Messaging Server won't start up, or acts strangely
One of the config files has disappeared, or the Messaging Server
is acting "strangely".
<P>
Because of bugs in the Berkeley DB code, it is possible for a configuration
file to become corrupted. The Messaging Server will remove a severly
corrupted config file, but there is a threshold of corruption that may
impact server operation and may not cause files to be deleted.
<P>
If you notice that one of the config files is gone (your server won't start),
or that your server is acting strangely, DO NOT REPLACE IT WITH A BACKUP COPY.
This will most likely re-introduce the corruption. Instead, make note of
all the configuration changes you've made with the Messaging Server admin gui.
The easiest way to do this is to print out each page. Then replace the
config file with a clean one from the install directory or from the media.
<P>
Before re-starting the server, check each admin gui page to make sure it
matches your printout, and make any necessary changes. Then start the server.
<P>
The installed configuration files are located in the message spool area,
by default: /var/spool/postoffice/config and they are:<BR>
<P>
Account-Handler<BR>
Account-Manager<BR>
AutoReply-Handler<BR>
Configuration-Manager<BR>
Dispatch<BR>
Error-Handler<BR>
Finger-Server<BR>
IMAP4-Server<BR>
MTA-Accounts<BR>
Mailbox-Deliver<BR>
POP3-Server<BR>
Program-Deliver<BR>
SMTP-Accept<BR>
SMTP-Deliver<BR>
SMTP-Router<BR>
UNIX-Deliver<BR>
<P>
Un-configured copies of all these files may be found under the directory
you installed the server at:
<P>
/install/server/data<BR>
<P>
The fresh files will all have a .install appended to them.
Shut the computer dow, remove the power cord and all peripherals, wait for 30 seconds, replace the power cod and press the start button at the same time.
If you do not have the iSight, try the steps in [this|http://docs.info.apple.com/article.html?artnum=300908] Apple article.
Similar Messages
-
I am complete newbie to doing admin for Crystal Servers, forgive the question:
(Win Server 2003 r 2 / CR XI)
Report Application Server won't start which is preventing other servers from starting in CCM.
Reboot machine several times and still having the issue.
Get an error msg in Windows before login window appears stating that the crystalras.exe application requested a runtime to terminiate in an unusual way (.Net error).
I get the following error msg in my event viewer.
From Event Viewer:
Event Type: Error
Event Source: BusinessObjects_crystalras
Event Category: Startup
Event ID: 33000
Date: 7/27/2010
Time: 4:24:34 PM
User: N/A
Computer: CRYSTAL
Description:
Failed to start the Report Application Server.
From Logging:
Timestamp ProcessID ThreadID Message
Tue Jul 27 20:24:34 2010 2496 3176 assert failure: (.\sso_wrapper.cpp:94). (SFileSys::exists(ssPath) && SFileSys::isDir(ssPath) : Platform binaries directory not valid.).
We installed some Windows Server Updates about 3 months ago (at the time, over 70 Windows updates were installed) but, this problem hasn't shown up until 2 or 3 weeks ago. I think a .Net Service Pack might have been part of the updates at that time. When we did the updates, Windows was shutdown and updates installed per the preferred option of Windows. But now when rebooting since that time, the server continually reccomends the install updates and shutdown option. Do we need to rollback the server to date prior those updates if possible?
I have also uninstalled .Net Framework back to 2.0. Is 1.0 or 1.1 the max that will work with XI?
Should I also try to uninstall all other Windows updates?
Thanks in advance for any help, EdPost this query to the [Business Objects Enterprise Administration|BI Platform; forum.
-
Logitech Media Server won't start
Hi,
Logitech Media Server won’t start after I clean installed 10.10.1 and migrated my user data from time machine. I tried tuned of firewall and clean install LMS many times and tried different version of LMS from 7.7.4 to 7.9 but none of them worked.
I builded a new user account for testing, LMS works well in this new user account.
Is there anything I can do to fix my old user account?
