem on one of our XI systems.
In SXMB_MONI all the process messages have the outbound status of "Message scheduled on outbound side" (green flag). The interface is going into a BPM process.
There is nothing in the QRFC-Monitor or in the tRFC - SM58.
I have already registered all the queues.
The XBQO queue for the BPM processing is not being triggered. This process used to work on this system, but has now stopped.
Any Ideas?
Thanks,
Matthew.

1. check in sxi_cache. the return code of ur IP shud be 0.
2. register q in smq2
3. anylogs seen from PE in moni?
or use from pg 46 for troublkeshooting from below link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -

XI messages status "Message scheduled on outbound side" with Green flag

Dear,
          On My XI system , i have too old messages and i want to clear those.
          In moni messages status is "Message scheduled on outbound side" with Green flag .
         When i am trying to cancel these messages i am getting a popup saying
          "Cannot cancel message because of it's status"
          And there is no queue entries for these messsage on smq1 or smq2 (perhaps deleted by someone)
          I just want to cancel these messages, please tell me if there is any way .
Thanks in Advance,
Sandeep

Dear Sunil,
                Thanks, these meesages are neither active nor used anywhere,
                Problem is somebody has manually deleted entries for these messages from SMQ1 and SMQ2.
Regards,
Sandeep

Message scheduled for outbound processing

Hi All,
We have an issue where a message is stuck in MONI in scheduled status. We checked to see if there is any stuck queues, we did not find any errors nor entries. The message has the staus "Scheduled for Outbound processing", also we can see the JOB ID (JOBnumber) with status "job not yet executed". The remaining interfaces in this landscape are working fine.
Appreciate your help!!!
Thanks,
Gunasree

Hi
We can prevent this problem through standard SAP program RSQIWKEX. This program need to execute background. Whenever any message stuck in queue automatically this problem will restart error message automatically. If you want to delete error message from queue (due to this error message remaining messages are in hold stage. for remaining message execution we need to delete error message from queue) we need to change one function in this probem.
Existing function TRFC_QIN_RESET_LUW , this function only can restart error message.
Need to add function TRFC_QIN_DELETE_LUW , this function delete error message from queue.
For this program execution we need to mentioned queue name(mandatory), find message stucking queue name and give same name to program in variant.
/people/gourav.khare2/blog/2007/12/21/mass-cancellation-of-error-messages--xi
Re: Unable to delete the messages scheduled for outbound processing
Regards
Pothana

Restart message scheduled for outbound processing

Hi,
I'm having a BPM process that collects IDocs. A lot of messages got stuck now in the status message scheduled for outbound processing. Can I manually restart these messages? What will it happen if I restart them? Will they be sent twice or just once?
Thanks in advance,
George

> I'm having a BPM process that collects IDocs. A lot of messages got stuck now in the status message scheduled for outbound processing. Can I manually restart these messages?
I think you are looking in MONI for status "Recorded for Outbound Processing" .. correct?
Just scroll towards right and then you will find the Queue ID against your message, just click on this id and see if it has got stuck in queue if yes then just process it from there.
>What will it happen if I restart them? Will they be sent twice or just once?
If you process the message it will be posted only once.
Regards,
Sarvesh

BPM Mapping error in SXI_MONITOR Message scheduled on outbound side.

When I try to process this message i get an error.
Message scheduled on outbound side.
I am using a BPM.
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Using EOIO in the send step Queue Name: cases
If I remove MI_TRANS2_BPM the message reaches the bpm, but with both transformation in the BPM the message gets an error in the queue where I get a green flag 'Message Scheduled on the outbound side"
This BPM was working on Friday but hasn't worked since. There have been no changes to the my development XI environment.
Some things that i have tried: Clearing the Queues (smq2), Redoing the entire scenario, clearing cpa cache.
Please help.
Thanks
Chirag

