Messenger 3.0 and updating vs. migrating

We are a small shop (70 users) and currently have Messenger 2.2 running on our GroupWise (GW 2014 sp1 running on virtualized OES 11 sp2) server. With the release ov Messenger 3.0 and the advent of the messenger mobile clients, we will probably want Messenger accessible from outside the corporate network.
I have a series of questions:
1. Would it be better to migrate to a new server /VM?
2. Will there be any port conflicts between webaccess and Messenger?
3. What ports will need to be opened in the firewall for external mobile clients to access the messenger server?
Thanks in advance!

DanPearson wrote:
>
> We're about the same setup and have GW 2014 and Messenger running on the
> same server. It doesn't really take a lot of resources for our size shop
> as long as you have a decent hardware running it. I believe the only
> port required for Messenger to be passed through the firewall is 8300.
> There isn't any conflict between web mail and Messenger, they use
> different ports.
>
> The upgrade to 3.0 was a bit of an adventure though. First the
> upgrade.sh script kept bombing out so we had the files copied over but
> the settings weren't completely updating. The text display of the script
> wasn't showing correctly so I wasn't getting some of the eDirectory
> objects entered correctly. Then there were issues with it running as a
> local user. We had to copy all the files from our nss volume to a local
> folder and reconfigure everything. It's working fine now but it took a
> couple days to get everything ironed out.
>
> Dan Pearson
>
>
I have just did an upgrade that the services were running in a clustered
solution. The install was not smart enough to pick that up. Had to copy the
config files from the nss volume to the /etc path that it wanted. Than the
agents did start and all was well. It seemed so much cleaner for the install
with 2.x and especially upgrades. Its not the end of the world if the conf
file needs to be local on the servers but not the ideal solution for
clustering when it comes time to make changes

Similar Messages

  • Calling stored procedure inside AM. DB connection and updates on act/passiv

    Hi Experts,
    Currently in my application we have view objects and also we have some stored procedure calls to insert and update data (in the procedure we don't commit it. Due to the volume and complexity we couldn't migrate all the procedures). After the stored procedure call we do refresh the VO (Also in the EO we have checked necessary attributes to refresh on update and insert) to pick up the changes that happened in the stored procedure call. It is working fine and i can be able to see the updated values in the VO after the procedure call. However
    Now my question is what will happen on activation and passivation? In the passivation the pinned DB connection is released and used for another AM. Will the stored changes will be rolled back. I mean the DB transaction. If rollback then the VO updates based on the procedure call will be also rolled back? I have tested this behaviour after disabled the AM pooling and set the pool size to 1. It is working but failing some times (In the procedure i have data insert for the child table, after the refresh i could be able to see the child VOs, some times empty child). Did anyone try this approach before?
    Also what will happen if AM goes to passivation during the stored procedure executing ( i am getting the DB connection from getDBTransaction(() method). When i was testing i got the resultset null and i checked the stack and it was due to the connection closed). If AM behaves it like that is it reliable to use procedure call inside the AM?
    Looking forward you expertise answers.
    Thanks

    Hi,
    I agree with Frank.
    In our application we always commit after calling PL/SQL procedures which performs DML-Statements (insert, update, delete).
    Without commits you will - beside the passivation problem - face problems with locked records in the database.
    To refresh the values from DB we use the "restore current row after rollback" approach (which is applicable for commit too).
    regards
    Peter

  • Web Galleries and overall image migration

    Hey all,
    I've got a question regarding the MobileMe web galleries. I'm pretty sure that you can create them in three places; Aperture, iPhoto and iWeb. So my question is kind of relating to two methods of creating and collaborating web galleries.
    Say that you've created a web gallery in iPhoto in a pinch but use Aperture primarily. Now you're on Aperture and want to continue to update that gallery. Is there a way to migrate that gallery from iPhoto to Aperture. Or, and this is my situation more specifically, say you're on vacation and create an Aperture based web gallery on your Macbook. Now you're back home and want to continue using and updating that web gallery but are now on the Mac Pro. Can that gallery be migrated from the Aperture database on the Macbook over to the database on the Mac Pro?
    To that point, how about image alterations and settings. I've captured some 1200 photos while on vacation, tooled around with them on my Macbook while away making color adjustments, adding vignettes and general improvements. Is there any way to then migrate those albums and/or settings over to the other database in the other system? Seems a shame to have to do all that leg work all over again. Perhaps it's just a matter of grabbing album folders from the database package and bringing them into the other database package?