Thank you.Thank you very much! I did not know about the nightly builds. LMS has pretty much worked throughout the years; it may have needed an update now and then but I never had to go looking for beta versions.
I held off upgrading my Mac Pro -- which acts as a server for iTunes and other things around the house -- to Yosemite until today. All was well except for getting LMS to start. I was pretty bummed at the prospect of not having my tunes on my Squeezebox radio. In any case, I'm glad I found my answer in 5 seconds here at the Apple forums. Rock on. -
I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve -
After Setting Up SSO Managed Server Won't Start
I am using the Oracle supplied white paper to set up SSO using Active Directory. Following those instructions everything was working and testing correctly until I added the NegotiateIdentityAsserter provider to the list of WLS providers. Now the managed server won't start. The admin server starts without any errors and goes to the RUNNING state. But the Start BI Services command window gets to the wls.alive: prompt and hangs. And hangs. Eventually the window goes away and it may throw an error but I've never seen it. You can login to the WLS console and EM without a problem. Remove the new provider and everything comes up normally. I have looked at the krb5.ini and krb5login.conf files and even rewritten them from scratch without any change in behavior.
While looking for answers I ran into the SPNEGOCheck webapp that Oracle makes available to diagnose problems. It says everything is OK until it parses the krb5login.conf and then complains that the Username associated with SPN in AD is blank and so doesn't match the SPN specified in the krblogin config. But I can't see anything wrong in the files themselves.
from the log:
In section 'libdefaults'
LSA: Found Ticket
LSA: Made NewWeakGlobalRef
LSA: Found PrincipalName
LSA: Made NewWeakGlobalRef
LSA: Found DerValue
LSA: Made NewWeakGlobalRef
LSA: Found EncryptionKey
LSA: Made NewWeakGlobalRef
LSA: Found TicketFlags
LSA: Made NewWeakGlobalRef
LSA: Found KerberosTime
LSA: Made NewWeakGlobalRef
LSA: Found String
LSA: Made NewWeakGlobalRef
LSA: Found DerValue constructor
LSA: Found Ticket constructor
LSA: Found PrincipalName constructor
LSA: Found EncryptionKey constructor
LSA: Found TicketFlags constructor
LSA: Found KerberosTime constructor
LSA: Finished OnLoad processing
Config name: C:\Windows\krb5.ini
KdcAccessibility: reset
KdcAccessibility: reset
Reachable? true
Connection seems to have succeeded.
Parsing section contents 'com.sun.security.jgss.krb5.accept { com.sun.security.auth.module.Krb5LoginModule required principal="[email protected]" keyTab=biwhse1a.keytab useKeyTab=true storeKey=true debug=true;};'
Section name: 'com.sun.security.jgss.krb5.accept'
Getting next NV pair beginning at 'principal="[email protected]" keyTab=biwhse1a.keytab useKeyTab=true storeKey=true debug=true'
NVPair name: 'principal' value: '[email protected]'
NVPair name: 'keyTab' value: 'biwhse1a.keytab'
NVPair name: 'useKeyTab' value: 'true'
NVPair name: 'storeKey' value: 'true'
Got back 4 name/value pairs.
section com.sun.security.jgss.krb5.accept should probably contain a setting for debug=true
Section com.sun.security.jgss.krb5.accept seems OK
The krb5.ini file:
[libdefaults]
default_realm = SRS1.COM
default_tkt_enctypes = des-cbc-crc
default_tgs_enctypes = des-cbc-crc
ticket_lifetime = 600
[realms]
SRS1.COM = {
kdc = 129.58.120.200
admin_server = adc01.srs1.com
default_domain = SRS1.COM
[domain_realm]
.srs1.com = SRS1.COM
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
The krb5login.conf file:
com.sun.security.jgss.krb5.accept {
com.sun.security.auth.module.Krb5LoginModule required
principal="[email protected]"
keyTab=biwhse1a.keytab
useKeyTab=true
storeKey=true
debug=true;
[D:\] setspn -L bi_kerb_prin
Registered ServicePrincipalNames for CN=bi_kerb_prin,OU=Non-Person Users,OU=WRC Users,DC=srs1,DC=com:
HTTP/biwhse1a.srs1.com
HTTP/biwhse1a
[D:\]
OBIEE 11.1.1.6.2 BP2
Windows Server 2008 SP1Did you try -Djava.security.krb5.conf=<path>/krb5.conf before the %EXTRA_JAVA_PROPERTIES%. in your C:\OBI\user_projects\domains\bifoundation_domain\bin\setDomainEnv.cmd .?
