Messed with multiple Domains... Big Problems

I have posted on this topic because I was experiencing very slow save times and publishing times.
I had 20+ sites created in iWeb, many of which have large photo galleries.
Wanting to solve this problem, I tried a couple of techniques to start with a fresh Domain.
I tried duplicating the existing Domain and deleting the sites I didnt want in Domain 2.
Problem was this retained the massive "Albums" folder within iWeb package content.
The sites didnt show in the iWeb interface but the new Domain was giant (1.9 gigs) and saving and publishing still took forever.
So I went into the Domain 2 package contents and deleted the Albums for the sites I didnt want in my new Domain.
Well then Domain saved and published nice and fast as I expected it to.
Thing is...
Now all of my previous sites from the old Domain are broken when you attempt to view them on the web.
They all look fine when I look at them in iWeb by opening their files in iWeb.
My original Domain is still intact where I have stored it on my computer.
When I check my iDisk, I can see that my old websites are there but their Media folders are completely empty.
Sooo... how do I fix this situation?
I realize I brought this upon myself but I was trying to do what I have got to believe is doable.
I want to have multiple Domains so I can work more efficiently.
Surely I dont have to be saddled with updating a 1.9 gig Domain every time I publish to iWeb.

You're only putting the domain file(s) in the trash to prevent iWeb opening them so that it will be forced to created a new blank domain file. Then drag it out and store it in a folder.
Individual domain files are opened in Iweb by double clicking them.
Splitting domain files with multiple sites is not recommended. You're only leaving yourself open to file corruption and other problems some where down the line.
Start each new site on a blank domain file and store it in its own folder.

Similar Messages

More problems with multiple domains and subaccounts

I had been creating multiple .mac web sites in earlier versions of IWeb by creating extra “domain” files and dragging them in and out of the folder library/Application Support/IWeb as needed. Now I notice that IWeb 08 lets me store several domain files with different names in a folder, and pick whichever one I want when launching IWeb. That’s good -- but of course, the IWeb “Publish” command wants to publish them all to my same .dot mac web site -- even though I have four .dot mac subaccounts each of which can have its own web site. The only way I could figure out to publish different domain files to different .mac web sites was to create several different user accounts on my computer, assign each one to a different .mac subaccount, launch IWeb, find the domain file for that account, publish it -- then log out, log in to another account, launch IWeb there and do the whole exercise again.
It would be bad enough if that worked, but it doesn’t: I found that when I logged in to an account other than the one that created a given domain file, I could open that file (I’ve got it stored in a folder on root level of my hard drive), but I couldn’t save it -- I would get the error message: “Couldn’t save file. You don’t have permission to make changes to that file.” So OK, I went into “Get Info” and changed the ownernship/permissions to match the user account I was in. Now I can make changes and save my domain file -- but I can’t publish what I just saved. When I try, to get the message: “Publish Error. An unknown error occurred.”
Is there any way I make this all work -- to open and save my domain files and publish them to the .dot mac subaccount/web site I want? And is there any way around this whole clunky system that would allow me to publish to different .mac subaccounts/websites more efficiently (preferably logged into my Mac from the same user account)?
(It may be irrelevant, but in addition to paying for the subaccounts, I bought the family pack version of ILife what should give me legit access from a licensing point of view anyway.)

That's helpful -- I'll try it. It seems to me it would still be preferable to store my multiple domain files in one hard drive location, easily accessible and offering read and write privileges to any user account. That way I could at least do design work, etc., on any of my domains without logging in and out as various users. Any way to make that work? And really, it seems weird that I can sit at my Mac and mount the IDisks of any of my four .mac sub accounts, open their folders, and look at the web pages previously published to those subaccounts -- but apparently I can't publish any changes to those subaccounts/domains through IWeb without logging out and then back in as a different user. Isn't there some way around these apparent restrictions?

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to confiture virtual hosts with multiple domain names

hello,
I've read through some of the postings here on virtual hosts, but I thought I'd better solicit advice before I actually try some of the things I've read about.
In a nutshell, I've purchased multiple domain names that I'd like to alias to a new site (currently it is just a subfolder in the main site directory) on my OS 10.3.x server. There is only the one main site configured right now on the box, so I know I need to set up a second "virtual site" pointing to the files in this subfolder to make it function as its own site.
I've dabbled around with the sites settings in the GUI, but I'd probably be most comfortable setting all this up in the httpd.conf by hand if I could. But I'm weary of this because I know it might be better to use the GUI because of OS X Server's flavor of WebObjects and Apache (sigh).
So, I have two main questions:
1) How would I set up this second site using the GUI in server settings? Do I need to first move the subfolder out of the main folder before it can be designated its own site? Or can I just point to it in the GUI? Can I use one of my purchased domain names in the domain field?
2) Currently, I have URL Forwarding set with my multiple domain names, but I'm thinking there might be a better way to do this? For SEO I'd rather use some type of redirect rather than being penalized by search engines for having what looks to be multiple domains pointing to the same site.I'm thinking I should create virtual sites for each domain name I've purchased with a hard redirect back to the main site?
Any suggestions would be appreciated.
Thanks
G4 Mac OS X (10.3.9) 10.3.9 Server
G4 Mac OS X (10.3.9) 10.3.9 Server

