Messaging Server 5.2
Hi again,
Is there a way to do failover for messaging server 5.2 to another ldap?
mail1 --> ldap1 (default)
when ldap1 down
mail1 --> ldap2
Both ldap1 and ldap2 are on different servers. And running MMR for o=Internet, o=pab, o=user suffixes.
Any help would greatly be appreciated. Thanks.
I posted this a while ago, but can't locate it anymore since Sun have 'tweaked' these forums, maybe it's archived !
It discusses how I set up failover for both user and config. trees in ldap. I used mult-master replic. The config. tree failover I found from reading about Netscape Directory Server V6.0 (now owned by Redhat) - See http://www.redhat.com/docs/manuals/dir-server/install/upgrade.htm#17635
There is also mentions to this PTA plugin in relevant directory docs on http://docs.sun.com. So you can have a good read.
Also point 7. in info below describes this.
Hi,
To successfully have a 'low cost' failover iDS5/iMS5 scenerio, you need to do a number of things. Or if you have a wad of cash use Vertias cluster (HA iplanet agents), etc. Directory server proxies (iDAR) :(
Currently I'm using a 'low cost' failover technique.
None of what I'm about to describe is in the SunONE doco. for iMS.
I have tested this in the Lab, all works, it's now in production. Before you do anything, test in the lab first, so you feel comfortable with the setups.
OK my scenerio.
Primary LDAP = ldap-a
Secondary LDAP = ldap-b
Mailserver = mta1
iDS5 = iDS5.1p1
iMS5 = iMS5.2p1
1. Install iDS5 on ldap-a. Acts a User dir. and Config dir. server.
2. Prep. ldap-a for iMS5 install (run ims_dssetup.pl).
- YES to schema files/indices
3. Install iMS5 on mta1, using ldap-a as User and Config dir. server.
- I have iMS5 configured in Direct LDAP mode.
4. Install iDS5 on ldap-b, use ldap-b as User and ldap-a as Config dir. server.
- No need populate the User tree on ldap-b (ie. example users from install)
- MUST USE ldap-a as config server, as you will be replicating this tree.
if not you will not be able to access the admin server, as you stated.
5. Also run ims_dssetup.pl on ldap-b.
- YES to schema files/indices
6. Setup multi-master replication between ldap-a and ldap-b.
- See Admin Guide, have a good read, needs correct setup !
- This allows read/write, thus seamless to email user for password
changing, PAB writes...if LDAP has failed over.
- Replicate all suffices
o=isp (User dir.)
o=internet (DC tree)
o=pab (PAB tree)
o=NetscapeRoot (Config. dir)
- Init consumer(ldap-b) from ldap-a for all suffices.
Note: Only problem with multi-master is uniqueness plugins, (if using) it's no problem aslong as you use ldap-a as master. See iDS Admin guide.
7. Now ldap-b requires a change to allow iMS5 to allow writes to o=NetscapeRoot in the event of failover. Otherwise the error message "ldap server unavailable, no configuration server, using locally cached values...whatever blah blah !
Managing Console Fail Over
If you have a multi-master installation with o=NetscapeRoot replicated between your two masters, ldap-a and ldap-b, you can modify the console on the second server (ldap-b) so that it uses ldap-b's instance instead of ldap-a's. (By default, writes with ldap-b's console would be made to ldap-a then replicated over.)
To accomplish this, you must:
Shut down the Administration Server and Directory Server.
Change these files to reflect ldap-b's values:
'serverRoot'/userdb/dbswitch.conf:
directory default ldap://ldap-b:389/o%3DNetscapeRoot
'serverRoot'/admin-serv/config/adm.conf:
ldapHost: ldap-b
ldapPort: 389
'serverRoot'/shared/config/dbswitch.conf:
directory default ldap://ldap-b:389/o%3DNetscapeRoot
'serverRoot'/slapd-serverID/config/dse.ldif:
nsslapd-pluginarg0: ldap://ldap-b:389/o%3DnetscapeRoot
Note: assuming your LDAP TCP port is 389
Turn off the pass through authentication (PTA) plug-in on ldap-b by editing its dse.ldif file.
In a text editor, open the 'serverRoot'/slapd-serverID/config/dse.ldif file.
Locate the entry for the the PTA plug-in: dn: cn=Pass Through Authentication,cn=plugins,cn=config
Change nsslapd-pluginEnabled: on to nsslapd-pluginEnabled: off.
Restart the Directory Server and Administration Server.
8. Now on mta1, using configutil, set options to these values
**a. local.ldaphost = "ldap-a ldap-b"
- Required to use both servers as Config dir. servers,
in the event of failover, config. is taken from ldap-b.
b. local.ugldaphost = "ldap-a ldap-b"
- Required to use both servers for User dir. lookups in event of failover.
c. local.service.pab = "ldap-a ldap-b"
- Required to use both servers for PAB lookup/additions in the event of failover.
** To make config dir. failover, shutdown Admin server. and change,
'serverroot'/shared/config/dbswith.conf:
directory default ldap://ldap-a ldap-b:389/o%3DNetscapeRoot
Restart Admin server.
OK that's all there is too it.
Now test everything, failover LDAP, test logins for email POP/Webmail, IMAP if used.
Test email connections (ie. inbound/outbound email conns)
Note:
Whatever LDAP server fails, iMS5 will continue to use other LDAP server, even when failed LDAP server comes online.
Either stop/start iDS5 on current LDAP server or stop/start iMS5, but not really necessary, depending on your environment, your call !
.....Well it worked for me !
Good luck ;)
Similar Messages
-
How do I set the mailhost attribute in Messaging Server 3.5?
<B>Intent of the hostname aliases feature: </B><BR>
In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
you want to be able to move a group of users quickly from one Messaging Server to another.
<P>
<B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
/etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
installed.)
<P>
With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
(MessageHostName), and if they match, the server considers the account to be local. <P>
For example: <BR>
MessageHostName=red.company.com,green.company.com,blue.company.com
<BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
<P>
In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
be considered local to this machine.
<P>
Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
attribute is recommended.
<P>
In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
server, i.e. host.company.com
<P>
</A>A note about DNS
Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
A 128.101.101.101
CNAME
<P>
Additional MX records are not required to use hostname aliases.
<P>
If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
Cricket Liu.You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]] -
PI 7.11: Cannot connect to server using message server:...
Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
MarkusHi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian -
Messaging Server cannot send email to gmail but can send email to yahoo
I'm using Messaging server 7.0. My company's domain is {color:#ff0000}*sun-vietnam.com*{color} and the email server name is {color:#ff0000}*mail.sun-vietnam.com*{color}, this name is {color:#ff0000}*registered and resolved*{color} correctly in the DNS server of the ISP.
When using an email account form this domain, I can send email to an email address from {color:#ff0000}*yahoo.com*{color} such as {color:#ff0000}****@yahoo.com*{color} and the {color:#ff0000}****@yahoo.com*{color} account can receives this email immediately.
But when I try to send an email address to an email address from {color:#ff0000}*gmail.com*{color} such as {color:#ff0000}****@gmail.com*{color}, the email succesfully sent without no error notified, however the {color:#ff0000}****@gmail.com*{color} account cannot receives this email although I waited for serveral days.
