Messaging Express Issues / Solutions

We are having loads of problems with users with various types of ad blockers and popup blockers, much like this: http://swforum.sun.com/jive/thread.jspa?forumID=15&threadID=21746
Due to the nature of the various combinations of browsers/patches/ad blockers/versions/operating systems that users have been using, it�s been hard to diagnose the multitude of combinations of things that are affecting it.
The one thing we do know, is that 'compose', 'reply' and 'forward' buttons are the ones that are effected by these blockers - these are the buttons that 'popup' windows.
This is incredibly annoying for us, and for the users - they are well within their rights to use ad blockers, and they shouldn't expect it to block legitimate applications.
So, enough with my gripes, and a few questions:
- When is Sun going to develop a J2EE web application for their mail product? I heard a rumour that this was in the works, but we are still stuck with the horrible (and very slow to load, hard to maintain/debug) server-side Javascript.
- Has anyone had any success in not using Messaging Express, and made available an open-source webmail client for their users? Perhaps, something like Horde? Was it easy to implement? Any Success stories? Failures?

Mainly the problems have been related to the fact that the client uses server-side Javascript. As everyone knows, javascript does vastly different things over different browsers (and different OS's) and is causing alot of headaches.
Both customization guides (http://docs.sun.com/db/doc/817-6446) in Messenger Express 6 and Communications Express 6(we dont use calendar anyways..) still seem to rely heavily on similar Javascript from what we are using with 5.2.
Are there any plans to move away from this?

Similar Messages

HT5655 I just downloaded the lates version of flash and I am still getting the same Blocked Plug - in message. Any solutions to this issue?

I just downloaded the lates version of flash and I am still getting the same Blocked Plug - in message. Any solutions to this issue?

Quit and relaunch Safari and the new version should work.

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it ha.... see detail

Running Mac 10.5.8 Updated to FF 8.0 - keeps crashing whenever FF opens - can not launch safe mode either - looks like many people here are having same issue - solutions all keep saying it has something to do with roboform 7.6.2 (which is for windows) or the profile. I have created new profile and updated the mac roboform - still no luck - have sent in MANY crash reports with no response ( one was Crash ID: bp-0eea6eb2-aba3-478a-bfb1-8f00d2111110 ) - anyone else find solution other than roboform or profile, or how do i get back to prior version?

Any suggestions?
My mail is still not functioning and crashes everytime I open it or check archived messages.

Trying to activate FaceTime and/or iMessage, I get an error message. Any solutions?

Attempting to activate FaceTime or iMessage on my iMac, I'm getting error message. Any solutions?

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait for it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Is there a way to avoid a iPlanet Messaging Express home user to copy from the email message ( email content ) body and paste on to a local place( it Hard disk, for an ex )?

Is there a way to avoid a iPlanet Messaging Express home user to copy and paste email body content and avoid attachment deliver attempts?Cause this could grant home users to take ownership of enterprise's documents, sending to them selves and after that, in their own homes, they access Messaging Express, recieve their email with the forbbiden content and then copy and paste to it's own's hard disk.

It may be possible, but then what would prevent the user from running a "screen grabber" to capture the data. The underlying question that you need to ask is, "Who can you trust?" If you're concerned about confidential documents being stolen/disclosed, then that is where your security starts. If someone can't access a document, they can't E-mail it or transport it elsewhere. Who says they can only use E-mail? Using ftp is more efficient, or a floppy/Zip/Jazz drive could also be used. Trying to "secure" the E-mail client would be like plugging a single hole in a water pipe full of leaks. You have to shut off the water at the source.

WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

Sir,
ply let me know after saving the po i want to know what all messages were issued while creating the po.
Like "warning" or "information" message
where can i see this
regards
amey

Hi,
PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
Here are few message type:
Contract has different purchasing organization &     W
Validity period of contract does not start until &     W
Validity period of contract expired on &     W
Target value of contract & exceeded by & &     W
Net price for item & taken from conditions     W
Purchase requisition & item & already deleted     W
Scheduled quantity & & greater than target quantity & &     W
Quantity smaller than invoiced quantity &     W
Target quantity exceeded by & &     W
Not possible to determine a consumption account     W
Release date lies in the past     W
Base unit of measure & adopted from material master record
Release date: next workday is &     W
Contract target value & reached     W
Please only use plants with company code &
Order unit copied from material master record     W
Hope it helps.
Utsav..