thank you for your reply.
> You can create each site as a new Site in Server
Admin. When you do this you can choose any
directory on disk as the document root for each
site.This means you can move the sites' folders out of
/Library/WebServer/Documents if you like - you could
create /Library/WebServer/site1,
/Library/WebServer/site2, etc. (or even be outside of
/Library/WebServer if you want).
so, are you are saying that I could designate one site to be
/Library/WebServer/Documents/site1
and another to be
/Library/WebServer/Documents/site1/directory1
even though directory1 is contained within site1's structure? I'm not advancing this as a good idea, necessarily. I'm just wondering if Apache would complain.
> Each site should have the domain name set as per your
registered domains. Apache will need this to
determine the correct site to serve for each
request.
Well, after some additional research I'm thinking I'm missing a critical piece of the puzzle. That being access to the DNS host server that manages the context of my server. I have purchased domain names through an outside registrar that point to my site and I can create virtual hosts on my server, but I don't have the ability to add the new virtual host names into the DNS server that manages my box. If that makes sense. Or maybe I'm missing something?
>
I'm not sure why you're using URL forwarding at all.
Without that piece of information it's impossible to
tell you whether you should continue using them or
not - in general there's no need to use URL
forwarding if you have multiple Virtual Hosts setup,
but it sounds like you have multiple hostnames
pointing to the same content, so your needs may be
different.
I'm using forwarding for the reason I list above. I didn't purchase hosting with the registrar where I purchased my domain names, so they are parked on the registrar's name server with URL forwarding to my server. The DNS server that manages my box resides in a different location and I don't have the ability to add DNS entries pointing to virtual hosts that I want to set up. Am I stuck?
G4 Mac OS X (10.3.9) 10.3.9 Server

CCM / AD intigration with Multiple domains

Our corporation is made up of two different active directory domains. Is it possible to integrate call manager with both domains?

If they are in the same forest, yes you can. Take a look at the following link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_2/srnd4_2/uc4_2/42drctry.htm#wp1067012
There are definitely some added complexities and considerations in this sceario. Take a look at the following note from the previous link:
"In a multiple-domain AD forest, try to keep the users for a specific Cisco Unified CallManager cluster within a single domain, and follow the guidelines described previously. If a single domain is not possible because users are spread across multiple domains, set the User Search Base to the lowest point in the tree containing all domains with users serviced by the Cisco Unified CallManager cluster. In structures in which serviced child domains are under the top-level domain, the User Search Base must be set at the root of the entire AD forest. In all cases, though, try to ensure that a domain controller for each serviced domain is collocated with Cisco Unified CallManager, or that the network is sufficiently resilient and fast to allow remote searches with no greater performance degradation than occurs with local searches."
Hope this helps. If so, please rate the post.
Brandon

Office 365 tenant with multiple domains - What does Azure AD backend look like?

I'm planning a full cloud deployment of multiple services. I have a few domains I'll be using for email. My question is simple. If I create an office365 tenant, add 3 domains, and then go to AzureAD, do I have 3 Azure AD instances or a single directory?
I'm planning on leveraging Visual Studio Online, but it doesn't play nice with multiple Azure AD domains so I need to make sure I get this right.

you can do both. But normally you will use one azue ad, with all the suffixes in it. But you could create a Azure AD for every domain.
www.sccmfaq.ch

Announcing the availability of enabling Windows Server 2012 R2 Essentials' integration of Microsoft online services in environments with multiple domain controllers

In Windows Server Essentials 2012 R2, all of our online services integration features, including Azure Active Directory and Office 365, are supported only in environments that
have a single domain controller. In environments with more than one domain controller, integration of these services is blocked due limitations in the user account and password synchronization mechanism in Windows Server Essentials.
I am happy to announce that with the recent Windows August Update released on (8/12/2014, PST), this limitation has been removed. This update adds support for both Azure
Active Directory integration and Office 365 integration features in domain environments consisting of a single domain controller, multiple domain controllers, or Windows Server Essentials as a domain member server.
For more information, please go to
http://support.microsoft.com/kb/2974308

Hi JoeBeck,
Thanks for the comment. Could you please tell which link you clicked to download?
Please go to PinPoint check details and start download
http://pinpoint.microsoft.com/en-US/applications/Dynamics-CRM-Online-Add-in-12884966386
Thanks,
Shanghai Wicresoft

Essentials 2012 R2 Exchange Integration with Multiple Domain Controllers

Attempting to integrate Exchange Server 2012 with the Essentials wizard results in the error message: "This task must be performed on the domain controller." I've found several threads that speculate this is because there are multiple domain controllers
in the domain. Is there a workaround or patch available to resolve this issue? Why wouldn't Microsoft want the redundancy of multiple DCs?
Thanks.