    "Migrating" your photos, albums, adjustments, etc. is a piece of cake. Just export the project/s using file export project from your laptop and use file import project on your desktop. Move or share the .approj file from your laptop to desktop in the way you are most comfortable with.
    More info here:
    [Aperture on multiple computers|http://photo.rwboyer.com/2008/09/managing-aperture-2-on-multiple-comp uters>
    As for web galleries - can't answer that one with detail because I find them uselessly frustratingly unexplainably notoriously unreliable and I hate that you have no control over color profile for downloadable images. So I don't use them now after playing with them for a bit.
    RB

  • Update Rule Migration from ODS to Cube --Error

    Hello SAP Experts,
    I am triing to migrate Update Rule (from 3.x to 7.0 transformation) from DSO 0QM_DS01 to Cube 0QM_C12 and i am getting error.
    Error message:
    Internal error: 32 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    Similary with another update rule migration from DSO 0QM_DS02 to Cube 0QM_C13 .
    Error message:
    Internal error: 41 0NOTIFICATN 01 Standard Group MASTER - Contact SAP.
    I dont have any clue about the error message. Need your help to figure it out the issue.
    Thanks in Advance.
    Lasya.

    MR..V.. you are the man... my problem has been solved.
    Anyway my problem has been solved.. do you mind asking one more question regarding the above error?? how did you think about the above solution.. just changing it from read master data --> direct assingmen then back to read master data.. Please tell if i come accorss anything in future shall i follow the same.. please tell me..
    I have assigned full points to you.
    Thanks for all your help.
    Lasya.

  • Using time machine, multiple computers back- up and update

    hi all,
    to start off, i'm planning to buy a new iMac in the Q1 2009... the comming update, and i'm wondering:
    whit time machine, is it possible to let's say back up my macbook.
    and whit the new iMac update from the backup so my iMac is in sync whit the macbook?
    and when i add, change or kill a file, time machine update's this in the backup, and my macbook will notice this and update the macbook of the backup the iMac changed?
    hard question, hope somebody out there can help me by answering or refering me,
    cause i realy want this to be true, gheghe!
    Kind regards,
    Lennart.
    Message was edited by: Lennart Hendriksma

    Lennart Hendriksma wrote:
    hi all,
    to start off, i'm planning to buy a new iMac in the Q1 2009... the comming update, and i'm wondering:
    whit time machine, is it possible to let's say back up my macbook.
    and whit the new iMac update from the backup so my iMac is in sync whit the macbook?
    you can use use Migration Assistant to migrate your settings and data from the TM backup of the macbook to the new imac. you'll also have an option to do it during the initial computer setup.
    This is a one time operation. You can not use Time Machine to keep computers synced after that. each computer has its own TM backup and they don't interact with each other.
    and when i add, change or kill a file, time machine update's this in the backup, and my macbook will notice this and update the macbook of the backup the iMac changed?
    sorry, I don't understand what you are asking. please rephrase.
    hard question, hope somebody out there can help me by answering or refering me,
    cause i realy want this to be true, gheghe!
    Kind regards,
    Lennart.
    Message was edited by: Lennart Hendriksma

  • 0CCA_C11 Infocune : Update Rule Migration Error

    Hello,
    I have installed the cube 0CCA_C11 from the standard BI content and started the migration of the update rule.
    Here, i am getting an error in one routine. There is one field in the cube "0CO_REPLINE", which is mapped with all fields of infosource.
    there is a routine on the field 0CO_REPLINE.
    when i tried to migrate the update rule it will give me following error.
    Rule (target: 0CO_REPLINE, group: 01 Standard Group): Syntax error in routine
    And when i cheked the routine it will give the following error
    E:The type "_TY_S_SC_1_FULL" is unknown
    Please guide me and suggest.
    Regards,
    Macwan James.

