Messaging Server and Mailing Lists

Hello,
is Messaging Server capable for use as a mailing list server like mailman to which one can send subscribe, unsubscribe and help messages? If yes, can one point me to the right documentation about that?
Thank you very much.
Greetings,
Willi

Hello Ajith,
Look at this and try downloading "mailmanwrapper.pl "
http://ims.balius.com/downloads/
I looked at the script but I do not understand the mapping to the LDAP database backend of the Messaging Server. In the script it is said "The ldap entries for the above aliases are below the script" but there are no such entries. In another wrapper script from Stephen Balukoff I found the following example LDAP entries:
dn: uid=list,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list@${mail_domain}
mailHost: ${mail_host}
uid: list
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-post
dn: uid=list-request,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list-request@${mail_domain}
mailHost: ${mail_host}
uid: list-request
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-mailcmd
dn: uid=list-admin,ou=Mailman,ou=People,o=${mail_domain},o=isp
objectClass: mailRecipient
objectClass: top
objectClass: inetMailUser
objectClass: inetLocalMailRecipient
mailUserStatus: active
mail: list-admin@${mail_domain}
mailHost: ${mail_host}
uid: list-admin
mailDeliveryOption: program
mailProgramDeliveryInfo: mailman-mailowner
mailAlternateAddress: list-owner@${mail_domain}
Are this entries correct for the list aliases in mailmanwrapper.pl?
Thank you.
Greetings,
Willi

Similar Messages

Configure messaging server and MTA on different machine

Is there anyways to install / configure messaging server and MTA on different machine? I am using Sun One Messaging server 6.0
Thanks
Haris

Thanks for the reply, How MTA can be disabled on the
messaging server? how can i disable the store on the
MTA machine, Is there any documentation for it?Yes, the documentation helps you. You cannot totally disable the MTA. If you did, how would you get mail to the store?
Also
is it possible to use some another machine for
webmail?Well, um, kind of. The webmail interface provided with Messaging Server interacts directly with the store, so you can't truly run that remotely, but .. .
You can install the server on a remote box, and turn on "Messaging Express Multiplexor", a proxy for webmail. Users can then connect to the MEM box, and be forwarded to the store for their mails.
It should be possible to use a third-party webmail product that uses something like IMAP to talk to the store, too. that would be unsupported, but possible. Most users find MEM to be very good.
What problem are you trying to solve? Perhaps I can better help you if I know why you're asking these questions, and offer a better solution to you.
>
Thanks
Haris

Enable server group mailing list

I am try to figure out why I cannot get the server group mailing list to work. I have a group called testgroup in my OD and have 4 users added to it. I restarted the server after I ticked the box "enable server group mailing list" in Mail/settings/Mailing list and when I send an email to testgroup the mail client rejects the address. What am I doing wrong? All I want to do is create a group email account.
Any help greatly appreciated.

HI John,
The group settings in WGM SL and Leopard are different.
Yes, they are. I booted to my eval copy of SL Server and ran through the settings in WGM, Server Admin and Server Preferences; as you pointed out, all the mail list admin tools I could find are in the Mail service in Server Admin.
The only thing that may be of interest that I could find is that for the group mail list, the email address for the group is group_shortname@ServerDNSname, not groupshortname@yourdomain (this is in the Mail Services Admin Guide for 10.6). This might explain why your email to the group may have been rejected?
-Doug

Unbale to start Message Server and Dispatcher

Hi
When i am trying to start j2ee engine, message server and dispatcher are not starting.I have checked in developer trace of message server i got the following error.....

[Thr 5076] Fri Nov 16 17:37:39 2007
[Thr 5076] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9163]
[Thr 5076] *** ERROR => MsSClientHandle: MsSRead C1 (sapep_QN7_00), MSEINTERN [msxxserv.c 3778]
[Thr 5076] MsSExit: received SIGINT (2)
[Thr 5076] ***LOG Q02=> MsSHalt, MSStop (Msg Server 5100) [msxxserv.c 5334]
and i checkd in default trace i got the following error
1.5#00111120E5260012000000020000147000043BBD4424E5AA#1191583984968#com.sap.engine.services.httpserver.dispatcher##com.sap.engine.services.httpserver.dispatcher#######OrderedChannel for p4 service##0#0#Error##Plain###Failure in session communication between current dispatcher and server with ID 9661150. Sending notification message for disconnected client failed.
com.sap.engine.frame.cluster.message.DestinationNotAvailableException: Participant 9,661,150 is not available.
 at com.sap.engine.core.cluster.impl6.session.SessionConnectorImpl.send(SessionConnectorImpl.java:181)
 at com.sap.engine.core.cluster.impl6.ClusterManagerImpl.ss_send(ClusterManagerImpl.java:2502)
 at
Thanks & Regards
Sowmya

Hi
When i am trying to start j2ee engine, message server and dispatcher are not starting.I have checked in developer trace of message server i got the following error.....

