Messaging: wipe out of previous messages

I use iPhone 4S my wife uses 5C both on IOS 8
I typed a text message on my phone to her and went to send it but simultaneously decided to delete it and write another message.
It wiped out our previous conversations on my phone obviously BUT also appears to have wiped out all previous conversations on hers.
the subsequent sent message appears on each phone correctly.
Is this a known bug?
Thanks

the version on both plus the iPad is 8.1.2
thanks

Similar Messages

HT4236 itunes easily synchs the selected picture folders onto the ipad, but it wipes out all previously synched photos. how do i stop that?

itunes easily synchs the selected picture folders onto the ipad, but it wipes out all previously synched photos. how do i stop that?

how to use iTunes to sync is in the
http://www.apple.com/support/itunes
For MacBook Pro community and OS X
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
While it isn't as easy to just use a Mac iDevice as media storage as Android and Windows, you can add documents and such like Word, PDF and others manually in iTunes to have them sync as well.
http://support.apple.com/kb/HT1386
http://support.apple.com/kb/HT1351
They are all there searchable from Bing, Google or every Mac product has a support page.
http://www.apple.com/support/

How can I WIPE OUT a previous installation (without erasing entire volume)?

Like many people (apparently) I had severe problems updating to 10.4.4 (from 10.4.3). I was trying to use a laCie D2 firewire drive as the boot volume. No dice, so I finally reinstalled 10.4.3 on a different drive and have had no problems since.
I would like to recover the disk space on the laCie D2 firewire drive that is being wasted by previous bad installs. However, I don't know exactly what files to delete and I figure there are system files hanging around that are not visible to me, etc. Is there some kind of cleanup utility for this sort of situation or should I just erase the entire volume? This would be kind of a pain as I'd have to reinstall a bunch of apps. What's the safest way to go?
I STILL have not been able to find out why installing 10.4.4 on this Firewire drive turned out so flaky. Disk Util reports absolutely no problems on this drive.
G4 Mac OS X (10.0.x) 10.4.4 crashing firewire LaCie

Hi jd:
I have 10.4.4 on my LaCie and it runs beautifully. You can try using Deinstaller. I have never used it and can't vouch for it. You can select everything you don't want on your drive for deletion. Please be careful as you don't want to delete anything you can't afford to lose.
You can use Carbon Copy Cloner to install the OS you want from your internal HDD> Go into Preferences in CCC and click on the checkbox to Make Bootable, Repair Permissions and Synchronize. Then after you have selected your Sources you can edit the list that shows up deleting items you don't want to clone. It will clone everything you want to your LaCie.
If I may suggest, it might be a good idea to run Repair Disk on your LaCie before the above operations.
Post back with questions or comments.
Good luck.
cornelius
Pismo400, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4) Mac OS X (10.3.9) Beige G3 OS 8.6

Palm pre - when replying to messages - all formatting in previous messages is lost

with the pre - if I reply to an email all the formatting is lost. eg -get an email, I reply to that email, all the people that I reply to lose all formatting when they view the message that I sent in reply - it is like all the hard returns are lost and they see just one string of content.. Do others experience this issue?
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

http://pdfvia.com/showfile-2686/preemailformatting.pdf
Using outlook it happens to me as well. Notice the difference in page 1 & 2 of the pdf
it also doesn't display things correctly on the Pre from outlook. I'll explain in a bit once i get screenshots...
Message Edited by djwhitey on 06-09-2009 09:13 AM

What is the Keyboard Shortcut for Next/Previous Message in Lion Mail?

Using the 'full screen' message viewer (rather than the preview pane) how do I progress to an older/newer message in a folder without closing the window?

