Messages transfer failure

Hi,
I have the latest PCSuite software version (6.82.22.0) installed on a PC with windows XP OS. It is not possible to transfer the messages (long messages, more than 160 characters) from my nokia 6021 (but the problem occurred even with a nokia 6070) and the PC (I'm using the IR port, but I don't think is an hardware problem). By using the File Manager icon, the long messages are displayed on the PC with a blank fields (no information is displayed). Is it a software problem? Any suggestions? Thanks in advance...

Hi,
see this:
/discussions/board/message?board.id=pcsuite&messag​e.id=11517

Similar Messages

  • UCCX 9 - Too many transfer failures

    Hello guys,
    Need some help here as I get "Too many transfer failures" message when Im running the select resource step in my script. I am sure that it's not the problem with the script as it works previously. Attach also the MIVR logs and I'm highlighting the part where I think it's the cause of the issue.
    6451: Feb 23 10:03:38.447 SGT %MIVR-SS_TEL-7-UNK:CallID:0 MediaId:4068/1 Task:27000000001, TerminalConnection to Terminal: CTIP_9009 is HELD
    6452: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= ConsultCallActive
    6453: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= ConnCreatedEv 9009::1
    6454: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= ConnConnectedEv 9009::1
    6455: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallCtlConnInitiatedEv 9009::1
    6456: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= TermConnCreatedEv CTIP_9009
    6457: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= TermConnActiveEv CTIP_9009
    6458: Feb 23 10:03:38.449 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallCtlTermConnTalkingEv CTIP_9009
    6459: Feb 23 10:03:38.450 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallCtlConnDialingEv 9009::1
    6460: Feb 23 10:03:38.450 SGT %MIVR-SS_TEL-7-UNK:CallID:0 MediaId:4068/1 Task:27000000001 Got CallCtlConnDialingEv 9009::1, events on the AddressCallObserver.
    6461: Feb 23 10:03:38.453 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallCtlConnEstablishedEv 9009::1
    6462: Feb 23 10:03:38.453 SGT %MIVR-SS_TEL-7-UNK:CallID:0 MediaId:4068/1 Task:27000000001 consultWithoutMedia gets CiscoJtapiException: 0x0(CTIERR_UNSPECIFIED)::Unspecified error
    6463: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= ConnFailedEv 9009::1
    6464: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallCtlConnFailedEv 9009::1
    6465: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:CallID:0 MediaId:4068/1 Task:27000000001, ConsultCallObserver FAILED, cause: 109, callctl cause: 109
    6466: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:CallID:0 MediaId:4068/1 Task:27000000001, ConsultCallObserver():Received msg from original call Interrupted
    6467: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:OrigCall=CallID:0 MediaId:4068/1 Task:27000000001, ConsultEvent= CallObservationEndedEv
    6468: Feb 23 10:03:38.454 SGT %MIVR-SS_TEL-7-UNK:Call.transferFailed(6013, UNKNOWN) JTAPICallContact[id=0,implId=4068/1,state=STATE_ANSWERED_IDX,inbound=true,App name=HelpDesk,task=27000000001,session=5000000001,seq num=0,cn=4000,dn=4000,cgn=5010,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=4000,route=RP[num=4000],OrigProtocolCallRef=0000000000000FE40121D1EF00000000,DestProtocolCallRef=null,TP=9009]
    Appreciate your help.

    I can make a pretty good guess on this one having seen the situation occur many times before. 
    UCCX is not aware of, and doesn't really understand, the partitions and call search spaces on CUCM.  When you do a select resource step, and attempt to send the call to the agent, the UCCX server will basically do a switch hook flash type supervised transfer to transfer the call to the agent.
    When the transfer attempt is made, the CTI port that the caller is queued on will attempt to outdial to the agent's extension.  It assumes that the agent phone is reachable, but has no way to verify this. 
    If the agent extension cannot be reached as a destination using the calling search space assigned to the CTI port, the transfer will fail.  The agent will likely get stuck in a reserved state, or maybe even made not ready by the system.  You can validate this by opening the dialed number analyzer in CUCM, and use the analyze function to dial the agent extension using the CSS assigned to your CTI ports. 
    Every time I've seen this problem over the years, the above issue was the problem.  Check it out and see if it doesn't solve your issue.
    Good luck!
    -Cliff

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • My 3GS is responding MESSAGE SEND FAILURE when I attach n send photos. Why? And how do I fix it?

    Just started getting a MESSAGE SEND FAILURE response when I attach n send a photo with my texts. Why? How do I fix it?

    Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
    And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

    Hi,
    Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
    I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'. 
    Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
    Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
    is not a possible owner of the resource.
    For help, click:
    http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
    BUTTONS:
    OK
    I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
    Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
    application SQL Server SG1DB. Could not move the resource to available storage. An error occured
    while moving the resource BCK_SG1DB to the clustered service or application Available Storage
    Any ideas why it failed or how could I delete the SQL server instance from Clauster?
    Thx

    Hello,
    Please read the following resource.
    https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • In the past month or so my iPhone 5 battery is dying in hours, whereas it used to last all day at least.  Also, I am getting constant "message send failures" when texting and frequent dropped phone calls.

    Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more.  I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery.  I get constant "message send failures and frequently dropped phone calls. 

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • Message Send Failure - Only in one location

    When sending MMS to ANYONE in my home town, It never goes through and results in a "Message Send Failure". Every once in a while it MIGHT work. I have full bars.. in fact, I can see the tower from my back yard with a clear line of sight. it's right next to my house. But it's only in this location. If i drive 10 mins down the road into the next town, where they have 3G... the picture goes through no problem. I can be in that other town, turn off 3G and just be on Edge.. and still.. the message and picture go right through.
    Is this possibly a problem with the tower in my back yard? All my calls are crystal clear... just data seems to stink. I can surf the web rather slowly.. but all my text messages that have Multimedia attached never work. And this is with every OS version since the 3gs was released.

    any help here, friends?

