Messages stuck in Holding status in Runtimeworkbench

Hi,
Some Messages are stuck in Runtime workbench of PI in Holding status,When I resend the messages they return to same status again.
The messages are sent on 15-5-2014.I could not find those messages either in SXMB_MONI or SMQ2.
Now how to resend the messages successfully.Appreciate your help in this.

Hi Gurudatta,
If it is EOIO then you can go the Messaging System and there you can find the message which is blocking the other queues. Check the first message and delete it
And go to runtime work bech ---Message Monitoring --Adapter Engine and filter Holding message and Resend/cancel the first holding message
If it is not successfull stop and start the recevier communication channel. This will work
Regards,
SK

Similar Messages

PI RWB-Messages stuck in Delivering Status

Hi Experts,
PI 7.1
Scenario: Proxy to Mail (Outbound)
QOs: Exactly Once in Order
We are facing problem while sending messages to receiver.
Messages are stuck in Delivering status and the messages followed by them are going into holding status.
Messages in Delivering status has no audit logs.
Issue has started couple of months back. We took restart initially to rectify the barrier but it is happening again. This is repetitive issue and we are looking for permanent fix. Restart is not preferred resolution as it is a production system. Please suggest how can we overcome it? It would be a great help.

Hi Hardik
I've blogged about this issue recently. Please check out the blog:-
http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/03/27/handling-and-preventing-messages-stuck-in-to-be-delivered-status
Rgds
Eng Swee

How to STOP messages going into HOLD status very frequently

I'm facing a problem in our Testing Environment where many messages are going to HOLD Status and also there are no messages in the System Error state.
We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
But this is a very very time consuming process.
So can you please let me know if there is any solution to fix this prolem.
Thanks,
Pruthvi

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
Go the the above
Sign in. Go to the left side where it says phone numbers. Delete your number. Then save.
Your iPhone friends will now get the red exclamation point that the message didn't deliver instead of it sending. Then your iPhone friend will force the message to go through as a text by long pressing the message and choosing send as text. Once tthey do that once you're set and all other messages will automatically send as texts for them to you. You just have to hope your iPhone friends realize to force the messages through as texts the first time around but even if they don't at least they know they aren't reaching you and you aren't ignoring them.
Does that help?

Alert for XI messages in a Holding status

Is there a way to trigger an alert in XI 3.0 sp20 for messages that are in a holding status. Right now I am manually checking using the RWB but I would like to trigger an alert if messages are holding for an extended period of time. I have setup Email alerts for messages that have an error status but I can't seem to find out how to setup for messages that are holding.

You can either configure CCMS alerts or using ALRTCATDEF. YOu can refer to the below links.
CCMS:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Michal's blog-ALRTCATDEF:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Other help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8fe69590-0201-0010-8097-c8a2ca60d5df
Venkat.

Messages stuck in delivering status

Hi all,
I have an idoc-xi-ftp scenario with EO quality of service. For the very first tests we set up a file CC using nfs and everything worked fine.
Today I received the info to connect to the FTP server and introduce it on the file CC. The issue comes because some kind of problem writing on the ftp server leaves the messages in status "delivering" (DLNG). While FTP guys try to fix the issue (they don't know where he tissue is right now) I have switch again to NFS with the old configuration in order to allow the users to keep testing.
But the issue comes because now the messages being sent to NFS scenario are marked as to be delivered and they are not processed.
I'm suspicious about the delivering ones and I'd like to cancel, but the cancel button doesn't allow me to do it so I'm hanged in a circle.
Any ideas?
Thanks in advance,
David R.