Also change your JAAS config file and try with
com.sun.security.jgss.krb5.initiate {
com.sun.security.auth.module.Krb5LoginModule required
principal="HTTP/[email protected]"
keyTab=biwhse1a.keytab
useKeyTab=true
storeKey=true
debug=true;
com.sun.security.jgss.krb5.accept {
com.sun.security.auth.module.Krb5LoginModule required
principal="HTTP/[email protected]"
keyTab=biwhse1a.keytab
useKeyTab=true
storeKey=true
debug=true;
Now restart and see.
Hope this helps. Pls mark if it does.
Thanks,
SVS
Edited by: SSVS on Mar 17, 2013 11:47 PM -
Wrong JRE Runtime Lib Path on Win2K--Admin Server Won't Start
Running Sun One Web Server 6.0 SP6 on a Windows 2000 server, I inadvertently entered a typo in the iPlanet Administration Server's Global Settings, "Configure JRE/JDK Paths" link.
In the "JRE Runtime Lib Path" field I typed "jjk1.3.1_03" instead of "jdk1.3.1_03". Now the Sun One web server won't start, so I can't go into the Administrative Server to fix the Jre Runtime Lib Path. I havent' been able to find any file where I can change that erroneous setting either. Is it a Registry entry?
I also tried adding the correct JRE Runtime Lib Path at the end of the Windows PATH environment variable on the server, but that didn't help.Yes we checked the Registry settings and fixed the typo in the path associated with the key NSES_JRE_RUNTIME_LIBPATH. That should have fixed the problem, but the Sun One web server still wouldn't start.
Moved to plan B and removed then reinstalled the Sun One web server. Now it starts and all is well.
Thanks for helping everyone. This also raised the issue for us of whether or not we are entitled to individual support from Sun since we paid for the Sun One web server. According to the web site, the answer is NO - unless we pay $3,000 for a support contract. Other vendors who recommended using Sun One with their products say YES. We're still tracking that down. -
X server won't start after recent catalyst-test and kernel upgrade
Hi,
after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
[ 114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 116.077] (WW) Falling back to old probe method for fglrx
[ 116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 116.101] (EE) fglrx(0): DAL initialization failed!
[ 116.101] (EE) fglrx(0): Display Infrastructure Failed
[ 116.101] (EE) fglrx(0): PreInit failed
[ 116.212] (EE) Screen(s) found, but none have a usable configuration.
[ 116.212]
Fatal server error:
[ 116.212] no screens found
[ 116.212] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 116.212] (EE)
[ 116.515] Server terminated with error (1). Closing log file.
My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
I've tried:
- to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
- to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
- to use open-source drivers (poor performance, overheating)
- to check nomodeset option (present at all kernel images in generated grub.cfg)
Unfortunately, I could not find any similar issue solved in past few days...Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
Edit: catalyst-test 13.2 beta works with linux 3.7.4.
Last edited by sirkubador (2013-02-05 14:24:44) -
Message server will not start on AIX 6
I have a standard ECC6 system running the 185 kernel and ORACLE 10.2.0.2 on AIX 6. which is giving me a problem. I also have 2 other systems apparently with the same configuration which operate perfectly.