If anyone know the solution to fix this problem, please help me, thanks all of you very much.
Edited by: chuotbeo on Feb 15, 2009 7:26 PMHi Shane.
I'm so sorry, the administrator in my company didn't provide enough information for me.
Actually, when I sent email to ***@gmail.com, there was a notification sent to me by the system. The error notification is :
"*{color:#ff0000}Subject: Delivery Notification: Delivery has been delayed Return-path: <[email protected]> {color}*
Received: from tcp-daemon.mail.sun-vietnam.com by mail.sun-vietnam.com
(Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008))
id <[email protected]>;
Sat, 14 Feb 2009 00:30:02 +0700 (ICT)
Received: from Mali ([118.71.41.126]) by mail.sun-vietnam.com
(Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008)) with ESMTPA
id <[email protected]> for [email protected]; Wed, 11 Feb 2009 14:21:39 +0700 (ICT) "
Have you ever seen this error notification, please help me. Thank you anyway :)
Best regards, -
How to find port number of message server
Hi All,
Is anyone there who could tell me how to find out port number of message server (Message Port)? I am defining new system in my SLD so I need port number of message server of the system that I am connecting to. Thanks in advance.
Best regardsHi,
Go to the index page of the url,
type http://hostname:http port in Internet browser.
for ex : if installation is done on system with IP 172.16.28.90
and your http port is 50000(depends on Central instance number,JCxx)
then type http://172.16.28.90:50000.
1.then go to system information tab in index page.
for the credentials asked,type,
user:administrator
password:master password given during installation.
then system information page opens,in the left corner top,you can find message server port.
reward points if helpful......... -
Message Server Unreachable (after changing IP address at host)
Hi guys,
I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
This is what I got from dev_rfc.trc:
ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
This is what I got from dev_disp:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
Anyone has any idea?Yes I'm on Windows, the path that i'm refering is:
winnt/system32/drivers/etc/services
winnt/system32/drivers/etc/hosts
Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
Thanks guys -
Unable to open Messaging Server 6.2 through admin console 5.2
my system is
Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
Microsoft Windows 2000 version 5.2 (Build 3790)
i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
1- unable to open my messaging server through my admin console 5.2.
when checking the error log file i see
"[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
Any clue?
2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
Is this related to the problem in point 1?
NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
Appreciate your help, direction and tipsOh, my.....
1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided. -
Workprocesses not connecting to message server
Hi all,
the sapinstance is not comming up after restart.
the problems are
1.R3trance -d return code =0000
2.At SQL prompt> ORA-12154 error coming .
3. trace file for dispatcher.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 4072
Mon Sep 15 12:28:59 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Sep 15 12:29:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >H2SEC6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DE0040, size: 4930904)
DpShMCreate: allocated sys_adm at 05DE0040
DpShMCreate: allocated wp_adm at 05DE2090
DpShMCreate: allocated tm_adm_list at 05DE6980
DpShMCreate: allocated tm_adm at 05DE69B0
DpShMCreate: allocated wp_ca_adm at 061F94B0
DpShMCreate: allocated appc_ca_adm at 061FF270
DpShMCreate: allocated comm_adm at 062011B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06282070
DpShMCreate: allocated gw_adm at 062820B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 062820E0
DpShMCreate: allocated wall_adm at 062820E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c 467]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 8388608 K
Config. maximum size : 12582912 K
Avail. maximum size : 12582912 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
8388608 K
12582912 K
12582912 K
8372224 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 5845420 K
Commit Charge Limit : 12382576 K
Commit Charge Peak : 5845452 K
Phys.Memory Total : 54 K
Phys.Memory Available : 92263112 K
File Cache : 17376774 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 92263140 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 735836 K
Private Pages : 0 K
Total heap size : 12947 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6068 K
Allocated heap memory : 6748 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
592
sapstartsrv.exe
16188 K
16204 K
19096 K
19120 K
4
3832
msg_server.EXE
[MS] EC6_01
7752 K
7752 K
10316 K
10316 K
1
984
enserver.EXE
[**] EC6_01
13644 K
13644 K
53448 K
53448 K
3
1484
msg_server.EXE
[MS] EC6_00
8160 K
8160 K
10696 K
10696 K
2
4072
disp+work.EXE
31972 K
32032 K
67548 K
67652 K
7
1860
igswd.EXE
[**] EC6_00
2612 K
2860 K
1484 K
1756 K
0
Sum
80328 K
162588 K
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:14 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Sep 15 06:59:14 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 ENQ -1 Run no 0 0 0
8 BTC -1 Run no 0 0 0
9 BTC -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 SPO -1 Run no 0 0 0
12 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Mon Sep 15 06:59:14 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Sep 15 06:59:14 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Sep 15 06:59:14 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:19 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >H2SEC6_EC6_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4072) [dpxxdisp.c 10421]
Good Bye .....
Please help
SudhakarareddyHi,
If possible to restart the server and check it.
some times buffer not clear.
Regards,
Anil -
How do I host multiple domains on a single Messaging Server?
How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host. -
How do I set up a private enterprise messaging server?
The iPad and iPhone messaging app seems to require that the messaging server must be in the Apple cloud. Is there a way to set up a private enterprise messaging server?
Is there a way to set up a private enterprise messaging server?
Yes: http://lync.microsoft.com/en-us/Pages/unified-communications.aspx -
After Installing SAP netweaver abap 7.01 (Message server unreachable)
Hi every one ,
it was a very long night and still continues
It's my first time to install SAP netweaver abap 7.01 .. I'm using Operating System : Vista service Pack 1 .. i installed the NetWeaver Abap 7.01 and when the install shield finished he asked me to run the server ..when i clicked " ok " the install shield couldn't run the server and told me to see the log file .. and here is the log file :
<
(Dec 23, 2008 7:54:39 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:39 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:54:49 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:49 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:54:59 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:59 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:09 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:09 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:19 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:19 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:29 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:29 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file F:\SAP\NSP\log.txt for details.
(Dec 23, 2008 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Dec 23, 2008 7:55:41 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file F:\SAP\NSP\log.txt for details.
