Messages sends a double invitation
I have a colleague with a MacBook Pro. He chats with messages via Wifi. He is the only one who manages to invite me with a double invitation window on screen. I can choose out of these two windows to accept and often seem to pick the wrong one. It results in a time out. A second attempt is always with one invitation screen and succeeds. Does anybody know what can cause such an odd double invitation window? Kind regards, Julius
Hi,
I take it that this is about an Audio Only or Video chat (the Text Chats don't display and invite anymore) ?
In iChat and Messages it has always been possible to get tow invites at once.
However this would be unusual and possibly one of them would be unexpected. (most people text first then tell you they will call).
As for two invites from the same Buddy it sounds as if the person at the other end or you is connected via both Ethernet and WiFi.
This gives a sort of double presence on the 'Net.
Lets say it is your end.
You click to send an Invite and this goes via your Internet connection picking up the IP addresses involved along the way so that the other end knows where to reply to.
As you have two IP address on your LAN there would be two outgoing Invites.
Text chats seem to cope with this and AIM Accounts can be specifically set to allow multiple logins.
Incoming Invites are supposed to follow the text chat route to your computer or more specifically the App on your Mac.
This is done with "hops" through various Internet servers.
The last bit though is the IP of the Router from the ISP you use.
The next bit is the IP given by your router to your Computer - or in the case of your Buddy this could be two IPs if you are connected twice to the router.
7:52 pm Sunday; March 1, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Similar Messages
-
Q: Sending a room invite to N number of users
Question.
Is it possible to send a room invite message to a number of users from a Java backend.
Thanks.Hi,
What do you mean by room invitations? Do you want to send users the room URL by email? We don't have an API for that.
-Jamie -
Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone.
The meeting invite is being sent from a Computer through the Outlook 2010 Email Client. Both Computer and Outlook 2010 are set to Eastern Time. The OWA (Outlook Web Access) for the 2007 account is set to Eastern Time. The Outlook 2010 Email Client is connected to an Exchange 2007 account and the Exchange server for the exchange 2007 account is located in Chicago (Central Time) and is set to Central Time. When the meeting invite is sent from the Outlook 2010 Client the recipient receives the invite on his/her iPhone(set and located in the Eastern Time Zone) and a mime-attachment.ics file is attached to the meeting invite email. There is no info displayed in the subject line or message body. If the iPhone user opens the attachment it displays the meeting date and time and any other info that was sent from Outlook. The Outlook 2010 user sets the meeting for 10:00am to 11:00am. when the meeting invite mime-attachment.ics file is opened on the iPhone the meeting is displayed as 9:00am to 10:00am. if the iPhone user adds the ics file to his/her calendar it adds a meeting event that is scheduled 1 hour earlier than it is supposed to be. I had the iPhone user to set Time Zone support on and off and there is no change.
-
While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.https://support.mozilla.org/en-US/kb/cannot-send-messages
-
Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send>recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be copied to shared account numbers. Please help me figure out how to prevent my children from recieving my text correspondence.
On the devices for the members of your family that you DO NOT want to see your iMessagees, go to
Settings App
Messages
Send and Receive
You should see a list of available contacts which would make messages appear. Make certain that each family member has their own individual contact and NOT the same one that you use. I find it useful to have each family member have their own icloud email and use that for iMessaging my kids. My kids do not have iPhones, but if yours do, their phone number should be listed as well. For iPads and iTouches, use icloud email addresses. If you need to send a message to all 3 kids, say, you can just add all three emails to the To box on your iMessage.
Hope that makes sense. -
My 3GS is responding MESSAGE SEND FAILURE when I attach n send photos. Why? And how do I fix it?
Just started getting a MESSAGE SEND FAILURE response when I attach n send a photo with my texts. Why? How do I fix it?
Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How do I send out an invitation when it won't show up in iCal?
When I create an event, I never thought about invitations. But I can recieve them, but today I wanted to send a party invite, and the invitee on the event would not show up. I don't know why, or how to turn that on, but it's really bothering me because its graduation season and I need my friends to know where to go for my party. So if anyone has any idea hit me up, I would love anyone's help!
