Messaging Server Settings for MMR Directories

Hi! Jay,
We have 2 - Directory Servers (v 5.2 - JES 05Q4) in MMR mode and we are testing Messaging Server (JES 05Q4). We are using schema 1, delegated admin and PAB for address book.
I have a question related to paburi attribute on the user entry. How do I list both the directory servers on this attribute for connecting to PAB. Basically we are looking for an automatic failover from DS #1 to DS #2.
I set the corresponding attributes on msg.conf as follows:
local.ldaphost = "ds1 ds2"
local.service.pab.ldaphost ="ds1 ds2"
local.ugldaphost="ds1 ds2"
I was wondering if there was a way to make paburi attribute MMR aware. In the sense that it can failover frfrom one directory to the other in case of directory failure.
Thanks

Hi ,
Thi is very much possible .. the whole trick is in replicating the NetscapeRoot data source in the MMR configuration. I know that once you replicate NetscapeRoot one of the servers will loose its configuration but U can do this. Here is what I have done:
Configure your Primary LDAP server say ldap-1
Configure your Secondary LDAP server but whicle doing so store the inforamtion about the secondary (ldap-2) in the primary.
Once done access ldap-1 from Console and Export NetscapeRoot into and LDIF file.
Now Unconfigure your secondary ldap server ... make sure that u run the unconfigure program rater than deleting the files. Now reconfigure ldap-2 server so that the configuration lies in the same server also configure the admin server make sure that u sore the configuration in the same path as you did while configuring the ldap-2 server .
Now you access the ldap-1 server its pretty obviuos that u cannot see the ldap-2 server configration by any means but u still hold the ldif file .. now Initialize the NetscapeRoot with the previously exprted ldif file and enable replication to the ldap-2 then u will have all the info you wanted in both the servers.
Now start configuring the Messaging Server . Then use the configutl ... the ugldap all that u have done .. this will work for sure .. I have done this and tested .. the messaging server can use either of the directory servers acording to the avaliability ..,,,,,
The only drawback of this is configuration is u cannot use this for a system already in use .. you can but at your risk .. for a fresh installation this will work for sure.......
Regards,
Srinivas.

Similar Messages

Server settings for remote Server in Flash Builder 4.5 Premium

Has anyone figured this out? Seems like everyone is talking about FlashBuilder that comes with PHP and that doesn't help me. So I'm still having trouble moving my mobile app to a remote server and I have FlashBuilder 4.5 Premium without PHP.
I have created a PHP project outside of Flash Builder and then I have connected to it using the Data/Service tab, but then it ask for the server information and that is where I'm having the issues.
It works create with the setting like this.
MAC:
Server Options
Web Root: /Applications/MAMP/htdocs
Root URL: http://localhost/
But when you try to export a release build or just like to test it, and insert your server settings.
Server Options
Web Root: /home/username/domain_name/
Root URL: http://mydomain.com
It doesn't Validate which in turn won't let the project work. Also it would be nice to put the remote server in there for testing instead of just for release builds. Any one have an answer. Every tutorial or explanation shows localhost.
thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Server settings for using other pop3/imap applications?

trying to set up mac mail on my motorola q, and can't quie get the mail to work. What should the setting be:
For incoming and outgoing server names
For account name (should it include @and after)
SSL?
Thanks

Hello guys,
I have found a solution: In ZendFramework/library/Zend/Amf/Response/Http.php linenumber 59:
$ssl = $_SERVER['HTTPS']; is given an error.
I did this:
$_SERVER['HTTPS'] = 'off';
$ssl = $_SERVER['HTTPS'];
So add this line....
And it works...
Hope it works for you too.
Ooh, and don't forget to follow the instruction of TweenOut.
Erik.
Van: tweenOut [email protected]
Verzonden: dinsdag 20 december 2011 18:42
Aan: EGJ Steens
Onderwerp: Server settings for remote Server in Flash Builder 4.5 Premium
Re: Server settings for remote Server in Flash Builder 4.5 Premium
created by tweenOut <http://forums.adobe.com/people/tweenOut> in Using Flash Builder - View the full discussion <http://forums.adobe.com/message/4095833#4095833