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Errors Message while issuing the material in MB1A i.e unrestricted material

Hi Expert,
I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
Regards,
Ram Rathode

You are not clear. What is the error message that you get?

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

Does anyone knows how to install Iplanet Messaging Express under iWS 6.0

Does anyone knows how to install Sun One Messaging Express in iWS 6.0?
I have a server which has been installed with iWS 6.0 and another server which installed Iplanet Messaging Server 5.2.
anyone can help me on this?

The Webmail interface for Messaging Server is implemented as its own daemon - it's not a CGI or Servlet that runs through another web server. As such it can not be deployed through Sun ONE Web Server (or any other web server).

Messaging Express 3.52: how to enable cc to sender automatically while composing a new email

In Messaging Express 3.52, how do you enable cc to sender automatically while
composing a new email?
<P>
Edit the globals.pl file and set $selfbcc to 1. You will be
automatically bcc'ed on any messages you send.

In Messaging Express 3.52, how do you enable cc to sender automatically while
composing a new email?
<P>
Edit the globals.pl file and set $selfbcc to 1. You will be
automatically bcc'ed on any messages you send.

Messages were issued when costs were calculated (see log)

Hi,
When I am creating the production order ( T Code: co08 , MTO scenarios and with reference to sale order ) but i am getting these error messge.Error when calculating costs see log like:
Messages were issued when costs were calculated (see log)
Message no. CK262
and also iam not getting planned cost .in the production order i saw log worning message like
Object was not costed
Message no. CK060
Diagnosis
The system could not find any entries that are relevant to costing.
System Response
The system did not cost the object.
Procedure
Check whether the following objects should be flagged as relevant to costing:
o     Items in the BOM
Display BOM
o     Operations in the routing
o     Control key in the routing
1. Look at the message log.
2. Check whether a quantity was specified in the confirmation.
pls give me clarification ASAP
Regards
SAPCO

Hi Hisapgaru,
The error on product costing can be cause by several message which can be caused by poor master data maintenance. It does not mean, the error are found on every message line, you have to analyze the material number that involve in the message using the information provided by log message (procedure).
To analyze product costing in a comprehensive way is by using CK11N. By this t-code you can display the product cost result from 3 pespective: Cost element, costed BOM or cost component.
You can event check the product costing parameter from this CK11N/CK13N(display product costing). Without doing analysa to product costing, you cannot point out what cause the problem.
Solve the problem from product cost planning side first, then after calculation free of error, you can go back to production order activity.
Best regards,
Irhasni

Problems to autenticate users with Messager Express.

Greetings,
I'm relatively new to iPlanet MS. I have IMS 5.1, Directory Server 4.13 and Delegated Administrator for Messaging and Collaboration 1,1.
When I create an user into of a domain diferent to the default domain with iDA and I try the Messager Express with this new user, I receive the following error:
Invalid user name or password
This is the LDAP tree:
org.org
|
Organization 1 (default domain)
| |
| People --- user1
| Group
| |
| Organizacion 2
| |
| People -- user2
Organization 3
|
People --- user3
Any user who belongs to the organization 1 does not have any problem to use Messenger Express. If user1 send a mail to user2, user2 receive the mail. user2 (or user3) can to use Calendar Server, but does not the Messenger Express.
How I can resolve this problem ?
Thanks in advice

Frank,
First, since this is not the default domain, make sure you are logging in as: [email protected] ([email protected]).
Second, take a look at the directory server access log and make sure it is searching for the user under o=org3, o=org.org.
Michelle

Message express

how would one allow a user through message express to access all the other users in the directory server through the the address book?
in other words what is the configuration you need to set up in message express or on the server etc to allow the user to access the directory server for lookup info. I currently have a corporate directory listed with nothing in it and a personal address book.

There's an example of exactly that in the Messaging Express Customization Guide.

SOLAR01 - assign message to issue

In SOLAR01, I would want to assign message to issue, however we could not do so, as when we list the message to be assigned, none could be found.
Strangely, this can be done from transaction SOLUTION_MANAGER > Issue Management > Issues.
Anyone encountered this before ?

Hi,
Since your current stack level is unknown, perhaps this note maybe of interest to you, 1162628
Cheers,
SH

Messaging Express Issues / Solutions

Similar Messages

Maybe you are looking for