"Messaging : feature not supported " ERROR on C7

Hy , a have a prob with my C7 ..After official update to Anna I got this error when trying to open Conversations , and when I receive a text ..it isn't opening.
Solved!
Go to Solution.

Does your messages open in conversation mode or inbox mode? If it opens in conversation mode, it may be that there may be a problem with your conversation app. Uninstall them and reinstall through software update. If that's not available, you may have to reinstall your Anna update. Just perform a soft reset before you try reinstallation method. If soft reset does not help, then go for reinstallation.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Similar Messages

E61 - MFE 2.0 - "Messaging: Feature not supported"...

I have Nokia E61. I was using MFE 1.6.1 which was working great. I have upgraded to MFE 2.0. I am getting an error "Messaging: Feature Not Supported" while reply, fwd, creating new emails. I have tried to reinstall, full resync, reset the device and install again, but the error persists.
Can someone help?

I had that exact error- it was caused by installing an older version of MFE (1.x) that I had on my memory card, not the latest version (2.x).
If you remove 1.x and reinstall 2.x it should work. I was confused because it synced everything OK, but I couldn't open emails!
Cheers
J

Message Format Not Supported - error message

If I receive an MMS message when connected to my Mercedes SAP module I receive a "Not text" SMS message on the car system. When I disconnect from the car I have a txt message stored on my SIM that looks as if it should redirect me to the Orange website to collect my MMS.
The problem is I have to copy the message to the phone memory to read it and when I try to read it I get the "Message Format Not Supported" error message.
Does anyone know how to correct this I don't want to loose any MMS received whilst driving!!
Message Edited by whitenemesis on 16-Mar-2008 02:10 PM

Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

6680 front camera feature not supported error.

6680 front camera ( 640x 480 ) is giving an error feature not supported . what's wrong ??? Camera faulty , software faulty , mobile camera locked ???

The Nokia Software Updater is a Windows application that enables you to update Nokia mobile device software (firmware) over the Internet using your PC. The application can be downloaded from the Nokia UK Product Support Internet pages at
http://www.nokia.co.uk/softwareupdate
The Nokia Software Updater offers the same updates you would receive at a Nokia Service Centre. The added advantage is the convenience, as you can now easily perform the update yourself from any location with an Internet connection, at a time suitable for you. Keep your phone software up-to-date, or fix a potential operation problem you may have by regularly updating your phone firmware.
So you should try to check if there a newer firmware version for your phone first, this may fix your cam issue.
Good luck,
Arabian
We Arab Portal Network http://www.WeArab.Net/
Phones: 9300i, E70, N80, 6670, 6280, and 6111

Gallery Photo sharing feature not supported on Nok...

Hi,
I upgraded my N8-00 with Belle but now I cant able to share my Gallery images on my social network, when ever I click on the share button in gallery it gives message 'Feature not supported'..
please provide necessary fix asap..
waiting for fix and response.
Solved!
Go to Solution.

I finally got Sharing from the Gallery feature working again, although it was much more trouble than should have been. Here's what I tried.
1 Soft Reset (hold down power button untill phone vibrates 3 times) - didn't help
2. Uninstalled Social 1.5 and the Social Installer app - didn't help
3. Tried to find a copy of Social 1.3. Searched the Store, ran Software Update and Nokia Suite Update and did a web search for the Social 1.3 client download but came up empty handed
4. Reinstalled Belle using Nokia Suite. That gave me Social 1.3 but the "Feature not supported" error was still there
5. Hard Reset - Settings > Phone > Phone management > factory settings - This worked and I have Social 1.3 and a working Share icon in the Gallery.
Beware that if you hard reset it will wipe all your data, files and apps from your phone -including everything on E:Mass memory so backup everythig you care about or be sorry.

'Feature not supported' with maps 3.8 update via N...

Nokia suite came up with an update today for the maps, installed, phone restarted and when I open Maps message "Feature not supported" seems like people who have updated are facing problem. /t5/Nseries-and-Symbian-Smartphones/Nokia-N8-Software-Update-Nokia-Maps-with-enhanced/td-p/1205909
Trying to install via beta labs didn't help, when I check application manager I couldn't find maps application anywhere.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.
Solved!
Go to Solution.
Attachments:
Nokia maps v3.8.jpg ‏117 KB