There is no way to restore your iPod if it doesn't show in iTunes, although if shows up under "my computer" you could try a reformat there.
I only know the instructions for XP so I'm not sure if it's the same with Vista.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
To exit forced disk mode, reset the iPod. -
Message lost during Message Send in weblogic 9.2 JMS
I am using Weblogic Server 9.2 in a clustered environment (2 nodes in separate machines). The application deployed has ejb timers which picks up data from DB, and sends text messages (very small size as its just an ID) to a Queue (using the JMS APIs - QueueSender.send(message)). There is an MDB (with max-beans-in-free-pool) configured to be 20 listenting to this message. There might be 1-20 records picked up from the DB and the id of those records will be sent to the JMS Queue as separate JMS messages. i.e. QueueSender.send will be called as many times as there are record ids to send. The timer after sending the message to the queue sets the status of all the data it picked up to "Busy" in the same transaction as the message send. We are using XA driver and the JMS Connection factory is also XA enabled. We had problems with this XA transaction as weblogic sometimes sends the messages and before db commit happened to set the status to "Busy". We had a workaround to this problem by setting the JMS Connection factory setting "time to Deliver" to 300 so that the messages are visible to the MDB only after 300 ms thereby giving time for db commit to be over as per the suggestion in the following link. http://jayesh-patel.blogspot.com/. We had done this 2 months back and to date we find no problem.
Now we are facing another strange problem. The JMS sometime misses delivering the messages. This is evident from the logs we had printed from the MDB. The logs indicate some messages has reached the MDB and some did not. This problem occurs occasionally. Also what I see is that this had occured under normal load conditions only though this application operates under high loads (number of messages being processed per day may go up to 5000). In the last one month this had occured 3 times. The JMS messaging is becoming unreliable.
This seems to be a bug in Weblogic 9.2 JMS. Is there any workaround to prevent this problem. ?It is doubtful that JMS is losing messages. Suggestions:
* Try increasing your sheduled message delay. 300 millis is a short delay -- any small network glitch, disk hardware issue, or even a single JVM GC in the JDBC driver can cause the database to take longer than 300 millis to complete its part of the transaction.
* Try "WebLogic JMS Message Lifecycle Logging" if you want to trace message activity.
* Instead of the delay, consider using WebLogic's Datasource "LLR" option, a commonly used solution to your use case. This is an optimization option that yields fully ACID (safe) transactions, and has the very nice side effect of deterministically forcing the TM to always commit the database portion of a transaction before committing any other resources participating in the same transaction.
Links:
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jms_admin/troubleshoot.html
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jta/llr.html#LLRfailover
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/jdbc_admin/jdbc_datasources.html#llr
Tom
Edited by: TomB on May 7, 2010 5:20 PM -
Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more. I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery. I get constant "message send failures and frequently dropped phone calls.
My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!
-
Sending an email invitation doesn't work
Hi there,
I've been trying to send an email invitation to my brother to get himself on skype.
He's not good on computers, so this would be an easier option to get him signed up.
But your email invitation link doesn't work for days!
Can technical support fix that please?
Thank you.
Kristinayesterday
When adding a new contact I click on 'contacts' then 'add contact' then 'search skype directory'. I fill in new contact email and if no results skype gives me he option to send an email invitation. However when I click on this link it opens Internet Explorer browser to page http://www.skype.com/en/?SkypeName=&FriendEmailAddr_1=&FriendEmailAddr_2=&FriendEmailAddr_3=&FriendE...
This is seems the same as the home page http://www.skype.com/en/
I can not see any link whereby one can send an email invitation.
I read somewhere that this was a bug in the new version of skype. -
Javax.xml.soap.SOAPException: Message send failed: Connection timed out
Hi,
where can i adjust the timeout for:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect
The webservice needs 5min to return a message....
