Meta chain greyed out?

Hi experts,
We have a daily chain scheduled that runs by calling various local chains to run their own loads. the daily chain (main chain) is green so we are sure it is activated and scheduled to run. however, when we maintain the different local chains (i.e. double clicking on them) i noticed they are all greyed out. note this is in the Process Chain Maintenance Planning View (rspc). my question is, do the local chains have to be green to run? or is it valid that they are greyed out (im guessing since they are local chains under a main chain that is scheduled)?
one thing to note is even if it is greyed out, clicking on the logs shows that there are runs for the local chain...i just want to get some verification from my inquiry above

Hi Mark,
You can display processes, which have not been run yet, in the log view for a process chain. This depends on whether or not the chain has been changed since the last run. If you have not changed the chain since the run that needs to be checked, then the processes that have not been run are displayed in gray in the log view for this run. Also, the link for such processes is marked with dashes if the event has not yet been triggered. However, if the chain has been changed since the run that needs to be checked, then the processes that have not yet been run and the events that have not yet been triggered are not displayed at all in the log view for this run.
Hope this helps...
Best Regards,
DMK
*Assign points if it helps...

Similar Messages

Iphoto has greyed out events with 0 photos

Perhaps this is baby steps but I've got istream up and running on my macbook air.
At the moment I have pictures taken in November which have events that are greyed out and say 0 photos. When I click on them the photos appear but I don't know how to make sure that they are going to stay? Have I exceeded the 30 day stream time but I these are in the last 1000 photos? If so, what to do to bring them in permanently?
My next step is to break down my huge library on my old mac and bring it over here and pitch it. That library is more than 60GB so I will want to move the meta data and whatever labeling etc I have done on my old iphoto. I tried file export but I lose the event clustering so I think I have to chop it up into little libraries and then move those over. I don't have a need to merge libraries after that.
Am I making sense?
THANKS

For iPhoto 9.1.5:
http://support.apple.com/kb/HT4754
Regards,
Colin R.

JCO - Get meta data - Grey status in JCO connections tab

Hi all,
I read many post on this topics within this forum but I didn't succeed to get meta data required and to set correctly my connection.
Let's start quickly to give you my conf
In the j2ee admin
-> Services > SLD Data Supplier > CIM Client Generation Settings
I set fields with : SLD7000 / 50000 and my logon info
Save and test -> result is ok !
In my web dynpro application, I am able to get correct BAPI from BCE system using my logon info. And I map my view to display data from the corresponding BAPI called.
So at this time, in my IDE, the connection to the SAP Backend system SAP works because I can get the list of BAPIs from the BCE SAP Backend System as well.
Build and deploy my application.
Now, let's go to webdynpro welcome page on my j2ee server : http://<host>:<port>/webdynpro/welcome
-> content administration
-> I select from the left tree browser my application, and open the "JCO Connections" Tab. I can see my connections previously I set in my webdynpro application. But I CAN'T use the button "Create" to configure new JCO connection. ??
Last thing:
in the BCE backend system
transaction : RZ70
I have, host = sldmain and service = sapgw47
Also, in the list of data collection programs, everything is checked as active except the program "_SLD_RFC"
I don't know if it is important....?
Finally, I give you from the exception I got in my browser only lines "Caused by"....
Caused by: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
Caused by: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create J2EE cluster node in SLD for 'J2E.SystemHome.localhost': com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="J2E.SystemHome.localhost"
Thanks a lot for your support and help,
Best regards,
Emmanuel.

Hi Emmanuel
You said
" I select from the left tree browser my application, and open the "JCO Connections" Tab. I can see my connections previously I set in my webdynpro application. But I CAN'T use the button "Create" to configure new JCO connection. ??"
What is their status ? Is it green on red? Usually create is greyed out if it is green. What about Edit?
Try creating a new Web Dynpro component with another destination name ,deploy and then check the Content administrator if these new destinations have Create enabled
After running RZ70 did you check the Technical System in SLD administration to see if the technical details have been propogated ?
Regards
Pran

SharePoint 2013 Community Template – The Spelling ICON is greyed out when replying to a discussion on a discussion board

<meta content="text/html; charset=windows-1252" http-equiv="Content-Type" /><meta content="Microsoft Word 14 (filtered)" name="Generator" /><style></style>
Much like the title says the Spelling ICON is greyed out. When I go to the Discussion List and select the thread then view the list in “Flat” view, the Spelling ICON is not greyed out. However, this is a different aspx file. The first method
displays the thread via the Topics.aspx (the normal way) whereas the second displays the thread using the Flat.aspx.
Regardless, why is the Spelling ICON greyed out on the normal way you would reply to a discussion thread? By the way, I had to activate the Publishing Infrastructure on the Site Collection to get the Spelling ICON just to show up when I click on “reply”
from a Discussion thread.
Thanks to anyone who can help!

