Messages window (Command-0) not showing up?

Does anyone know how to get the Messages window (Command-0) to show up automatically when it's closed and a new message comes in? 
I've been missing a ton of messages since installing ML because I don't check the notification list every 2 minutes, and the Messages screen doesn't pop up automatically after I close it and a new message comes in.

Yup, this just happened to me too, and I came here looking for a solution.
The old way worked so well: new message? new window appears. Now I eventually noticed from the dock badge that someone has been talking to me, but otherwise I wouldn't have known.
I'd also love to automatically have separate windows for each conversation, instead of manually clicking Open Chat In Separate Window each time, but maybe that's a subject for another thread!

Similar Messages

  • Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    Hi,
    How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
    In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
    Get-MailboxFolderPermission -Identity
    CEO’s email address:\Calendar -User assistant’s email address
    Also check with:
    Get-Mailbox -Identity CEO’s mailbox
    | fl *GrantSendOnBehalfTo
    Please let me know the result.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Trying to upgrade an itunes download and getting error message "windows installer did not finish as expected.  contact person or vendor"

    trying to upgrade my ITunes for my Iphone and cannot access content.   During upgrade getting message "windows installer did not finish as expected..contact vendor"

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message  Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge

    I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message  Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.

    I have used PCs for years, and still do at work.  But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself).  It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI.  I have no experience with Win8.  Here are my thoughts:
    1) You can get a good computer using either a Win8 machine or a Mac.
    2) You will pay less for an equivalent PC.  But not as much less as some would have you believe.  You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display.  And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
    3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
    That said, I think some things are easier on the Mac.  For example, GarageBand is a standard part of the Mac SW installation.  I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap.  I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way).  You can do the same on a PC, but you have to purchase the SW from somewhere.  And, it probably isn't cheap.
    I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
    I would not return to a PC for my own use, given a choice.  But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
    So, there you go.

  • Play to order command does not show--help

    When I rearrange my ipod shuffle list and do control click on a song for the shortcut menu the play to order command does not show up i the menu. The menu does not look like what was in the other post. I am frustrated because I listen to audiobooks... and need them in order.
    The menu has lots of options, but not the play order command. HELP.

    Hello Beth,
    Unfortunately, Apple didn't consider that some people might buy a shuffle but want to use it in normal ways. I'm not using iTunes anymore... it causes more trouble than help. But I remember iTunes arranging the music on my shuffle in the order items were put there. Why don't you try it?
    Kahlil

  • Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band.  Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls.  Help?

    Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band.  Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.)  Help?

    Try this fix posted by Robinson Collins:
    Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
    Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
    It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

  • Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

    We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
    Is there a way to configure this for all users with the customization wizard or another method?
    We also need to do the same for "Do not show edit warnings"
    If these are registry keys, which registry keys set these options?

    Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
    If that doesn't work and there's a configuration item in the preferences UI, do this:
    Get regshot.
    Close everything but Acrobat/Reader.
    Take a reg shot.
    Configure the setting via the UI.
    Tak another reg shot.
    Compare the two.
    That process will give you your answer.
    If there is no corresponding pref in the UI, then you probably can't do it.
    Ben

  • Command is not showing in to the list on pressing menu button on the device

    Hi Everyone,
    I have developed a midlet in which I have designed buttons or links using Custom Items. Command associated with the custom item is not showing in to the list on pressing menu button on the device 8300 Curve.
    For example - My login screen have SUBMIT and RESET custom items. I have designed them to be appear like links [no matter how I design them]. I have also added a command and listener to it like as below:
    CMD_SUBMIT = new Command(text, Command.ITEM, 1);
    setDefaultCommand(CMD_SUBMIT);
    setItemCommandListener(this);
    On running the midlet, my login screen appears. But when I travarse to the SUBMIT item, and press the menu button, my command doesnt appear in the list of commands. It shows only the Close command. I am not getting why this is happening.
    Please do me a favour and help me to sort out this. On other phones like 8520 curve the command is appearing in to the list when I press the menu button.
    Regards

    Is there any way to sort out this issue? I am not getting the cause
    behind this, and I am observing this only on 8300 Curve. On most of
    there phones [though not tested on every one] it is working as expected.
    Please guide me to proceed further. I am desperately waiting for the
    response. Regards.

  • Windows Vista Computer not showing up in finder

    Hi, my WIndows Vista computer is not showing up in finder under Shared. I can connect to my PC from my mac by clicking on finder, go, connect to server and typing in the PC's IP Address, Username and Password. I can also see my Mac computer from my PC running Windows Vista.
    What's weird is that it was showing up for awhile but I recently changed my network key and unchecked file sharing on both my Mac and PC.
    Afterwards I re-enabled file sharing on both my mac and Vista computer but my PC won't show up in finder.
    I can connect to my PC and see the computer in finder but when I click eject, it disappears. I would like it to remain in finder. Is there some setting that I need to enable? Please help

    Assuming that the missing machine is part of the same Workgroup/Domain:
    Open Terminal and enter "nmblookup -M workgroupname" (without the quotes, and replacing workgroupname with the name of your workgroup or domain.
    This will list the IP address of the machine that is the "master browser" of your network. If you are on a domain, the address should be that of your domain controller. There should only be one ip address listed.
    You can then get that machine to list the shares that it see on the network by entering:
    "smbclient -L ipaddressofmasterbrowser"
    You should be able to just press enter when it asks for a password.
    This will list available shares and servers.
    Regards,
    Rodney

  • Windows 8.1 not showing up in WSUS 3.0 SP2 Windows 2003

    As the title says really, all Windows 7 etc work a treat, but any Windows 8.1 are not showing...
    Any ideas peeps?
    many thanks
    Kev