I found a duplicate of this on thread:
error initiating a test instance
But no answer
Message was edited by:
HEWizardI found http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
Setting Timeouts for Synchronous Processes
For synchronous processes that connect to a remote database, you must increase the syncMaxWaitTime timeout property in the SOA_Oracle_Home\bpel\domains\default\config\domain.xml file:
<property id="syncMaxWaitTime">
<name>Delivery result receiver maximum wait time</name>
<value>60000000</value>
<comment>
<![CDATA[The maximum time the process result receiver will wait for a
result before returning. Results from asynchronous BPEL processes are
retrieved synchronously via a receiver that will wait for a result from the
container.
<p/>
The default value is 60 seconds.]]>
</comment>
</property>
But this changes nothing...
Is this value ignored? -
i am using iphone5 and when sending sms within 160 characters i am getting 2 sms counts deduction & i hear the message send sound twice. what is wrong here. can some one please help me here???
APPLE need to do something here!!!!!!1Hi...
Thanks for your repaly .
and i am not bale to post a question in developer forum i tried hard but i didnt get .Can you plz explain me how to post a question in developer forum this is very helpfull for me.Because i never did this thing. -
Message Send from ABAP Proxy implemented in XI Server ABAP Stack
Hello everyone,
I have a question and I'm not sure of this is an ABAP question but I'll try here and try to find some information on ABAP forums and weblogs, I need to send a XML message to the XI pipeline from an ABAP Server Proxy implemented in the same XI ABAP Stack Server, why I need this? well actually I can't find a way to do it in a BPM so I'm going to try to set the logic for this message send in the ABAP Stack, so do you know like a Function Module so I can send a message to the pipeline but I need the message to be set as Scheduled, I'll try ABAP Forums and Weblogs too, thanks in advance.
regards,
julioHi
You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
Thanks
Gaurav -
I am not receiving all my txt messages, I think it is because in Setting -> messages -> send and receive, my cell phone number doesnt have a check next to hit. Im not able to check it. any ideas?
Old phone is off and number is fully ported? SIM card new and installed/seated properly? All Apple credentials disabled if coming from iPhone?
-
All -
I'm new to consuming web services in JDeveloper. I'm using Oracle JDEV 10.1.3.3/OC4J. I'm using this version since it is compatible with Oracle EBS 12.1.3. My intent is to pull data from our third party recruitment app (Success Factors) and load that data into Oracle HRIS. I'm already doing this through a .NET application. I'm converting it to be a Java Concurrent Program in EBS. The code listed below is a stub call to verify I'm on the right track. I created a JDeveloper Web Services proxy project. I'm testing it locally on my windows desktop. When I'm able to consume the service successfully, then I'll think about moving it to the EBS server.
I'm getting the following error when I invoke the following service:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
End point is: https://api4.successfactors.com/sfapi/v1/soap?wsdl
Any help/assistance would be much appreciated.
Below is my code and output of my test:
package emsc.oracle.apps.emscper.sfapi.proxy;
import HTTPClient.HTTPConnection;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSession;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.IsValidSessionResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Login;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LoginResult;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Logout;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.LogoutResponse;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFCredential;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.SFParameter;
import emsc.oracle.apps.emscper.sfapi.proxy.types.sfobject_sfapi_successfactors_com.Error;
import java.io.File;
import javax.xml.rpc.ServiceFactory;
import java.util.ArrayList;
import java.util.List;
import java.util.Date;
import javax.xml.ws.BindingProvider;
import javax.xml.soap.SOAPException;
import java.util.Map;
import oracle.security.ssl.OracleSSLCredential;
public class SFAPITest {
// Declare members:
private String companyId;
private String userName;
private String password;
private String developerKey;
private Date effDt;
private String greaterThanEffDt;
private String lessThanEffDt;
// Declare constants:
final static private String breakLine = "+---------------------------------------------------------------------------+";
final static private String format = "yyyy-mm-dd";
private enum ReqId {
PrimaryReq(25),
PrimaryReqCEO(26),
EmCarePrimary(27),
RTI(28),
EmCareClinical(29);
private int reqId;
private ReqId() {
private ReqId(int value) {
reqId = value;
public int getReqId() {
return reqId;
// Getters and Setters:
protected String getCompanyId() {
return this.companyId;
protected void setCompanyId(String value) {
this.companyId = value;
protected String getUserName() {
return this.userName;
protected void setUserName(String value) {
this.userName = value;
protected String getPassword() {
return this.password;
protected void setPassword(String value) {
this.password = value;
protected String getDeveloperKey() {
return this.developerKey;
protected void setDeveloperKey(String value) {
this.developerKey = value;
protected Date getEffDt() {
return this.effDt;
protected void setEffDt(Date value) {
this.effDt = value;
protected String getGreaterThanEffDt() {
return this.greaterThanEffDt;
protected void setGreaterThanEffDt(String value) {
this.greaterThanEffDt = value;
protected String getLessThanEffDt() {
return this.lessThanEffDt;
protected void setLessThanEffDt(String value) {
this.lessThanEffDt = value;
public void runProgram()
SFAPIService mySFAPIService;
String CompletionText = "";
String effDtStr2 = null;
/* Code your program logic here.