Changing message server port for ABAP+Java Instance

Hi,
We had change our message server port for the Java instance from 3607 to 3667.
We did this using the j2ee config tool. We also verified this information through the console config.
But when we look into system info URL using the URL as shown below, we still that the old message server port is being used. We have recycled the instance couple of times , but does not seem to help.
http://dfudsbw1.dfna.corp.dom:50700/sap/monitoring/SystemInfo
Any ideas where else we have to change the port no. for the message server

Hi guys,
I solved this on my own with documentation help from SAP.
I had to change the port no. in the Global dispatcher and Global server area as well.
Please see details from SAP below.
"Message Server: Changing Ports/Hosts shows which areas need to be adjusted if
the port or host of the message server changes. Ports are, of course, changed in the
instance profile of the Central Services instance. In the example, the port 3677 and
the HTTP port 8177 have been set, and the new host is called twdfxxx. You need to
use the Config Tool to set these values. For each instance, you need to maintain the
corresponding values for the Message server host and Message server port on the
Message Server and Bootstrap tab page. The connection details for dispatchers or
servers to the message server are maintained in the Cluster Manager. As shown in the
figure, the ms.host and ms.port are maintained, respectively, in the Cluster Manager
with Global Dispatcher and the Global Server. After you have maintained all of the
parameters, you can start the instances."

Server settings for nokia 5800 xpress music

hiii,
can anyone tell me wat are the server settings for updating nokia 5800 xpressmusic via phone itself. whenevr i try to update it, it just shows define server settings noe and thats it doesn't work,.. this is a big problem. can anyone help please..
regards amit

xsb91 wrote:
What WLAN Wizard?
If you want to connect to WLAN, just go to the connections in settings, and choose WLAN. Refresh the list and connect to any which is available. If you see none, you're in a wireless-free area.
Near enough what i posted mate, so why bother
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

HT4864 what are the server settings for icloud mail on samsung galaxy tab 2 outgoing works but incoming dosent

what are the server settings for icloud mail on samsung galaxy tab 2 outgoing works but incoming dosent

Found out the is a bug in the mail app built into android using another app instead now

Duplicate Server Settings for Backup

I am wanting to duplicate my current Apple Server settings (10.4.8) into a new, virgin Server installation. We are basically only using IMAP mail and VPN on the server.
I have found "migration" instructions from 10.3 to 10.4, that show how settings can be saved to a USB flash stick and then used to install the new server. I haven't been able to get these instructions to work however, the new server installation doesn't see the flash stick.
Does anyone have any comprehensive instructions for this kind of 10.4 - 10.4 migration?

what settings are you trying to migrate?
Are you replacing the existing server or adding another (if replacing, we'll want to give you cloning instructions- it's much easier)
What hardware, are they both PPC?
What might help you... in ServerAdmin, when you click a service, then click settings, you will see a document icon in the bottom left of the window. If you drag this icon to the desktop, you will save a plist of that services config. Do this for all services you wish to copy the config from. Move those documents to the new server ANY way you can, you can use mac.com, email, file server, burn a CD, it doesn't matter.
On the new server, open Server Admin, then the service you wish to config, click settings, then drag the plist to the ServerAdmin window. This will load all settings from the old to the new.
But.... don't go through all those steps if your intention is to replace the old server... cloning can be much much easier.
If you need more of an assist, please post more about what exactly you want to copy from one server to the other. Explain what services will be in use on each machine.
Jeff

Mail and ical randomly change internal server settings for exchange account

Ever since upgrading to Lion, I randomly find that my exchange mail account, my exchange calendar account and my exchange address book go offline. When I look at the settings, I find that the internal server settings have been changed from the correct address to the word "sites". Cannot figure this one out. I have deleted and added the accounts numerous times. Cannot find any error messages.
Just wondering if anyone else has every experienced this.
Debbie

The last OSX update 10.8.1 fix it, uncheck Server Autodiscovery and it work perfect

Apple Mail Client not saving server settings for iCloud?

