Messaging through PC Suite

Not able to Browse Messages and send the messages through PC Suite. Pls Advise for the same

Hi narsimha
Can you let us know which phone model and which version of PC Suite you are referring to please?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • 9300i sending mesages through PC suite

    HI
    Has anyone tried to sync or send messages through the PC suing PC Suite for 9300i , my device shows sending failed. Both PC suite and device firmware are the latest.

    Open PC Suite - Help - Reinstall PC Suite support to your phone (maybe it was lost in phone firmware update?)

  • Sync contacts through PC Suite and MfE

    In the user reviews on the shop site where I ordered my N900, I read from a user that once you have sync'ed your contacts and/or calendar to the N900 through PC Suite, there is no way anymore to sync through MfE without completely reflashing the device.
    Is this something that other users have experienced as well? It worries me a bit as I have just sync'ed my contacts through PC Suite but was planning to sync them through Gmail Sync in the future.

    I have this problem too.  PC Suite clearly recognises the E51 and the other programs in the suite seem to work OK.  But when I select Sync nothing happens.  I have switched off Nokia email messaging just in case that was causing the problem but it makes no difference.
    Has anyone found out what the solution is yet?

  • Problems with importing text messages from PC Suit...

    Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
     I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
     Thanks for your help

    Most phones only allows importing of draft and archived box for SMS.
    To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
    If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
    What's the law of the jungle?

  • How do you export messages from Ovi Suite?

    As the title says, how do you export messages from Ovi Suite?
    I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
    Here is how I would do it in the Nokia PC Suite.
    1. I click the Messages icon to open Nokia Communication Center.
    2. I click on the Messages option on the left pane to view only messages.
    3. In the main window I mark the messages I want to export.
    4. Then I go to File menu and chose Export.
    5. Choose destination folder and I'm all set to export my messages from my Nokia.
    I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
    That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
    And this **bleep** Ovi Suite is supposed to replace PC Suite?
    Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.

    I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
    However, I'd like to suggest the following, if possible.
    1. Make Nokia OVI Suite be able to handle a huge number of messages.
    2. Have the option to export only selected messages.
    Nokia 701 Dark Steel on Belle FP2

  • LE_SHP_DELIVERY_PROC Error message through Log .

    Hi,
    I'm working on a BADI LE_SHP_DELIVERY_PROC inside the method FILL_DELIVERY_ITEM. I have to show an error message over here. If i passed like MESSAGE e000(zless) WITH text-006 text-007 it is displaying message but it is come out from the layout of the transaction in scope.
    Te be more specific, when the pop up of message comes out and after that the user click on the "Exit" button, the  system should go back on the previous layout of the report to allow the user making another selection.
    I'm using Vl10D transaction.
    Now I'm trying to generate the error message through log by CT_LOG internal table . I have to block the deliveries whichever is creating through this transaction. If for a particular STO there are different loading points then I need to block the deliveries.
    I'm trying to block the current delivery using  IS_LIKP-LIFSK = 'X' and also I need to block the previous delivery IT_XLIKP-LIFSK = 'X'.
    strange thing is happening with STO which has 2 deliveries are getting created (because error msg is not getting tirggered thorugh log),  though I have blocked the deliveries.
    Could you please let me know how can i populate this error message through log as well as I can block the deliveries?
    Thanks in advance,
    Abhijit

    Hi
    To lock the delivery, see Note 198137 - VL10: Customer-specific enhancements / user exits and use this userexits. To populate the log I think that using the structure CT_LOG in the BADI is OK. Check when are called the userexit and BADI.
    I hope this helps you
    Regards
    Eduardo

  • Error while Submiting Support message through Web browser

    Hi Gurus
    I am geting error while submiting Support message through Web browser i.e BSP . Please find the error message below
    "Error: The system could not create the message because of an RFC connection "NONE " error Service-specific Csutomizing missing for transaction ZLFN"
    Note: ZLFN is our Service Desk Message type.
    Any ideas where i am doing wrong?
    Points will be rewarded
    Thanks
    Bhaskar

    Hello,
    check if when you configured your new transaction type ZLFN you have included a corresponding entry in view CRMC_SERVICE_H.
    If the transaction type is missing in this view, you have this error.
    Regards,
    Raquel Cunha

  • Create support desk message through "Help"

    Dear friends,
       I am creating support desk message in my Sol Man system through "Help" menu. At that time, system automatically calling transaction type "SLF1".
    Now i have created the new transaction type "ZZSL" by copying from SLF1.
    Now i want the system to call the new transaction type "ZZSL", when i create a support ticket through "Help".
    How to enable this?
    Please guide me on this.
    Regadrs
    Senthil

    Dear Anand,
       Thank you for the reply. But this one will work, if i create a support desk message through t.code NOTIF_CREATE.
    But i am NOT creating the support desk message through the transaction NOTIF_CREATE.
    I think you are of aware of creating the support desk message through "Help" menu.
    At that time i want to link transaction type "ZZSL".
    or..can u give u mail ID ..i will send the screen shots
    Senthil

  • I can no longer receive e-mail messages through my @mac/@me account. I can still send e-mail messages, though. I believe there may have been recent attempts to hack into my account. I have changed my password, but wonder how to start receiving mail again?