(Dec 23, 2008 7:55:41 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
>
And here is my Services file :
<
Copyright (c) 1993-2004 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name> <port number>/<protocol> [aliases...] [#<comment>]
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users #Active users
systat 11/udp users #Active users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote #Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen 19/udp ttytst source #Character generator
ftp-data 20/tcp #FTP, data
ftp 21/tcp #FTP. control
ssh 22/tcp #SSH Remote Login Protocol
telnet 23/tcp
smtp 25/tcp mail #Simple Mail Transfer Protocol
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource #Resource Location Protocol
nameserver 42/tcp name #Host Name Server
nameserver 42/udp name #Host Name Server
nicname 43/tcp whois
domain 53/tcp #Domain Name Server
domain 53/udp #Domain Name Server
bootps 67/udp dhcps #Bootstrap Protocol Server
bootpc 68/udp dhcpc #Bootstrap Protocol Client
tftp 69/udp #Trivial File Transfer
gopher 70/tcp
finger 79/tcp
http 80/tcp www www-http #World Wide Web
hosts2-ns 81/tcp #HOSTS2 Name Server
hosts2-ns 81/udp #HOSTS2 Name Server
kerberos 88/tcp krb5 kerberos-sec #Kerberos
kerberos 88/udp krb5 kerberos-sec #Kerberos
hostname 101/tcp hostnames #NIC Host Name Server
iso-tsap 102/tcp #ISO-TSAP Class 0
rtelnet 107/tcp #Remote Telnet Service
pop2 109/tcp postoffice #Post Office Protocol - Version 2
pop3 110/tcp #Post Office Protocol - Version 3
sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
auth 113/tcp ident tap #Identification Protocol
uucp-path 117/tcp
sqlserv 118/tcp #SQL Services
nntp 119/tcp usenet #Network News Transfer Protocol
ntp 123/udp #Network Time Protocol
epmap 135/tcp loc-srv #DCE endpoint resolution
epmap 135/udp loc-srv #DCE endpoint resolution
netbios-ns 137/tcp nbname #NETBIOS Name Service
netbios-ns 137/udp nbname #NETBIOS Name Service
netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
netbios-ssn 139/tcp nbsession #NETBIOS Session Service
imap 143/tcp imap4 #Internet Message Access Protocol
sql-net 150/tcp
sqlsrv 156/tcp
pcmail-srv 158/tcp #PCMail Server
snmp 161/udp #SNMP
snmptrap 162/udp snmp-trap #SNMP trap
print-srv 170/tcp #Network PostScript
bgp 179/tcp #Border Gateway Protocol
irc 194/tcp #Internet Relay Chat Protocol
ipx 213/udp #IPX over IP
rtsps 322/tcp
rtsps 322/udp
mftp 349/tcp
mftp 349/udp
ldap 389/tcp #Lightweight Directory Access Protocol
https 443/tcp MCom #HTTP over TLS/SSL
https 443/udp MCom #HTTP over TLS/SSL
microsoft-ds 445/tcp
microsoft-ds 445/udp
kpasswd 464/tcp # Kerberos (v5)
kpasswd 464/udp # Kerberos (v5)
isakmp 500/udp ike #Internet Key Exchange
crs 507/tcp #Content Replication System
crs 507/udp #Content Replication System
exec 512/tcp #Remote Process Execution
biff 512/udp comsat
login 513/tcp #Remote Login
who 513/udp whod
cmd 514/tcp shell
syslog 514/udp
printer 515/tcp spooler
talk 517/udp
ntalk 518/udp
efs 520/tcp #Extended File Name Server
router 520/udp route routed
ulp 522/tcp
ulp 522/udp
timed 525/udp timeserver
tempo 526/tcp newdate
irc-serv 529/tcp
irc-serv 529/udp
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp #For emergency broadcasts
uucp 540/tcp uucpd
klogin 543/tcp #Kerberos login
kshell 544/tcp krcmd #Kerberos remote shell
dhcpv6-client 546/tcp #DHCPv6 Client
dhcpv6-client 546/udp #DHCPv6 Client
dhcpv6-server 547/tcp #DHCPv6 Server
dhcpv6-server 547/udp #DHCPv6 Server
afpovertcp 548/tcp #AFP over TCP
afpovertcp 548/udp #AFP over TCP
new-rwho 550/udp new-who
rtsp 554/tcp #Real Time Stream Control Protocol
rtsp 554/udp #Real Time Stream Control Protocol
remotefs 556/tcp rfs rfs_server
rmonitor 560/udp rmonitord
monitor 561/udp
nntps 563/tcp snntp #NNTP over TLS/SSL
nntps 563/udp snntp #NNTP over TLS/SSL
whoami 565/tcp
whoami 565/udp
ms-shuttle 568/tcp #Microsoft shuttle
ms-shuttle 568/udp #Microsoft shuttle
ms-rome 569/tcp #Microsoft rome
ms-rome 569/udp #Microsoft rome
http-rpc-epmap 593/tcp #HTTP RPC Ep Map
http-rpc-epmap 593/udp #HTTP RPC Ep Map
hmmp-ind 612/tcp #HMMP Indication
hmmp-ind 612/udp #HMMP Indication
hmmp-op 613/tcp #HMMP Operation
hmmp-op 613/udp #HMMP Operation
ldaps 636/tcp sldap #LDAP over TLS/SSL
doom 666/tcp #Doom Id Software
doom 666/udp #Doom Id Software
msexch-routing 691/tcp #MS Exchange Routing
msexch-routing 691/udp #MS Exchange Routing
kerberos-adm 749/tcp #Kerberos administration
kerberos-adm 749/udp #Kerberos administration
kerberos-iv 750/udp #Kerberos version IV
mdbs_daemon 800/tcp
mdbs_daemon 800/udp
ftps-data 989/tcp #FTP data, over TLS/SSL
ftps 990/tcp #FTP control, over TLS/SSL
telnets 992/tcp #Telnet protocol over TLS/SSL
imaps 993/tcp #IMAP4 protocol over TLS/SSL
ircs 994/tcp #IRC protocol over TLS/SSL
pop3s 995/tcp spop3 #pop3 protocol over TLS/SSL (was spop3)
pop3s 995/udp spop3 #pop3 protocol over TLS/SSL (was spop3)
kpop 1109/tcp #Kerberos POP
nfsd-status 1110/tcp #Cluster status info
nfsd-keepalive 1110/udp #Client status info
nfa 1155/tcp #Network File Access
nfa 1155/udp #Network File Access
activesync 1034/tcp #ActiveSync Notifications
phone 1167/udp #Conference calling
opsmgr 1270/tcp #Microsoft Operations Manager
opsmgr 1270/udp #Microsoft Operations Manager
ms-sql-s 1433/tcp #Microsoft-SQL-Server
ms-sql-s 1433/udp #Microsoft-SQL-Server
ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
ms-sql-m 1434/udp #Microsoft-SQL-Monitor
ms-sna-server 1477/tcp
ms-sna-server 1477/udp
ms-sna-base 1478/tcp
ms-sna-base 1478/udp
wins 1512/tcp #Microsoft Windows Internet Name Service
