Messaging services with ldap replication again

Dear at_bajwa and fslaat ,
My case is similar the following forum:
http://swforum.sun.com/jive/thread.jspa?forumID=15&threadID=47877
I folllowing but still cant successful,
could you mind give me more detail step on MMR !!!
Thanks
epee

To the original poster,
First, determine how much downtime is acceptable and then determine what your DR plan should be.
Trying to make a "hot" standby mailserver is a not an easy task. What I would do is just do a complete backup of the current system and load a standalone machine. Then, from that time forward, all you really need to restore are the DS data directory and the mailstore itself. When ever you do a system change, ie patches, then do another level 0 dump and restore to the backup box. If the primary box crashes, restore your latest mailstore and DS data tapes to the backup box, plug it into the network and you're up and running.
For a fairly small mailstore, you could probably run rsync (remote filesystem sync utility) to a third machine, so you always have a fairly recent copy of the mailstore.
Once you have that procedure in place, you now know your DR recovery time. If that is unacceptable, then the next step is probably using Sun Cluster 3.x. But now, you're talking big $$$ for a dual-hosted disk array and supported servers and network hardware.
The time to recover and your tolerable data loss will determine how much you spend. The smaller those numbers, the more it will cost.
One of my lessons learned, run 'mboxutil -l ' on a regular basis (at least nightly) and save it to a file. That list of folders has saved me a lot of grief over the past months. I have users who constantly misplace /rename/delete folders. It's a lot quicker than messing around with backup tapes to find out which folders did or didn't exist.
HTH,
Roger S.

Similar Messages

  • Messaging services with ldap replication

    using JES2004_q2
    Every single component is working fine. Now I am trying to establish the replication with other LDAP for user data. To achieve this I deleted the current ou=People and ou=Groups under my default domain o=xyz.com. And created and initialized NewSubsuffix with the same data for ou=people and ou=Groups under the o=xyz.com on configuration>data.
    Replication is working fine with other ldap and as well the search. But messaging is not. On imsimta test come out �5.1.1 unknown or illegal alises� but I can see the user entry in search also I can see the entry msg-admin-test.xyz.com-20040824154024Z, which is required to host the domain and run the messaging services.
    Any idea why messaging is not working?

    As I indicated replication and search for user entry is working fine as we can see all attributes for entry.
    Acess logs at directory server is like that when I try to run ./imsimta test
    30/Aug/2004 12:25:00 -0500     86     113     115     RESULT err=0 tag=101 nentries=1 etime=11
    30/Aug/2004 12:25:00 -0500     86     108     110     RESULT err=0 tag=101 nentries=1 etime=14
    30/Aug/2004 12:25:00 -0500     86     114     116     SRCH base="cn=config" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="nsslapd-accesslog nsslapd-accesslog-list"
    30/Aug/2004 12:25:00 -0500     86     114     116     RESULT err=0 tag=101 nentries=1 etime=0
    30/Aug/2004 12:25:00 -0500     86     112     114     RESULT err=0 tag=101 nentries=1 etime=12
    30/Aug/2004 12:25:00 -0500     86     115     117     SRCH base="cn=config" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="nsslapd-maxdescriptors nsslapd-reservedescriptors"
    30/Aug/2004 12:25:00 -0500     86     115     117     RESULT err=0 tag=101 nentries=1 etime=0
    30/Aug/2004 12:25:05 -0500     88     -1     -1     fd=59 slot=59 LDAP connection from 10.0.17.254 to 10.0.17.254
    30/Aug/2004 12:25:05 -0500     88     0     1     BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=testwebmail.xyz.com, ou=fsl.org.jm, o=NetscapeRoot" method=128 version=2
    30/Aug/2004 12:25:05 -0500     88     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot"
    30/Aug/2004 12:25:05 -0500     88     1     2     SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    30/Aug/2004 12:25:06 -0500     88     1     2     RESULT err=0 tag=101 nentries=31 etime=1
    30/Aug/2004 12:25:06 -0500     89     -1     -1     fd=63 slot=63 LDAP connection from 10.0.17.254 to 10.0.17.254
    30/Aug/2004 12:25:06 -0500     89     0     1     BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=testwebmail.xyz.com, ou=fsl.org.jm, o=NetscapeRoot" method=128 version=2
    30/Aug/2004 12:25:06 -0500     89     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot"
    30/Aug/2004 12:25:06 -0500     89     1     2     SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=testwebmail.xyz.com,ou=fsl.org.jm,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
    30/Aug/2004 12:25:06 -0500     89     1     2     RESULT err=0 tag=101 nentries=31 etime=0
    30/Aug/2004 12:25:06 -0500     89     2     3     UNBIND
    30/Aug/2004 12:25:06 -0500     89     2     -1     closing - U1
    30/Aug/2004 12:25:07 -0500     89     -1     -1     closed.
    30/Aug/2004 12:25:12 -0500     88     -1     -1     closing - B1
    30/Aug/2004 12:25:12 -0500     88     -1     -1     closed.
    30/Aug/2004 12:25:23 -0500     90     -1     -1     fd=59 slot=59 LDAP connection from 10.0.17.254 to 10.0.17.254
    30/Aug/2004 12:25:23 -0500     90     0     1     BIND dn="uid=msg-admin-testwebmail.xyz.com-20040727154027Z, ou=People, o=fsl.org.jm,o=fsl.org.jm" method=128 version=3
    30/Aug/2004 12:25:23 -0500     90     0     1     RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=msg-admin-testwebmail.xyz.com-20040727154027z,ou=people,o=fsl.org.jm,o=fsl.org.jm"
    30/Aug/2004 12:25:23 -0500     90     1     2     SRCH base="o=fsl.org.jm" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=testwebmail.xyz.com)(sunPreferredDomain=testwebmail.xyz.com)))" attrs=ALL
    30/Aug/2004 12:25:23 -0500     90     1     2     RESULT err=0 tag=101 nentries=0 etime=0
    30/Aug/2004 12:25:23 -0500     90     2     3     SRCH base="o=fsl.org.jm" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=fsl.org.jm)(sunPreferredDomain=fsl.org.jm)))" attrs=ALL
    30/Aug/2004 12:25:23 -0500     90     2     3     RESULT err=0 tag=101 nentries=0 etime=0
    and when I try to loging via http. I can see these error on http loggong under messaging server
    [30/Aug/2004:12:31:50 -0500] testwebmail httpd[10960]: Account Notice: [10.x.x.x:2075] domain not found
    [30/Aug/2004:12:31:50 -0500] testwebmail httpd[10960]: Account Notice: badlogin: [10.x.x.x.:2075] plaintext testuser : user not found
    consumer ldap is not using messaging so we don't need to do the replication of PAB
    I know Configuration data is tricking. After deleting the ou=People and ou=Groups under o=xyz.com I can see these ou but once I created these as subsuffix under o=xyz.com I can see the entry for ou=People and Ou=Groups with all the intialized entries under Directory tab > o=xyz.com