    Hi ,
    There is a small change inthe routine whichi your have to do.
    Here is the code for the routine. Hope this helps
    $$ begin of routine - insert your code only below this line        -
      Data:
        COMM_STRUCTURE   type tys_TG_1_full,
        l_subrc          type sy-tabix,
        l_abort          type sy-tabix,
        ls_monitor       TYPE rsmonitor,
        ls_monitor_recno TYPE rsmonitors.
      REFRESH:
        MONITOR.
    Runtime attributs
        SOURCE_SYSTEM  = p_r_request->get_logsys( ).
        MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
    Migrated update rule call
      Perform routine_0002
      USING
        COMM_STRUCTURE
      CHANGING
        RESULT
        l_subrc
        l_abort.
    *-- Convert Messages in Transformation format
        LOOP AT MONITOR INTO ls_monitor.
          move-CORRESPONDING ls_monitor to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        IF l_subrc <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
        ENDIF.
        IF l_abort <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
        ENDIF.
    $$ end of routine - insert your code only before this line         -
      ENDMETHOD.                    "compute_0CO_REPLINE
    Regards,
    Macwan James.

  • Can't connect to yahoo messenger, iTunes, anti-virus updates, etc..

    I have a wireless router and ever since I started using it I can't connect to yahoo messenger, iTunes, anti-virus updates, etc.. but the rest of the internet works fine. I've checked firewalls and everything seems fine.  I've searched on here and have seen some similar posts but no solutions.  Do I just have to give those things up to have a wireless connection??

    I think that the router is blockingthe messaenger or other services to open..... try upgrading the firmware ... once upgraded ...reset & reconfigure the router ....

  • How do I order ResultSet AND update? My attempts yield ORA-00907 or  ORA_01732

    I am using JDev 9.0.3 to create an application I run using Java 1.3.1 and Oracle 9.2.0.1.0 JDBC drivers.
    I want to select the rows of a single table ordered by a "sortorder" column, iterate through the records, update as required, and occasionally move to the insert row, insert a record, and move back to where I left off.
    Can anyone supply the recommended way to do this?
    Now if I drop the "order by" clause/requirement I can do this just fine.
    However, if I add the "order by" clause (as below) I get error ORA-01732 "manipulation operation not legal on this view" when issuing rs.insertRow() (note NOT moveToInsertRow(), updateLong(), etc. but the actual insertRow() )
    myconn.prepareStatement(
    "select rowid, temptopsort.* from temptopsort order by sortorder"
    , ResultSet.TYPE_SCROLL_INSENSITIVE
    , ResultSet.CONCUR_UPDATABLE
    I get this same result with ResultSet.TYPE_SCROLL_SENSITIVE, with JDK 1.4.1 (and appropriate Oracle ojdbc14.jar, etc.)
    So again my questions is HOW DO YOU ITERATED THROUGH AND ORDERED RESULT SET AND UPDATE/INSERT?
    Thanks
    R.Parr
    Temporal Arts

    Thomas,
    Oracle was the first RDBMS I used (way back, around the year 1990, I believe). Several years later, I moved from Oracle to Informix. It took me a long time to realize that, although Informix and Oracle are both RDBMSs, they are very different. What I needed to do was forget how I used to work with Oracle, and learn how to work with Informix.
    Naturally, before I came to this realization, I spent a lot of energy cursing Informix and wondering, "why doesn't it work like Oracle does?"
    However, after I made the "mind-switch", and learned to do things the Informix way, everything was smooth sailing (and very enjoyable, too :-)
    So I'm only guessing, of-course, but I get the feeling that you may be encountering a similar reaction to me, now that you are migrating from "MySQL" to "Oracle".
    The usual advice I see given to people in (what I assume to be) your situation, is to peruse the Oracle documentation and/or the book "Expert One-on-One Oracle" by Thomas Kyte.
    Good Luck,
    Avi.

  • I deleted blackberry messenger by mistake and now i cann...