The problem I have is that if I stop the system the message server will not start. If I wait until the following day the message server starts pefectly. I have not been able to test stopping the system and waiting an hour or so and then restarting in the same day, so I do not know if the overnight wait is relevant.
dev_ms contains the following:
[Thr 01] Fri Jun 19 23:58:54 2009
[Thr 01] WLM Tag 'HQS/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 163
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 254088
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 254088) [msxxserv_mt. 1835]
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3227]
[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:3950) [nixxi.cpp 3227]
[Thr 01] *** ERROR => MsSCommInit: NiBufListen(3950) (rc=NIESERV_USED) [msxxserv
_mt. 10186]
[Thr 01] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv_mt. 1886]
[Thr 01] *** ERROR => main: MsSInit [msxxserv_mt. 5951]
[Thr 01] ***LOG Q02=> MsSHalt, MSStop (Msg Server 254088) [msxxserv_mt. 5999]
Regards,
Paul Richardson
Certified Netweaver, Portal and Migration Consultant
Sandpiper I.T. LtdHi,
Thr 01 ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp p 3227]
Looks like port 3227 is already used. You can check the ports by netstat -a -n from your command prompts. Also check your settings in /etc/services and /etc/hosts files.
Check your filewall rules/disable antivirus if any and give a go.
Hope this helps.
Manoj -
Server won't start/Bad JVM?
Running CFMX7.02. After noticing that the Java version was
1.4 something (the version originally supplied with the product in
2006), and that I couldn't do things like use the "browse server"
controls in CFAdministrator without getting Java errors, I
repointed the CF engine to use the version supplied by Java on
their website today. Now the server won't start.
From the CF error log:
Error: no `server' JVM at `C:\Program
Files\Java\jre1.6.0_03\bin\server\jvm.dll'.
Windows event log is no help, reporting that is has received
"server-specific error code 2". Based on the advice of some earlier
topic, I tried to restart the service with "interact with the
Desktop" checked, but no DOS window there.
Any ideas? I'd be happy to point CF back to its own version
of Java, if I could do so without interacting with the
Administrator (which requires starting the server).quote:
Originally posted by:
JR "Bob" Dobbs
1. CF 7 does not support JVMs higher than 1.4.x
Ah. That explains
that.
quote:
2. You should install the full JDK so you'll get the server
version of the JVM
3. You change change the JVM version by editing the
jvm.config file.
Got it--and thanks for the extremely quick reply.
However, what can I do to fix the Java errors that keep me
from using the GUI file-browsing components in the CFAdministrator,
since I can't upgrade the main Java engine? -
EPMA Dimension server won't start using SSL enabled Database
Has anyone had any luck configuring EPMA 11.1.2.2 or 11.1.2.1 EPMA Dimension server with a JDBC SSL connection? I am using the following url to configure my SSL-enabled database:
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=slc00qox)(PORT=1529))(CONNECT_DATA=(SERVICE_NAME=slc00qox.us.oracle.com)))
and the Dimension server won't start. Other Foundation, Essbase and Reporting repository connections work with same URL. Getting an error in Event Log:
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start because database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException ORA-12537: TNS:connection closed at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String configFileName, Boolean restorePastInstanceSessions, Boolean enableCaching)
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.Service.Main.InitializeSessionManager()
at Hyperion.DimensionServer.Service.Main.Start()
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
AND
[EPMA Server Startup] ERROR SVR_ERR_PROCESSMGR_CANT_INIT_SESSIONMGR:Cannot initialize the Session Manager.Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start because database connectivity could not be established. ---> Oracle.DataAccess.Client.OracleException ORA-12537: TNS:connection closed at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString()
at Hyperion.DimensionServer.SessionManager.SessionManager.Initialize(String configFileName, Boolean restorePastInstanceSessions, Boolean enableCaching)
--- End of inner exception stack trace ---
at Hyperion.DimensionServer.Service.Main.InitializeSessionManager()
at Hyperion.DimensionServer.Service.Main.Start()As you have backup you can try this:
Restore your master database backup to another instance of SQL Server and in the "To
database:" section of the Restore Database dialog box, use an alternate database name such as "recover_master" to avoid conflict with the master database on this instance of SQL Server. This will cause the mdf/ldf to be named "recover_master.mdf"
and "recover_master_1.ldf". Then detach the
recover_master database, go into the file system, copy the recover_master.mdf and recover_master_1.ldf to the instance of SQL Server with the corrupt master database. Delete the corrupt master.mdf and mastlog.ldf files, rename recover_master.mdf to master.mdf,
and rename recover_master_1.ldf to mastlog.ldf. Now you're ready to try starting the SQL Server service again!
