Messaging 6.x general questions

hi,
just some general questions -
(a) is there a netbackup agent for doing messaging backups and message level restores (e.g. like the one for exchange). I know solstice backup has a backup agent somewhere but not sure about netbackup. any experiences with this?
(b) is it possible for messaging/calendar to authenticate users off a different directory? i.e. just use the uid/password info from another directory i.e. novell edir. it seems like directories and ldap were supposed to make all this simple, but getting a product like messaging that is "supported" against another directory isn't in reality.
Also organisations don't seem to like having to only use messaging against sun directory as a selling point sometimes when they already have a directory. Any thoughts/experiences?
thanks

A: imsbackup may be used with many backup packages. Granularity down to the individual user. Imsbackup/imsrestore is the recommended backup/restore technique.
B: No. Messaging Server was not designed to store part of the authenticatio data in one ldap and the rest in another. You could use Meta Directory to synchronize a portion of your other ldap to the one Messaging uses.
Some customers have successfully deployed against other Directory server, BUT . . .
1. The installer uses non-standard, propriatary stuff, and will fail against non-sun directory servers.
2. If there is a problem after ou successfully get install done, and you call tech support, the burdon is on you to prove that the problem is within how Messaging Server works, and is not with the non-sun directory server. So far, we haven't found any such to fix, though. I think there may be one or two customers using non sun DS.
In most cases, Meta is able to sync their ldap system with ours, and that works much better. Directory Server is the most popular LDAP server around, far as I know.

Similar Messages

Newbie question - general question about e-mail sync

Hi,
I have a general question about email sync and BlackBerry smartphones. Are there any devices that allow email syncing with a Microsoft Exchange 2007 system that do not require the BlackBerry Enterprise server?
Thanks; sorry if this has been asked before but I was unable to find it in the forums, documentation, etc. Everything I found assumes that for this kind of environment you will be using a BlackBerry Enterprise solution, but I can't assume.
Thanks again.
Solved!
Go to Solution.

Hi and Welcome to the Forums!
If the Exchange server has anything that faces the internet (OWA, POP, IMAP), then BIS can be used to handle email (only email...calendar and contacts require BES to sync OTA).
Or, a PC, inside the network (but with an internet path) and logged into the email server (using Outlook), can be left running, using the RIM Desktop Software's Desktop Redirector capability to forward messages to the BB.
Those are basically the options.
Hope that helps! Let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Migrating from procmail to sieve, general question

Hi,
I want to migrate a Mail-Server from 10.5 (postfix, procmail, cyrus) to 10.6 (postfix, sieve, dovecot) and have a general question about sieve.
The current setup on this server is quite complex with procmail-rules.
But there is only ONE procmailrc which delivers the mails as wanted (about 120 Pages of rules).
It looks like procmail isn´t maintained any more and I want to use sieve.
I read a lot of infos about sieve but can´t find an answer to this question:
"How to setup sieve to use only one sieve-script-file for all incoming AND outgoing messages?".
The above mentioned procmailrc handles incoming AND outgoing mails (e. g. Mail TO AND FROM customer X is also delivered to all users being in the group X (these groups are maintained in a FileMaker-solution and the procmailrc is created via a Script in FileMaker)).
With procmail I only had to set up the /etc/procmailrc to include "my" procmailrc. I didn´t need to setup procmailrc-files for every user (about 80 user with a quite high fluctuation, so this is not an option).
Where is the config-file I need to add an "include "my" sieve-script" with all rules (as I did with procmail)?
Does Sieve also handle outgoing Mails?
Many thanks in advance
Sven

push

Validation General Questions

I have a couple of general questions on validation.
1) I have a text field defined as a "Required" field (it is using the form_required template). Must I also create a NOT NULL validation on this field as well? It seems that I should not have to do this. However, if I do not create this NOT NULL validation, then clicking on a Submit button while this field is empty is not generating any error message. But when I include a NOT NULL validation, then I do get an error message.
2) This question is related to the first. I tried creating a regular expression validation on my field in which I use the pattern
[[:alnum:]]{1,}[|$#&_?]+
The field should allow the user to type-in a string consisting of 1 or more alphanumeric characters (it could be a foreign language characters as well)
and 1 or more special characters like $ or #.
I thought this would also generate an error message if the user clicks the Submit button while leaving the field empty. But, again, I get no error message. Why?
Thank you in advance for any insight on this.