wins 1512/udp #Microsoft Windows Internet Name Service
ingreslock 1524/tcp ingres
stt 1607/tcp
stt 1607/udp
l2tp 1701/udp #Layer Two Tunneling Protocol
pptconference 1711/tcp
pptconference 1711/udp
pptp 1723/tcp #Point-to-point tunnelling protocol
msiccp 1731/tcp
msiccp 1731/udp
remote-winsock 1745/tcp
remote-winsock 1745/udp
ms-streaming 1755/tcp
ms-streaming 1755/udp
msmq 1801/tcp #Microsoft Message Queue
msmq 1801/udp #Microsoft Message Queue
radius 1812/udp #RADIUS authentication protocol
radacct 1813/udp #RADIUS accounting protocol
msnp 1863/tcp
msnp 1863/udp
ssdp 1900/tcp
ssdp 1900/udp
close-combat 1944/tcp
close-combat 1944/udp
nfsd 2049/udp nfs #NFS server
knetd 2053/tcp #Kerberos de-multiplexor
mzap 2106/tcp #Multicast-Scope Zone Announcement Protocol
mzap 2106/udp #Multicast-Scope Zone Announcement Protocol
qwave 2177/tcp #QWAVE
qwave 2177/udp #QWAVE Experiment Port
directplay 2234/tcp #DirectPlay
directplay 2234/udp #DirectPlay
ms-olap3 2382/tcp #Microsoft OLAP 3
ms-olap3 2382/udp #Microsoft OLAP 3
ms-olap4 2383/tcp #Microsoft OLAP 4
ms-olap4 2383/udp #Microsoft OLAP 4
ms-olap1 2393/tcp #Microsoft OLAP 1
ms-olap1 2393/udp #Microsoft OLAP 1
ms-olap2 2394/tcp #Microsoft OLAP 2
ms-olap2 2394/udp #Microsoft OLAP 2
ms-theater 2460/tcp
ms-theater 2460/udp
wlbs 2504/tcp #Microsoft Windows Load Balancing Server
wlbs 2504/udp #Microsoft Windows Load Balancing Server
ms-v-worlds 2525/tcp #Microsoft V-Worlds
ms-v-worlds 2525/udp #Microsoft V-Worlds
sms-rcinfo 2701/tcp #SMS RCINFO
sms-rcinfo 2701/udp #SMS RCINFO
sms-xfer 2702/tcp #SMS XFER
sms-xfer 2702/udp #SMS XFER
sms-chat 2703/tcp #SMS CHAT
sms-chat 2703/udp #SMS CHAT
sms-remctrl 2704/tcp #SMS REMCTRL
sms-remctrl 2704/udp #SMS REMCTRL
msolap-ptp2 2725/tcp #MSOLAP PTP2
msolap-ptp2 2725/udp #MSOLAP PTP2
icslap 2869/tcp
icslap 2869/udp
cifs 3020/tcp
cifs 3020/udp
xbox 3074/tcp #Microsoft Xbox game port
xbox 3074/udp #Microsoft Xbox game port
ms-dotnetster 3126/tcp #Microsoft .NET ster port
ms-dotnetster 3126/udp #Microsoft .NET ster port
ms-rule-engine 3132/tcp #Microsoft Business Rule Engine Update Service
ms-rule-engine 3132/udp #Microsoft Business Rule Engine Update Service
msft-gc 3268/tcp #Microsoft Global Catalog
msft-gc 3268/udp #Microsoft Global Catalog
msft-gc-ssl 3269/tcp #Microsoft Global Catalog with LDAP/SSL
msft-gc-ssl 3269/udp #Microsoft Global Catalog with LDAP/SSL
ms-cluster-net 3343/tcp #Microsoft Cluster Net
ms-cluster-net 3343/udp #Microsoft Cluster Net
ms-wbt-server 3389/tcp #MS WBT Server
ms-wbt-server 3389/udp #MS WBT Server
ms-la 3535/tcp #Microsoft Class Server
ms-la 3535/udp #Microsoft Class Server
pnrp-port 3540/tcp #PNRP User Port
pnrp-port 3540/udp #PNRP User Port
teredo 3544/tcp #Teredo Port
teredo 3544/udp #Teredo Port
p2pgroup 3587/tcp #Peer to Peer Grouping
p2pgroup 3587/udp #Peer to Peer Grouping
upnp-discovery 3702/tcp #UPNP v2 Discovery
dvcprov-port 3776/tcp #Device Provisioning Port
dvcprov-port 3776/udp #Device Provisioning Port
msfw-control 3847/tcp #Microsoft Firewall Control
msdts1 3882/tcp #DTS Service Port
sdp-portmapper 3935/tcp #SDP Port Mapper Protocol
sdp-portmapper 3935/udp #SDP Port Mapper Protocol
net-device 4350/tcp #Net Device
net-device 4350/udp #Net Device
ipsec-msft 4500/tcp #Microsoft IPsec NAT-T
ipsec-msft 4500/udp #Microsoft IPsec NAT-T
llmnr 5355/tcp #LLMNR
llmnr 5355/udp #LLMNR
rrac 5678/tcp #Remote Replication Agent Connection
rrac 5678/udp #Remote Replication Agent Connection
dccm 5679/tcp #Direct Cable Connect Manager
dccm 5679/udp #Direct Cable Connect Manager
ms-licensing 5720/tcp #Microsoft Licensing
ms-licensing 5720/udp #Microsoft Licensing
directplay8 6073/tcp #DirectPlay8
directplay8 6073/udp #DirectPlay8
man 9535/tcp #Remote Man Server
rasadv 9753/tcp
rasadv 9753/udp
imip-channels 11320/tcp #IMIP Channels Port
imip-channels 11320/udp #IMIP Channels Port
directplaysrvr 47624/tcp #Direct Play Server
directplaysrvr 47624/udp #Direct Play Server
sql6 7210/tcp
sapdbni72 7269/tcp
Copyright (c) 1993-2004 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name> <port number>/<protocol> [aliases...] [#<comment>]
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users #Active users
systat 11/udp users #Active users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote #Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen 19/udp ttytst source #Character generator
ftp-data 20/tcp #FTP, data
ftp 21/tcp #FTP. control
ssh 22/tcp #SSH Remote Login Protocol
telnet 23/tcp
smtp 25/tcp mail #Simple Mail Transfer Protocol
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource #Resource Location Protocol
nameserver 42/tcp name #Host Name Server
nameserver 42/udp name #Host Name Server
nicname 43/tcp whois
domain 53/tcp #Domain Name Server
domain 53/udp #Domain Name Server
bootps 67/udp dhcps #Bootstrap Protocol Server
bootpc 68/udp dhcpc #Bootstrap Protocol Client
tftp 69/udp #Trivial File Transfer
gopher 70/tcp
finger 79/tcp
http 80/tcp www www-http #World Wide Web
hosts2-ns 81/tcp #HOSTS2 Name Server
hosts2-ns 81/udp #HOSTS2 Name Server
kerberos 88/tcp krb5 kerberos-sec #Kerberos
kerberos 88/udp krb5 kerberos-sec #Kerberos
hostname 101/tcp hostnames #NIC Host Name Server
iso-tsap 102/tcp #ISO-TSAP Class 0
rtelnet 107/tcp #Remote Telnet Service
pop2 109/tcp postoffice #Post Office Protocol - Version 2
pop3 110/tcp #Post Office Protocol - Version 3
sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
auth 113/tcp ident tap #Identification Protocol
uucp-path 117/tcp
sqlserv 118/tcp #SQL Services
nntp 119/tcp usenet #Network News Transfer Protocol