http://blogs.technet.com/b/fort_sql/archive/2011/02/01/the-easiest-way-to-rebuild-the-sql-server-master-database.aspx
Once master is online you can restore other database. -
Error Message and Server won't start
The server will not start and I receive this error message in
the error log:
[1]javax.naming.ServiceUnavailableException: The connection
to the remote JNDI server on host 127.0.0.1 at port 2909 has failed
(as have all backup hosts listed, if any) - please verify that the
server is running and the NamingService is available [Root
exception is java.net.ConnectException: Connection refused:
connect]Looks like you cannot connect to LDAP. Are you configured correctly?
-
Error message and won't start up
I had a new Ipod Nano 6th Gen as part of the 1st Gen replacement program.
I tried to load some music onto it and now it won't start up and when I connect it to my computer all I get is the error message
" The iPod software update server could not contacted. The server does not support this version of iTunes"
I have checked and I have an internet connection and the latest version of iTunes.
Please helpHello there, Paul-n-Sue.
The following Knowledge Base article provides some great information and troubleshooting recommendations:
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
You may also want to try downloading and installing the latest iTuens directly:
Apple - iTunes - Download iTunes Now
https://www.apple.com/itunes/download/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Message Server cannot be started and throw ERROR: MsSetWorkDir: getcwd
When I would like to start the ERP SAP instance by startsap or by MMC, below error message is found:
(1138942) New Child Process created.
(1138942) Starting local Command:
Command: ms.sapECD_DVEBMGS11
pf=/usr/sap/ECD/SYS/profile/ECD_DVEBMGS11_mdev01
[Thr 1] Fri May 28 17:55:56 2010
[Thr 1] ***ERROR => MsSetWorkDir: getcwd (13: Permission denied) [msuxserv_mt. 274]
[Thr 1] ***LOG Q0I=> MsSetWorkDir, getcwd ( getcwd 13) [msuxserv_mt. 280]
ThrRecMtxUnlock: PANIC: #unlock > #lock, tag: "not set"
So it caused the message sever cannot be started and cannot connect.
Is there any required services need to be enabled or
which directory or file permission need to be set in order to fix this problem?
As our AIX server implemented security hardening on OS/Application level already.