Thanks very much, Justin.
When I saw the regexp_like() function in your reply, I am wondering if, perhaps, you might also have some insight into how I can ckeck if a field contains non-English type characters (i.e., mult-byte characters). I already posted a question about this an hour ago but have not gotton any replies as yet. In my post I asked about using the regular expression pattern [[:alnum:]] since the docs state that this will check for mult-byte characters. And so, I thought if perhaps there is some function I might use to return a boolean TRUE if a field contains non-English characters versus a FALSE if it contains only English characters.
Any insight in this would be most appreciated.
Thanks again for your help.

Asking general questions about 'computing' matters.

Hello
I'm new to the Mac world - I posted my first question on the forums today!
I have reviewed the discussions site - everything seems very specific to apple products. Where, if anywhere, could I post a general question - like this one:-
I have a notion that when one connects to a server directly (Usenet newsgroups for example) one makes a deliberate 'hole' in one's firewall, be it software or simply because one is using a NAT router. Sending messages to and receiving posts from Usenet is far quicker than using email, so I'm fairly confident that this is so.
I am well aware that any URL one visits can instantly determine much information about the connecting machine. (see http://www.browserreport.com/ as an example).
Anti-malware programs can only detect known viruses and spyware - I see no reason at all why, once one has granted a direct connection facility, between a group on a private server to
one's own machine, malware could not relatively simply be injected onto one's computer.
If the malware was currently unknown, how would one ever know?
Thanks in anticipation of a helpful response
David B

HunterBD wrote:
I'm new to the Mac world - I posted my first question on the forums today!
Excellent!
I have reviewed the discussions site - everything seems very specific to apple products. Where, if anywhere, could I post a general question - like this one:-
Unfortunately, not in this forum. This forum is specifically about the discussion forum itself. It is kind of like a meta-forum. Hopefully, the moderators will just move your post somewhere more appropriate. (As indeed they just did!)
I have a notion that when one connects to a server directly (Usenet newsgroups for example) one makes a deliberate 'hole' in one's firewall, be it software or simply because one is using a NAT router.
Kind of and kind of not. Firewalls are greatly misunderstood. But essentially, yes, any internet connection you establish has some risk involved. However, the risk of making an outgoing connection is infinitesimally smaller than setting up a server to let hackers bang on 24x7.
Sending messages to and receiving posts from Usenet is far quicker than using email, so I'm fairly confident that this is so.
Really? I don't think so.
I am well aware that any URL one visits can instantly determine much information about the connecting machine. (see http://www.browserreport.com/ as an example).
Not really. It depends on what you are doing. You always give away your IP address, unless you are behind a proxy. In that case, you give away the proxy's IP address. But the proxy still knows who you really are.
If the protocol in question supports such information, then it can be determined. A web browser does send some information about you, but you can easily change it and masquerade as some other browser. With other protocols, it isn't so easy to tell what kind of OS or software is being used.
Anti-malware programs can only detect known viruses and spyware - I see no reason at all why, once one has granted a direct connection facility, between a group on a private server to
one's own machine, malware could not relatively simply be injected onto one's computer.
If the malware was currently unknown, how would one ever know?
You wouldn't
Don't grant anyone direct connection to your machine.

General question regarding "parallelism" of iPhone execution

I've got a general question and hope somebody can shed some light on this.
While I'm relatively new to iPhone development I've been in software programing for more than 15 years now and have a solid background in Java, C, C++, C# and other languages. I've created a couple of applications for the iPhone, easy and complex ones, some using UIKit, others using Open GL and Open AL. With that said I think it would be fair to say that I know pretty much what I'm talking about.
For those who tend to refer everybody back to the Apple Samples or PDF guides, please believe me, I've read them all.
Here's my "question":
I occasionally ran into a situation where I got the impression that code on the iPhone got executed in a "non sequential" or "parallel" manner even when I did not explicitly created threads. I'm not referring to code buried in a framework or so, I'm talking about code I've written. (English is not my mother tongue, so please excuse me if my explanation might be somewhat difficult to understand.)
I try to give an example. Assume a code snippet like this:
_gameEngine = [GameEngine alloc];
[_gameEngine initSomeStuff];
In my understanding the second statement (the initSomeStuff) gets executed once alloc returns and _gameEngine for sure is a valid pointer. Is that fair to say? I sometimes got the impression that the iPhone starts executing code without waiting that a method returned.
I had similar issues when I tried to show an ActivityIndicator while another method was doing a lengthy operation. Pseudocode like this:
[_activityIndicator show];
[self longLastingOperation];
[_activityIndicator hide];
In code like the one above: Can I be 100% sure, that the hide message is not sent until longLastingOperation returns? I ran into a situation where I had the impression that show and hide got called immediately without waiting until longLastingOperation returned.
Final example:
[self performSelectorOnMainThread:@selector(doSomething) withObject:nil waitUntilDone:YES];
[self nextStatement];
-(void)doSomething {
[self longLastingOperation];
1.) In the above code, I understand the idea is that doSomething will be executed on the MainThread and that nextStatement will in no way be executed before doSomething has returned. Is that true?
2.) doSomething is supposed to run on the MainThread but does this hold true for longLastingOperation, too? Or could it be that longLastingOperation WITHIN doSomething gets dispatched to another thread and doSomething returns PRIOR to longLastingOperation been finished?
This might all sound pretty wired but as I said from time to time I ran into a situation where I got totally confused as to how stuff executes in – or out of – sequence. I helped myself with using NSNotificationCenters etc. but I'd like to understand what's going on in detail and crystal clear here.
Your help is more than appreciated.
Thanks,
R.
Message was edited by: BeSharp