Hi,
According to your post, my understanding is that when you went to the Discussion List and selected the thread then view the list in “Flat” view, the Spelling ICON was greyed out.
By design in SharePoint, when you view the list in “Flat” view, the ribbon would be as below:
Only when you add a reply and move the mouse to the content, the Spelling ICON will appear.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Version set option greyed out

I use PSE 8 to organise and edit my photos. Today I edited a photo and when given the option to save the new version, the option to save as a version set with the original was greyed out and unavailable. Any idea what is going on here since I normally tick this box?

If only it was that simple. The version set option is still greyed out when using "Save As". Experimenting further, I have discovered the greying out does not occur for all files I try to edit. The problem I am exoeriencing seems to be with some jpg files taken on an iPhone and emailed to me. There doesn't seem to be a problem with jpg files downloaded from my Ricoh Caplio camera. Could there be a setting in the picture meta data that interferes with how PSE handles the file?

Greyed out images; exports to Mail are blank; generating images issue

Selected images are greyed out in the main viewer; sending a reduced file size via Mail gives a blank mail, but with a selectable rectangle and correct file name with a size only around 25kb. Sending originals at 100% works OK. The generation of reduced size images seems to be causing the problem as I can view an image at 100% in the main viewing area. Exports seem to still work OK - again 100%.
I have deleted the prefs file. I have deleted the application, although reinstallation seems simply to un-delete, returning the app to 'as was'. I'm hopeful that reinstalling will cure this, but how does one remove the application completely?

I got another great answer from yahoo.
They told me to clear cookies, cache, etc...
They said to reboot.
They said to try opera.
It seems no one reads my emails there to support nor do they do proper troubeshooting.
I am in the IT field and I appreciate good support when I get it but unfortunately it's so rare.
The first thing they should be doing is trying to either replicate the issue or verify whether yahoo did any updates on their end.
Instead I'm being sent ridulous help links because they can't even read.
I've sent all information necessary from screenshots to os to devices.
Personally I believe yahoo made an update that's screwing everything up.
Not only have I done those things they suggested but I told them twice already.
The only thing I havent tried was opera. I tried 4 different browsers and none worked.
I tried opera just to shut them up and it didn't work either. It seems opera handles mobile mail differently than all the other browsers as they show no pictures at all. They aren't missing, they just arent there with how opera handles the mail. They instead give you a link to view the store advertisements.
I think I need to call them and see how far up the chain I can get with someone who can actually read and even troubleshoot.

Sharing Icon Greyed Out

Hello, last week we went to setup a new share on our Tiger server 10.4.2 and we found the "Sharing" button in WGM to be greyed out. No matter what we did would get it back. We authenticated, rebuilt permissions, rebooted and nothing seemed to make a difference. I've seen other references to this problem on the forum with no response actually solving the question. Any ideas? Our next step is to run the 10.4.3 upgrades, could this make the problem worse?
Thanks

Can you please confirm wether or not you can edit users? The user list will not be grayed, but if you select a user, the editable options will be. I suspect you have some Open Directory policies that are not being met by Workgroup Manager. Confirm for me first though.
PowerBook G4 12" 867 MHz Mac OS X (10.4.3) 1 GB, 60 GB, AirPort Extreme, Bluetooth

Which Meta Chain is used ?

Hi Experts,
If a Chain's Scheduling Options in Start Variant is "Start Using Meta Chain or API"
I want to know which meta chain is used to start this local chain, could you pls let me know the way to do so?
Thanks in advance!