  • Integrating Hyperion Shared services with LDAP

    Hi All,
    I have a quick question regarding managing LDAP users using Shared services. I was able to create connection with LDAP using "anonymous bind" but now when I try to see the LDAP users in Shared services , it says no records. How can I see the records ?
    Please help.

    Suggest you talk to your IT people who setup that specific id. Tell them you need the Distinguished Name (DN) of that user -- usually they will have the user placed in a set of containers which may be several levels deep depending on how they organize the directory.
    If you were using Active Directory rather than LDAP you could use AD Explorer to locate the user and you can find the DN yourself. AD Explorer is available at: http://technet.microsoft.com/en-us/sysinternals/bb963907
    Regards,
    John A. Booth
    http://www.metavero.com

  • Secure OSB Service with LDAP

    Hi Friends,
    Greetings!
    Is there a way to secure an OSB service so that user will be able to access it only if they pass their AD/LDAP userid and password?
    Note: I know I can add servie accounts. However I want to avoid adding a guge number of users/services acounts manually.
    Thanks,
    Sachin.

    Hi Sachin,
    You have to configure webogic security realm to add AD/LDAP Authentication provider.
    http://onlineappsdba.com/index.php/2010/02/04/how-to-integrate-weblogic-with-oracle-internet-directory-for-login-authentication/
    In order to secure OSB service you can enable HTTPS or have message level security for the same.
    >know I can add servie accounts. However I want to avoid adding a guge number of users/services acounts manually.
    No Need to maintain n nunber of accounts per n number of users.
    use Basic Authentication/Custom Authentication/OWSM username token service policy to to authenticate username/password with AD/LDAP.
    For Authorization: Use Transport/Message Level Authorization at OSB Service level
    Regards,
    Abhinav Gupta

  • Idsync with LDAP replication

    I have 2 LDAPs set up in a replication. LDAP2 is the failover for LDAP1. Will I be able to set up password synchronization on both of them from a single AD?
    The need is if LDAP1 goes down, LDAP 2 should be able to server the apps along with the synchronization taking place. Has anyone done this setup.

    I have 2 LDAPs set up in a replication. LDAP2 is the failover for LDAP1. Will I be able to set up password synchronization on both of them from a single AD?
    The need is if LDAP1 goes down, LDAP 2 should be able to server the apps along with the synchronization taking place. Has anyone done this setup.