ntp 123/udp #Network Time Protocol
epmap 135/tcp loc-srv #DCE endpoint resolution
epmap 135/udp loc-srv #DCE endpoint resolution
netbios-ns 137/tcp nbname #NETBIOS Name Service
netbios-ns 137/udp nbname #NETBIOS Name Service
netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
netbios-ssn 139/tcp nbsession #NETBIOS Session Service
imap 143/tcp imap4 #Internet Message Access Protocol
sql-net 150/tcp
sqlsrv 156/tcp
pcmail-srv 158/tcp #PCMail Server
snmp 161/udp #SNMP
snmptrap 162/udp snmp-trap #SNMP trap
print-srv 170/tcp #Network PostScript
bgp 179/tcp #Border Gateway Protocol
irc 194/tcp #Internet Relay Chat Protocol
ipx 213/udp #IPX over IP
rtsps 322/tcp
rtsps 322/udp
mftp 349/tcp
mftp 349/udp
ldap 389/tcp #Lightweight Directory Access Protocol
https 443/tcp MCom #HTTP over TLS/SSL
https 443/udp MCom #HTTP over TLS/SSL
microsoft-ds 445/tcp
microsoft-ds 445/udp
kpasswd 464/tcp # Kerberos (v5)
kpasswd 464/udp # Kerberos (v5)
isakmp 500/udp ike #Internet Key Exchange
crs 507/tcp #Content Replication System
crs 507/udp #Content Replication System
exec 512/tcp #Remote Process Execution
biff 512/udp comsat
login 513/tcp #Remote Login
who 513/udp whod
cmd 514/tcp shell
syslog 514/udp
printer 515/tcp spooler
talk 517/udp
ntalk 518/udp
efs 520/tcp #Extended File Name Server
router 520/udp route routed
ulp 522/tcp
ulp 522/udp
timed 525/udp timeserver
tempo 526/tcp newdate
irc-serv 529/tcp
irc-serv 529/udp
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp #For emergency broadcasts
uucp 540/tcp uucpd
klogin 543/tcp #Kerberos login
kshell 544/tcp krcmd #Kerberos remote shell
dhcpv6-client 546/tcp #DHCPv6 Client
dhcpv6-client 546/udp #DHCPv6 Client
dhcpv6-server 547/tcp #DHCPv6 Server
dhcpv6-server 547/udp #DHCPv6 Server
afpovertcp 548/tcp #AFP over TCP
afpovertcp 548/udp #AFP over TCP
new-rwho 550/udp new-who
rtsp 554/tcp #Real Time Stream Control Protocol
rtsp 554/udp #Real Time Stream Control Protocol
remotefs 556/tcp rfs rfs_server
rmonitor 560/udp rmonitord
monitor 561/udp
nntps 563/tcp snntp #NNTP over TLS/SSL
nntps 563/udp snntp #NNTP over TLS/SSL
whoami 565/tcp
whoami 565/udp
ms-shuttle 568/tcp #Microsoft shuttle
ms-shuttle 568/udp #Microsoft shuttle
ms-rome 569/tcp #Microsoft rome
ms-rome 569/udp #Microsoft rome
http-rpc-epmap 593/tcp #HTTP RPC Ep Map
http-rpc-epmap 593/udp #HTTP RPC Ep Map
hmmp-ind 612/tcp #HMMP Indication
hmmp-ind 612/udp #HMMP Indication
hmmp-op 613/tcp #HMMP Operation
hmmp-op 613/udp #HMMP Operation
ldaps 636/tcp sldap #LDAP over TLS/SSL
doom 666/tcp #Doom Id Software
doom 666/udp #Doom Id Software
msexch-routing 691/tcp #MS Exchange Routing
msexch-routing 691/udp #MS Exchange Routing
kerberos-adm 749/tcp #Kerberos administration
kerberos-adm 749/udp #Kerberos administration
kerberos-iv 750/udp #Kerberos version IV
mdbs_daemon 800/tcp
mdbs_daemon 800/udp
ftps-data 989/tcp #FTP data, over TLS/SSL
ftps 990/tcp #FTP control, over TLS/SSL
telnets 992/tcp #Telnet protocol over TLS/SSL
imaps 993/tcp #IMAP4 protocol over TLS/SSL
ircs 994/tcp #IRC protocol over TLS/SSL
pop3s 995/tcp spop3 #pop3 protocol over TLS/SSL (was spop3)
pop3s 995/udp spop3 #pop3 protocol over TLS/SSL (was spop3)
kpop 1109/tcp #Kerberos POP
nfsd-status 1110/tcp #Cluster status info
nfsd-keepalive 1110/udp #Client status info
nfa 1155/tcp #Network File Access
nfa 1155/udp #Network File Access
activesync 1034/tcp #ActiveSync Notifications
phone 1167/udp #Conference calling
opsmgr 1270/tcp #Microsoft Operations Manager
opsmgr 1270/udp #Microsoft Operations Manager
ms-sql-s 1433/tcp #Microsoft-SQL-Server
ms-sql-s 1433/udp #Microsoft-SQL-Server
ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
ms-sql-m 1434/udp #Microsoft-SQL-Monitor
ms-sna-server 1477/tcp
ms-sna-server 1477/udp
ms-sna-base 1478/tcp
ms-sna-base 1478/udp
wins 1512/tcp #Microsoft Windows Internet Name Service
wins 1512/udp #Microsoft Windows Internet Name Service
ingreslock 1524/tcp ingres
stt 1607/tcp
stt 1607/udp
l2tp 1701/udp #Layer Two Tunneling Protocol
pptconference 1711/tcp
pptconference 1711/udp
pptp 1723/tcp #Point-to-point tunnelling protocol
msiccp 1731/tcp
msiccp 1731/udp
remote-winsock 1745/tcp
remote-winsock 1745/udp
ms-streaming 1755/tcp
ms-streaming 1755/udp
msmq 1801/tcp #Microsoft Message Queue
msmq 1801/udp #Microsoft Message Queue
radius 1812/udp #RADIUS authentication protocol
radacct 1813/udp #RADIUS accounting protocol
msnp 1863/tcp
msnp 1863/udp
ssdp 1900/tcp
ssdp 1900/udp
close-combat 1944/tcp
close-combat 1944/udp
nfsd 2049/udp nfs #NFS server
knetd 2053/tcp #Kerberos de-multiplexor
mzap 2106/tcp #Multicast-Scope Zone Announcement Protocol
mzap 2106/udp #Multicast-Scope Zone Announcement Protocol
qwave 2177/tcp #QWAVE
qwave 2177/udp #QWAVE Experiment Port
directplay 2234/tcp #DirectPlay
directplay 2234/udp #DirectPlay
ms-olap3 2382/tcp #Microsoft OLAP 3
ms-olap3 2382/udp #Microsoft OLAP 3
ms-olap4 2383/tcp #Microsoft OLAP 4
ms-olap4 2383/udp #Microsoft OLAP 4
ms-olap1 2393/tcp #Microsoft OLAP 1
ms-olap1 2393/udp #Microsoft OLAP 1
ms-olap2 2394/tcp #Microsoft OLAP 2
ms-olap2 2394/udp #Microsoft OLAP 2
ms-theater 2460/tcp
ms-theater 2460/udp
wlbs 2504/tcp #Microsoft Windows Load Balancing Server
wlbs 2504/udp #Microsoft Windows Load Balancing Server
ms-v-worlds 2525/tcp #Microsoft V-Worlds
ms-v-worlds 2525/udp #Microsoft V-Worlds
sms-rcinfo 2701/tcp #SMS RCINFO
sms-rcinfo 2701/udp #SMS RCINFO
sms-xfer 2702/tcp #SMS XFER
sms-xfer 2702/udp #SMS XFER
sms-chat 2703/tcp #SMS CHAT
sms-chat 2703/udp #SMS CHAT
sms-remctrl 2704/tcp #SMS REMCTRL
sms-remctrl 2704/udp #SMS REMCTRL