* Use getJDBCConnection method to get the connection object for any
* JDBC operations.
* Use CpContext provided commit,rollback methods to commit/rollback
* data base transactions.
* Don't forget to release the connection before returning from this
* method.
/* Call setCompletion method to set the request completion status and
* completion text.
* Status values are ReqCompletion.NORMAL,ReqCompletion.WARNING,
* ReqCompletion.ERROR.
* Use Completion text message of length 240 characters. If it is more
* than 240 then full string will appear in log file and truncated 240
* characters will be used as request completion text.
try
ServiceFactory factory = ServiceFactory.newInstance();
mySFAPIService = (emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService)factory.loadService(emsc.oracle.apps.emscper.sfapi.proxy.SFAPIService.class);
SFAPI api = mySFAPIService.getSFAPI();
/// SFAPI api = new SFAPI();
//Map<String, Object> requestContext = ((BindingProvider) api).getRequestContext();
//requestContext.put(BindingProvider.SESSION_MAINTAIN_PROPERTY, true);
System.out.println("ServiceName => " + mySFAPIService.getServiceName().toString());
System.out.println("End Point => " + mySFAPIService.getServiceName().toString());
System.out.println(breakLine);
// Authentication: Login to SFAPI:
SFCredential credential = new SFCredential();
// Fake credentials being passed in for this post:
credential.setCompanyId("XXX");
credential.setUsername("XXX");
credential.setPassword("XXX");
credential.setDeveloperKey("XXX");
HTTPConnection httpsConnection = null;
OracleSSLCredential _credential = new OracleSSLCredential();
_credential.setWallet("\\\\\\C:\\Program Files\\Java\\jdk1.6.0_33\\jre\\lib\\security", "ParkEstes3");
/*System.setProperty("javax.net.ssl.trustStore","C:\\\\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\keystore");
System.setProperty("javax.net.ssl.trustStorePassword","changeit");
System.out.println(System.getProperty("javax.net.ssl.trustStore"));*/
// SFParameter: Define a generic SFParameter List. This is a necessary parameter
// to invoking calls in SFAPI:
/*System.setProperty("javax.net.ssl.keyStore",
"file:\\\C:\\jdk1.4.1\\jre\\lib\\security\\client.keystore");
System.setProperty("javax.net.ssl.keyStorePassword","welcome"); */
/* System.setProperty("oracle.net.wallet_location",
"(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=\\\C:\Users\dparrish\Oracle\WALLETS)))"); // (2) */
File kstore = new File("C:\\OraHome_1\\jdev\\jdevbin\\jdk\\jre\\lib\\security\\jssecacerts");
boolean exists = kstore.exists();
if (!exists) {
System.out.println("Keystore does not exist");
else {
System.out.println("Keystore does exist");
System.setProperty("javax.net.ssl.trustStore", kstore.getAbsolutePath());
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
//System.setProperty("proxySet", "false");
//System.setProperty("http.proxyHost", "127.0.0.1");
//System.setProperty("http.proxyPort", "8080");
System.out.println(kstore.getAbsolutePath());
List<SFParameter> lst = new ArrayList<SFParameter>();
SFParameter param = new SFParameter();
param.setName("");
param.setValue("");
lst.add(param);
SFParameter[] sfParam = lst.toArray(new SFParameter[lst.size()]);
Login login = new Login();
try {
login.setCredential(credential);
System.out.println("1");
login.setParam(sfParam);
System.out.println("2");
LoginResponse loginResponse = new LoginResponse();
LoginResult loginResult = new LoginResult();
try {
loginResponse = api.login(login);
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("3");
try {
loginResult = loginResponse.getResult();
catch (Exception e ) {
System.out.println(e.getMessage());
System.out.println("4");
IsValidSession vs = new IsValidSession();
IsValidSessionResponse isValidSessionResponse = api.isValidSession(vs);