    I deleted blackberry messenger by mistake and now i cannot load any of the new ones how do i solve this?

    Hi there!
    The simplest way to install BBMessenger to your BB is to, using IE, go to this page:
    http://mobileapps.blackberry.com/devicesoftware/entry.do?code=bbm
    and follow the instructions. 
    If that does not work, then please return to these forums (http://supportforums.blackberry.com/rim/) and register an account so that we can provide you with direct assistance.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Please  update me migration activity plan in sap mm point of view

    Hi,
    In our company, we have two company codes  have two plants each one, Now management decided to these two plants in to one company code existing, please  update me migration *** Merger activity plan in sap mm point of view?
    Padma
    Edited by: padmap on Apr 14, 2010 7:08 AM

    I guess it can be done. You need to cut all links of plant to the existing company code in ENTERPRISE STRUCTURE, and then reassign the said plant to the other company code.
    Edited by: Afshad Irani on Apr 14, 2010 11:23 AM

  • Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

    The full message said:
    There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later.
    I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
    Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

    My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
    The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
    Thanks

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • Green screen, downlading files and updating programs often stuck at 99%.

    Okey so I have got this problem for a 20 days, since I build my own computer. Some videos on youtube and other video stream sites bug out in the way that the video just goes green, and starts fast forwarding. Then I think streams on twitch.tv for example, I cant watch a stream for longer than 20 second and the video gets frozen and the stream needs to be refreshed. And updating games, downloading files often gets stuck at very end of the progress, and it wont succesfully download or update. Im not sure is it about Flash Player/Shockwave Player but if there doesnt come example green screen it may show something like you are missing add-on Flashplayer but when i refresh the page it may run the video fine for some time.
    The problem rarely happens at youtube but heres one where it happened Crs Piglet (Vayne) first ever NA Penta - YouTube
    Heres video where the video didnt start at all and aswell when it did the screen gone green again and fast forward. (contains adds) http://www.thevideo.me/kmqcwhblzheh
    Heres screenshots and one bad quality phone photo album of these problems, green screens, videos stuck, downloading stuck and updating stuck 99-100%. Imgur
    Heres my computer specs:
    My operating system is:          Microsoft Windows:  8.1 Pro, 64-bit
    Processor:                             Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz
    Graphic card:                         Nvidia GeForce GTX 760     Driver updated to: Geforce Game Ready Driver 347.52.
    Memory (ram):                       8GB
    Motherboard:                         MAXIMUS VII RANGER
    Dont know what else info I could put on about my computer really... I have tried to find answer, like disabling hardware acceleration, deleting flashplayer memory file, safe modes and all kind of tips I as able to find from internet.
    And I use mozilla firefox (36.0), but the problems happens aswell in Internet Explorer. I have updated Flash Player (16,0,0,305), my drivers (Geforce Game Ready Driver 347.52), all windows updates, java(1.8.0?), but still cant find the answer why watching videos/streams work well.
    Im sorry if I missed some info but ask if theres something.

    The green screen means that hardware decoding has failed.  It's probably a subtle, intermittent driver bug.
    You can disable hardware acceleration in Flash to avoid this while you wait for updated drivers to become available:
    Video playback issues

  • Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    hello,
    i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

    I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

  • What is difference between modify and update i am using

    hi
    what is difference between mofify and update
    my requiremen is to have three condition checkec while mofifying or updating from a internal table
    the three fields are
    cus no
    status
    date these all are primary key in the database table
    so which sould i use modify or update
    there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
    pls suggest whihc to use and how to implement the check on teh threee primary key
    like if modify ztable from table it_test
    now where condition ? can be used or not with modify? and if yes how
    if not should i use update will update create a new entry if no entry is there and please give syntex
    regards
    Arora

    Hi Nishant Arora,
    Modify: It works in performing two actions.
    They are: Insert + Update.
    For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
    Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
    Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
    These are the cases you need to write these statements.
    Syntaxes: :
    Go through this links please.,
    http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
    Reward points if useful
    Cheers,
    Swamy Kunche
    Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

Maybe you are looking for