System Information:
Server: Power 7 AIX OS 6.1
SAP: ERP 6.0 EHP4 SR1 / NW 7.0 (ABAP)
Database: Oracle 10.2.0.4
Below are exctracted from dev_ms:
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 1] Fri May 28 17:30:53 2010
[Thr 1] WLM Tag 'ECD/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 1323234
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1323234)
[msxxserv_mt. 1853]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/ECD/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.24.60.13] mdev01 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [192.168.24.13] 192.168.24.13 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname =
mdev01.housingauthority.gov.hk
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] MsHttpOwnDomain: own domain[1] = housingauthority.gov.hk
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsECD (3611) ***
[Thr 1] *** I listen to internal port 3911 (3911) ***
[Thr 1] *** HTTP port 8111 state LISTEN ***
[Thr 1] CUSTOMER KEY: >I1980732359<
[Thr 1] build version=701.2008.03.06
[Thr 1] Fri May 28 17:31:01 2010
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups
(403 Forbidden)
Signal 15 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x110b9f780
=> Stack address = 0xfffffffffffecc0
=> Stack low = 0xfffffffffffc3d0
=> Stack high = 0xffffffffffff820
=> Stack Trace:
poll() at 0x9000000001428f4
SiPoll() at 0x1000419e4
select__10SISEL_POLLFiPUi() at 0x10000499c
selectInt__10NISEL_IMPLFiPUiPUc() at 0x100050c5c
select__10NISEL_IMPLFiPUi() at 0x100050a34
NiSelSelect() at 0x10004eb18
MsSRqWaitFor() at 0x1000c5784
MsSLoop() at 0x1000cb1b0
nlsui_main() at 0x1000d1ec0
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000001428f4
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffecc0
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x00000001102cb7d8
r14 = 0x0000000000000003 r15 = 0x0ffffffffffff8a0
r16 = 0x0ffffffffffff8c0 r17 = 0x0000000000000003
r18 = 0x0000000000000010 r19 = 0x000000011002e280
r20 = 0x0000000110044318 r21 = 0x00000001101025b0
r22 = 0xfffffffffffffffb r23 = 0x00000001100442b8
r24 = 0x0000000000000000 r25 = 0x000000011001df44
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0000000000000002
r30 = 0x09001000a0083f38 r31 = 0x0fffffffffffffe0
[Thr 1] Fri May 28 17:35:34 2010
[Thr 1] ***LOG Q0E=> SigIGenAction, signal ( 15) [sigux_mt.c 1067]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 1323234)
[msxxserv_mt. 6021]
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x110b9f780
=> Stack address = 0xfffffffffffecc0
=> Stack low = 0xfffffffffffc3d0
=> Stack high = 0xffffffffffff820
=> Stack Trace:
poll() at 0x9000000001428f4
SiPoll() at 0x1000419e4
select__10SISEL_POLLFiPUi() at 0x10000499c
selectInt__10NISEL_IMPLFiPUiPUc() at 0x100050c5c
select__10NISEL_IMPLFiPUi() at 0x100050a34
NiSelSelect() at 0x10004eb18
MsSRqWaitFor() at 0x1000c5784
MsSLoop() at 0x1000cb1b0
nlsui_main() at 0x1000d1ec0
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000001428f4
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffecc0
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x00000001102cb7d8
r14 = 0x0000000000000003 r15 = 0x0ffffffffffff8a0
r16 = 0x0ffffffffffff8c0 r17 = 0x0000000000000003
r18 = 0x0000000000000010 r19 = 0x000000011002e280
r20 = 0x0000000110044318 r21 = 0x00000001101025b0
r22 = 0xfffffffffffffffb r23 = 0x00000001100442b8
r24 = 0x0000000000000000 r25 = 0x000000011001df44
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0000000000000002
r30 = 0x09001000a0083f38 r31 = 0x0fffffffffffffe0
[Thr 1] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c 1067]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 1323234)
[msxxserv_mt. 6021]
Thanks a lot for help.
Edited by: Tommy Lee on May 31, 2010 7:52 AM
Edited by: Tommy Lee on May 31, 2010 7:53 AM
Edited by: Tommy Lee on May 31, 2010 7:53 AM
Edited by: Tommy Lee on May 31, 2010 7:54 AM
Edited by: Tommy Lee on May 31, 2010 7:55 AM
Edited by: Tommy Lee on May 31, 2010 7:58 AMWell, it is definitely a file system issue but of course it won't be an nfs issue if you have a local mount point. I resolved this issue in UNIX by unmounting the file system is question.
I didn't realize how important the . and .. directories are to SAP executables.
In my /usr/sap/<SID> path, only "." showed up in when using the ls -l command with the <sid>adm user.
As root though, the "." and ".." paths were listed.
After unmounting the file system I saw that the path was owned by roo.system.
Changed the file system ownership to <sid>adm:sapsys with full permissions(probably not needed).
