Messages typed not appearing on the QWERTY display...

Hi..
Im having this prob which is when i type a message its not appearing on the small white screen. This happens to both mode for mini QWERTY and also Full Screen QWERTY. So when i use the Full screen mode i cant see the words that i typed untill i click the green colour tick mark.
Pls help me if you guys know whats the prob...
Thanks

Hi Venkat,
Yes thier is a problem in your config.
Go to SPRO -> MM ->Purchasing>Confirmation->Setup confirmation control.
Check your setting for the the Inbound Delivery Make it Not Relevant for POD
and further select it and go to Confirmation Sequence and select AB -Order Acknowledgment and check box MRP-RElevant and then select LA-Inbound Delivery and Check all three boxes save it and then check in Me21n i think it should work
Lekhram

Similar Messages

Sent e-mail messages do not appear in the sent box

sent e-mail messages do not appear in the sent box

Glad it's working for you but it's still not for me. I was sending emails fine today and they went to sent box then all of a sudden they aren't there. Does anyone know what is the problem and a simple solution?

SMS messages do not appear in the Messages list, although the BlackBerry smartphone indicates that SMS messages have been received

The BlackBerry smartphone shows notification that a SMS message has been received, but the SMS message does not appear in the Messages list or the SMS and MMS list

Hi!
Do you have an icon for SMS and MMS messages?
To find the messages in the mean time from the main message queue do a search:
Options>search setup up the options as follows it will show all unopened messages.
Service=ALL SERVICES
folder: ALL FOLDERS
show: ONLY UNREAD
type=ALL
Thanks,
Bifocals
Here is the icon I'm referring to:
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

Every time I would download games for free, always appear message "Verification Required". How that message does not appear and the free download smoothly.

Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Minimized messages do not appear under the Window menu

If I minimize a few messages (yellow button) in Mail, then quit Mail and reopen Mail, the minimized messages don't appear under the Window menu. The only way to retrieve them is to go into Expose one at a time and click on them.
This seems like a bug or design flaw.
Any ideas?
Message was edited by: haroldo1

Apparently fixed with 10.6.2

UTL_MAIL sent messages do not appear in the outbox OUTLOOK

Dear Forrum
Sorry for me bad english, I am not speak very well the english. I am from Ecuador.
I configured UTL_Mail because i need to send email and everything works good. But when I send an email with an email account associated with the domain that I configured. The outlook does not appear anything in the outbox.
Example
I sent a message [email protected] account, the message is sent and reaches all recipients. In the inbox of the recipients [email protected] appears as the sender, but when I enter my account Outllok in the outbox nothing appears. My account is [email protected]
What happens?
I am working with apex 11g.
Danny Lima Ecuador

897381 wrote:
So, Where sent messages are stored?
Because if I go into my email account nothing appears in the outbox?Of course not. Why would it appear in your e-mail reader's outbox when your e-mail reader did not send the e-mail ?
my Pl/sql looks like:
BEGIN
utl_mail.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'Test',
message => 'HOlix');
END;And this results in the Oracle database server to contact the mail server and send the mail. Your e-mail client is not part of this process. Your e-mail reader does not know about that e-mail. Your e-mail reader is a client- not a server. It has no reason to know what another e-mail client (your PL/SQL code) send or did not send.
You want an outbox? You need then to design and code one for your PL/SQL mail client.
I dont understand what happen?Perhaps you should read up on WHAT a mail (SMTP) server is, HOW it works, and WHAT a PPOP3/IMAP mailbox is, and HOW that works?

Cost Centers not appearing in the GL Display FAGLL03

Dear Friends,
In case of a particular GL Account we find tha the Cost Centers are not getting displayed in the GL Account display. However, when we check the documents, we find that the Cost Centers have been maintained in the document entry. The users have selected the field Cost Center thru Change Layout, but the report still does not show the Cost Centers.
Could you help and advise what needs to be checked.
Regards,

FAGLL03 has many "small" items that do not generate correct results.
You need to look at alll the applicable notes, including the following:
946998,1063198,1107639,1113114,1163346,1223997,1332265,1361048,1391665. You may think these do not apply, but they probably represent things you just haven't run into yet.
Good luck!

HT204093 the body of my email does not appear to the right when I select a mail message.

The body of incoming mail messages do not appear to the right when I select a mail message?
Anybody know how to adjust this?
Jgm

Hello!
Please try these steps: Can't see email message content

Text messages sent from or to my iPhone do not appear on the Verizon Messanger web app.

iPhone text messages do not appear in the Verizon Messenger web ap. Any Ideas why this happens? All other text messages I can still receive!!!

If you are referring to iMessages, they won't show up in the Verizon Messages app since they don't go through Verizon's servers, they go through Apple's.

My email is listed but it does not appear in the main window so I can read it

I get a list of my email but the message does not appear in the window. How can I get the whole email to appear when I tap on it?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

KB05382: Messages sent from Microsoft Entourage do not appear on the BlackBerry smartphone

KB05382: Messages sent from Microsoft Entourage do not appear on the BlackBerry smartphone
Resolution: This is a previously reported issue that has been escalated internally to our development team. No resolution time frame is currently available.
This has been a reported problem for years...resolution has always been the same...assume because they are not actively looking for a fix...anyone know of an ETA on a resolution or any workaround?

Not that I am aware of.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I've forgotten your password Baymel icloud when my resend the message does not appear anything and I can not activate the device

I've forgotten my password on icloud when i resend the message does not appear anything and I can not activate the device
any one help plz :'(

IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPod Touch User Manual for iOS 5

Alv is not appearing in the same Selection Screen

Hi people..
First time using cl_gui_docking_container.
I have a problem, my alv is not appearing in the same Selection Screen.
is there somethign wrong with my code? it doesnt even show a dump or catch.
Regards
DATA: lo_dock TYPE REF TO cl_gui_docking_container,
       lo_cont TYPE REF TO cl_gui_container.
DATA: gr_table      type ref to cl_salv_table,
       gr_functions type ref to cl_salv_functions,
       gr_display    type ref to cl_salv_display_settings,
       gr_columns    type ref to cl_salv_columns_table,
       gr_column     type ref to cl_salv_column_table,
       gr_sorts      type ref to cl_salv_sorts,
       gr_agg        type ref to cl_salv_aggregations,
       gr_filter     type ref to cl_salv_filters,
       gr_layout     type ref to cl_salv_layout,
       color         type lvc_s_colo,
       key           type salv_s_layout_key.
   SELECT * INTO TABLE tbl_datos_items FROM zsd_micros_bd.
CHECK lo_dock IS INITIAL.
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = sy-dynnr
         ratio = 70
         side = cl_gui_docking_container=>dock_at_bottom
         name = 'DOCK_CONT'.
     IF sy-subrc <> 0.
       MESSAGE 'Error in the Docking control' TYPE 'S'.
     ENDIF.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( )

Hi ,
First you have to create you own screen ( dynpro ) with a screen number ( 0101 for exemple ) , you need to pu a custom control in it , name the custom control ( lo_cont )
For the screen created you need to create a module for the PBO , in this module you sould put you code for displaying the liste :
Module STATUS_0101 output.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( ).
Endmodule.
and give the screen number when calling lo_dock
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = '0101'.
tested
Regards

Messages typed not appearing on the QWERTY display...

Similar Messages

Maybe you are looking for