msolap-ptp2 2725/tcp #MSOLAP PTP2
msolap-ptp2 2725/udp #MSOLAP PTP2
icslap 2869/tcp
icslap 2869/udp
cifs 3020/tcp
cifs 3020/udp
xbox 3074/tcp #Microsoft Xbox game port
xbox 3074/udp #Microsoft Xbox game port
ms-dotnetster 3126/tcp #Microsoft .NET ster port
ms-dotnetster 3126/udp #Microsoft .NET ster port
ms-rule-engine 3132/tcp #Microsoft Business Rule Engine Update Service
ms-rule-engine 3132/udp #Microsoft Business Rule Engine Update Service
msft-gc 3268/tcp #Microsoft Global Catalog
msft-gc 3268/udp #Microsoft Global Catalog
msft-gc-ssl 3269/tcp #Microsoft Global Catalog with LDAP/SSL
msft-gc-ssl 3269/udp #Microsoft Global Catalog with LDAP/SSL
ms-cluster-net 3343/tcp #Microsoft Cluster Net
ms-cluster-net 3343/udp #Microsoft Cluster Net
ms-wbt-server 3389/tcp #MS WBT Server
ms-wbt-server 3389/udp #MS WBT Server
ms-la 3535/tcp #Microsoft Class Server
ms-la 3535/udp #Microsoft Class Server
pnrp-port 3540/tcp #PNRP User Port
pnrp-port 3540/udp #PNRP User Port
teredo 3544/tcp #Teredo Port
teredo 3544/udp #Teredo Port
p2pgroup 3587/tcp #Peer to Peer Grouping
p2pgroup 3587/udp #Peer to Peer Grouping
upnp-discovery 3702/tcp #UPNP v2 Discovery
dvcprov-port 3776/tcp #Device Provisioning Port
dvcprov-port 3776/udp #Device Provisioning Port
msfw-control 3847/tcp #Microsoft Firewall Control
msdts1 3882/tcp #DTS Service Port
sdp-portmapper 3935/tcp #SDP Port Mapper Protocol
sdp-portmapper 3935/udp #SDP Port Mapper Protocol
net-device 4350/tcp #Net Device
net-device 4350/udp #Net Device
ipsec-msft 4500/tcp #Microsoft IPsec NAT-T
ipsec-msft 4500/udp #Microsoft IPsec NAT-T
llmnr 5355/tcp #LLMNR
llmnr 5355/udp #LLMNR
rrac 5678/tcp #Remote Replication Agent Connection
rrac 5678/udp #Remote Replication Agent Connection
dccm 5679/tcp #Direct Cable Connect Manager
dccm 5679/udp #Direct Cable Connect Manager
ms-licensing 5720/tcp #Microsoft Licensing
ms-licensing 5720/udp #Microsoft Licensing
directplay8 6073/tcp #DirectPlay8
directplay8 6073/udp #DirectPlay8
man 9535/tcp #Remote Man Server
rasadv 9753/tcp
rasadv 9753/udp
imip-channels 11320/tcp #IMIP Channels Port
imip-channels 11320/udp #IMIP Channels Port
directplaysrvr 47624/tcp #Direct Play Server
directplaysrvr 47624/udp #Direct Play Server
sql6 7210/tcp
sapdbni72 7269/tcp
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
sapdp13 3213/tcp
sapdp14 3214/tcp
sapdp15 3215/tcp
sapdp16 3216/tcp
sapdp17 3217/tcp
sapdp18 3218/tcp
sapdp19 3219/tcp
sapdp20 3220/tcp
sapdp21 3221/tcp
sapdp22 3222/tcp
sapdp23 3223/tcp
sapdp24 3224/tcp
sapdp25 3225/tcp
sapdp26 3226/tcp
sapdp27 3227/tcp
sapdp28 3228/tcp
sapdp29 3229/tcp
sapdp30 3230/tcp
sapdp31 3231/tcp
sapdp32 3232/tcp
sapdp33 3233/tcp
sapdp34 3234/tcp
sapdp35 3235/tcp
sapdp36 3236/tcp
sapdp37 3237/tcp
sapdp38 3238/tcp
sapdp39 3239/tcp
sapdp40 3240/tcp
sapdp41 3241/tcp
sapdp42 3242/tcp
sapdp43 3243/tcp
sapdp44 3244/tcp
sapdp45 3245/tcp
sapdp46 3246/tcp
sapdp47 3247/tcp
sapdp48 3248/tcp
sapdp49 3249/tcp
sapdp50 3250/tcp
sapdp51 3251/tcp
sapdp52 3252/tcp
sapdp53 3253/tcp
sapdp54 3254/tcp
sapdp55 3255/tcp
sapdp56 3256/tcp
sapdp57 3257/tcp
sapdp58 3258/tcp
sapdp59 3259/tcp
sapdp60 3260/tcp
sapdp61 3261/tcp
sapdp62 3262/tcp
sapdp63 3263/tcp
sapdp64 3264/tcp
sapdp65 3265/tcp
sapdp66 3266/tcp
sapdp67 3267/tcp
sapdp68 3268/tcp
sapdp69 3269/tcp
sapdp70 3270/tcp
sapdp71 3271/tcp
sapdp72 3272/tcp
sapdp73 3273/tcp
sapdp74 3274/tcp
sapdp75 3275/tcp
sapdp76 3276/tcp
sapdp77 3277/tcp
sapdp78 3278/tcp
sapdp79 3279/tcp
sapdp80 3280/tcp
sapdp81 3281/tcp
sapdp82 3282/tcp
sapdp83 3283/tcp
sapdp84 3284/tcp
sapdp85 3285/tcp
sapdp86 3286/tcp
sapdp87 3287/tcp
sapdp88 3288/tcp
sapdp89 3289/tcp
sapdp90 3290/tcp
sapdp91 3291/tcp
sapdp92 3292/tcp
sapdp93 3293/tcp
sapdp94 3294/tcp
sapdp95 3295/tcp
sapdp96 3296/tcp
sapdp97 3297/tcp
sapdp98 3298/tcp
sapdp99 3299/tcp
sapgw00 3300/tcp
sapgw01 3301/tcp
sapgw02 3302/tcp
sapgw03 3303/tcp
sapgw04 3304/tcp
sapgw05 3305/tcp
sapgw06 3306/tcp
sapgw07 3307/tcp
sapgw08 3308/tcp
sapgw09 3309/tcp
sapgw10 3310/tcp
sapgw11 3311/tcp
sapgw12 3312/tcp
sapgw13 3313/tcp
sapgw14 3314/tcp
sapgw15 3315/tcp
sapgw16 3316/tcp
sapgw17 3317/tcp
sapgw18 3318/tcp
sapgw19 3319/tcp
sapgw20 3320/tcp
sapgw21 3321/tcp
sapgw22 3322/tcp
sapgw23 3323/tcp
sapgw24 3324/tcp
sapgw25 3325/tcp
sapgw26 3326/tcp
sapgw27 3327/tcp
sapgw28 3328/tcp
sapgw29 3329/tcp
sapgw30 3330/tcp
sapgw31 3331/tcp
sapgw32 3332/tcp
sapgw33 3333/tcp
sapgw34 3334/tcp
sapgw35 3335/tcp
sapgw36 3336/tcp
sapgw37 3337/tcp
sapgw38 3338/tcp
sapgw39 3339/tcp
sapgw40 3340/tcp
sapgw41 3341/tcp
sapgw42 3342/tcp
sapgw43 3343/tcp
sapgw44 3344/tcp
sapgw45 3345/tcp
sapgw46 3346/tcp
sapgw47 3347/tcp
sapgw48 3348/tcp
sapgw49 3349/tcp
sapgw50 3350/tcp
sapgw51 3351/tcp
sapgw52 3352/tcp
sapgw53 3353/tcp
sapgw54 3354/tcp
sapgw55 3355/tcp
sapgw56 3356/tcp
sapgw57 3357/tcp
sapgw58 3358/tcp
sapgw59 3359/tcp
sapgw60 3360/tcp
sapgw61 3361/tcp
sapgw62 3362/tcp
sapgw63 3363/tcp
sapgw64 3364/tcp
sapgw65 3365/tcp
sapgw66 3366/tcp
sapgw67 3367/tcp
sapgw68 3368/tcp
sapgw69 3369/tcp
sapgw70 3370/tcp
sapgw71 3371/tcp
sapgw72 3372/tcp
sapgw73 3373/tcp
sapgw74 3374/tcp
sapgw75 3375/tcp
sapgw76 3376/tcp
sapgw77 3377/tcp
sapgw78 3378/tcp
sapgw79 3379/tcp
sapgw80 3380/tcp
sapgw81 3381/tcp
sapgw82 3382/tcpHi,
I had the same problem, but i didn't get any answer in that forum.
I deinstalled the SAP Software (regard the end of the threat
https://forums.sdn.sap.com/click.jspa?searchID=22036513&messageID=6625975) and then I installed the software again. Then the system ran and i didn't have any more problems with the message server.