[Thr 5076] Fri Nov 16 17:37:39 2007
[Thr 5076] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9163]
[Thr 5076] *** ERROR => MsSClientHandle: MsSRead C1 (sapep_QN7_00), MSEINTERN [msxxserv.c 3778]
[Thr 5076] MsSExit: received SIGINT (2)
[Thr 5076] ***LOG Q02=> MsSHalt, MSStop (Msg Server 5100) [msxxserv.c 5334]
and i checkd in default trace i got the following error
1.5#00111120E5260012000000020000147000043BBD4424E5AA#1191583984968#com.sap.engine.services.httpserver.dispatcher##com.sap.engine.services.httpserver.dispatcher#######OrderedChannel for p4 service##0#0#Error##Plain###Failure in session communication between current dispatcher and server with ID 9661150. Sending notification message for disconnected client failed.
com.sap.engine.frame.cluster.message.DestinationNotAvailableException: Participant 9,661,150 is not available.
 at com.sap.engine.core.cluster.impl6.session.SessionConnectorImpl.send(SessionConnectorImpl.java:181)
 at com.sap.engine.core.cluster.impl6.ClusterManagerImpl.ss_send(ClusterManagerImpl.java:2502)
 at
Thanks & Regards
Sowmya

Technologies websites and mailing lists...

Hi all,
Please advise me about websites and mailing lists where i can found free discissions about technologies hardware like security cameras, internet wireless hardwares, others......
for axample, i need a finger camera, i want to see, know, and discuss all its features before buying it ...
thanks...

The Bluetooth Discussion forum on the Apple web-site
probably isn't the best starting point for info on
security cameras or 'finger' cameras etc.
Yes i know ... but may be the experts on this site help me to find such important sites... thanks...
Have you tried
Google? It's always
a good place to start if you want to find something
specific.
Ok, but google is a GENERAL site to find general things ...
i like to find very proffessionnal sites and i think the experts on this site know many ...
Sorry and many thanks....

Integrating Messaging Server and Identity Server

I've got JES 2004Q2, and I'm trying to install the various components on different workstations to prove that a) the software works, and b) it's a viable alternative to Exchange (so please please help me get it working!)
The problem I have is getting Messenger Server and Directory Server talking properly so that I can create users and then log in as those users. After days of frustrating searching for solutions to this problem (and also find people who have successfully done this), I decided to install the components onto one server.
And it worked. Installing Messaging Server, Identity Server, Web Server (contained for Identity Server), Directory Server, and Admin Server all on the same box, configuring them all to use the same directory server for UG and preferences, running the various configuration tools that come with the software, and it all works together fine. Using "./commadmin domain modify .... -S mail", I get "OK". I can add users with the "-S mail" option, log in as those users, and send emails between those users. So this tells me that the software does work, albeit on one box.
When I try to separate the services out to separate boxes, they don't seem to integrate properly. I thought that maybe the order in which you configured applications made a difference (ie. configuring Identity Server after Messenger Server means IS will pick up on the changes made to the directory by MS, and enable it). I also tried to see if using the same options directory server from different boxes helped, but nothing. I've even tried patching them using 116568-52 and 116585-10 but no luck.
Therefore, I've found that installing all servers on one box works, but installing them on separate boxes doesn't (despite using the same directory servers). My conclusion in this is that one of two things must be the case:
a) there's something in the install that has to be changed to reflect the fact that the services are running on different boxes
b) the install of the services adds files to the system somewhere which other packages in JES pick up on (hence the reason why installing everything on one box works), and this isn't documented anywhere
Unfortunately, the output of commadmin when it fails isn't that helpful (nothing against the developers, however it doesn't really help in the fault finding process). I do believe however that the problem is with Identity Server and its configuration, rather than Messaging Server.
Here's some (possibly) useful info:
kipling# ./imsimta version
Sun Java(tm) System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004)
libimta.so 6.1 HotFix 0.01 (built 12:52:04, Jun 24 2004)
SunOS kipling 5.8 Generic_117350-02 sun4u sparc SUNW,Sun-Blade-1500
kipling#
(on UG server)
# ./commadmin domain modify -D admin -w <password> -d uwe.ac.uk -n uwe.ac.uk -S mail -H kipling.uwe.ac.uk
FAIL
Unable to set attribute(s)
(some verbose mode output)
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/TaskManager
[Debug]: To servlet: task=ModifyDomain&objecttype=Domain&domain=uwe.ac.uk&add_services=mail&add_preferredmailhost=kipling.uwe.ac.uk
[Debug]: RECV: FAIL
[Debug]: RECV: Unable to set attribute(s)
[Debug]: CLITask: status returned =FAIL
FAIL
Unable to set attribute(s)
[Debug]: DBG: doOne returned code=6
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/logout
[Debug]: Logout ...
[Debug]: RECV: SSOToken id AQIC5wM2LY4SfcyW5hbVBGXqCdsYYDjVarSFRMd6HIxsGho=@AAJTSQACMDE=#
[Debug]: RECV: destroyed
Root suffix: dc=uwe,dc=ac,dc=uk (all "o=" references have been dropped)
All services have their own local options directory server.
Can anyone give me any suggestions? If I log a support call with Sun, what is the likely resolution time? My ultimate goal is to get the whole suite running together, then install Portal server. Once that's working, download the connectors for Outlook and get it all working with Outlook. As I said at the start, we're hoping to show this is a viable alternative to Exchange (certainly for the backend) so any help will be greatly appreciated!
Iain