System.out.println("5");
if (isValidSessionResponse.isResult()) {
System.out.println("Session is valid");
System.out.println("Result => " + loginResult.getSessionId());
System.out.println(breakLine);
Logout logout = new Logout();
LogoutResponse logoutResponse = api.logout(logout);
if (logoutResponse.isResult()) {
System.out.println("Logout of SFAPI Successful");
else {
System.out.println("Logout of SFAPI Unsuccessful");
else {
System.out.println("Session is invalid");
List<Error> errors = new ArrayList<Error>();
for (int i = 0; i < loginResult.getError().length; i++) {
errors.add(loginResult.getError()[i]);
for (int i = 0; i < errors.size(); i++) {
System.out.println("Error Indice => " + i);
System.out.println("Error Code: => " + errors.get(i).getErrorCode());
System.out.println("Error Message: => " + errors.get(i).getErrorMessage());
System.out.println(breakLine);
} // end for loop of SFObject errors
} // end InvalidSession
catch (Exception e)
System.out.println("Session Credential Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
catch (Exception e)
System.out.println("Parameter List Exception");
System.out.println("Exception => " + e.getMessage());
System.out.println(breakLine);
} // end runProgram
// Constructor:
public SFAPITest() {
} // end constructor
public static void main (String args[]) {
try
SFAPITest test = new SFAPITest();
test.runProgram();
catch (Exception e) {
System.out.println("main exception => " + e.getMessage());
} // SFAPITest
Here is the output with trace:
WARNING: Unable to connect to URL: https://api4.successfactors.com:443/sfapi/v1/soap due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
Session Credential Exception
Exception => ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: String index out of range: -7
+---------------------------------------------------------------------------+
Process exited with exit code 0.The other end is throwing back a programming error.
That might be because you are sending incorrect data and the other end fails to validate it.
You might be able to guess based on your C# code. But, since you are using soap one generic solution is available to you.
- Get an http proxy interceptor like wireshark.
- Run it while your C# app runs, collect the http requests from that.
- Run it while running your java code, collect the http requests from that.
Compare the two.
Maybe you are looking for
-
I just added a 2nd and 3rd ata drive to my 450 MHZ tower. The motherboard had an open plug that said ata. I plugged in the cord (strip) that came with the drive into the board and into the additional hard drives. (fyi) I took both hard drives and str
-
Using Windows Network Policy Server to authenticate Prime Infrastructure 1.2 admin access
Dear all, How can I authenticate admin access to the Prime infrastructure 1.2 using AAA mode RADIUS with Windows Network Policy Server as RADIUS server? I find some information using ACS as RADIUS server but cannot find how to for Windows NPS. I try
-
TimesTen database in Sun Cluster environment
Hi, Currently we have our application together with the TimesTen database installed at the customer on two different nodes (running on Sun Solaris 10). The second node acts as a backup to provide failover functionality, although right now only manual
-
I was experiencing safari and other applications shutting unexpectidely continously. And my mac is really slow. So opened clamxav for a virus detector and I found that the computer was infected with a Win.Trojan.Swrort-88. How would I remove this sho
-
Sql connection can not open why?
I use the following source code to connect sql database, but the connection can not open, can somebody help me? thanks. SqlCeConnection con = new SqlCeConnection("Data Source=" + System.IO.Path.Combine(System.IO.Path.GetDirectoryName(