MOE O wrote:
So Entourage can go to the previous message? How do you do that?
I can't stand that Mail always goes to the next newest message after deleting.
Every other email program I've ever seen (including Entourage - see below) can do this. Why can't Apple? I don't want to touch the mouse most of the time because it really slows down work to move ones hands back and forth. I did a quick web search and found these shortcuts for all the major programs. If you know of any other program besides Apple Mail that doesn't have this, let me know.
Until then, if Outlook, Outlook Express, Entourage, Sparrow, Postbox, and Thunderbird have had this, what's Apple's problem adding it?
David
Postbox Shortcuts
For our power users, here's a list of Keyboard Shortcuts that you can use to navigate your way through Postbox.
Message Navigation
Mac OS X
Windows
Go Home
Command + Shift + H
Home
Go to Next Message
F
F
Go to Previous Message
B
B
Go to Next Unread Message
N
N
Go to Previous Unread Message
P
P
Go to Next Viewed Message
Go to Previously Viewed Message
Sparrow
Go to previous / next message - cmd-[ / cmd-]
Outlook Express
Go to the next message in the list
CTRL+> or CTRL+SHIFT+>
Go to the previous message in the list
CTRL+< or CTRL+SHIFT+<
View properties of a selected message
ALT+ENTER
Refresh news messages and headers
F5
Go to the next unread e-mail message
CTRL+U
Entourage
Display the previous message
⌘+[
Display the next message
⌘+]
Display the previous unread message
CONTROL+[
Display the next unread message
CONTROL+]
Moving around Thunderbird
⇐ | ⇑ | ⇒
Moving between messages
Go to Next Message
F
Go to Previous Message
B
Go to Next Unread Message
N
Go to Previous Unread Message
P
Go to Next Unread Thread (and mark current thread as read)
T
Go to Next Viewed Message
Go to Previous Viewed Message
outlook 2010:
Switch to next message (with message open).
CTRL+PERIOD
Switch to previous message (with message open).
CTRL+COMMA

Interface Message acknowledge() method acknowledges this and all previous messages received.

Hi,
          I use a JDBC datastore to hold messages in a queue. When I receive a message
          off the queue, there is a flag that says True or False. If True, I want to
          put the message back onto the queue without acknowledge. If False, I want
          to acknowledge. My session instantiation looks like this:
          qsession = qcon.createQueueSession(false,Session.CLIENT_ACKNOWLEDGE);
          Currently, I receive messages by correlation ID in order to filter messages
          based on the flag. First, I receive all messages with False. Those messages
          I will acknowledge. Then, I receive messages with True. This group of
          messages will not be acknowldeged. Instead, I use qsession.recover. The
          messages are put back on the same queue after forwarding them to another
          process. The process will return success or failure. If failure, the
          process will call again, and I'll resend the group of messages I just
          recovered.
          What I would like to have happen is to do this procedure in one loop, not
          two. Instead, I would rather get all messages, and check if True or False.
          If True, I would want to skip acknowledgement. If False, I would want to
          acknowledge. The problem is, the JMS Message.acknowledge method will
          acknowledge all the messages it received before.
          In BEA WebLogic, is there an ability to acknowledge a particular message,
          rather than all previous messages? If it is not possible, is the reason
          because the acknowledge underneath is actually like a database commit? Is
          there any other way to process these two types of messages given that I may
          need to keep one type around in case resending is necessary?
          Regards,
          Scott Lynch