I am trying to add my iCloud email to the Apple mail client.
As I work through the wizard to setup all the necessary entries inclduing the for the Incoming and outgoing mail settings but when the account is finally created in the
Mail client, the incoming mail server settings are not set and the box they are shown in is not available for editing.
The mail client vs is 6.6
I have tried this several times with the same end result, any help appreciated????

You don't manually add your iCloud email account using Mountain Lion. Instead, go to System Preferences>iCloud, sign into your iCloud account and check Mail. This will automatically add the account with the proper settings.

Changing Mail Server Settings for Other IMAP

Hello,
         I'm an Admin for a treatment center and one of our psychiatrists has a BB Tour. He asked me the other day if I could set up his email account on our exchange server for him on his phone. Going through the mail setup wizard I selected "Other" account and set it up for IMAP and then it asked me for his email address and password. It took the domain name and then assumed the mail server names were as such. Now in a perfect world, this wouldnt be an issue. I recently took over for a complete moron and this guy has our MX records pointing to a 3rd party company where all of our outside emails go and then the Outlook clients are set up to pop this box in addition to the Exchange setup (I know its totally lame). What Ive done for everyone else is just setup a IMAP account using the server IP address and mail works fine for them. I cannot for the life of me find where I can actually edit the mail server names for the IMAP account I create on his BB Tour. Is this a limitation the phone? Or am I not looking in the right place. Thanks!
Solved!
Go to Solution.

Yup -- refer back to my first reply where I said to use the carrier BIS website...while I didn't say it quite so clearly, I did not say to use the on-device email setup wizards.
The device interface to BIS (aka email setup wizards) and the carrier website interface to BIS have subtle differences. For what you need to do, you need to use the carrier website from a PC/browser. Here is the link:
https://bis.na.blackberry.com/html?brand=vzw
If you have not yet created BIS credentials, you will need to. I find it easier to first create those on the device interface and then use them in the web interface. Afterwards, you will have to use the credentials in the device interface, but there is a "remember me" box so you will only have to enter them once.
Personally, I rarely use the device interface...a full keyboard, mouse, and monitor are so much simpler for doing things than a tiny BB screen/keyboard. But that's just me.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

SMTP server settings for Ziggo

I have a new iMac, and try to set up my Ziggo e-mail account. I have followed all instructions. I receive incoming e-mails from POP.Ziggo.nl, but I cannot send e-mails - the iMac cannot connect to the smtp.ziggo.nl server. Can anyone help? I have "un-ticked" the SSL settings. Everything seems OK, but same error message everytime "cannot send message using smtp.ziggo.nl server". Can anyone help????

Hi Steve,
Don't know if I can help you but I'll try.
Do you have an email with ziggo.nl or something like casema.nl?
If you do have something other than ziggo.nl then you have to change the smpt "address".
For the last couple of days I've been getting a message that the Ziggo certificate is not trusted. This too is causing a problem with sending. What I do is wait until I get the message you have, then click on connect.

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

Outgoing server settings for MAC MAIL with multiple accounts?!

if i got paid to do this, my outgoing mail server issues would be somewhat amusing but as it stands they are really extremely annoying.
i have multiple email accounts (multiple addresses with multiple hosts - gmails, domain based email, me.com address etcetera).
does ANYONE know if there is an FAQ on what is recommended with respect to the settings on whether to tell mail to ONLY USE the one outgoing server and/or anything with the other settings?
i feel like i am in a pachinko parlor when i send mail because there is constantly an error of some kind and then i try dropping the mail through a different outgoing server by selecting a different one from the list and i just do this until it goes out. oftentimes i don't find out it didn't go out until the NEXT DAY becasue i am working and this alert gets hidden behind my other windows where i do actual productive work.
any ideas? i have two domain based websites (multiple emails with two SMTP addresses), two GMail accounts and me.com...
THANKS!