slo_chewie wrote:
Does the email recipient address change when the email is sent to gmail i.e. does an email sent to [email protected] become [email protected]?
We've got google for domains setup, so users would retain a @domain.com address regardless if there mailbox was hosted on the internal server or hosted at google.You can make use of the mailRoutingAddress: user attribute and source routing to get the desired behaviour e.g.
=> Set the following value to the LDAP entry of the user who is hosted on the gmail server. The "[email protected]" address should match the users mail: address:
mailRoutingAddress: @gmail.com:[email protected]=> Ensure the following option has been tcp_local channel in your imta.cnf file. This option strips off the "@gmail.com" value of the recipient address before sending the email to the gmail.com servers.
dequeue_removerouteMake sure you run "./imsimta cnbuild;./imsimta restart" after modifying the imta.cnf file.
Regards,
Shane.

DBmail imap server and Mail

Since the last upgrade I have been having a lot of crashes. I moved a number of old mail to the server at about the same time. Hence I thought it was something I did.
I have heard from an ISP that there is rumor or maybe more than a rumor about a problem with DBmail and Mail.
Anyone having problems?
I was getting a crash almost within a minute of starting mail if the imap account was online. I reduce the frequency by moving around a lot of messages and by quickly taking the account offline when ever I have finished pulling down new mail. Even then I get multiple crashes a day when the account is online.
Suggestions?
PB 17" Mac OS X (10.4.5) Very large number of mail messages and folders

Update: Take a look at "Mail crash isolated - DBMail imap interaction"
The problem is now isolated. The bug was reported to the DBMail folks. Hopefully Apple will pick up on the problem in Mail and patch the code for a future release.

Messaging Server and maildir

Hi there,
Can anyone tell me whether messaging server 6 supports maildir as a method of storing mail? If not, what formats does it support.
I want to use the software to take advantage of the calendar with outlook connector but I am going to use an Exim frontend for mail delivery and SMTP (the JES SMTP server doesn't allow me to do all the things that I need to do).
Thanks
Josh