It is never safe to assume that any allocation was successful, and while it's incredibly unlikely that you're running into any such situation, it's entirely possible for a formal protocol to declare that a given message send should return immediately without waiting around:
http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/Articles/ch apter13_section_8.html#//appleref/doc/uid/TP30001163-CH9-BAJIGHAF
An "impression" doesn't prove much unfortunately, so I'd recommend getting friendly with the debugger to see what's really going on.

General question on SQL Server 2000 to Oracle 10g

Hello all,
I just have a general question on migration from SQL Server 2000 to Oracle 10g using SQL Developer.
How does it migrate Users with proper privileges from SQL Server to Oracle? Follow the interface steps? Or should the users be created on destination Oracle side?
Thank you.

Hi,
It depends which type of migration you are making.
For a 'Standard' migration when you migrate data a 'create user' statement is created as part of the migration and you will see this in the generated code.
If you are using the 'Quick' migration option then you need to create the Oracle user or use an existing user to receive the data.
Your best option is to review the documentation available from -
http://www.oracle.com/technology/tech/migration//workbench/index_sqldev_omwb.html
or directly from -
http://download.oracle.com/docs/cd/E12151_01/index.htm
and then get back with specific questions if this does not give you the information you need.
Review the chapter -
2. Migrating Third-Party Databases
in -
Oracle® Database SQL Developer User’s Guide Release 1.5
Regards,
Mike

Report Builder Question - OA AR Aging - and a general question

I'm sure this is the wrong forum for this question, but I thought there might be someone here who might be using Oracle Applications and Report Builder who'd be kind enough to help me out.
We've recently implemented Oracle Applications 11.5.10 and I have to use report builder to change the Accounts Receiveable Aging (7 bucket) to a 5 bucket report. I've already made some changes to the seeded "ARXAGMW.rdf" report, but I'm not a big Oracle Reports guy. I've stumbled through making some changes in various other reports. But this one is just plain nasty! :)
I was thinking that I could simply add buckets 6 & 7 to bucket 5, then just hide or delete the 6 & 7 buckets. But I'm not sure where to even start. Any help with this would GUARANTEE a Christmas or other holiday card this year! :)
I really want to keep this simple as possible, so any help would be very....helpful. :)
Oh, my general question is: Are there any resouces/books for Oracle Reports (Report Builder)? I feel so lost trying to modify existing reports, let alone creating new ones.
Thanks again!
Steve

Hi Steve,
I am working on the 7-bucket aging report and i want to add a new field in data model.
As the query is build dynamically, i have modified the function BUILD_CUSTOMER_SELECT to meet my requirements.
But the problem is that in the data model, the field is not present in my Grouping. and if I try to add the field in the Data Model query (Q_ Customer) section,
i get the following error: ORA-01789: query block has incorrect number of result columns.
The query is as shown below:
select rpad('a',50,'-') short_cust_name,
0 cust_id,
rpad('a',30,'-') cust_no,
rpad('a',500,'-') sort_field1,
rpad('a',40,'-') sort_field2,
0 payment_sched_id,
rpad('a',32,'-') class,
sysdate due_date,
0 amt_due_remaining,
0 days_past_due ,
0 amount_adjusted,
0 amount_applied,
0 amount_credited,
sysdate gl_date,
'x' data_converted,
0 ps_exchange_rate,
0 b0,
0 b1,
0 b2,
0 b3,
0 b4,
0 b5,
0 b6,
rpad('a',25,'-') bal_segment_value,
rpad('a',500,'-') inv_tid,
rpad('a',32,'-') invoice_type
, 'y' parent_cust --I WANT A NEW FIELD HERE TO BE VIEWED ON THE REPORT LAYOUT LATER
from dual
where 1=2
UNION ALL
&common_query_cus
Did i missed somthing 4 me to be able to add the field here?