hi. CS. thanks.
do you know what this does as a practical matter? i mean, is it NECESSARY to check this box? will it try other outgoing servers and NOT WORK if you don't check this box? conversely, will it NOT try other outgouing servers if this one is unavailable if i check this (presumably the answer is yes here). i mean - am i likely to run into fewer problems by checking this box and i assume it is necessary to use the OUTGOING SERVER of the actual domain you are trying to send mail from as opposed to - for example - using GMAIL outgoing server for everything because you think you will get less errors than sending from your email domain outgoing server.
you know what i am saying? i mean, i get a bootload of errors and actually can't send mail these days even though Connection Doctor is telling me everything is hunky dory.
also, what is meant by "Offline"? do i have to go in and tell it to take everything on line for some reason and is this totally separate (telling it to go online) from checking things in Connection Doctor?
THANK YOU

MQSeries Server Settings for connection to XI server

Dear All,
I am doing MQSeries 5.2 -> Sender JMS adapter-> XI -> Receiver RFC adapter -> R/3.
Can anybody suggest me what are the things in MQSeries which should be running at MQSeries server(like queue,channel, queue manager - their types) to get a message by sender JMS adapter in XI?
Should the queue manager be of local or remote type? If it local, then can XI connect to this queue manager in MQSeries.
In the above things, i am asking only about MQSeries server things and not of XI server things - just to clarify.
So if somebody has connected MQSeries server to XI server, then please give replies to my above queries. It is slightly urgent.
Thanks and Regards,
Rajeev Gupta

Dear Chirag,
i have already deployed the JMS adapter correctly in XI server.............
i want to know is anything left on MQSeries server for me to do as a prerequisite to send message to XI server........
So please reply to my above queries.
Currently i am getting the following error in my sender JMS adapter:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '<IP_ADRESS>:<MQ_QUEUE_MANAGER>'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:546)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1137)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:799)
com.ibm.mq.MQException: Message catalog not found
at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:171)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:228)
i have written '<IP_ADRESS>:<MQ_QUEUE_MANAGER>' just to hide the data - i am getting <IP_ADRESS> as IP Adress i gave in JMS adapter and <MQ_QUEUE_MANAGER> as Queue Manager i gave in JMS adapter.
Dear All,
Any inputs to my above queries.
Thanks and Regards,
Rajeev Gupta

Server settings for iCal push?

How to get iCal to push from server to computers running os x 10.6?

You need to use the search function for this question in this forum. There are many many threads on how to get this running.
First - download and read all the Apple SLS server docs.
Second - run by Barnes and Noble and pick up a copy of SLS - Developer Reference. (I have no affiliation)
Concerning the iPhone.
Forget it.
'nuff said on that one...
Edit: After reading this again, it appeared to me that I was sounding like an a$$. Sorry. It was not intended that way.
However, the forum does have numerous threads on how to get push working for iCal on 10.6 clients. It does work and it works quite well for me on my network. Pay particular attention to the order you setup your SLS. DNS must function without errors. You must have an OD master to authenticate users against. Mail services must be enabled to use external invites.
Alot of these services rely on web based protocols and it's "push" features are built around XMPP PubSub protocol which means you must have a working iChat server configured and running and web services running. SSL is needed for most of it.
If you are new to SLS (or Mac server in general) it is worth every single penny of $25 for one month of lynda.com. They have a few Mac OS Server lessons in their library.
As for the iphone - please don't start this one again. It doesn't work. There is no built in OTA sync service agent in the iphone OS. Wait for iPhone 4.0 like the rest of us.
Message was edited by: sbkeith

Messaging Server Settings for MMR Directories

Similar Messages

Maybe you are looking for