    Am 04.09.2014 schrieb kevin_cambs_uk:
    As the title says really, all Windows 7 etc work a treat, but any Windows 8.1 are not showing...
    Get they W8.1 Clients the same GPO Settings like the W7 Clients? Pls
    verify the sttings direct on the W8.1 Clients. If the settings are
    there, pls look in %windir%\WindowsUpdate.log for Errormessages.
    Servus
    Winfried
    Gruppenrichtlinien
    WSUS Package Publisher
    HowTos zum WSUS Package Publisher
    NNTP-Bridge für MS-Foren

  • Itunes on Windows 8.1 not showing imported music

    Upgraded my computer from Windows XP (32 bit) to Windows 8.1 (64 bit)
    On itunes on the XP machine, Organized all iTunes music together. Exported library and then copied to an external drive.
    On the Windows 8.1 machine, downloaded and installed iTunes. Copied the iTunes files from the XP machine to the 8.1 machine.
    Started iTunes on the W.8.1 machine. Shows and plays all the playlists and albums that have been purchased from iTunes. Does not show any of the albums that were imported from my CDs. Looking at the iTunes music folder, all the imported CDs and there contents are listed in the folder. iTunes is just not picking them up when it shows the albums and playlists. I think it may have something to do with Apple's copyright check and iTunes is ignoring imported CD. How do I get iTunes to recognize and show the imported CDs? Thanks

    iOS: Device not recognized in iTunes for Windows

  • Windows 8.1 not showing newly added printers

    Hey guys,
    I just added a new printer to a Windows 8.1 (Surface Pro 3) everything went fine but it never showed up in the printers list, so I tried to add it again and it wants me to give it the name as Copy 1, that to me says it's already there, but it's not showing.
    Any ideas?
    Thanks.

    Hi,
    As mentioned by Robert, you could try "Get-Printer" in power shell to check printer list.
    Also could you ping your network printer or it was a shared printer?
    more information about Get-Printer in power shell
    https://technet.microsoft.com/zh-cn/library/hh918358.aspx?f=255&MSPPError=-2147217396
    Regards,
    D. Wu
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 7 drive not showing up in start-up screen

    So as you can see the picture on top, it's a picture of my bootcamp and I have installed windows 7 but the problem in here is that my drive of windows 7 in the start-up screen (when you press alt/option when the computer turns on) would not show and I tried installing my windows for about 7 times again and again becuase it would not work does anybody have the same problem or got through this problem? please help

    yeah, I had a feeling it might be Tuxera causing it, wanted to see if there was another solution other than uninstalling it.
    I tried disabling it in the pref pane and that didn't fix the issue, so I'm assuming it would need to be uninstalled.
    As long as I am able to boot into Windows when needed (which isn't very often), I'm not too concerned.  Its a little inconvenient to have to hold Option during startup to do it, but it works.
    Whats annoying too is that when using BootCamp control panel in Windows to restart into OSX, it boots into the emergency partition for Lion instead of Lion.  So, guess holding Option at startup is the only option both ways!
    Thanks for the help.

  • Messages from others are not showing in the correct order.

    I can send a message from my iPhone ... and it will show up at the bottom of the conversation in Messages on my Mac as the most recent message. But when I receive a reply, it does not show up as the most recent message.  Instead, it appears further up the conversation in the past.
    Anyone else having that problem?  Is there a fix?  Thanks!

    Hi,
    Unfortunately this seems to happen.
    It is more noticeable when the Mac has been Off line (Shut Down or Sleep) and a conversation or two has been happening on an iOS device.
    When the Mac gets turned On Messages tries to catch up.
    These iMessages play out like a speeded up chat but are not Instant.
    Consequently any further parts of the conversation then get placed in between and out of sync.
    Jabber  and AIM IMs are times stamped and it would appear that the iMessages ones are as well
    What does not seem to happen with the iMessages ones is the App using those Time Stamps to put them in order again.
    Currently there is no fix (other than keeping the computer On and Awake)
    9:55 PM      Thursday; November 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Messages from POP account not showing up in IMAP account folders

    I've posted on this already, but I'm a little clearer about what the issue is, so I'm gonna try again.
    I'm using Mac Mail. Recently my ISP assigned me an IMAP account. [Customer service says "we only use POP," but I can't get a POP account.] Messages in my mailboxes show up fine. I'm having difficulty with the mailboxes directly associated with the account---Inbox, Sent, Draft, etc.
    I have only one Inbox. There are three Sent folders---the one that is always at the top of the sidebar, and two in an IMAP-specific set of folders. I coped the older messages from the POP account into what I thought were the corresponding folders of the IMAP account. Copied messages appear only in one of the IMAP Sent folders. However, when opened, they have no content. In some cases there is an indication that the content is "loading" but nothing ever appears.
    Is it possible to get the older messages from the POP to show up with content in the IMAP folders? I gather from reading related threads from the archive that copying messages between account types should not be a problem, but it is for me.
    Thanks,

    Well, I thought I found a solution in the archives here: Import the old messages from within Mail. Had no doubt that would work. Well, it didn't. Though all the old messages were Apple Mail messages, when I tried to import Mail said, "No valid Apple Mail files were found." Tried importing them as mbox files. Same result.
    IMAP has advantages for people who check mail from more than one device, or for multiple users of an account. Not having been forwarned by AT&T that I was going to be switched from POP to IMAP, it has been a big headache for me. And it clutters up the sidebar with a changing collection of folders, including many that seem redundant, and some whose purpose I can't, in my ignorance, imagine.
    Supposed to get a call today or tomorrow from a unit in AT&T that is "specially trained" to handle problems like mine. We'll see.
    I sure would like to get help from somewhere.

Maybe you are looking for