          Scott Lynch wrote:
          > Hi,
          >
          > I use a JDBC datastore to hold messages in a queue. When I receive a message
          > off the queue, there is a flag that says True or False. If True, I want to
          > put the message back onto the queue without acknowledge. If False, I want
          > to acknowledge. My session instantiation looks like this:
          >
          >
          >
          > qsession = qcon.createQueueSession(false,Session.CLIENT_ACKNOWLEDGE);
          >
          >
          >
          > Currently, I receive messages by correlation ID in order to filter messages
          > based on the flag. First, I receive all messages with False. Those messages
          > I will acknowledge. Then, I receive messages with True. This group of
          > messages will not be acknowldeged. Instead, I use qsession.recover. The
          > messages are put back on the same queue after forwarding them to another
          > process. The process will return success or failure. If failure, the
          > process will call again, and I'll resend the group of messages I just
          > recovered.
          >
          > What I would like to have happen is to do this procedure in one loop, not
          > two. Instead, I would rather get all messages, and check if True or False.
          > If True, I would want to skip acknowledgement. If False, I would want to
          > acknowledge. The problem is, the JMS Message.acknowledge method will
          > acknowledge all the messages it received before.
          >
          >
          >
          > In BEA WebLogic, is there an ability to acknowledge a particular message,
          > rather than all previous messages?
          The is a FAQ. And no, BEA does not provide an "acknowledge-one"
          extension. It does provide an "acknowledge-previous" extension, via a
          connection factory configurable, but this won't help in your case.
          One common solution is to use a pool of multiple sessions (one per
          current message).
          > If it is not possible, is the reason
          > because the acknowledge underneath is actually like a database commit?
          No. BEA JMS is just following the JMS spec here.
          > Is
          > there any other way to process these two types of messages given that I may
          > need to keep one type around in case resending is necessary?
          Use multiple sessions.
          >
          >
          >
          > Regards,
          >
          > Scott Lynch
          >
          >
          >
          >

Each new beta seems to wipe out the tab groups defined in previous versions. Why?

Why does each version of the Firefox v.10 beta wipe out the previous beta's tab groups? Is there a way to recover them? I've had to stop using the groups feature lest I lose the tabs not included in the primary group.

-> [[Session Restore]]
Check and tell if its working.
Not related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

BB 8830 - Email Message notification but can find message

Hi All, My 8830 is always showing I have 1 unread email message and I can't find out where it is. I don't have any hidden files and I've searched all my folders on my device. So my message indicator is always showing 1 message, plus I get the envelope icon indicator at the top of my device. Does anyone know who to help?? Thanks@=! Kris
Solved!
Go to Solution.

Hi,
The email database on the Blackberry is corrupted and has not flagged the email database as read.
As such you need to wipe out your entire message database and start again.
You can back up the handset and database. Hopefully if you restore the handset it will correctly mark the emails as read, or show you the unread email.
If it still has the same error, then you'll have no choice but to wipe the entire database and start again.
Follow this KB:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB10167&slic...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

JMS / Message Driven Bean not processing message

I am having a problem getting an MDB to work on Weblogic Server 7x.
          Basically I have written a simple Bean which simply prints a message.
          I have a JMS client which creates a message (javax.jms.TextMessage)
          and successfully adds it to the queue (javax.jms.Queue). The code
          looks as follows:
          public void sendText(String message) throws Exception
          TextMessage textMessage = getQueueSession().createTextMessage();
          System.out.println("Created Message: "+message);
          textMessage.clearBody();
          textMessage.setText(message);
          System.out.println("Sending Message");
          getQueueSender().send(textMessage);
          System.out.println("Sent Message");
          The message is getting onto the queue as we can monitor this from the
          weblogic console, everytime we run the JMS Test client the number of
          messages on the queue increases however these message never seem to be
          processed. Here is a sample of the ejb-jar.xml
          <message-driven>
          <display-name>JMSBatchReceiver</display-name>
          <ejb-name>JMSBatchReceiver</ejb-name>
          <ejb-class>com.batch.JMSBatchReceiverBean</ejb-class>
          <transaction-type>Container</transaction-type>
          <message-driven-destination>
          <destination-type>javax.jms.Queue</destination-type>
          </message-driven-destination>
          </message-driven>
          Here is a sample from the weblogic-ejb-jar.xml
          <weblogic-enterprise-bean>
          <ejb-name>JMSBatchReceiver</ejb-name>
          <message-driven-descriptor>
          <pool>
          <max-beans-in-free-pool>5</max-beans-in-free-pool>
          </pool>
          <destination-jndi-name>jms/BatchQueue</destination-jndi-name>
          <connection-factory-jndi-name>jms/BatchQueueConnectionFactory</connection-factory-jndi-name>
          </message-driven-descriptor>
          </weblogic-enterprise-bean>
          And here is an excerpt from the config.xml;
          <JMSConnectionFactory JNDIName="jms/BatchQueueConnectionFactory"
          Name="jms/BatchQueueConnectionFactory" Targets="myserver"/>
          <JMSServer Name="JMSBatchServer" Targets="myserver">
          <JMSQueue DeliveryModeOverride="Persistent"
          JNDIName="jms/BatchQueue" Name="jms/BatchQueue"/>
          </JMSServer>
          Any ideas.....
          Best Regards
          Brian


