Messgae Tracking, C350, AsyncOS.6.3.5-003

Hi IronPort Nation,
in message Tracking I can configure a search for example to look up envelope sender with keywords "Begins With", "Contains" and "ls". What means "ls"?
Can anyone explain the keyword "ls"?
With Regards, jpk

Hi,
"Is" means exactly match.
Many thanks for your fast answer. Eye glasses kann help, I think!
With Regards, jpk

Similar Messages

6.3.5-003 and 6.1.5-110 for Email is now available.

IronPort Systems is pleased to announce the General Availability
of AsyncOS 6.3.5-003 for Email and a Maintenance Release of
AsyncOS 6.1.5-110 to all customers. These releases apply to all
our Email Security Appliances (C-Series and X-Series) and
Security Management Appliances (M-Series).
New Features, Enhancements, and Fixes in AsyncOS 6.3.5
* New Feature: Image Analysis (Requires Feature Key)
* New Feature: Detailed SMTP Logging
* Enhanced: SPF Content Filter Conditions
* Enhanced: SMTP Routing
* New Hardware Support: Support for the new X1060 and M1060 appliances
* Fixed: Bounce Verification Treats All Bounces As Invalid
* Fixed: DHAP setting is not rejecting recipients
New Features, Enhancements, and Fixes in AsyncOS 6.1.5
* New Hardware support: Support for the new X1060 and M1060 appliances
Please refer to the release notes for upgrade information.

There is no mention of New Hardware Support: Support for the new X1060 and M1060 appliances on this link

NDR message recived but the original email not available in the sent items

Dear All,
i'm using exchange 2010 and my client is outlook 2003.He sent one email inbound and its get error message that size of the message is exceeding the limit ,try to remove the attchements.etc...
i checked in outlook web access also,but not available.
But when i receive this error ,the user's original message was not showing either in the sent items or with the NDR message.
the generated message output is given below.
Generating server:
/O=domain/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=Mxxxxxxxxxe9
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=Axxxxxxxxxxxx1a
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=hxxf
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=txxxxA
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=pxxxJ
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=dxxxB
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=Exxxxxn
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=hxxxxxx9
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
i have set email attachement limit as 10 MB.
please help me how can i find the message body of the original message from Exchange.
Best regards,
Najim.

Hi Najim,
Before we go further, I'd like to know if all the emails which fail to be delivered are missing in the sent items.
If yes, I recommend you check if there is any transport rule to make it.
If not, I recommend you try the messgae tracking log to monitor the missing emails. The undelivered emails may be stuck in the queues and you can use the commend get-queue to check it.
And here is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/en-US/20e7cd93-5954-496d-b26c-b52993a764cb/exchange-2010-sent-items-removed-for-ndr-emails?forum=exchange2010
Thanks,
Angela Shi
TechNet Community Support

V6.1.5 and v6.3.5

In my available upgrade list...

or can we upgrade directly from our
AsyncOS 6.1.0-307 to AsyncOS 6.3.5-003?
AsyncOS will only give you the option of upgrades which we've tested and support, so if you're seeing AsyncOS 6.3.5-003 in the upgrade list then there's no problems with jumping directly to that version.
Of course, you should always read the release notes (available on the support portal) before doing any upgrades just in case there's something relevant to your environment in them.