OK.
So now I've migrated the emails and I'm giving a
reply. Maybe there's someone who may find it
helpful...
First: I've been thinking of migrating mailboxes as
files, because I've got some very old emails, which
I've tried to move from one IMAP account to another,
and caused IMAP server to bounce with "Invalid
headers" error, unwilling to continue. I was not able
to find the reason, in the logs nor in the messages.
After several hours, I've noticed that some (the
buggy) emails begin with "From xxx" or ">From xxx"
pseudo-headers, probably inserted years ago by MUA or
procmail, I don't know. But this was the problem and
after removing such crap, I was able to import my old
e-mails using IMAP and drag and drop in the client.
So there was no need to develop my command line
solution anymore.Much better . . .
The format is pretty strictly RFC822 file format. That includes the cr/lf at the end of each line.
Since the mailstore was never intended to be used as you've done, we're pretty strict about the format of the messages.
>
But until I've got to this point, I've made several
trials and errors attempting to understand the
mailbox structure of SUNWmsgr. So, it seems that:
0. Each user's folder is a directorytrue
1. Each message is a text file named 01.msg ..
99.msg.or higher. ..
2. Each message is contained in "hash" directory. 00
for first 100 emails (01.msg - 100.msg), 01 for
second 100 emails (101.msg-200.msg) etc.Yes. after you get to the 99 directory, we roll back to 00 with the next message.
3. Each message seem to (needs to) be saved in
DOS-end of line encoding (CR LF). Any attempt to put
a bare LF (unix end of line encoding) here will cause
that the headers will not be gathered/displayed
properly in the mail client. I've only checked with
Mozilla Thunderbird though.Actually, it's NOT DOS format, but RFC822 format.
Yes, it includes cr/lf
4. I needed not only reconstruct the index, but to
delete store.* files in the folder and reconstruct
the index of the folder."reconstruct the index" reconstruct -r. You shouldn't have needed to remove the store.idx files. For a freshly created mailbox/folder, that's the only store.* file that I would expect to see there.
>
After I've realized that my emails have invalid
headers and fixed (or deleted) them, importing from
old IMAP account to new IMAP account (on SUNWmsgr)
was pretty sufficient for me.Yeah, basically what MoveUser does.
>
Regards,
Ivan

Messaging server and external LDAP user store

Is it possible to have an external LDAP application store all user information and then have the messaging server authenticate against it and create a mail profile in it's own LDAP instance, similar to the way portal handles LDAP users? If not, what is the best way to store user information outside of the mail server instance? Create an LDAP instance and extend the schema to support the mail classes and then use replication to push the users into the mail servers directory instance?

Correct, extending the schema on the master directory server and replicating down to the messaging server ldap instance the user info is the way to go.
This way you do not have to maintain two different sets of user data.
-Chris

Messaging Server and mix of local and remote server mailboxes?

Admittedly I am a messaging server noob. Sun came in and installed our Sun JES Server for us.
That server is our LDAP, mail, and IM server.
We would like to start using gmail for domains for some of our users, but not all of them.
We use Postini for spam filtering. Right now if someone from the Internet sends an email to our domain, the mail is filtered by postini and then proceeds onward to our mail server and then local delivery to the correct mailbox.
With Postini we believe we can set it so after filtering, some email accounts can proceed to our server while others proceed onto the gmail servers.
The problem I foresee though is when sending mail internally. When we send email in house, email doesn't go through Postini and just gets delivered locally.
Is there a way in the messaging server to make it so some address continue to be delivered locally while others continue on to a remote server (i.e. either to Postini or gmail servers directly) ?

slo_chewie wrote:
Does the email recipient address change when the email is sent to gmail i.e. does an email sent to [email protected] become [email protected]?
We've got google for domains setup, so users would retain a @domain.com address regardless if there mailbox was hosted on the internal server or hosted at google.You can make use of the mailRoutingAddress: user attribute and source routing to get the desired behaviour e.g.
=> Set the following value to the LDAP entry of the user who is hosted on the gmail server. The "[email protected]" address should match the users mail: address:
mailRoutingAddress: @gmail.com:[email protected]=> Ensure the following option has been tcp_local channel in your imta.cnf file. This option strips off the "@gmail.com" value of the recipient address before sending the email to the gmail.com servers.
dequeue_removerouteMake sure you run "./imsimta cnbuild;./imsimta restart" after modifying the imta.cnf file.
Regards,
Shane.

Server Admin, Mailing lists, server_mgr error

Hi,
Everytime I try to use SA to add a mailing list (or anything under Mail), I get a "A connection with a server or service was lost" error. In the system log, I get this:
host /Applications/Server/Server Admin.app/Contents/ MacOS/Server Admin: HTTPREQUESTFAILED: https://hostname:311/ commands/servermgr_mail: err=0 (write)\n
I have tried repairing permissions and rebooting the server. I tried restoring the servermgr_mail service to default configuration. Any other ideas?

don't use Server admin to add a maillist
connect through your web browser.
go to
http://servername.domain.com/mailman/admin
http://servername.domain.com/mailman/create
you may need to turn web service on.