Hi,
Yes, ABAP +Java implies a complete restart of the PI server, which is not recommended in the production environment.
Generally, this case is like a deadlock situation. We will not be able to either resend/cancel the messages in delivering.
So , best option would be to identify which server node these messages are stuck and then restart that server node.
With the server node restart these messages in Delivering are again reprocessed by the server.
Regards,
Younus

Message stuck in SXMB_MONI status " Sceduled for Outbound Process." Urgent

Hello All,
All messages in our XI environment are getting stuck with status Scheduled for Outbound Processing ...I have already done the following..
1) Registered the Queues
2) Deleted entries in SMQ1 and SMQ2 and restarted messages
Last time we had this issue, we were finally able to reslove it by doing a J2EE restart. But this has resurfaced again within a week, and this time even the restart is not working.
Do you think some parameter has been set incorrectly during the install ..
Any help would be appreciated ..
thanks
Mayank

Hey Mayank,
Did you got JCO failure error for any of XI message before start of getting this error message?
If so it's failing because of RFC connection problem...
You need to go to Tcode : SM59 in your xi server
check the TCP/IP Connections which is created while post-installation phase..
1. AI_RUNTIME_JCOSERVER.
2. AI_DIRECTORY_JCOSERVER
Solution : Increase the default value for CPIC_MAX_CONV (se note 314530).
Hope this wull solve your problem.
Nilesh

Holding status in Adapter Framework

I have messages stuck in "holding" status in AF, but no prior messages in an errored status. Anyone ever see this before?

We're on SP10, moving up to 11 as I type this. Yes, this is EOIO. They will not restart.
We THINK that the archive/purge jobs removed an event in "failed" status from the same EOIO Q (note 813993 indicates this is a bug fixed in SP11) and now our messages are stuck.
I looked into 811864 - our messages are not in "terminated incorrectly" status. However, we are looking thru that note & some related ones to figure out how to get rid of those messages, because the purge jobs aren't picking them up. (Perhaps because we are on our way up to SP11...) Timing!!! Any more advice on how to clear any & all messages for XI in the IE or AF is appreciated. We are just on a sandbox, and this seems to be something we wish we had about twice a week.

Messages in "holding "status in Adapter engine

Hi All
We have a problem with the messages being stuck in " Holding " status
We have resent the payloads for these messages,
Although these messages have been manually processed,
1) Messages went into holding status and are still remaining with the same status
2) What we need to do to get rid of message ie. cancel, delete etc.
Please dont send links, A solution will be appreciated
Kindly help

Rajeev
I followed this
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
and the messages did get cleared
However on the date it got stuck to the Holding state
it is still showing so .
and am unable to get rid of the same status for these messages for that date .. even tried a cache refresh but doesnt help
kindly suggest
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

Urgent - Messages in "HOLD" status - Alerting

Is there any way that one can get alerted for messages being in HOLD status.
say, for 2 hours.
reg,

Ahmad,
If there is a message in HOLD status due to some reason, I want to get alerted and receive a message in the Alert Inbox.
Please have a look at the note: 813993.
PS: IF a EOIO message fails then the next one will be in HOLD state.

Messages in HOLDING status in AE

Hi All,
We have an issue with JDBC receiver EOIO messages, with messages going into HOLD status in AE , its a DEV environment :
1) We have tried checking for failed messages before these messages we donot have any failed messages before these messages just messages in HOLD..
2) we are not able to delete or cancel these messages , we get a message cannot delete the message ,
3) The message is doing a INSERT update to JDBC , JDBC connection is fine.

Hi Kiran,
Please let me know if your problem is fixed.
I'm also facing the same problem in our Testing system where many messages are going to HOLD Status and also there are no messages in the System Error state.
We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
But this is a very very time consuming process.
So can you please let me know if there is any solution for this prolem.
Thanks,
Pruthvi

Message stuck in adapter engine with status Hold, how to delete those

Hi,
In Dev system around 6 lac messages are stuck in ;holding' state. How can I delete them. Is there is any standard proge which can delete all these messages.
Can I delete messages of IE with status 'recorded'?
Regards,
Krishna

