Met issue in generic master data load

Hi Experts,
i met an issue which shows:System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE when updating data from PSA to infoobject.
the scenario is:
1.i have created a generic master datasource on VBAK table in R3, and only extract four fields to BW, they are AEDAT, VBELN, VKBUR, VKORG.
2. on BW side, created one infoobject s_saled(sales document) along with the other three characteristics as its attribute.
3. then create direct infosource to load data from R3 to the infoobject s_saled.
4. infopackage to load data
data load to PSA successfully, but met issue at the update step in the monitor. the error message is 'System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE'. it says that 6279 records are new but 0 changed.
but when i checked the infoobject, i found that the data are already loaded here.
can anyone give me some advice on this?
thanks in advance!
Eileen

hi eileen,
if u face any error you can simulate it in the monitor in the details tab.
as you say the master data is already loaded the purpose of your action is done.
and you didnt tell if this error persist in subsequent loads.
thank you.

Similar Messages

Master data loading issue

Hi gurus,
    Presently i am working on BI 7.0.I have small issue regarding master data loading.
    I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
   How can i handle this.
Best Regards
Prasad

Hi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi

Automate Master data loads in BPC7(MS)

I need to update dimension members in SAP BPC7 (MS) from an external source.
The source system for my current project is BW, but if you have done any automated master data loads from any other system or even from a "temp" table please post your solution or tips.
Thanks!
Mez

Hi Mezert,
Would like to chime in with some of the things I've learned about this process over 3-4 years I've spent with BPC/Outlooksoft:
-- Automating maintenance of the dimension/master data might be the biggest single weakness of the BPC solution on the MS platform. It's one of the big reasons that the Netweaver platform basically replaces DTS/SSIS and has more direct linkage to BI/BW cubes and master data (InfoCubes).
-- It is also one a very common issue and in fact, you will have to deal with what the old-timers in BI call "slowly-changing dimensions" at almost every client eventually. For instance, you have a list of proucts/materials that every so often someone adds an item to. ...Well, before you can enter anything for it in BPC, you have to add the dimension member, of course.
-- So far, this challenge has been met by bringing in specialist DTS/SSIS experts in most cases who can employ the special "Custom Tasks" and build one of these packages to run in an automated way to populate the tables inside SQL Server and then execute the Admin MakeDim task to process the cube/application.
-- Usually the development/testing/deployment of these solutions is a non-trivial undertaking. It can be done, but there are peculiar challenges.
-- One example of a challenge is what happens if you need a dimension with > 65,000 members? Well, it can be created and populated by a DTS package, however, when you check the package and the custom task from the old Outlooksoft stuff out, you see that it CLEARS the entire dimension table before re-filling it. ...Yep, it wouldn't allow an "Append" function to run.
-- A second example of a peculiar challenge is that unless you update the Excel Dimension Sheet, you will have to do all the updates in SQL Server Mgmt. Studio and really won't be able to touch the BPC Admin again for that dimension.
Apologies for such a long post, but this is a fairly significant issue and I have to do a lot of research to piece together some of these things. ...If anyone else has something to add as a best-practice, please post.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

Bi admin process chains- content master data load has failed

Hi Experts,
i worked with Bi Admin cockpit set-up, all the things are going fine
but Content Master data load (Attribute)has failed and i got the errors like
1)data records for package 1 selected in PSA-2 errors
2)Error 4 in the update
can anyone suggest me how can i sove the issue
regards
Mrudula

Hi
yes, i got 2 errors in Psa
when i click the 1st error i got like
Data record 10023 & with the key
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
And i it gave the procedure as
if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
And when i click the 2nd error
it has showed the data record as 10024 and remaing explanation is same like 1st one
in this i am not getting, how to proceed the solution.
plz help me anyone
Thanks and regards
Mrudula
Edited by: mrudularajesh on Jul 1, 2009 7:39 AM

Master data loading in BPC NW 7.5

Hi all,
I am trying to load master data from BW into BPC using the packages provided in BPC7.5.
Master data infoobject in Bw is compounded with 3 other objects.2 of them dont have any master data tables.All they have is a text table(T table).
When i run the package i get a warning saying compounded object1 is empty.
i think i am getting the warning because it doesnt have any master data tables(P table,M table and Z table).
In a different case i had a compounded info object but i didnt have any issue because it had master data table to it.This case is diff since no master data tables exists.
Can someone help me on how to approach master data loading in a scenario where compounded objects dont have any master data tables.
Thanks,
Any help is appreciated.
KK.