Time Machine Disk borked after 2013-003 security update

I installed the 2013-003 update on the weekend, and conincidentally my Time Machine disk is now locked. I haven't installed anything else really, so this Security Update is the only change I've made in recent memory, which makes me think that it is the cause, or at least the exacerbating factor.
Background: I have a 27" iMac 3.4GHz / 16 GB (iMac 12,2) with running Mountain Lion 10.8.4. I have an external RAID array consisting of 2x 3 TB Seagate Barracudas in a Nexstar MX two-bay enclosure, with the enclosure hardware controlling the RAID. This has worked more or less flawlessly since last fall -- that is until this update. No raid errors from the enclosure -- as far as it knows the disks are in fine health.
After restarting following the update, I get a message that the OS has locked the Time Machine disk (my aforementioned RAID array) -- so I can read data from it, but I can no longer write -- I can no longer make backups. It mounted the disk, and suggested I use disk first aid to fix it, so I do.
Open Disk First aid, and set it to Verify. I get some strange errors. Don't take my word for it, here's the log:
2013-08-18 15:12:11 -0600: Disk Utility started.
2013-08-18 15:12:18 -0600: Verifying partition map for “JMicron H/W RAID1 Media”
2013-08-18 15:12:18 -0600: Starting verification tool:
2013-08-18 15:12:19 -0600: Checking prerequisites
2013-08-18 15:12:19 -0600: Checking the partition list
2013-08-18 15:12:19 -0600: Checking for an EFI system partition
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s size
2013-08-18 15:12:19 -0600: Checking the EFI system partition’s file system
2013-08-18 15:12:19 -0600: Checking all HFS data partition loader spaces
2013-08-18 15:12:19 -0600: Checking Core Storage Physical Volume partitions
2013-08-18 15:12:19 -0600: The partition map appears to be OK
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:19 -0600:
2013-08-18 15:12:33 -0600: Verifying volume “Term Meshern”
2013-08-18 15:12:33 -0600: Starting verification tool:
2013-08-18 15:12:34 -0600: Checking file system2013-08-18 15:12:34 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:12:34 -0600: Checking extents overflow file.
2013-08-18 15:12:34 -0600: Checking catalog file.
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file permStore
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:13:08 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:13:08 -0600: (It should be 1 instead of 0)
2013-08-18 15:14:37 -0600: Incorrect number of thread records
2013-08-18 15:14:52 -0600: Checking multi-linked files.
2013-08-18 15:16:02 -0600: Checking catalog hierarchy.
2013-08-18 15:17:00 -0600: Invalid directory item count
2013-08-18 15:17:00 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067450)
2013-08-18 15:17:02 -0600: Missing thread record (id = 9067458)
2013-08-18 15:17:02 -0600: Invalid directory item count
2013-08-18 15:17:02 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:17:02 -0600: Checking extended attributes file.
2013-08-18 15:18:24 -0600: Checking multi-linked directories.
2013-08-18 15:18:25 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be 19 instead of 18)
2013-08-18 15:18:25 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:18:25 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:18:25 -0600: Incorrect number of directory hard links
2013-08-18 15:21:13 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:21:13 -0600: Error: This disk needs to be repaired. Click Repair Disk.2013-08-18 15:21:13 -0600:
2013-08-18 15:21:13 -0600: Disk Utility stopped verifying “Term Meshern”: This disk needs to be repaired. Click Repair Disk.
2013-08-18 15:21:13 -0600:
2013-08-18 15:21:19 -0600: Verify and Repair volume “Term Meshern”
2013-08-18 15:21:19 -0600: Starting repair tool:
2013-08-18 15:21:19 -0600: Checking file system2013-08-18 15:21:19 -0600: Checking Journaled HFS Plus volume.
2013-08-18 15:21:19 -0600: Checking extents overflow file.
2013-08-18 15:21:20 -0600: Checking catalog file.
2013-08-18 15:21:53 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file permStore
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:21:54 -0600: Incorrect block count for file shutdown_time
2013-08-18 15:21:54 -0600: (It should be 1 instead of 0)
2013-08-18 15:23:24 -0600: Incorrect number of thread records
2013-08-18 15:23:38 -0600: Checking multi-linked files.
2013-08-18 15:24:50 -0600: Checking catalog hierarchy.
2013-08-18 15:25:48 -0600: Invalid directory item count
2013-08-18 15:25:48 -0600: (It should be 89693 instead of 89695)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067450)
2013-08-18 15:25:50 -0600: Missing thread record (id = 9067458)
2013-08-18 15:25:50 -0600: Invalid directory item count
2013-08-18 15:25:50 -0600: (It should be 332226 instead of 332224)
2013-08-18 15:25:50 -0600: Checking extended attributes file.
2013-08-18 15:27:12 -0600: Checking multi-linked directories.
2013-08-18 15:27:13 -0600: Invalid parent for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be 19 instead of 18)
2013-08-18 15:27:13 -0600: Invalid name for directory inode (id = 9067450)
2013-08-18 15:27:13 -0600: (It should be dir_9067450 instead of temp9067450)
2013-08-18 15:27:13 -0600: Incorrect number of directory hard links
2013-08-18 15:30:01 -0600: The volume Term Meshern could not be verified completely.
2013-08-18 15:30:01 -0600: Volume repair complete.2013-08-18 15:30:01 -0600: Updating boot support partitions for the volume as required.2013-08-18 15:30:01 -0600: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-08-18 15:30:01 -0600:
2013-08-18 15:30:01 -0600: Disk Utility stopped repairing “Term Meshern”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2013-08-18 15:30:01 -0600:
So since this, I can rarely mount the disk. When I can, I cannot unlock it to back up to -- although if it's awful as it suggests, I don't think I want to.
But, it all seems a little strange to me. This is RAID, I shouldn't have these problems, no? I mean, the disks are fine -- although if there was an error on the primary, enough time has passed that's been copied to the secondary by now, so I can't swap them.
Has anyone else had an external disk go T/U after this update? Is there some fix I'm missing? I have a new external disk on order (with Thundebolt) so if I have to rebuild my back ups, it won't take as long as this guy over USB, but I don't want to forgo the versions of the files I have no going back some 2 years.
Any insight? Is my backup borked, making me start over new and lose my back up history? Is there anyway I can recover this disk, outside of Disk First Aid / sending it to a data recovery place? Even do you think if I rolled back this update (if that's even a thing) would it set me back on track?
Thanks!