Hi,
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Any specific need to have the above design pattern....you can also try:
MI_Receive_BPM -> MI_TRANS_BPM -> MI_TARGET
You can use the message that you initially receive and apply all the necessary transformation on it and the map it to the target structure....
As you mentioned that if you remove MI_TRANS2_BPM your message is executed successfully...it means that the BPM transformation 2 is waiting for some event / Message....
If you need to go by the same design then you can follow the below steps to resolve the problem:
1) Check the return code of BPM in SXI_CACHE...it should be 0
2) Check for any errored instance of your BPM in SWWL (as mentioned in above posts)
3) Open the corresponding Queue and see for the messages stuck in the Queue....your Queue may be blocked....your BPM will be using a particular Queue and if any message is stuck in the Queue then all the messages that follow will get stuck in the Queue....
Now if it is only your BPM that is using this particular Queue then Delete the Queue (applicable to development environment....do not try in QA or Production environment)
4) In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed (possible only if the message has entered the BPM.
Regards,
Abhishek.

In SXMB_MONI with(Green Flag) "Message Scheduled Outbound Side" (using BPM)

Hi All,
I had a Scenario where I am using BPM (to collect the Idocs received from Sender SAP R/3 system) and create a File as target structure. But one of the entry i found as (Green Flag) with status "Message Schedule Outbound Side". But the remaining messages are processed successfuly through the same BPM.
I even found that the when i double click on the PE of the "Green flag entry". its leading to "qRFC Monitor(Inbound Queue) with empty entries" instead it should lead me to the workflows Log screen. Since other successfully messages are leading to workflow log when i double click on the PE.
Please let me know your comments on this.
Thanks,
Shailaja

Hi Gouri,
I am getting gray flag in the column (Status - XML Message Status) and green flag in Colum (C- Outbound Status). So this Greem flag itself is creating the problem, because of this itself my messages is not getting processed and not delivered to target system.
I have even checked SXI_CACHE, when i click on the Integration Process-- Right click on my BPM and select the "Activation Log" .. here a message which i had
I Language not set. Using system default E
The container element MULTI_INVOIC02 is written, but not read or exported
The container element MULTI_INVOIC02 is written, but not read or exported
So the "MULTI_INVOIC02 " is used in the Container Operation & Multimapping of my BPM. I suspect that error as taken place in doing Corelation. Do you have any comments on this. If i get any error in Corelation .. how can i debug my BPM.
Thanks,
Shailaja

Send Commit to message stuck in "Message Scheduled" status

Hello,
I generated some messages using ABAP Proxy. However, the commit work never happened in the program that created the message. Now these messages are stuck in "Message Scheduled" status. How can I push the message forward. Can I trigger a commit? If so, how?
Regards
Cerish

Hi Cerish,
Are you getting this status in the XI ? If so, go to Queue Monitor and try to activate the same.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also check the SXMB_MONI of Application System(R/3) if you have a access about is proxy message is executed or not .
If the status is restart not possible, then you need to reprocess that.
Hope this helps,
regards,
moorthy

Messages stucked in moni with queue status as "RUNNING"

Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.

Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh

Message Scheduled But is not delivered

HI
I have one large message which is broken in to smaller packets and in r3 and sent to the XI system via abap proxy . My scanario uses a BPM where i have a loop which has a correlation . I collect one message send it and then again the loop collects and sends the next message.
My problem is in SXMB_MONI out of the eight small messages one message shows a green flag (Message scheduled on the outbound side ) . It is not scheduled but not delivered from the IEngine to The PE. Rest all the message are delivered properly.
How can debug such a scenario.
regards
Nilesh Taunk

Hi,
 In SXMB_MONI, did you get a message like this as seen below:-
"Message <MessageID> parked at the process <ProcessID> but not yet processed"
 Solution:
 Check your correlation defined. Use local correlation instaed of global correlation, i.e use the correlation in your block step. This should solve the problem.
Also see the SAP Notes below:
898131 : BPE-RUN: Messages lost when processes are incorrect.
894906 : BPE-RUN: Finding unprocessed messages.
Hope this resolves the issue.
Regards,
Dhana

Message scheduled (waiting )

Hi All,
I noticed message to BPM is waiting with 'Message Scheduled on outbound side' in SXMB_MONI. I read other messages on the same error, tried to delete all the queues with /nsxmq1,nsxmq2. and re-registered,activated all the queues in sxmb_admin, still the status is not changing.
It used to work, suddenly started waiting with message - Message is scheduled on outbound side.
We investigated this issue since yesterday night, any help is appreciated.
Thanks,