Hi HartmannTek,
I agree with Robert.
We can get the following information from the article:
Services Integration Overview for Windows Server 2012 R2 Essentials - Part 1. Please refer to.
Currently, the Services Integration features, including Windows Azure Active Directory integration, Office
365 integration, Windows Intune integration, and on-premises Exchange integration, are only supported in a single domain controller environment. In addition, the integration wizard must be run on a domain controller.
Hope this helps.
Best regards,
Justin Gu

Smart form problem with multiple pages & table problem

Hi experts,
I have a problem with my smart form with multiple pages
Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
Regards,
PJ

I would suggest another approach to this problem.
Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
The table should flow as you would be using the Main window for this one.
As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
Hope this resolves your problem.
Regards,
Ancy
Edited by: abapfreak on Oct 4, 2010 11:52 AM

Limti PO with Multiple account assignment Problem

Hi,
Can we create limit PO with Multiple account assignment.
If yes, i have issue with commitment distribution for all the account assignment. when i post service entry sheet the value is posting for only first one cost centre/Order but not all.
So in the purchase order for the remaining account assignment commitment remain left.
Reagrds,
JM

Hi Summer,
We have implemented SAP Note 1165524 for multiple account assignment as suggested, and it is working fine for New POs.
But we have old Purchase order which still have wrong commitment, and GR and IR are already posted for this PO, we have to reduce the commitment to Zero.
there is one solution for this is set 'No further Invoice expected' check box selected in this PO, but in our case PO went into error in process after doing this.
Please help me to reduce commitment to zero for this old PO
Thanks in advance
Vikas

Help Working With Multiple Domains

I have created multiple domains. I can send mail from all users on all domains but I can only receive mail on some domains. All the anti spam settings are the same for each domain in the enterprise manager smtp_in and smtp_out and on the mail client administration tab of the web client. The mx records are setup exactly the same for dns. When sending from yahoo the following error message is returned.
<[email protected]>:
216.198.xx.xx does not like recipient.
Remote host said: 550 Spam check failed for recipient's address:
[email protected]
Giving up on 216.198.0.0.
Any ideas?

Thanks for the Reply Steven..
I'll go deeper just so I understand.
Lets say I have 2 separate matte shapes: a circle and a triangle....that will be used to cut out 2 different layers of video.
I want to position the triangle in the right side of frame. The video I want to be revealed in that matte position will be placed on v1....the matte on v2.
- I have to take the opacity down on the matte so I can see where to repo my video underneath so that I can chose what portion is seen in the triangle.
- Then nest the matte and video "fill"...essentially building a precomp
- Turn off the matte in the nest
- Cut the Nested Seq into my Main Seq
- Then copy the matte out of my nested seq to keep position intact, and paste that matte into my main seq...in this case on v2
- Bring Matte opacity back up to full
- Add Track Matte FX to v1
- In Track Matte FX settings...chose v2 for matte
Now I have the video in v1 being revealed thru the matte on v2. If for any reason I wish to adjust the repo of video on v1...I must go back into the nest.
To continue and add the Circle shape cutout...I place the video "Fill" on v3 and the circle matte on v4 and repeat above steps.
Is this the correct procedure?

Problem Queries on tables with multiple domain indexes

I recently came across an issue in which the development team added a second context index to a table; that is, there was a context index on "title", and a second one was created on "summary".
Text queries on the new index do not always return results -- In one example, I get 77 rows querying the title, and 5 querying the summary (which, for the purposes of this explanation, always includes the title).
e.g. contains (title,'matha',1)>0 --> 77 rows
contains (summary,'martha',1)>0 -->5 rows
Inspection of the tokenlists shows that the correct pkeys are associated with the expected tokens, and the index is up to date.
So -- when I was asked to take a look at this, I vaguely recalled some issues with this functionality -- but I can't find any reference to this. The closest thing I could find was reports of problems when multiple contains clauses exist within the same query -- and that is not what is happening here.
What I would like to do is recommend moving to a single index with a multi-column datastore, and some reference to a bug # would make the process much faster.
Does anyone recall this issue?
DB Version 9.2.0.7
Sun Solaris 10

e.g. contains (title,'matha',1)>0 --> 77 rows
contains (summary,'martha',1)>0 -->5 rowsYou have searched for 'matha' without an 'r' in your first example and 'martha' with an 'r' in your second example. I don't know if this was just a typo in your post or if that could be the problem. If it is not the problem, can you post a reproducible test case or at least a copy and paste of an actual run of the two queries using the two contains clauses and the results of the count(token_text) for the search value from the dr$...$i domain index tables. I recall problems with two contains clauses in one query using an 'or' condition, but not with just one contains query where two context indexes exist.