Check the UserTransactions and XATransactions checkbox for your custom connection factory.
          Tom Barnes wrote:
          > Confirm that the bean is deployed by checking the server's
          > deployments on the console.
          >
          > Check your server log for messages. If the MDB is failing to
          > attach, it will log errors and warnings.
          >
          > I wonder if the "/" in your descriptor jars is messing things
          > up as a special character? Try naming your JNDI resources
          > without slashes.
          >
          > Note that there is no need to specify a connection factory for
          > MDBs - the default one is usually fine.
          >
          > Tom
          >
          > Brian Seery wrote:
          > > I am having a problem getting an MDB to work on Weblogic Server 7x.
          > > Basically I have written a simple Bean which simply prints a message.
          > > I have a JMS client which creates a message (javax.jms.TextMessage)
          > > and successfully adds it to the queue (javax.jms.Queue). The code
          > > looks as follows:
          > >
          > > public void sendText(String message) throws Exception
          > > {
          > > TextMessage textMessage = getQueueSession().createTextMessage();
          > > System.out.println("Created Message: "+message);
          > > textMessage.clearBody();
          > > textMessage.setText(message);
          > > System.out.println("Sending Message");
          > > getQueueSender().send(textMessage);
          > > System.out.println("Sent Message");
          > > }
          > >
          > > The message is getting onto the queue as we can monitor this from the
          > > weblogic console, everytime we run the JMS Test client the number of
          > > messages on the queue increases however these message never seem to be
          > > processed. Here is a sample of the ejb-jar.xml
          > >
          > > <message-driven>
          > > <display-name>JMSBatchReceiver</display-name>
          > > <ejb-name>JMSBatchReceiver</ejb-name>
          > > <ejb-class>com.batch.JMSBatchReceiverBean</ejb-class>
          > > <transaction-type>Container</transaction-type>
          > > <message-driven-destination>
          > > <destination-type>javax.jms.Queue</destination-type>
          > > </message-driven-destination>
          > > </message-driven>
          > >
          > > Here is a sample from the weblogic-ejb-jar.xml
          > >
          > > <weblogic-enterprise-bean>
          > > <ejb-name>JMSBatchReceiver</ejb-name>
          > > <message-driven-descriptor>
          > > <pool>
          > > <max-beans-in-free-pool>5</max-beans-in-free-pool>
          > > </pool>
          > > <destination-jndi-name>jms/BatchQueue</destination-jndi-name>
          > > <connection-factory-jndi-name>jms/BatchQueueConnectionFactory</connection-factory-jndi-name>
          > > </message-driven-descriptor>
          > > </weblogic-enterprise-bean>
          > >
          > > And here is an excerpt from the config.xml;
          > > <JMSConnectionFactory JNDIName="jms/BatchQueueConnectionFactory"
          > > Name="jms/BatchQueueConnectionFactory" Targets="myserver"/>
          > > <JMSServer Name="JMSBatchServer" Targets="myserver">
          > > <JMSQueue DeliveryModeOverride="Persistent"
          > > JNDIName="jms/BatchQueue" Name="jms/BatchQueue"/>
          > > </JMSServer>
          > >
          > > Any ideas.....
          > >
          > > Best Regards
          > >
          > > Brian
          Rajesh Mirchandani
          Developer Relations Engineer
          BEA Support

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I need to know all the questions below. I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone. the message is that it is synced to another library and it could wipe out my data on the ipad.