Messaging Server and Calendar Server Mount points for SAN

Hi! Jay,
We are planning to configure "JES 05Q4" Messaging and Calendar Servers on 2 v490 Servers running Solaris 9.0, Sun Cluster, Sun Volume Manager and UFS. The Servers will be connected to the SAN (EMC Symmetrix) for storage.
I have the following questions:
1. What are the SAN mount points to be setup for Messaging Server?
I was planning to have the following on SAN:
- /opt/SUNWmsgsr
- /var/opt/SUNWmsgsr
- Sun Cluster (Global Devices)
Are there any other mount points that needs to be on SAN for Messaging to be configured on Sun Cluster?
2. What are the SAN mount points to be setup for Calendar Server?
I was planning to have the following on SAN:
- /opt/SUNWics5
- /var/opt/SUNWics5
- /etc/opt/SUNWics5
3. What are the SAN mount points to be setup for Web Server (v 6.0) for Delegated Admin 1.2?
- /opt/ES60 (Planned location for Web Server)
Delegated Admin will be installed under /opt/ES60/ida12
Directory server will be on its own cluster. Are there any other storage needs to be considered?
Also, Is there a good document that walks through step-by-step on how to install Messaging, Calendar and Web Server on 2 node Sun Cluster.
The installation document doesn't do a good job or atleast I am seeing a lot of gaps.
Thanks

Hi,
There are basically two choices..
a) Have local binaries in cluster nodes (e.g 2 nodes) ... which means there will be two sets of binaries, one on each node in your case.
Then when you configure the software ..you will have to point the data directory to a cluster filesystem which may not be neccasarily global. But this filsystem should be mountable on both nodes.
The advantage of this method is that ... during patching and similar system maintenance activities....the downtime is minimum...
The disadvantage is that you have to maintain two sets of binaries ..i.e patch twice.
The suggested filesystems can be e.g.
/opt for local binaries
/SJE/SUNWmsgr for data (used during configure option)
This will mean installing the binaries twice...
b) Having a single copy of binaries on clustered filesystem....
This was the norm in iMS5.2 era ...and Sun would recommend this...though I have seen type a) also for iMs 5.2
This means there should no configuration files in local fs. Everything related to iPlanet on clustered filesystem.
I have not come accross type b) post SUNONE i.e 6.x .....it seems 6.x has to keep some files on the local filesystem anyway..so b) is either not possible or needs some special configuration
so may be you should try a) ...
The Sequence would be ..
After the cluster framework is ready:
1) Insall the binaries on both side
2 ) Install agent on one side
3) switch the filesytem resource on any node
4) Configure the software with the clustered FS
5) Switch the filesystem resource on the other node and useconfig of first node.
Cheers--

64-bit messaging server and 32-bit libamsdk

While restarting the services and researching the mshttpd log file (/var/opt/SUNWmsgsr/messaging64/log/http) due to another problem, I found these log lines:
[02/Oct/2008:12:36:53 +0400] sunmail httpd[26768]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.3-6.03 (built Mar 14 2008; 64bit) shutting down
[02/Oct/2008:12:36:53 +0400] sunmail httpd[26768]: General Error: Error reading from IMAP server: Error 0
[02/Oct/2008:12:37:32 +0400] sunmail httpd[25696]: General Warning: mscertd_initialize: configuration has SMIME disabled
[02/Oct/2008:12:37:33 +0400] sunmail httpd[25696]: General Critical: Loading of libamsdk failed: Failure to load dynamic library: No such file or directory. IS SSO not enabled
[02/Oct/2008:12:37:33 +0400] sunmail httpd[25696]: General Information: uwcport=80,uwcsslport=443
[02/Oct/2008:12:37:33 +0400] sunmail httpd[25696]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.3-6.03 (built Mar 14 2008; 64bit) starting up
What concerned me was the report about libamsdk. I found a few of these in our system:
[root@sunmail /]# ls -la `find /opt | grep libamsdk`
-r--r--r-- 1 root other 1402764 Dec 6 2007 /opt/SUNWam/lib/libamsdk.so.2
lrwxrwxrwx 1 root root 13 Jul 15 23:30 /opt/SUNWics5/cal/lib/libamsdk.so -> libamsdk.so.2
-rwxr-xr-x 1 root bin 1402764 Jun 17 02:52 /opt/SUNWics5/cal/lib/libamsdk.so.2
lrwxrwxrwx 1 root root 13 Jul 15 23:41 /opt/SUNWmsgsr/messaging/lib/libamsdk.so -> libamsdk.so.2
-rwxr-xr-x 1 bin bin 1402764 Mar 15 2008 /opt/SUNWmsgsr/messaging/lib/libamsdk.so.2
-rwxr-xr-x 1 bin bin 1402764 Mar 15 2008 /opt/SUNWmsgsr/messaging64/lib/libamsdk.so.2
[root@sunmail /]# diff /opt/SUNWam/lib/libamsdk.so.2 /opt/SUNWmsgsr/messaging64/lib/libamsdk.so.2
[root@sunmail /]# file /opt/SUNWmsgsr/messaging64/lib/libamsdk.so.2
/opt/SUNWmsgsr/messaging64/lib/libamsdk.so.2: ELF 32-bit LSB dynamic lib 80386 Version 1 [FPU], dynamically linked, not stripped
It seems that we only have the 32-bit version; I guess it can't be linked by a 64-bit executable (and it would have to be stored in an amd64/ subdirectory).
Is this anyhow worth noticing? AM SSO via Sun Webserver agents works anyway :)
As before, we're using Messaging server 6.3 x64 and Access Manager 7.1, latest patches:
# imsimta version
Sun Java(tm) System Messaging Server 6.3-6.03 (built Mar 14 2008; 64bit)
libimta.so 6.3-6.03 (built 17:15:08, Mar 14 2008; 64bit)
SunOS sunmail 5.10 Generic_127112-07 i86pc i386 i86pc
126480-09__MSG63__x86-64
126357-01__AM71_x86