I had the same issue after a re-build of mountain lion on an older Macbook pro. I followed you link and instructions and it worked! Thanks wjosten

Audio-tracks delayed

With my *Digi 003 rack* and *Logic Studio Pro 8.0.2* I suddenly have recorded audio-tracks delayed when played back. If I play a guitar right on click and play it back, it is totally out of timing. Never had that one before. When I use the *Apogee Duet Soundcard*, all is working fine. Has anyone any idea what that may be?
Cheers!
Michael

Hi Anthro,
I just repeat this test for you rigth now..
it is very fresh test... in order to have a perfect sync when recording an external instrument with "Software Monitoring" turn to "OFF" (for be able to repeat this test on Logic that usually is used with SW turned to "ON" you must restart Logic or Core Audio before starting the test)
I repeat this test refering to specific Logic setting : *Software Monitoring turn to "OFF"*
(when SW is turn to ON, every external incoming Audio input is recorded in perfect sync with the SMPTE and BPM time)
I have use an External Midi Drum machine as sound source!
see the following pictures:
this is the MIDI object quantize at 1/4:
this is the Audio recording of the MIDI object and the relative coreaudio setting preferences
*software monitoring off*
this is the Audio recording of the same Midi object with a correct Recording Delay Compensation setting.
*software monitoring off*
If you have doubt about this test, feel free to replay me... I hope this should be help you to find a good sync....
in any case... this is not the same for all Audio devices, they can have different driver-hardware adding or less DELAY...there are faster device like Motu 828mk3 and there are not so fast device like as Digidesign core audio drivers that have proprietary security and rigths protection)
however, FOR A PERFECT Sync... i suggest to extend the resolution of the Samples Editor...
bacause some device can be set as 1124 instead 1024 (or different value)
(on My MOtu I get a near to perfect sync around 1009 /1012 Delay
(I hope this post can be helpful also for the people that they +*"cannot believe that"*+ )
Good Luck
fermusic

Cisco IronPort AsyncOS 6.7.6-068 for Management GA Notification

Cisco is pleased to announce the General Availability (GA) of a new major release of AsyncOS 6.7.6-068 for
Management to all customers. This release applies to all our Security Management Appliances (M-Series).
AsyncOS 6.7.6-068 for Management enables Centralized Tracking and Reporting for the new features introduced in AsyncOS 7.0 for Email.
New Features and Enhancements in AsyncOS 6.7.6-068 for Management
New Feature: Centralized support for the reporting and tracking changes in the AsyncOS for Email release 7.0:
RSA Data Loss Prevention
Marketing Message Detection
New Feature: Reporting by ESA Groups
Enhanced: Domain-Based Executive Summary Report now configurable by:
Domain of Email Server
Domain of Email Address
Fixes in AsyncOS 6.7.6-068 for Management
Fixed: MemoryError after losing Housekeeper thread [Defect ID: 52048]
Fixed: The Show Details link results in a timeout [Defect ID: 51558]
Fixed: Safelist/Blocklist should be exportable via CLI [Defect ID: 43360]
Fixed: LDAP Query strips spaces [Defect ID: 46099]
Fixed: Tracking database time does not update after system timezone is changed [Defect ID: 49407]
Fixed: Application error when accessing Online Help from the End User Spam Quarantine page [Defect ID: 52395]
This release has gone through our beta program, internal soak tests and is also running in production at our FCS customers.
Please upgrade at your convenience and let us know how you like this new release!
Cheers,
Jakob