Hi,
The document is for BPC when they didnt have the new process chains to load master data.Now they have 2 new process chains.One to load master data attributes and texts and the other one to load Hierarchy.And these 2 packages support compounded info objects too.
I was able to load profit center attr/texts/hierarchy into BPC although it was compounded to Controlling Area.This wasnt an issue because Controlling Area had master data defined. meaning it had P table and M table created.
But my issue is for this new master data load i am trying to do the compounded info object doesnt have master data tables.And thats causing an issue.It says Master data table for 0Division is empty.
I want to know if there is any workaround in BPC for this issue.
Any help is appreciated.
Thanks,
KK

I want to create generic master data attribute datasource on ANLA table .

hI,
I want to create generic master data attribute datasource on ANLA table .
and have to activate delta load.
Is it possible for delta upload on this table?
if it is possible then on which field i can create genric delta?

1.I want to fetch quantity ,inventory no , serial no.......
I have to enhance that datasource.....
2.else i can create master data for asset number using ANLA
I have opted 2nd option

Delta for generic master data extractor

Hello,
Is it not possible to load deltas for a generic master data extractor?
I have created a generic extractor on R/3 table MEAN (EAN number assigned to material). I have also performed the init run which worked fine, but no deltas are being loaded.
Why is this?
Best regards,
Fredrik

hi,
its possible
how to generic delta
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
SAFETY DELTA
check these links
oss note 368739
Symptom
For the setup of summarization levels and summarization data in the Profitability Analysis a 'Safety delta' of half an hour is used. This means, the system only includes records which exist half hour already. You want to reduce this delta in order to get more current data in reporting.
Additional key words
Summarization levels, summarization data, safety delta, time stamp
Cause and prerequisites
The reason for the duration of these safety deltas are possible differences in the clocks on different application servers. If the delta is selected too short, when updating the summarization levels/data, records may not be taken into account. In particular the Account-based Profitability Analysis depends on the sufficient length of the delta, so that update processes which take longer do not cause inconsistencies. For the Costing-based Profitability Analysis a lock is set. If not active update processes exist, it fails and the update terminates.
Solution
The attached source code correction is not part of the standard system. With this change the safety delta is set from 30 to 5 minutes. You should only implement this, if exclusively the Costing-based Profitability Analysis is active in your system. If you also use Account-based Profitability Analysis we do not recommend the change for the above-mentioned reasons.
Generic delta safty intervals
oss note 392876
safety interval
0FI_GL_4 Safety Delta
Genric delta fro table
check this thread which already discussed about this topic
Generic Extractor - Delta
Shreya

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

Regarding master data loading for different source systems

Hi Friends,
I have an issue regarding master data loading.
we have two source systems one is 4.6c and another is ecc 6.0.
First i am loading the master data from 4.6c to bi7.0.
Now this 4.6c is upgraded to ecc6.0.
*In 4.6c and ecc6.0c master data is changing.
After some time there is no 4.6c, only ecc 6.0 is there.
Now if i load master data from ecc6.0 to bi7.0 what will happen.
Is it possible ?
Could you please tell me?
Regards,
ramnaresh.

Hi ramnaresh porana,
Yes, its possible. You can load data from ECC.
Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
You need to take care of Delta's before and after upgrade.
Hope it Helps
Srini

Duplicate records during master data loading.

hello guys,
I am reading one blog where the blogger wrote about 'Various issues in a BW Production project'.....I came across one issue which I couldnot understand...
Data loading failed due to Duplicate records during master data loading.......
Why do this error occur?How can we rectify this in a production environment?
Thanks and Regards,
S

Hi SChandx200 ,
May I ask where you get "Various issues in a BW production project"?
Many Thanks,

Generice Master Data - How ?

Hi All,
I have a need to create a generic master data. I have the code tested as an ABAP Program and it extracts exactly as it should. But how can I put together a generic data source, and this will be full load. Could anyone specify the steps to do it. I have copied the RSAX function group function ZRSAX_BIW_GET_MASTER_DATA. But not sure how to continue futher. There is no need for info package selection or anything. It is required to get the employee manager relation using ORGUNIT from employee. Any ideas or if you have a function module available please send.
Thanks,
Alex.

Please search forum for generic using FM. It has been discussed many times

Met issue in generic master data load

Similar Messages

Maybe you are looking for