JimKlimov wrote:
While restarting the services and researching the mshttpd log file (/var/opt/SUNWmsgsr/messaging64/log/http) due to another problem, I found these log lines:
[02/Oct/2008:12:37:33 +0400] sunmail httpd[25696]: General Critical: Loading of libamsdk failed: Failure to load dynamic library: No such file or directory. IS SSO not enabledTry running:
./stop-msg http;
truss -leaf -wall -rall -o /tmp/truss.out ./start-msg httpThen review the /tmp/truss.out file to see what libamsdk files were attempting to be loaded.
Is this anyhow worth noticing? AM SSO via Sun Webserver agents works anyway :)AM SSO will not work if you try to access the Messenger Express interface. If you only use UWC/CE 6.3 then you don't need Messenger Express AM SSO working.
Regards,
Shane.

Importing Wildcard Cert into Messaging Server and Comms Express???

Hi all, does anyone know how I can import a wildcard certificate, private key, & CA cert into Messaging Server 6.3 and Comms Express 6.3?
We have 3 files from DigiCert that I think need to be imported:
1) A wildcard cert from DigiCert
2) The DigiCert CA cert
3) The private key
Thanks in advance,
Stewart

Hi, we are upgrading from iMS5.2 to SJMS6.3 later this year but in the mean time i'm trying to work out how to import the wildcard certs, key, etc from DigiCert into our current iMS5.2. I've heard it can be done.
We're currently using a cert from Verisign in our iMS5.2 environment.
Stewart

Problens whit Messaging Server and Symantec Scan Engine

Hi!
I have installed Symantec Scan Engine 5.0 to check virus in my Messaging Server, but when I try to open the administration interface of Scan Engine installed in port 8004, it appeared the messages:
�Loading Java Subprogram�
�Do you want to install the subprogram distributed by Symanted? Yes
�please wait��.�
�Subprogram com.symantec.gui.guidelines.ScanEngine Applet started�
But the apple did not load at all.
I have installed the right java version.
bash-2.05# java -version
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05) Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
And I open it in Internet Explorer 6.0 sp2.
bash-2.05# ./imsimta version
Sun Java(tm) System Messaging Server 6.2 (built Dec 2 2004) libimta.so 6.2 (built 00:34:23, Dec 2 2004) SunOS projes 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Blade-1500
I didn�t know what is wrong and why I can not start the administration interface. Can someone help me?
Thanks in advance.

What "symantec is supported" means, is that we've tested our product with the scan engine, and it is known to work. It does not mean we have a clue how to support the product itself, only the integration with our product.
The problem you describe appears to be within the Symantec product itself, not the integration with our product. It's just the integration we would know how to support.
Also, please do understand:
1. This forum is not an official Support offering. It's a public forum.
2. Any answers given here are given by folk that donate their time, with no compensation.
If you want "technical support", it's something you would have to open a support case for. In this case, what is likely to happen is what happened above. "it's a problem in your Symantec product. Please call them".
I'm not trying to blow you off, it's just that your Symantec Scan Engine is a "black box" to us. We learned enough about it to integrate it into Messaging Server, but not enough to "support" it as a product, nor should we.

Messaging Server and Mailing Lists

Similar Messages

Maybe you are looking for