Hi,
We identified an issue in AsyncOS 6.7.6-068 for Management that under certain circumstances can cause loss of historical reporting data when reporting groups are configured. To ensure a high quality release, further testing on our side is required.
6.7.6-068 is no longer available for upgrade to your M-Series appliances.
If you already upgraded to 6.7.6-068 we strongly recommend to disable group based reporting to avoid being affected.
We expect to release a new improved build of 6.7.6 shortly and apologize for any inconvenience or confusion this might have caused.
If you are required to upgrade to 6.7.6 before a new build is available, please contact Cisco IronPort Customer Support.
I'll let you know once the new build is available...
Best Regards,
Jakob

Message Tracking Automation?

Is it possible to automate message tracking such that I can have an automated report on what a specific recipient receives during a 24 hour period be generated and sent to that users supervisor? I would hate to have to do that manually every day.

hello -
i know i've been crying 'feature request' quite a bit but this is another good opportunity to do so. you can either work directly with your Cisco IronPort sales account team to elicit your request, OR try check out our new template to use when opening a support case to tell customer support about your issue directly.
below is a drafted version. feel free to reference it for now until we get the knowledge base updated.
andrew
Please fill out the following form to help us guage and understand your request. You may include it as your initial problem description when opening a support case. Once received, a customer support engineer will review your input and work with you to ensure your feature request is handled appropriately.
Feature Request Form
1. List the product(s) that your desired change should affect (AsyncOS for ESA/WSA/SMA, PostX, IEA, plug-in, etc).
2. List the applicable version(s) of the affected product(s).
3. Please describe how the current limitation(s) impact your business.
4. Describe how the system's behavior could change or be enhanced to facilitate your business needs.
5. If you have a particular vision for how this would be implemented in the user interface, please outline that.
6. Feel free to leave any additional comments below.

Differences between C350D and C350

Hello,
what is the differences between C350D and C350?
Thanks

Hi There,
C3x0D was designed as an outbound only box, the idea being that your internal servers would send mast amounts of mail to the C3x0D and we process and deliver.
The main differences are:
1: Multiple IP Interfaces
Deliver from 256 source addresses to minimise rate limiting issues
2: Configurable Source IP per destination
Nominate specific source IP for certain destinations
3: Virtual Gateways
10,000 Concurrent connections, delivery queue per destination
4: Domain Key signatures
Validate you are the trusted source of the mail
5: Destination Controls
Control delivery rates to suit ISP acceptance policies
6: Configurable Bounce profiles per destination
Customize retries and delay periods for differing destinations
7: Message and Content Filters
Apply disclaimers, unsubscribe information and tracking headers
8: Optional Sophos engine
Ensure clean mail only is sent
More information on the support portal regarding C350D, or messenger me and I will send you the pdf.
Laters :)