All is well... took quite a while to find this... then of course, found OSS note 1917102 which pointed to OSS note 130683 (which had my solution. note title is misleading and I overlooked it at first.)
Hope this saves someone valuable time.
Freddie Cummings -
11.1.1.5 Presentation Server won't start automatically
Hi, gurus. Interesting problem with 11.1.1.5. 4 of 5 OBIEE services start automatically. Presentation Server doesn't. An excerpt from sawlog0.log is shown below. What's odd is that even though it fails when starting automatically, we can go into Fusion Middleware and start it manually - no problems there. So it can start, and from that point everything works great, it just won't start along with all of the other services.
Any ideas?
[2012-08-22T14:29:47.000-05:00] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0:29] [tid: 1107712320] Failed to restore ctx from reference[[
File:executioncontext.cpp
Line:286
Location:
saw.dms.conext.unwrap
saw.threadpool
saw.threads
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0:29
ThreadID: 1107712320
[2012-08-22T14:29:47.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0] [tid: ] Server shutdown initiated by OPMN.[[
File:socketrpcserver.cpp
Line:818
Location:
saw.rpc.server.listen
saw.sawserver
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0
[2012-08-22T14:29:47.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid: 004lvOK0SKHCwkYzLoePOA00014t000001,0
[2012-08-22T14:30:33.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 120325.0800 BP2 64-bit) are starting up.[[
File:sawserver.cpp
Line:465
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:35.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:41.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.5.0 (Build 120325.0800 BP2 64-bit) are starting up.[[
File:sawserver.cpp
Line:465
Location:
saw.sawserver
ecid:
[2012-08-22T14:30:41.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
saw.sawserver
ecid:
]]Alas, although out-of-sync GUIDs fit all of the clues, that wasn't the answer.
The problem still exists. Here's the relevant portion of the opmn.log file.
These first five sections represent an attempted start of all services in Fusion Middleware by clicking Start All
Request 1fa starts the BI Server successfully.
Request 1fb starts the BI Scheduler successfully.
Request 1fc attempts to start the Presentation Server but fails.
Request 1fd starts the Java Host successfully.
Request 1fe starts the Cluster Controller successfully.
So the Presentation Server will not start automatically as a part of Start All.
However, manually clicking 'Start Selected' for the Presentation Server (request 236 below) starts the service. So the short version is that we can start it manually, but not as a part of Start All.
[2012-08-23T16:03:58][opmn][TRACE:1][667][OPMN]Request 1fa Started. Command: /start?ias-component=coreapplication_obis1
[2012-08-23T16:03:58][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:0)
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643) [No addresses for the request.]
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643)
[2012-08-23T16:03:59][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693061
[2012-08-23T16:04:01][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obis1~OracleBIServerComponent~coreapplication_obis1~1 (1181693061:8643)
[2012-08-23T16:04:01][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fa Completed. Command: /start?ias-component=coreapplication_obis1
[2012-08-23T16:04:01][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fb Started. Command: /start?ias-component=coreapplication_obisch1
[2012-08-23T16:04:01][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obisch1~OracleBISchedulerComponent~coreapplication_obisch1~1 (1181693062:0)
[2012-08-23T16:04:03][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obisch1~OracleBISchedulerComponent~coreapplication_obisch1~1 (1181693062:8995)
[2012-08-23T16:04:03][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fb Completed. Command: /start?ias-component=coreapplication_obisch1
[2012-08-23T16:04:03][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fc Started. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:03][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:0)
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021) [No addresses matched the properties for the request.]
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021)
[2012-08-23T16:04:05][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021) [No addresses matched the properties for the request.]
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9021)
[2012-08-23T16:04:07][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:09][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:0)
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043) [No addresses matched the properties for the request.]
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043)
[2012-08-23T16:04:11][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:13][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fc Completed. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043) [No addresses matched the properties for the request.]