Hi,
see this wiki
RSXMB_ARCHIVE_MESSAGES Archive XML Messages
RSXMB_CANCEL_NOT_REST_MESSAGES Cancel XI Messages With Errors That Cannot Be Restarted
RSXMB_DELETE_ARCHIVED_MESSAGES Delete Archived XML Messages
RSXMB_DELETE_MESSAGES Delete XML Messages from the Persistency Layer marked for DEL
RSXMB_CANCEL_MESSAGES Mass cancellation of error messages - XI
RSXMB_SHOW_REORG_STATUS & RSXMB_SHOW_STATUS provide an overview for all XML messages in XI persistency layer.
RSXMB_MESSAGE_STATISTICS2 which provides the processing statistics. This report basically analyzed the history table.
RXWF_XI_UNSED_MSGS report helps in converting messages states other than 003 to final state i.e. 003.
SXMS_REFRESH_ADAPTER_STATUS report helps in converting message sates like 001/008 into final state.
http://wiki.sdn.sap.com/wiki/display/XI/PIArchivingConceptual+Overview

Monitoring EOIO Messages stuck in AE with HOLD status?

Hi Gurus,
Scenario: IDOC -- > XI (Message split) - - > (HTTP/File)
Some times messages to File adapter are stuck in Adapter Engine with status "HOLD". Found the root cause and un-checked "Maintain order at runtime" in interface determination.
How to get alert if the EOIO messages are stuck in AE with status "HOLD"?
Please help.

Hi,
HOLD status
This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
Regards,
Sreenivas

File adapter problem - message in RWB HOLDING msg status

Problem in XI File adapter recver comm channel.Getting msg in RWB Adapter Engine HOLDING status.
1. No explaination in RWB Details tab, of why status Holding.
2. File does not get created, because of Holding status.
3. Cannot Resend or Cancel in RWB the message.
<b>Sometimes the msg goes through and other times does not and is stuck.</b>
File Adapter Parms set as:
Connection Mode: Per File Transfer
Transfer Mode: Text
File Adapter setting Max concurrency = 1 would that have anything to do with it?
File Construction Mode:Create
Put Name: Direct
Empty msg-handling: Write Empty File
Type: Text
<b>Any ideas Why holding? and Where to see more details. </b>

Hey
exact same issue has been discussed today on SDN.anyways have a look at the following blog
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Thanx
Aamir

Messages stuck in TO BE DELIVERED status

Hi !
Suddenly, whenever a message has to use the File Adapter, no mather which communication channel is to be used, the message is stuck with the "TO BE DELIVERED" status.
These messages, all have SUCCESSFUL status in the SXMB_MONI. The problem is in adapter engine. ALL have NO errors in their Audit Log. Because the problem is in adapter engine/framework, obviously queues at SMQR/SMQ1/SMQ2 are emtpy. ALL have QoS = EO (no eoio queue is used, NO predecessor messages are stuck with system error).
This occurs no mather which adapter is the sender (RFC, File, etc.)
The audit log is:
2008-04-10 16:59:34
Success
Message successfully received by messaging system. Profile: XI URL: http://xxxxxxx:yyyyy/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-04-10 16:59:34
Success
Using connection File_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-04-10 16:59:34
Success
Message successfully put into the queue.
If we try to resend the message using the "resend" button in RWB, the message keeps in the TBDL state and the only difference is a new "success" entry in the audit log saying that:}
"Success | Admin action: Trying to redeliver message".
We already refreshed the cache and restarted the Java stack.
Any clues?
Thanks !
Regards,
Matias.

Hi,
Statuses such as HOLDING or FAILED usually happen only for delivery semantics EOIO (exactly once in order) or BE (best effort means Asynchronous). TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue. This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
The MS returns HTTP 200 to the Integration Server only if this was executed successfully. In this example scenario, status TO_BE_DELIVERED should not appear since we assume that the IS has called the servlet successfully.
The status is updated from TO_BE_DELIVERED to DELIVERING when the message has popped out of the receive queue and the event handler lookup was successful, so there is a small gap where TO_BE_DELIVERED could remain in the message monitor, although it was delivered from IS successfully.
Regards,
Srini

Messages stuck in Holding status in Runtimeworkbench

Similar Messages

Maybe you are looking for