KIMYONG: Outbound Workflow Notification Event Message 를 tracking하는 방법

Purpose
Outbound Workflow Notification Event Message 가 발송됐으나 user가 받아보지 못한경우 가 발생했으나 user
이를 tracking하는 방법을 알아보고자 한다.
Solution
1. notification 이 발송될때 oracle.apps.wf.notification.send event발생한다
event key 로 Notification ID 를 사용한다.
2. 다음 조건에서만 The e-mail notification이 발송된다.
i) Notification status is OPEN or CANCELED
ii) Notification mail_status is MAIL or INVALID
SELECT status, mail_status
FROM wf_notifications
WHERE notification_id = '&nid';
iii) Recipient Role has a valid e-mail address and notification preference is in the format MAIL%
SELECT email_address,
nvl(WF_PREF.get_pref(name, 'MAILTYPE'),notification_preference)
FROM wf_roles
WHERE name = upper('&recipient_role');
iv) Workflow Deferred Agent Listener is running
v) Workflow Notification Mailer is running
3. e-mail로 발송되기전 message가 2번 정지한다.
Raised --> WF_DEFERRED Queue --> Processed by Deferred Agent Listener --> WF_NOTIFICATION_OUT Queue --> Processed by Notification Mailer and sent as e-mail
4. oracle.apps.wf.notification.send을 dispatch 할때 error가 발생하면
message 는WF_ERROR queue에 enqueue되고 .
Error Agent Listener 가 WF_XML.Error_Rule 을 수행하는 oracle.apps.wf.notification.send 의
ERROR subscription 을 dispatch합니다.
5. notification id 와 WF_DEFERRED and WF_NOTIFICATION_OUT queue 의 message stauts 등을 확인하기 위해 $FND_TOP/sql/wfmlrdbg.sql 를 수행합니다.
PROCESSED in WF_DEFERRED - The message is enqueued to WF_NOTIFICATION_OUT
PROCESSED in WF_NOTIFICATION_OUT - The message is sent as e-mail
READY in WF_DEFERRED - Check if Deferred Agent Listener is running
READY in WF_NOTIFICATION_OUT - Check if Notification Mailer is running
6. notification id 의 outbound XML message 를 분석합니다.
. The wfmlrdbg.sql output provides the XML message generated by WF_XML.Generate at the time the script is run. If the original XML message used by the mailer is required to be analyzed following SQL may be used.
SELECT tab.user_data.text_lob text_lob
FROM applsys.aq$wf_notification_out tab
WHERE dbms_lob.instr(tab.user_data.text_lob,'&1') > 0
7. 필요하다면 WF_NOTIFICATION_OUT queue 를 rebuild 합니다.
The wfntfqup.sql script rebuilds the WF_NOTIFICATION_OUT queue by dropping and recreating
that queue, removing pending notification messages from the WF_DEFERRED queue, and
repopulating the WF_NOTIFICATION_OUT queue from the Oracle Workflow Notification System
tables.
Wfntfqup.sql Version >=115.9
If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any, the
script returns an error message that specifies how many alert e-mail messages are pending
and indicates that these messages must be processed before the script can run.
Wfntfqup.sql Version <= 115.8
If you have implemented Oracle Alert and the WF_NOTIFICATION_OUT queue contains any pending
alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any,
exits without performing any changes.
Stop Notification Mailer, rebuild Mailer Queue using $FND_TOP/patch/115/sql/wfntfqup.sql.
Reference
Note 433359.1

Thanks for your update.
I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
*C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap -Ddbcfile=
c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
.om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
ut until necessary parameters are retrieved for Logger to be properly started.
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
IMAPStore,Sun Microsystems, Inc]*
Kindly suggest need to any setup in ms exchange server or firewall level.
Thanks

AsyncOS 5.5 - errno 60 in mail logs

We upgraded our IronPorts to AsyncOS 5.5 two weeks ago and over the past week, an issue has begun to manifest itself. We are wondering if anyone else has seen this.
When sending to some domains (at this point about 20 or so) we receive error responses (soft bounces) and eventually hard bounces. The errors we are seeing in the mail logs are:
Thu Nov 15 11:43:57 2007 Info: Delayed: DCID 11509176 MID 43979667 to RID 0 - 4.4.0 - Other network problem ('000', ['[Errno 60] Operation timed out']) []
and less often:
Thu Nov 15 11:33:23 2007 Info: Delayed: DCID 11508361 MID 44031268 to RID 0 - 4.4.0 - Other network problem ('000', ['[Errno 54] Connection reset by peer']) []
The systems on the other side appear to be all fronted by PIX Firewalls and do not have the SMTP Fixup command enabled. (If you telnet to it you get 220 ************************) Only very small manual telnet emails seem to make it through. The MTU packet size by default on their end is 1380. They lowered it and more emails made it through, but not all. The MTU packet size on our firewalls in 1500 and adjusting the packet size on the IronPorts has not helped the issue.
Has anyone else seen this, or better yet, fixed this issue? If you look at delivery status and see domains that are up and have a lot of softbounces, this may be a sign that this is happening.
Any and all help would be appreciated.