I need to know all the questions below. I had to restore my computer to original state and now even if I sign on it won't let me sync my ipad or iphone. the message is that it is synced to another library and it could wipe out my data on the ipad. Am I understanding correctly? I am running Windows 7 but have never had any problems. Thanks

You need iTunes on the computer. There is no iTunes for your phone. See:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

How do i wipe out my IPHONE AND turn off I MESSAGE

I need to turn off Imessage and wipe out my Iphone?

Hi Karley27,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more information:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
If you still have your iOS device
Before you sell or give away your iOS device, make sure that you've removed all of your personal information. Follow these steps to protect your data and get your device to its factory default state for the new owner:
Back up your device.
Go to Settings > General > Reset, then tap Erase All Content and Settings.
This will completely erase your device and turn off iCloud, iMessage, FaceTime, Game Center, and other services.
If you're using iOS 7 and have Find My iPhone turned on, your Apple ID and password will be required. After you provide your password, the device will be erased and removed from your account so that the next owner can activate it.
Contact your carrier for guidance on transferring service to the new owner.
When the device is turned on for the first time by the new owner, Setup Assistant will guide them through the setup process.
Important: Do not manually delete contacts, calendars, reminders, documents, photo streams, or any other iCloud data while signed in to your iCloud account, or the content will also be deleted from the iCloud servers and all of your iCloud devices.
Cheers,
- Judy

Print out of text message history!

Hey guys,
Does anyone know how i can get a print out of my entire text message history for one conversation on my iphone 4. I know it is in the phone because i can view it bit by bit if i continue to scroll and hit "view previous messages" but i am in the middle of a legal thing and i desperately need a print out of the history of this one conversation. There has to be a computer genius out there than can help me. There must be a way to export it to my macbook or my email or something. Please if you know anything i would be so grateful. Thank you!

Two Methods:
1. You can put the text messages on your screen like your reading it.. press the lock button and the home button at the same time.. it will take a picture of it and be saved to your photo album.. then upload it to your computer or email it to yourself..it won't be a document but it will be a picture and that's something.
2. use iPhone backp extractor app:
First backup your iPhone to your computer with iTunes, all text messages, contacts will be included in the backp file, but it is an unreadable format, you have to extract them to your computer for print.
Vibosoft iPhone message extract:
How to Print Messages Conversation from iPhone with Dates & Times
iStonsoft iPhone SMS recovery
How to Print out iPhone text messages
and more...

Out of memory message in the audio window

i finally updated my studio software from logic6 whilst still using the protools HD 192 interface.
i updated the OS to leopard and installed logic 7 and updated the software for everything.(atmosphere,bfd,stylus,autotune etc).
not only did many of the apps not work (after downloading all their relevant updates)but when i recorded audio no waveform appeared.
however reloading the session DID make the waveform reappear.
in the audio window the audio file had no location but a message saying 'out of memory'.
hitting 'refresh overview' after recording helped but ultimately does not fix the issue.(also the system stutters when 'dropping in'on a recording)
i then bought the logic 8 upgrade hoping it would magically resolve the issue and..same problem.grrr.
protools 8 ,on the other hand,works like a dream.(additionally all the apps mentioned above work smoothly too).
what am i missing?

my friend figured the 'out of memory' problem was caused by running protools' latest version on the same drive as both logic 7 and logic 8.
he de-installed protools and re-installed and previous older protools version and the 'out of memory' issue (plus no visible waveform) in logic 7 and 8 was corrected.
do apple and digidesign grow ever further apart or is it a question of catch up for one or both?

In deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

in deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Messaging: wipe out of previous messages

Similar Messages

Maybe you are looking for