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

Previous Photos In Messages Not Showing (Blue Question Mark)

Previous Photos In Messages Not Showing (Blue Question Mark)
iPhone 4s, updated to iOS 8.1.1, and now previous photos in messages (imessage & text) show as blue question mark.
Not viewable in details (view) either. However any new photos sent or received are viewable. PLEASE HELP!!!
(MMS is turned on & over 5GB of free space on phone)

I have the same issue. Does anybody know how to fix it?
It is really annoying... I chose iphone to be ensure about functionality and stability of this product.
Any help appreciated.
IOS. 8.1.1 iphone 5s

General Question on Proxies

Hi,
I have few general questions....
How to decide which proxy to be used: Java or ABAP?
What are the deciding factors?
Which one is better when it comes to performance?
Regards,
Rajani Kumar

bump

Where to direct a general questions about foreign films subtitles?

I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTunes and they more than happy to refund the money back to my account. Now after a few weeks, the iTunes store DOES list Eng subs for this film. I don't want to purchase it again and have to contact iTunes for another refund...Therefore my question is, is there a general question contact one could use to find an answer to my question. Basically, to verify that this movie, indeed has English subs before I re-purchase.
Any info is appreciated!

Yes I know as the [https://support.mozilla.org/en-US/questions/ Questions] section is more for desktop Firefox support and the place I linked to is for "Firefox OS" support in English where some who are involved with it do post in it occasionally.
I would have moved that [https://support.mozilla.org/en-US/questions/962783 thread] to the "Firefox OS" English section, however I cannot as the [https://support.mozilla.org//questions/ Questions] and [https://support.mozilla.org/forums Contributor Forums] are not the same.

Camileo charging problem (solved) and a general question!

Hi all!
First of all, I was going to ask for help as to why the Camileo S10 was not charging (the orange light wasn't flashing), and I'd seen a few people with similar problems.
The solution?
Give the contacts on the battery a clean.
The insulation sticker that comes on it must leave some kind of residue on it, and it's enough to prevent charging. Now it's flashing away happily :]
So my general question was, is it possible/advisable to use the camera on the mains?
Rather than constantly draining and charging the battery during long shoots, I'd prefer to just leave it plugged in!
Thanks very much in advance!
Paul

Hi
I think the battery handling is always the same no matter what product it is
From time to time the battery should be recalibrated.
This means that the battery should be discharged fully and after then you should charge it again until the battery would reach 100%
I do this with all my batteries; mobile phone battery, digi cam battery and notebook battery.

Update on Bioinformatics WIKI, scripting challenges, and a general question

I am waiting for my site to go on-line at Oak Ridge National Labs (USA, Tennessee). Should be another week or so, maybe less.
When that happens, you will see a veritable explosion of scripting challenges in my wiki (Emerging Technologies->Bioinformatics.)
One general question in preparation for these challenges.
There are a number of standard bioinformatic programs that can be run interactively via the web at various sites, e.g. "BLAST" and "STRIDE".
Although these can also be run locally, this requires that you download large databases and keep them updated.
So here's my question to the scripting experts:
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Bill Mann has used PERL to do some of the required regex parsing, but there is a lot left to do, and, his stuff only works when a perl program is invoking a bioinformatic program locally, not interactively.
If so, we all can do some beautiful stuff together , if anyone is interested ...

...my wiki on...
There is by it's very nature no such thing as MY WIKI, except you run your own wiki project in an exclusive mode. Which were...well ... unusual.
Are scripting languages powerful enough to submit queries to web pages and then use regex's to parse the html that is returned?
Yes.
anton

Delete scriptcode - General question: capacity limit of Acrobat Windows

Hello everybody,
I've got a general question to the capacity limit of Acrobat Windows.
I often make forms with
for instance the current one has 18 pages. Eleven pages have fields on it. (But some pages have only one field on it) The fields of one page to another are sometimes linked with script code. The file needs nearly 1 MB.
Usual I write the script code by a double-click on the field/ calculate/ custom calculation script. (Is this the right way?) Today it happens again that a field with script code lost the script code.
That's why I wonder whether there is a capacity limit of Acrobat Windows or whether I make mistakes. (This is only one instance of several where the form has his own life.)
Thanks in advance for helping me!

http://forums.adobe.com/community/acrobat/acrobat_scripting

Messaging 6.x general questions

Similar Messages

Maybe you are looking for