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693063:9043)
[2012-08-23T16:04:13][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693063
[2012-08-23T16:04:14][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fd Started. Command: /start?ias-component=coreapplication_obijh1
[2012-08-23T16:04:14][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obijh1~OracleBIJavaHostComponent~coreapplication_obijh1~1 (1181693064:0)
[2012-08-23T16:04:16][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obijh1~OracleBIJavaHostComponent~coreapplication_obijh1~1 (1181693064:9053)
[2012-08-23T16:04:16][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fd Completed. Command: /start?ias-component=coreapplication_obijh1
[2012-08-23T16:04:16][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 1fe Started. Command: /start?ias-component=coreapplication_obiccs1
[2012-08-23T16:04:16][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obiccs1~OracleBIClusterControllerComponent~BIClusterController~1 (1181693065:0)
[2012-08-23T16:04:18][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obiccs1~OracleBIClusterControllerComponent~BIClusterController~1 (1181693065:9079)
[2012-08-23T16:04:18][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 1fe Completed. Command: /start?ias-component=coreapplication_obiccs1
[2012-08-23T16:04:53][opmn][TRACE:1][667][OPMN][code:pm-requests]Request 236 Started. Command: /start?ias-component=coreapplication_obips1
[2012-08-23T16:04:53][opmn][TRACE:1][662][OPMN][code:pm-process]Starting Process: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:0)
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537) [No addresses matched the properties for the request.]
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537)
[2012-08-23T16:04:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:1181693066
[2012-08-23T16:04:56][opmn][TRACE:1][665][OPMN][code:pm-process]Process Alive: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1181693066:9537)
[2012-08-23T16:04:56][opmn][TRACE:1][668][OPMN][code:pm-requests]Request 236 Completed. Command: /start?ias-component=coreapplication_obips1 -
I've been trying to start the weblogic server, installed locally, but it won't start. In checking the server log I see this as the first Error reported:
java.sql.SQLException: [Security:090735]The DBMS connection was not usable
I changed all ref from localhost to my actual IP and that did not help.
Any ideas what the issue could be?I did not specify anything reg. a database. It was all created for me by the system, so in checking the config.xml I see something like this:
<jdbc-store>
<name>pfProliferationJMSStore</name>
<prefix-name>PF_PROLIFERATION_</prefix-name>
<data-source>portalDataSourceNeverXA</data-source>
<target>AdminServer</target>
</jdbc-store>
Since I have not created a database, nor created any explicit connections to one, what else could the issue be?
Maybe you are looking for
-
Wie stellt sich Adobe das neue Creative Cloud Modell vor?
Wenn ich mir zum Beispiel als Privatanwender einen Photoshop CS6 kaufe, dann kostet mich das einmalig knapp 900 Euro. Wenn ich aber beim neuen Modell einsteige zahle ich monatlich knapp 25 Euro. Das heißt nach ziemlich genau 3 Jahren zahle ich drauf
-
2TB Time Capsule suddenly full after only a few months?
Hello all, Apologies in advance if this is a question that's already been answered. I've been searching through threads, but didn't seem to see it. I have a late 2009 iMac (27 inch, 2.8 GHz i7, 4GB Ram) that had a hard drive affected by the Seagate
-
Help create systemd .service file for Teeworlds server
Hi there. I maintain one package the provide server for the game Teeworlds (teeworlds-zcatch in AUR). I'd like to have a ".service" file to be able to run the server in background, maybe even in startup, and saving the log (it send some stuff to stdo
-
Unable to create or build a DefaultDomain in jdeveloper
I tried creating a default domain from jdeveloper Version 11.1.1.6.0 and Version 11.1.2.3.0. But it is not getting created. Only the below message is displayed in jdev message log. *[02:32:37 PM] Creating Integrated Weblogic domain...* CreateDefaultD
-
Frozen process on report server after killing user process
Hi, I've following problem. When user kill request(user process on PC) on creating report during process (PDF file, report server 10g), the process on OAS stay frozen and nobody is able to create own report. When we use for creating report(PDF) Adobe