  • Oracle User Messaging Service unable to connect to Mail server through SSL

    Hi,
    I have a SOA server setup with User Messaging Service, with email driver installed. I set it up to connect to an SMTP server over SSL.
    Using the user messaging sample app from samplecode.oracle.com, I encountered the following error:
    javax.mail.MessagingException: Exception reading response; nested exception is: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    After doing some research, I copied the cert from the Mail server and put in in the JDK keystore (jdk\jre\lib\security\cacert) using keytool -importcert command. Then I did configure the SOA server to use that keystore. However I still encountered the above mentioned exception.
    Anyone has encountered and solve the problem?
    Appreciate any pointers :)
    yee thian

    Hi,
    SAP support suggested to check the following notes:
    827958 - Javascript Errors in IC WebClient, Messaging does not work
    871851 and 872720 - JRE version
    828884 - SAM (Simple ABAP messaging)
    844929
    924443
    927566
    927567
    Regards,
    Bruno Mikio

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no jo

    i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • Cant put pdfs or music on.the message i get when itunes comes up is "iTunes was unable to load data class information from sync services.reconnect or try again later." and its just my itouch i tried another one and was able to put songs and pdfs on it...

    I cant put pdfs or music on my itouch,it wont sync.the message i get when itunes comes up is "iTunes was unable to load data class information from sync services.reconnect or try again later." and its just my itouch i tried another one and was able to put songs and pdfs on it...please help!

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • HT1923 I was trying to update itunes on my computer received an error message so I uninstalled and reinstalled itunes. the download stopped with this message "Service 'Apple Mobile Device' failed to start. I have an ipad 2 purchased in 2011.

    I was trying to update itunes on my computer that has windows vista. during the update I received an error message; so I uninstalled itunes and reinstalled it. the instatlation process stopped with this message: "Service 'Apple Mobile Device' failed to start. Verify thta you have sufficient priviledges to start system services." I have used an ipad 2 since 2011 and have never had a problem with my itunes account or my ipad until now.
    What steps do I need to complete to get my itunes account up and running again?

    Hi Kayleenfromwi,
    Thanks for using Apple Support Communities.  You may need to restart the Apple Mobile Device Service.  This article has instructions for doing this:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    If that doesn't resolve the issue, I would recommend trying the steps in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • In App Purchase showing "Service Not available" Message box with error code 805a01f4

    Hi all ,
            I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
    in a bit . This error code may be helpful : 805a01f4 ." 
    Please tell me how to resolve .
    Thank you

    Thanks for your response .
    I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After  few seconds got a message on my number that "Dear customer,
    thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ? 

  • No message services configured on unlocked vodafone curve now with Tigo sim card

    Recently unlocked my curve 8520 from vodafone Ireland.  I am based in Central America now and it now has a Tigo El Salvador chip.  I can receive emails, texts and BBM.  Can also send texts & BBM but cannot send emails.  The phone previously worked with my office BES but they have since migrated from blackberry.  The message after i attempt to send an email is "no message services configured. You will only be able to save draft".
    Any help would be appreciated.
    Thanks.

    Several things to check...
    Options > Advanced > Default Services.
    Under Messages > do you have your default email listed? If not, choose it if you can.
    If it is not present...
    Please try this, using your BlackBerry browser...
    1)
    • Go to mobile.blackberry.com OR to www.blackberry.com/integrate
    • Scroll down to Communication and then to Email.
    • Choose the appropriate email set up options, and either edit the current account in question and save. Or you can delete that account and then return and set it up again.
    If that works and completes your email setup/editing, good.
    If not, follow these additional instructions:
    2) Register HRT: (OS5) Home Screen > Options > Advanced Options > Host Routing Table > Scroll to any line entry and > press the Menu key > and then click Register Now. If you have an OS 6 or OS 7 device, Look at Options > Device > Advanced > Host Routing Table, etc.
    3) Resend Service Books: Article ID: KB02830 How to send the service books for a BlackBerry Internet Service account. http://www.blackberry.com/btsc/KB02830
    4) Then, with the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    5) Now, return to the 1) mobile.blackberry.com email setup as mentioned above and follow that.
    Hopefully that will get things going again for you!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • I get this message when i try to sync and download my iphone:  itunes was unable to load data class information from sync services, reconnect or try again later.  what does that mean and who do you fix it

    I get this message when i try to sync and download my iphone,   ITUNES was unable to load data class information from sync services,  reconnect or try again later.    this has happened twice.  i have not downloaded by phone in several months.  the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything.   today.  when i got the message i just unplugged it.
    help

    http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

  • I keep getting the following message every time i plug in my Iphone to Itunes on my windows vista computer  Itunes was unable to load data class information from sync services. reconnect or try again later.  any suggestions pls  Mario

    I keep getting the following message every time i plug in my Iphone3gs to Itunes on my windows vista computer
    Itunes was unable to load data class information from sync services. reconnect or try again later.
    any suggestions pls
    Mario

    The article says that I should upgrade to the latest iTunes. I am on the latest iTunes version.
    If you could read just a tiny little bit further, under the "Additional Information" section immediately after that, it says:
    If you are still experiencing this issue when syncing, or have not installed Xcode 4 and get this alert:
    Follow the troubleshooting steps in Mac OS X v10.5, v10.6: Resetting the SyncServices folder.
    If the issue is still unresolved, follow steps in Sync Services: Advanced troubleshooting for contact and calendar syncing.
    Have you tried those measures?

Maybe you are looking for