Scenario is DB-XI-Mail
I sent the sender (DB) QOS to EO, and when it is sending to BPM, it is keeping in XBQO* Queue, but if you look at SXMB_ADMIN, this queue is registered/activated for EOIO.
My question is why these messages are inputing to EOIO related to QUEUE? is there configuration that we could do to force to go to EO related to queue only.
I see some settings you could prioritize by size or interface, but did not help?
IF i see technical details, in SXMB_MONi, it shows it is set to EO, but all BPM outbound messages are going to XBQO* only.
Another thing, i noticed, If i click on this queue, there are no messages, these messages are showing with green flag/clock symbol and can't be deleted, and they processed wrong messages, so it is sitting and waiting, but even i correct the problem in BPM and reactivate the BPM, it is still wating because u can't restart them aslo ?
For initial development, I think if these messages are put in EO, then i would have not run into this problems.
Thanks,
raiv

BPM : Message scheduled on the outbound side

Hi
I have messages in SXMB_MONI that have been received into my BPE. They have a status flag ok (chequered flag ) but the Outbound Status is green (message scheduled on outbound side).
The BPE would have finished by now ...been in Message Scheduled on Outbound side for the entire day now.
What has happened ? I have no error - nothing !
(there are no entries in SMQ2, nothing in SXMB_MONI_BPE in error etc etc or Short Dumps)
Please help.

I posted an OSS note on this - so answer from SAP.
Solution is to delete the old entries via RSWWWIDE report (which could also delete work items that do not have a final status.) I ran this for everything not COMPLETED.
When I send another message in - it worked fine. So the fact I had a stalled WF a week ago was affecting any new one coming in.
Drilling down into the message in SXMB_MONI from the PE I could see an Exception Handling in the MergeandSendBlock - no error given - but it did have a time of a week earlier.. anyway then in the ST22 Dump I could see wf-batch with runtime error MESSAGE_TYPE_X_TEXT.
I feel this is very poor design on the BPM processing ! oh well.
See also
#Note 836092 - Archiving/deleting work items in the XI
PS Thanks to Sudhir earlier on... You nailed it - but at that stage I did not know what you mean so did not consider this - as I had no idea what affect running that transaction would do.

SXMB_MONI: Message scheduled on outbound side

Hi,
one message sticks in the integration server. The status is "Message scheduled on outbound side". Instead of the target flag there is a green flag in the column outbound status. The queue is registerd, following messages were processed succesfully. QRFC-Monitor is empty.
If I start outbound channel monitor, I can see one entry.
If i mark the outbound entry and click "display queue entry" the following message is shown (Transaction RFC):
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077 ...
What to do?

Hi Jayakrishnan Nair,
SM58 returns one entry:
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077...
So the status is still "transaction executing"...
Now I have checked WE02 in the target system and I have found the IDOC being successfully posted 2 hours ago!
It seems that you were right, that the acknowledgement was not received by XI.
I am going to delete that entry in SM58...
Hopefully this will not happen again in the future!
Thanks to all for your help! Points rewarded.
Regards,
Christian

IDOC status "Message scheduled on outbound side"

Hi,
I am working on scenario file->XI->SAP R/3(Using IDOC). I am getting outbound status of IDOC as "Message Scheduled on Outbound side". When I go and see SM58 for user WF-BATCH there exists a entry with status Transcation Recorded". In SM58 if I manually click Execute LUW then only I am getting an IDOC posted in my R/3 box, but this should happen automatically.
Can any one tell me what should I do so that it gets executed automatically?
Thanks In Advance.
Yaseen Mahammad.

Most of the time it is because of the Queues and Logical system. I,e If there is no proper logical systems are created/maintained then it will give problem.
And it also depends on the rfc Dialog users.
Just check this thread-
Problem with IDOCS
Also check in the IDX1 entry...
Thanks,
Moorthy

Messages Scheduled in moni

Similar Messages

Maybe you are looking for