    I can no longer receive e-mail messages through my @mac/@me account, though I still seem to be able to send messages. I believe there may have been recent attempts to hack into my Mail account (my LinkedIn and Facebook accounts were both hacked three days ago and a scam/phishing message sent to my contacts, and I know there was at least an attempt made to hack into one of my e-mail accounts). I have already changed my Apple password, but how do I start receiving mail again?
    (And I should also say that I'm a little surprised there was no alert from Apple of suspicious activity on my account, if such was the case. Instead, when I logged into my account via Mobile Me three days ago I noticed that all messages in my inbox were gone as well as all of my contacts. I assume this was related to the current problem.)
    Thanks for all responses.

    The problem has been solved with the help of a MobileMe online counsellor. My MobileMe account had in fact been hacked into and the fraudster had been redirecting my e-mail messages to a phony account that he controlled. We took the forward off and reset all my passwords and security questions, which solved the immediate problem.
    Thx.

  • Can't View text Message on PC suite 6.86.9.0

    Phone: N82
    OS: Windows XP Media Edition SP2
    Connectivity: USB with CA-101 Cable
    i'm been using PC suite 6.85.14 from past 3 months.. everything works fine, recently new update to ver 6.86.9.0.
    i start having problem reading & Send text message from PC suite. the rest just working fine. i can backup, view contacts, sync calendar & contacts.
    i was thought it was because the new version might have some bug, i uninstalled this new version, cable driver, pc connectivity solution and install back ver 6.85.14.
    same thing happen with error message "unable to read text message from phone", when i press new sms button, on top showing "Text message editor - no phone connected" but it is connected. i can do other things..
    anyone know what is the problem??

    16-Apr-2008 04:36 PM
    cheey wrote:
    Phone: N82
    OS: Windows XP Media Edition SP2
    Connectivity: USB with CA-101 Cable
    i'm been using PC suite 6.85.14 from past 3 months.. everything works fine, recently new update to ver 6.86.9.0.
    i start having problem reading & Send text message from PC suite. the rest just working fine. i can backup, view contacts, sync calendar & contacts.
    i was thought it was because the new version might have some bug, i uninstalled this new version, cable driver, pc connectivity solution and install back ver 6.85.14.
    same thing happen with error message "unable to read text message from phone", when i press new sms button, on top showing "Text message editor - no phone connected" but it is connected. i can do other things..
    anyone know what is the problem??
    Try to do these steps mentioned here /discussions/board/message?board.id=pcsuite&view=by_date_ascending&message.id=25290#M25290
    and report back on the results please.
    mjboia

  • How do i get text messaging through my macbook pro?

    how do i get text messaging through my macbook pro?

    Welcome to Apple Support Communities
    If you have an iPhone, iPad or iPod touch and you use iMessage, you can use it in your Mac if you want. OS X Mountain Lion includes Messages, that allows you to use iMessage.
    First, check that your computer is supported > http://www.apple.com/osx/specs If so, open  > About this Mac, and see what OS X version you have:
    10.5 or older: you have to upgrade first to Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    10.6 or 10.7: open  > Software Update, and install the most recent version. Then, open the App Store and purchase OS X Mountain Lion.
    10.8: you are already using OS X Mountain Lion, so open the Messages app.
    While OS X Mountain Lion is being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com
    If you aren't referring to iMessage, you can't send text messages in your computer

  • Problem in delivering Picture Messages through Java SMPP client

    I m working on development of SMPP Client, using Java. In it�s development I didn�t used any API from eny vendor, and implemented purely in Java. I am facing one unusual problem in receiving of Picture Messages. Also, I have one C based client application.
    I m sending picture message through both client application(s) to be delivered over different handset(s). I have tested many different cases, but could not conclude to any solution. The behavioral cases are as follows;
    When I sent same picture message through Java SMPP client on Nokia 1100, it get received with prompt �Picture Message Received�. And on viewing it, �Message cannot be displayed�, is informed and no picture message get displayed. Till now it happens for every caseto this handst, but get properly displayed on Nokia 32xx / 53xx.
    Whereas while sending through the C SMPP Client on Nokia 1100, sometime it get displayed and sometimes it doesn�t. Same prompts follows on not receiving right picture message while using Java SMPP Client
    I m not understanding why;
    It doesn�t get delivered correctly a picture message, every time I submits it to deliver on 1100 while sending through C based,
    And why It doesn�t get delivered correctly at all while sending through Java SMPP client on 1100 whereas it get delivered correctly over other Nokia model handset.
    Kindly, anyone make me solve out the prob���.