  • RE: SMTP message transfer with Forte'

    Hey,
    You would have to use POP or POP3 client (not a lot of work) to retrieve
    messages from mail server or write you own mail server (much, much more
    work).
    See SMTP/POP3 documentation on requirements - implementation, there is
    plenty of information on the internet.
    Hope this helps.
    Dariusz Rakowicz
    Consultant
    BORN Information Services (http://www.born.com)
    8101 E. Prentice Ave, Suite 310
    Englewood, CO 80111
    303-846-8273
    [email protected]
    -----Original Message-----
    From: Paul Salmon [SMTP:[email protected]]
    Sent: Tuesday, September 08, 1998 4:12 PM
    To: '[email protected]'
    Subject: SMTP message transfer with Forte'
    Hi,
    We are exploring a number of ways to transfer data from a business partner
    through a secure extent circuit. Since I have been reading a few messages
    regarding SMTP file transfer (send), I was wondering if anyone has any
    experience in writing a Forte' service object to receive an SMTP message
    and then parse it and insert the data into a database.
    Paul Salmon
    [email protected]
    (714) 536-9778 voice
    (714) 536-9778 fax
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hello Sergiy,
    Many thanks. I am in touch with our technical colleagues for the same and will revert back with results.
    Thanks
    Srinivas

  • "Network out of order" and "Short message transfer rejected"

    Guys,
    I have a BB 9300 3G Curve and I have trouble sending SMS. This is a peculiar problem since I
    #1 am able to send an SMS problem free sometime
    #2 get an error message saying "Network out of order"
    #3 get an error message saying "Short message transfer rejected"
    Plus, this problem is not specific to a particular contact number. I get different messages (1,2,3 above) for the same number at different times. I have tried putting my SIM in a different handset and it works perfectly fine.
    Someone please HELP!

    Simply try pulling out the battery and leaving it out for a couple minutes. Usually, that is the fix-all to glitches. If not, you should contact your wireless mobile provider and see if they can help you. Usually, they are very easy to get along with and want to help you. But I think the battery pulling out will help you. It's happened to me before and I had to do that.

  • IMessage message send failure

    Whenever I try to send a message on Imessege the blue bar stops at about 90% and then says message send failure. I have an iPod touch 3rd gen iOS 5 so I don't use 3G. HELP ME!!!!!!!!  Any ideas!!!!!!!!??

    Btw it's the built in iMessege app you get when you update to ios 5 not the other one where you have to download from the app store

  • Exclamation point and short message transfer rejected

    I recieved a short message with an exclamation point, which I googled to be "urgent message", when I tried to reply I got "short message transfer rejected".
    I know that the person messaging me is trying to keep his number secret, which is why I was surprised that he even texted me, could it be because of any of his settings?

    Simply try pulling out the battery and leaving it out for a couple minutes. Usually, that is the fix-all to glitches. If not, you should contact your wireless mobile provider and see if they can help you. Usually, they are very easy to get along with and want to help you. But I think the battery pulling out will help you. It's happened to me before and I had to do that.

  • Everytime i try and send a message to my boyfriend through imessage on my ipad, it says "Message send failure" but all of the messages are coming in through my email, i hate texting my boyfriend through my email. So can someone help me, please.

    Everytime i try and send a message to my boyfriend through imessage on my ipad, it says "Message send failure" but all of the messages are coming in through my email, i hate texting my boyfriend through my email. So can someone help me, please.

    "iMessage allows users to send texts, photos, videos, contact information, and group messages over Wi-Fi or 3G to other iOS 5 users, thus providing an alternative to standard SMS messaging for all users with devices running iOS 5."
    This is what it is and what it does. You both have to have iOS 5 installed on your supported device. If that's not what your setup is, then that's your answer.

  • Get amount of megabytes for the message transfer per day, month, year

    Dear experts,
    can you please tell me the name of the report which can be used to get the amount of megabytes for the message transfer per day, month, year etc.? I can't find it in our system.
    Best regards,
    David

    Hi,
    Check this blog: /people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
    SXMSPFRAWH: this table contains runtime performance data for successful message and sender and receiver information is stored as address id that derive information from SXMSPFADDRESS, from this table you can find out volume and latency also.
    Regards,
    Gourav

Maybe you are looking for

  • Issue on display

    Hi guys, I'd like to ask you if it's normal this issue along the bottom of my MacBook's Pro high resolution Led display. The official Apple service provider told me that there isn't any problem at all but I'd like to know what you think about. MacBoo

  • Error: No valid XML document received*_

    Hi All, We are connecting our CCMS system to NetWeaver J2EE engine on which E-Sourcing is running. For this we registered java component and hosts in cen. But we are getting error as : No valid XML document received Please can anyone tell me how to o

  • I set up my mac mail account on the computer using all the same info as the phone but I still can't get mac mail on the computer.

    Ever since icloud came out my desktop has been a traffic jam of pop ups. Apple Passwords are recognized in one app but rejected in another. I'm never able to set up my .mac mail it just won't receive. The new iphoto is a complicated mess. Once you em

  • Memory Leak in WebBrowser Control

    I am building a Windows Phone 8 app with a WebBrowser Control in it. I have a list of URLs, whenever I navigate through this list of URLs in WebBrowser control, large amount of memory is being used and not released. After some point my app is crashin

  • What are the chances of a N95 Black Edition?

    Hi guys ive been really tempted to get a N95 but im wondering if it would be worth waiting a few more months to see if there is any news of a black version. What do you guys think?