We turned it on as soon as it was a feature in AsyncOS - around 2005 - despite it being half implemented (ala AsyncOS's support of SMTP-TLS).
It's not that it was only half implemented - it's that there are two different protocols at play here.
The first is DomainKeys, which IronPort has supported for some time. This is an early standard designed largely by Yahoo. DomainKeys is covered in Historic RFC 4870.
The second is DomainKeys Identified Mail, or DKIM, which is a newer standard based on a combination of DomainKeys and Cisco's Identified Internet Mail. DKIM is covered in the Standards Track RFC 4871, and was implemented in AsyncOS 5.5.
However, it is pretty much finished [for everyone on the internet] for the next 12+ months unless Cisco+Ironport fix the PIX smtp fixup issue.
It's been fixed since August in PIX code 7.2(3). The problem is of course that it's the recipients end that needs this upgrade (or to disable MailGuard), not the end doing the DKIM signing, which obviously make it more difficult to resolve.

How to keep track of the changes done in ALV GRID Report

Hi Experts,
how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
Valuable answers will be rewarded.
Thanks,
Satish.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How to keep Track of the Changes after Go live in OM

Hi Experts,
Need one information, after Go Live, PPOME is used by the end users for tracking or updating daily changes. While making he changes do we also need to keep a copy of the changes made in the Development server or it is fine if the changes are seen only in Production system.
If any body has made changes to the existing Organization and Staffing, how do we keep a track of who has done the changes is there any standard report through which we can get the information.
Please advice.
Regards,
Subbu

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How to keep Track of the wagetype Changes

Hi Experts,
How to keep Track of the Changes after changing the wagetype values.If any body has made changes to the existing wagetype, how do we keep a track of what changes has done, is there any standard Tcode through which we can get the information.
Thanks in advance,
Regards,
Magesh.S

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How to keep track of how many records to display in a page.

Hi All:
I am using Weblogic 9.2, Web Services Client, and Struts.
I have a java client in struts that calls a web services.
The "ID" field contains a Java integer.
The "First_Name" is a Java String.
The "Effective_Date" field is a Java date field.
The web service returns an arrayList of a class called Result.
Code for Result.java:
>
public class Result
int id;
String first_Name;
Date effective_Date;
public int getId
return id;
public void setId(int id)
this.id=id;
public String getFirst_Name()
return first_Name;
public void setFirst_Name(String first_Name)
this.first_Name = first_Name;
public Date getEffective_Date()
return effective_Date;
public void setEffective_Date(Date effective_Date)
this.effective_Date=effective_Date;
From the arrayList, I displayed the result as the following:
ID FIRST_NAME EFFECTIVE_DATE
3 John 9/10/2007
2 Andrew 1/11/2006
5 Peter 3/4/2006
The "ID" header is a link.
The "First Name" header is a link.
The "EFFECTIVE_Date" is a link.
If I clicked on the link "ID", the first time, it will sort the rows in ascending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
2 Andrew 1/11/2006
3 John 9/10/2007
5 Peter 3/4/2006
If I clicked on the link "ID", the second time, it will sort the rows in descending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
5 Peter 3/4/2006
3 John 9/10/2007
2 Andrew 1/11/2006
If I clicked on the "First_Name" field the first time, it will sort the rows in
desceding order.
If I clicked on the "First_Name" field the second time, it will sort the rows in
ascending order.
This applies the same for the "EFFECTIVE_DATE".
If the arrayList returns 80 records of class Results.java.
I needed to displayed only the first 50 records for the first page and 30 records for the second page.
How do I keep track of that so that when I am in the second page, I know to display only record 51 to 80?
If I have a arrayList that returns 120 records of class Results.java.
In the first page, it displayed only 50 records.
In the second page, it displayed only 50 records.
In the third page, it displayed only 20 records.
Assuming I am able to sort the rows by ID, FirstName and Effective_Date by using Results.java implementing the
Java Comparator class. Is it still possible to keep track of how many records displayed in the first page and how many records should
be dispalyed in the second page?
Any hint would be greatly appreciate.
Yours,
Frustrated.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

Messgae Tracking, C350, AsyncOS.6.3.5-003

Similar Messages

Maybe you are looking for