So far so good... do a back-wards re-install from 3.06 after Uninstall of whatever is the BUG
Uninstall what you can see in Applications manager. Start with Nokia Maps, ODML Commons Repository and then Nokia Maps Installer. If you have anything that says Ovi Maps. Destroy it too!
Want to go back to 3.06?
If you would like to go back to 3.06 version, you will first need to un-install these applications from the Application Manager then re-install 3.06.
First, un-install these from the Application Manager:
Check In
Check In Agent
Check In Data
Check In Widget
Create a Place
Drive
Guides
Headless Map and Navigation
Map and Navigation
Map Apps
Maps Settings Plugin
ODML Commons Repository
Nokia (Ovi) Maps
Nokia (Ovi) MapsEngine
Nokia (Ovi) Maps Installer
Nokia (Ovi) Maps ODML
Weather
(Helpful Hint: Unistallation process is faster if you uninstall “Ovi Maps” and “Ovi Maps ODML” first.)
Next, re-install 3.06 from Ovi Store.
So I have uninstalled the BUGGY version.
Uninstalled 3.0.8 BUGGED from Nokia Software Updates and Components. Of course, Drive, Weather and Here & Now cannot be seen in Applications Manager.
Installed ovi_maps_installer_3_06_11wk10_b01_tb9_2_195660.sis
Seems to be working. Maps in F:\ not destroyed so far; maybe in default E:\ but I do not care about what was in E:\ My world map is in F:\
Installed ovi_maps_installer_3.07_11wk17_b04_tb9.2_nocs_beta.sis
Working as well, Maps & Drive... etc.
Now, trying to do this:
nokia_maps_installer_3.08_11wk27_b01_TB9.2_NOCS_BETA.sis
See if it works...
Then, I will try this...
nokia_maps_smartinstaller_3.08_11wk34_b01_TB9.2_NOCS_BETA.sis
Which is the last BETA before this Nokia Software Update.
BTW. ODML Commons Repository is no longer needed. If you find it in your Applications Manager. Remove it after you successfully install upto the lastest Maps available from Beta Labs before this BAD UPDATE from Nokia Software Update.

Conversations Features not supported

after i updated my phone with symbian anna, i open the conversation at messages after that a message appears MESSAGING: FEATURES NOT SUPPORTED. does symbian anna dont support Conversation?? my phone is n8

all i can suggest is reinstall from ovisuite

Getting error message as "Feature not supported" f...

I have made a master reset of my Nokia C5-00.After that I am unable to open my built in Facebook application.It's showing error as "Feature not supported". Because of it my facebook - mobile contact sync is also not enabled. How to resolve it ?
Thanks.

Assuming you already have the latest version, try re-installing the Firmware thru' Nokia Suite ..

GTalk Error: Feature Not Supported

Hello,
I've been using Google talk since I bought my BB Torch 9800. But from last couple of days I keep getting this error that pops up when I'm trying to send messages to my friends "
your message could not be sent (error:feature not supported)"
And then it says the person in question logged out, cause then any message I sent doesn't go through . so then I log out and back in, and the person in question is online and will still give me trouble.
This will happen randomly and sometimes lasts hours at a time. It is kind of frustrating especially because when I have important
messages to send they aren't sent and so much and so on.
More info to the situation:
-I have the version 2.5.33 of Google Talk
-I have rebooted the phone and no change
-I have uninstalled google talk and reinstalled it
Thank you in advance
Kulvirender Singh (India)

Hello Kulvirender,
Welcome to the BlackBerry Support Community.
We suggest that you contact your mobile service provider to verify the settings on your service plan.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Samsung LCD TV "Format not supported" error message?

I have been using my Samsung LCD TV Model number LC320SS9-A for years via a HMDI cable. As of a couple of weeks ago I now get the follow error message, "Format not supported" on the TV. Running 10.8.2 2.3 GHz Intel Core i5 with 4GB DDR3 memory. I know this is really a Samsung issue but I am wondering if anyone else is getting this new message.

Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

Using wall charger for first time I get error message "charging not supported by this accessory." Been using since December and not seen this before.

Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.

Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Getting error feature not supported: expr_agg:

CREATE PROCEDURE "PAYROLLDBTEST".GetWorkingHoursAsFloat
-- Add the parameters for the function here
IN WorkingHours nvarchar(10),
OUT FloatValue float
--RETURNS float
LANGUAGE SQLSCRIPT
AS
BEGIN
-- Declare the return variable here
--DECLARE FloatValue float;
-- Add the T-SQL statements to compute the return value here
FloatValue := (SUM(case when (:WorkingHours <> '0')
then
IFNULL(SUBSTRING(:WorkingHours,0, IFNULL(LOCATE(':',:WorkingHours), LENGTH(:WorkingHours))),NULL)
else 0
end
) * 60)
+
SUM(CAST(IFNULL(SUBSTRING(:WorkingHours, LOCATE(':',:WorkingHours) + 1, LENGTH(:WorkingHours)),NULL) AS INTEGER))
IF(:FloatValue /60.0 IS NULL)
THEN
FloatValue := 0;
END IF;
END;

I am using HANA database.
When i executed above code with SELECT it gives syntax error like :
Could not execute 'CREATE PROCEDURE "PAYROLLDBTEST".GetWorkingHoursAsFloat ( -- Add the parameters for the function ...' in 1 ms 812 µs .
SAP DBTech JDBC: [257] (at 351): sql syntax error: incorrect syntax near ":=": line 15 col 19 (at pos 351) .
and when i do not use SELECT it gives error :
feature not supported:expr_agg.

On my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix

Clean the iPhone charging port with a clean dry toothbrush.

"Messaging : feature not supported " ERROR on C7

Similar Messages

Maybe you are looking for