I didn't installed the MS Loopback Adapter, because i am connected to a network.
Best regards,
Günther Klee -
Can not start messaging server resource group in cluster 3.2
Hi all,
Please help in the following issue.
I am not able to start resource group (msg-rg) and following is the error:
ms1@root# clrg online -M -e msg-rg
clrg: (C748634) Resource group msg-rg failed to start on chosen node and might fail over to other node(s)
clrg: (C135343) No primary node could be found for resource group msg-rg; it remains offline
scstat output (remove some for brief description)
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: SJMS ms1 ms2
-- Device Group Status --
Device Group Status
Device group status: SJMS Online
-- Resource Groups and Resources --
Group Name Resources
Resources: msg-rg mail msg-hasp-rs msg-rs
-- Resources --
Resource Name Node Name State Status Message
Resource: mail ms1 Offline Offline - LogicalHostname offline.
Resource: mail ms2 Offline Offline - LogicalHostname offline.
Resource: msg-hasp-rs ms1 Offline Offline
Resource: msg-hasp-rs ms2 Offline Offline
Resource: msg-rs ms1 Offline Offline - Stop Succeeded
Resource: msg-rs ms2 Offline Offline - Stop Succeeded
Following is the from /var/adm/messages (remove some for brief description)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <ims_svc_start> for resource <msg-rs>, resou
rce group <msg-rg>, node <ms1>, timeout <300> seconds
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_UNKNOWN
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource msg-rs status msg on node ms1 change to <Starting>
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/r
gm/rt/hafoip/hafoip_monitor_start>:tag=<msg-rg.mail.7>: Calling security_clnt_connect(..., host=<ms1>, sec_type {0:WEAK, 1:ST
RONG, 2:DES} =<1>, ...)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/sun/comms/msg
scha/bin/imssvc_start>:tag=<msg-rg.msg-rs.0>: Calling security_clnt_connect(..., host=<ms1>, sec_type {0:WEAK, 1:STRONG, 2:
DES} =<1>, ...)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for reso
urce <mail>, resource group <msg-rg>, node <ms1>, time used: 0% of timeout <300 seconds>
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource mail state on node ms1 change to R_ONLINE
Sep 26 12:26:53 ms1 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="msg-rg,msg-rs,1.svc", cmd="/bin/sh -c /opt/sun/
comms/messaging64/bin/start-msg watcher", Failed to stay up.
Sep 26 12:26:55 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_ONLINE
Sep 26 12:26:55 ms1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource msg-rs status msg on node ms1 change to <Start succe
eded.>
Sep 26 12:26:55 ms1 Cluster.PMF.pmfd: [ID 819736 daemon.notice] PMF is restarting process that died: tag=msg-rg,msg-rs,1.svc,
cmd_path=/bin/sh -c /opt/sun/comms/messaging64/bin/start-msg watcher, max_retries=0, num_retries=0
Sep 26 12:27:25 ms1 SC[SUNW.ims:7.0,msg-rg,msg-rs,ims_svc_start]: [ID 141062 daemon.error] Failed to connect to host 192.168.
0.250 and port 27442: Connection refused.
Sep 26 12:29:55 ms1 last message repeated 6 times
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 764140 daemon.error] Method <ims_svc_start> on resource <msg-rs>, resource group <m
sg-rg>, node <ms1>: Timeout.
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource msg-rs state on node ms1 change to R_START_FAILED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group msg-rg state on node ms1 change to RG_PENDING_
OFF_START_FAILED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_FAULTED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource msg-rs state on node ms1 change to R_STOPPING
SI got the mistake in adding /etc/hosts. I pasted the area here for any person who can notice if they encountered same problem or same mistake.
it should be following format:
192.168.0.250 mail.test.com mail msg-lcreate logical hostname as follow:
clrslh create -g msg-rg msg-lNotice qfe0:1
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.240 netmask ffffff00 broadcast 192.168.0.255
groupname sc_ipmp0
ether 0:3:ba:29:8a:ac
eri0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 >index 2
inet 192.168.0.242 netmask ffffff00 broadcast 192.168.0.255
qfe0: flags=9040842<BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 3
inet 192.168.0.243 netmask ffffff00 broadcast 192.168.0.255
groupname sc_ipmp0
ether 0:3:ba:22:d4:36
qfe0:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 3
inet 192.168.0.250 netmask ffffff00 broadcast 192.168.0.255
qfe2: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 5
inet 172.16.0.129 netmask ffffff80 broadcast 172.16.0.255
ether 0:3:ba:22:d4:38
qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 4
inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
ether 0:3:ba:22:d4:39
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 >index 6
inet 172.16.4.1 netmask fffffe00 broadcast 172.16.5.255
ether 0:0:0:0:0:1Now I am able to plumb logical hostname ip. messaging resource group is able to swing over between nodes and resource group is able to go online (before creating messaging server resource (msg-rs).
after creating messaging server resource, use following command to start message resource group:
ms1@root #clrg online -eM msg-rgI used the following command to create message resource (msg-rs)
clrs create -g msg-rg -t SUNW.ims -x IMS_serverroot=/opt/sun/comms/messaging64 -y >Resource_dependencies=msg-l,msg-hasp-rs msg-rsBut still having problem in starting resource group after adding msg-rs
Please advise where I went wrong..