Problems with multiple Domains open in same web browser?

Here is the problem.
I login to one domain and then open a new webpage (same browser) and login
to a 2nd domain. I can then navigate in both domains in each web page.
However, when I logout of one, it logs me out of both and which ever one
that I logged out of is the logout/login page that I see for both web pages.
The same thing happens if I try to login to 2 different domains at the same
time. One will override the other and I end up with the same domain open in
both browsers.
I am pretty sure that this has to do with the cookie, since it is probably
using the same one for both and then getting confused. Does anyone know how
to fix this?
Portal Server: IPS 3.0 SP2
Web Server: IWS 4.1 SP8

Brian Orwig wrote:
Here is the problem.
I login to one domain and then open a new webpage (same browser) and login
to a 2nd domain. I can then navigate in both domains in each web page.
However, when I logout of one, it logs me out of both and which ever one
that I logged out of is the logout/login page that I see for both web pages.
The same thing happens if I try to login to 2 different domains at the same
time. One will override the other and I end up with the same domain open in
both browsers.
I am pretty sure that this has to do with the cookie, since it is probably
using the same one for both and then getting confused. Does anyone know how
to fix this?The way the cookies are set for the current authentication are it is based on
the portal domain/dns domains and the client ipaddress.
When a user logs in a random session id is generated, and then once he
authenticates the session id is made valid and is added into the session hash
table.
So to answer your question you can do what your trying to do if you are using
two browsers but in the current architecture and the way sessions are handled it
is not possible if your using just one browser ..
iWS Sp8 is not certified to run with portal and the web server that is shipped
with should not be updated seperately, in the past doing that has broken portal
>
>
Portal Server: IPS 3.0 SP2
Web Server: IWS 4.1 SP8

Exchange 2010SP1 Multi-Tenant Issue with Multiple Domains

I have an installation of Exchange 2010 SP1 with multi-tenant support enabled via the install time /hosting switch.
Everything works well for my smaller clients. I now have a bigger client that has about 300 users and 3 domains. The users are divided roughly equally amongst the domains - ie, 3 domains each with 100 users. I've added the first domain as normal:
$c = get-credential
New-organization -name "Pretend Company" -DomainName domain1.com -ProgramId HostingSample -OfferId 2 -location en-US -AdministratorPassword $c.password
After that I logged into the ECP control panel and created all the users. The migration went smoothly and has been working well for the last week. Now, it's time to add the next domain. Since the client wants all 300 users visible in the same GAL, I just
added a domain to the organization:
New-AcceptedDomain -Name domain2.com -DomainName domain2.com -Organization "Pretend Company"
This is where I run into problems. When I try to create the users for domain2.com via ECP, I am able to create the user successfully, and select domain2.com from the drop down. Once the user is created however, I am able to see that although their UPN
is [email protected], it created their email address as [email protected].
I tried creating the users manually via EMS:
$password = Read-Host "Enter password" -AsSecureString
New-MailUser -UserPrincipalName [email protected] -Password $password -Name "Test User" -Organization "Pretent Company" -PrimarySmtpAddress [email protected]
The user creates successfully and I can see the user created in the proper OU in AD. Unfortunately I can not see them in ECP nor can I see them if I do:
get-mailbox -Organization "Pretend Company"
This makes the management of the users very difficult to delegate, and I'm not sure that the users at domain2.com will even work.
This brings me to my questions:
(1) Is is possible create accounts that have different domain names in their default email addresses within the same Organization in /hosting mode?
(2) Is this something I need to do with an EmailAddressPolicy? I read the documentation but it didn't seem /hosting friendly.

Hi Earonk,
Please post your issue on below forum, you will get more help from there:
http://social.technet.microsoft.com/Forums/en-us/exchange2010hosters/threads
Regards!
Gavin

Itunes/Ipod with multiple Vista users - Problem

To set the stage - new Vista PC, shared by the family - so I set up individual ID's (thought that would prevent my kids from corrupting our stuff). Oh, and thought Vista was compatible.........
On the admin account, which is where the iTunes Library is linked, it sees my iPod but says it is in the process of "recovery" - even after accomplishing the restore process - this message comes up right away. But, lo and behold, on my daughter's ID, the iPod is recognized sucessfully (and what is weird is that iTunes wasn't even installed on her account (i had to go through the Q&A process) but the iPod was seen just fine. I can sync the iPod to her library, but even after exiting nicely, and logging off her ID, when I go to mine (admin), I get the same message/problem.
Any hints/help?

if still does not solve try this
. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

Messed with multiple Domains... Big Problems

Similar Messages

Maybe you are looking for