Hi,
Using API:
>When the selection options according to your requirement are not available, you should go for API and write code to suit your requirements.. .
Using MetaChain:
> You can also trigger the start of a process chain using a metachain
> If you start the start process using a metachain, it is not scheduled after you have activated the related process chain. The process chain is only started when the metachain, to which it is linked, is running.
Please Refer:
http://sap-help.nestle.com/sap_nw2004s/helpdata/EN/01/15843b74f7be0fe10000000a114084/frameset.htm
And to find out which meta chain has been linked with this start process:
> Goto planning view of the chain
> Select start proces, right click to open context menu
> Click display all jobs
> In the list of jobs displayed, select one
> click step
> select the program/command displayed
> from menu select goto-> Variant
and there you may find the name of the metachain
(But in case if it is a program(API) which is triggering this chain, the varaint in step will show again this chain name only)
Hope this helps....
Cheers,
Habeeb

Include updated website lists from Microsoft - Not greyed out

Hi,
As per description of the Group Policy setting "Include updated website lists from Microsoft" on GPMC console, by disabling this setting, the Microsft-provided lists are not used and the user will not be able to activate the feature.
If you disable the setting under "Policies\Windows Components\Internet Explorer\Compatibility View\Include updated Web site lists from Microsoft" the checkbox is detached but it is not greyed out.
I have tried to set the policy under Computer Settings, User setting and also making a Registry edition under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\BrowserEmulation by setting "MSCompatibilityMode" to "1" but the behaviour
is still not the desired.
Does anybody know if there is any way to grey out this setting?

Hi,
This policy controls the website compatibility lists that Microsoft provides. The updated website lists are available on Windows Update.
If you enable this policy setting, the Microsoft-provided website lists are used during browser navigation. If a user visits a site on the compatibility lists, the pages are automatically displayed in Compatibility View.
If you disable this policy setting, the Microsoft-provided website lists are not used. Additionally, the user cannot activate the feature by using the Compatibility View Settings dialog box.
If you do not configure this policy setting, the Microsoft-provided website lists are not active. The user can activate the feature by using the Compatibility View Settings dialog box
my comments:
the check for updates to the MSCVL is done the FIRST time the iexplore.exe process is started...
Try rebooting the computer or closing all open IE processes to see if the changes have taken effect.
Check if you have installed and activated Enterprise Mode which will over-ride any MSCVL settings.
Please provide a link to the website where you are seeing the 'undesired' behavior....
the google Plus web page plugin can change outcomes for x-ua meta determination.
Regards.
Rob^_^

Text wrap options are greyed out

Hi,
I am trying to create a "drop cap" by selecting a text box and changing the wrap options in the inspector however, the "object placement" options to wrap the text are greyed out and I can not change them, except for the options below, such as "object causes to wrap" check box and the "text fit" boxes.
Is this a glitch? I have restarted both my program and whole computer, as well as tried it in a new document, and it still is coming up greyed out.
HELP, I have a project due and I need to be able to add in drop caps!
Thanks

Hi Architecture Guy
Welcome to the forum.
A better method for creating drop caps:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=85&mforum=iworktipsn trick
Peter

Wi-fi option on my ipod touch is greyed out?

Hi,
My ipod touch won't connect via wi-fi and the option is greyed out when I try to connect manually. Two other ipod touches in my house are working fine. I've already reset it 3 times and no change.
Help!

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

How to grey out terms of payment in sales order.

Hi,
While making sales order ,user should not make changes in terms of payment.how we can restrict the user for any changes.
and what is procedure for this.
Regards,

you can get many treads if you had searched with your subject.Anyway please find one among them.
payment terms-greyed out field
I would prefer going for option of activating critical field in OVA8 if Credit management is configured in your client process.
thanks,
Srinu.

For Z Po order type - Item category field is greyed out.

Hi MM Experts,
I am an ABAper working on PO creation with respect to PR( PR with account assignment N) for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
Thanks in Advance
Pravee.

Hi All,
Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
Thanks
Pravee.

ITunes 11 has moved most of my audiobooks to music, and greyed out the "audiobook" option in the info pane. WHY?!?!?

Now I have a music library filled with audiobook content and music content all mixed up, playing EVERYTHING when I'm on shuffle because iTuness 11 has now also reset the previously-audiobook-now-music content not to be skipped in shuffle, and I can't fix it because the option is greyed out. Can anybody help me?

Just an update, following last nights USB sync all music shows as In the library on my iPhone, however only the same 500 or so songs are playable, the rest go from appearing to be in the library to going into the cloud and starting to download when manually selected. If on shuffle the music skips over them. The iPhone memory usage shows only about 10gb used most of which is for the iOS/apps, so once again my music library is not on my iPhone. Apple have managed to take a great product and turn it into a steaming pile of turd.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Meta chain greyed out?

Similar Messages

Maybe you are looking for