Thanks. -
Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1
Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks. -
[Help!] Log file size Messaging Server 2005Q4
Hi,
I have a large environment where I need to keep detailed IMAP log.
I tried with logfile.imap.maxlogfilesize = 4294967296but I notice that imap file size is limited to 2MB:
ls -l
-rw------- 1 mail mail 763225 Feb 20 09:16 imap
-rw------- 1 mail mail 2097263 Feb 20 08:56 imap.7307.1203494098
-rw------- 1 mail mail 2097374 Feb 20 08:59 imap.7308.1203494213
-rw------- 1 mail mail 2097212 Feb 20 09:01 imap.7309.1203494341
-rw------- 1 mail mail 2097248 Feb 20 09:03 imap.7310.1203494468
-rw------- 1 mail mail 2097235 Feb 20 09:05 imap.7311.1203494608
-rw------- 1 mail mail 2097273 Feb 20 09:08 imap.7312.1203494727Is this an implicit limit not configurable?
My system is:
logfile.imap.buffersize = 0
logfile.imap.expirytime = 604800
logfile.imap.flushinterval = 60
logfile.imap.loglevel = Debug
logfile.imap.logtype = NscpLog
logfile.imap.maxlogfiles = 10
logfile.imap.maxlogfilesize = 4294967296
logfile.imap.maxlogsize = 42949672960
logfile.imap.minfreediskspace = 524288000
logfile.imap.objectclass = top
logfile.imap.rollovertime = 86400
logfiles.imap.alias = |logfile|imap
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS srvmsg01 5.9 Generic_117171-07 sun4u sparc SUNW,Sun-Fire-V440
I thank you very much for every hints you could let me know.
Best Regards
marcoziopino wrote:
I have a large environment where I need to keep detailed IMAP log.
I tried with logfile.imap.maxlogfilesize = 4294967296
The maximum value of maxlogfilesize is 2GB (a common filesystem limit).
There is a whole write-up on logging and how to configure your system to keep a large amount of logs here:
http://blogs.sun.com/factotum/entry/messaging_server_more_on_managing
Regards,
Shane. -
Integrating calendar server with messaging server
hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha -
Hello gurus,
System: Solution Manager
OS: Windows 2003 server R2 X32
DB: Microsoft SQL server 2005
I have an error when I tried to start my solution manager system, after having done a kernel upgrade (for the level 201)
I donu00B4t know why but the error (as you see in following image) itu00B4s in the java stack more particularly in disp+work.EXE Dispatcher with the status "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
http://img6.imageshack.us/img6/7067/solmanj2eeerror.png
Can you help me whatu00B4s the problem here?
This next text itu00B4s a dev_disp log... maybe with this you get the error and the solution for that! :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PSM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 201
intno 20050900
make: multithreaded, ASCII, optimized
pid 756
Sun Jul 05 21:08:44 2009
kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
length of sys_adm_ext is 364 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 756) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 05 21:08:49 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5518]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >salzburgo_PSM_01 <
DpShMCreate: sizeof(wp_adm) 16464 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 055C0040, size: 4419544)
DpShMCreate: allocated sys_adm at 055C0040
DpShMCreate: allocated wp_adm at 055C1BF8
DpShMCreate: allocated tm_adm_list at 055C5C48
DpShMCreate: allocated tm_adm at 055C5C78
DpShMCreate: allocated wp_ca_adm at 059624F8
DpShMCreate: allocated appc_ca_adm at 05966B78
DpShMCreate: allocated comm_adm at 059682E8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 059E9198
DpShMCreate: allocated gw_adm at 059E91D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 059E9208
DpShMCreate: allocated wall_adm at 059E9210
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 5700
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( salzburgo) [dpxxdisp.c 12527]
DpStartStopMsg: send start message (myname is >salzburgo_PSM_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Jul 05 21:08:55 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Sun Jul 05 21:08:57 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2040) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:09:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:09:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2168
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:09:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1440
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2126) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:10:29 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5484
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:10:32 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1532
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2133) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:49 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:09 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3348
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:12 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1436
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2144) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:11:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1868
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2152) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:12:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:12:29 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Best regards,
Jou00E3o Dimas - Portugal
Edited by: Jou00E3o Dimas on Jul 5, 2009 11:39 PMHi uday kumar,
First thank you to tried to help me!
--> So... I have a problem... in that checked that you asked, I donu00B4t have acess to all clients in system... Iu00B4m only able to login to client 000 and 100 and in that clients that two users SAPJSF and J2ee_admin donu00B4t exist!! But maybe in 001... I donu00B4t know!! Itu00B4s any other way to know that? I think through configtool in j2ee directory... but I donu00B4t get that, maybe because I donu00B4t have the JAVA part active!!
--> And other thing, you recommed me to "Check the profile parameters once, try change the JVM setting and check were you able to start the server"... What you want to say with JVM setting.. sorry Iu00B4m still newest in sap world... can you explain me better what you wanted to say..?! Thanks.
--> Other think and the last... I checked the sapstartsrv.log in D:\usr\sap\PSM\SCS00\work directory path and in that it said this:
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Mon Mar 09 11:13:46 2009
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
Can you help me?!... thanks a lot!
Best regards,
Jou00E3o Dimas - Portugal
Maybe you are looking for
-
Ipod touch wont turn on and itunes wont detect.HELP!!!!
Can anyone please help me after updated my ipod touch 8gb 1st or 2nd gen cant remember. when i plug it into my laptop, itunes pops up as normal and it says waiting for ipod then the ipod turns on no logo just a blank black screen but its on, after ab
-
7911 can't get IP from CME 4.0 on 2651XM
Hello, i have two 7911G ip phone, both of them can't resolve ip from DHCP service on 2651XM Router have CME 4.0 the phone stuck in "configuring ip" state the strange thing ! the same phones can easy get ip and register on Dynamips "Router Emulation p
-
Is it Possible to "Interrupt" an Interactive Report Refresh
We have a particular Interactive Report for which we want to enforce two column filters as mandatory. We've already figured out how to examine the current filters and determine if they are set. What we need now is some mechanism by which if the user
-
I'm only booting to the gray screen...help!
There's something going on, when I turn my computer on, it only boots the the gray apple screen with a progress wheel, no further. I cannot get it to boot in safe mode, and my problem is worse because my optical drive hasn't worked in a long time (I'
-
hi experts how can i open new report using go url in pop-up window using javascirpt.. thanks for your help in advance. Any help on this please!!!!!!!!! regards Edited by: ObieeUser on 17-May-2010 06:17