    Hi,
    Even we have implemented the Java SMPP client, to sending the picture message as embeded SMS.
    If you do not have issue to share the SMPPClient which is sending the picture message, I can look into the code and help you. Let me know, I can share my personal email id.
    Edited by: sanmetalica on Apr 14, 2008 6:01 AM

  • I have to send messages through UDP multicast and unicast from same port. In Labview I tried that it throws error. I heard it is possible by means of Datagram (UDP unicast and multicast) Port Sharing. How can it be achieved in Labview?

    I have to send UDP multicast and Unicast messages to a remote port from a single source/local port. I tried by opening UDP unicast and multicast in the same port and got the expected error. I tried by opening a unicast connection and sending unicast messages.After that when multicast messages has to send I closed unicast and opened multicast in the same port.This is not throwing any error. But my requirenment is to comminicate with another application in C ++ which recieves this data, throwing an error of lost connectivity and both the applications are not abled to communicate properly. 
    In the other application with C++ this is implemented using port sharing. So how port sharing can be implemented in labview so that I can send both multicast and unicast messages from the same port?
    Thanks in advance

    UDP is a sessionless protocol, meaning that anyone listening on the specified port CAN receive the data. CAN because as you noted there is no guarantee in the protocol that it will be received. And if you send the data not to a specific address but a multicast address not only one computer can receive it but in fact every computer on the same subnet listening to that multicast address and depending on the TTL of the packet also computers in neighbouring subnets, although that last one is not a very reliable operation since routers can be configured to drop multicast packages anyhow despite of a different TTL saying otherwise.
    Accordingly there is no real way to make sure that a receiving UDP port is not already in use, since you don't build up a connection. UDP is more or less analogous to shouting your messages through a megaphone, and anyone listening on the right frequency (port) can hear it. You do bind the sender socket to a specific port number but that makes little difference.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • BPM, serialization messages through XI

    Hello,
    I want to achieve the following:
    A business process receives and manages each message through XI in the same order as the adapter engine has sent this message (EOIO) to the BPM.
    Therefore I use  the fork step (Necessary branches = 1).
    The first branch receives messages and appends each message to a list. (Never ending iteration: 1 = 1). To receive each message I use a dummy correlation id like a version attribute of the message type (e.g. 1.0).
    The second branch manages this message list how long as the last message in the list is managed (Iteration: ReveivedMessage.MessageId != MessageList[n].MessageId.
    The process also sends messages EOIO.
    I have tested it and it works. But I have never seen such a process and so I'm not sure whether this process reveals any errors.
    Can anybody give me an hint whether this process is correct?
    Regards
    Marc

    Hey Marc,
    your questions are very pertinent.
    I'll try to give some comments on experience that I've had.
    For every collectPattern BPM instance (which is your case), you'll have a input queue which will receive messages while your correlation is active. So, while you are executing steps inside the block which defines the correlation, then you will also have messages being added to that instance's queue. So, it is extremely sugested that you use local correlations in a Block step and that you only put the loop with the receiving step and relevant container operation steps inside it.
    In the case that some messages are in the queue but was never processed (because the fork or the loop reached an end condition, for example), they are called "Parked messages" and from XI SP 17/PI SP 8 you can even resend them (with a kind of huge delay time, this is a gap from workflow framework...). Check out these notes:
    903139 BPE-RUN: Messages are not processed                   
    901047  BPE-RUN: Local correlations, error in block at runtime
    Briefly, you can minimize the probability of a parked message to occur, but you cannot eliminate it (probability will never reach zero). You can, by setting that particular BPM to a mode "without buffering" (meaning, no input queue), minimize the problem, and all messages which would be parked in "with buffering" mode will now be reprocessed (resent to BPE) but they have a kinda large delay (set in SMQR's Pause parameter for that particular queue).
    To set the BPM for "without buffering" mode, you need to go to tx SWF_INB_CONF and enter the BPM_MODE='X' (the task of the BPM can be checked in SXI_CACHE).
    But please read the notes (and the notes they refer to) before doing any setting. They comment you can't set a particular BPM to "without buffering" if you still have any parked messages for that BPM. You need to check and delete those through report RSWF_XI_UNPROCESSED_MSGS.
    Regards,
    Henrique.

  • SOAP version for B2B HTTP inbound message in SOA Suite 11.1.1.7

    Is there a way to find out the SOAP version supported by B2B HTTP inbound message in SOA Suite 11.1.1.7? Has there been a upgrade of SOAP version to SOAP 1.2?
    The reason behind this assumption is because we are facing following error when an external service posts an XML message enclosed in SOAP envelope (SOAP 1.1) to B2B Sync Receiver Servlet:
    Mime Header Content-Type: text/xml requires SOAP envelope namespace
    Since SOAP headers are already added in the message we are not expecing to face such issue. As per my understanding this issue maybe seen when there is a SOAP version mismatch.
    Moreover, this issue is not seen when this external service posts the same SOAP message to B2B Sync Receiver of SOA suite 11.1.1.6.
    Any help would be highly appreciated.
    Thanks,

    I resolved the issue by myself, The connection factory which I was referring was duplicated. Hence messages were not dequeueing.
    I would be able to found the issues by creating a similar test case scenario.
    Cheers,
    B

Maybe you are looking for