Meta-Data are missing for table

Dear ALL ,
I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error:
" Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES "
the required table INFTY_TAB is used as a generic table in the function module. I tried to use PA0008 but it seems it is not possible to use it through RFC call. How can I avoid this exception?
Thanks in advance.
Mehdi.

Hi,
This function by default is not remote enabled. Loot at BAPI to access/modify infotype data?
Regards,
Jarek

Similar Messages

Text messages and phone calls from March 2012 to date are missing after activating iphone5

text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Report Writer report required by Business Area GSBER for table GLPCT ECC6

Please help,
I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
I am using Libruary PCA which has GSBER already activated
In report I am able to select GSBER in General Data Selection and generate.
However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
Steve
Solution was to use Libruary 8A3
Edited by: Debra Dunford on Jun 29, 2011 10:34 AM

Hi ,
If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
This view has two tables : LFC1 and BWFI_AEDA2.
LFC1 - Vendor master (transaction figures)
BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
This standard extractor uses table LFC1 to show vendor balances.
And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
So for your issue, you can do datasource enhancement of 0FI_AP_20 .
The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
Hope the above reply was helpful.
Thanks & regards
Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM

Master data Lookup missing for sold to party

Master data Lookup missing for sold to party?
The look up flow is from E_BOM to E_BOM1
regards

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Italic fonts are missing in Table in PDF files when we print it out

We use Adobe reader10 to open one PDF files, fonts in Table are display correctly on screen, but italic fonts are missing in Table in PDF files when we print it out. Any ideas?
The PDF display correctly when we use Adobe Reader 9 to open it or print it out.

George_Guo wrote:
Why it is OK for Adobe reader9, and not OK for Adobe reader10?
You could try posting your question on this dedicated Acrobat Print forum: http://acrobatusers.com/forum/printing-prepress

Debit entries are missing in table J_1ITRNACC

Dear CIN experts,
I have very strange problem in case of Capital purchase.
My excise posting for capital goods is BED       100 Rs.
                                                              Ecess       2 Rs.
                                                          H.Ecess        1 Rs.
But at the time of excise posting in J1iex Accounting simulation is            BED   101.5   Cr
                                                                                On Hold BED     50.0   Db
                                                                                BED     51.5   Db
System is not considering 103 Rs amt for BED.
After clicking on post system gives above error Debit entries are missing in table J_1ITRNACC.
Please suggest for this problem.
Regards,
Gitesh

Hi,
SPRO-Tax on goods movement-India-Specify excise accounts per transactions.
Check for GRPO & CAPE, whether Dr & Cr accounts are maintained properly or not.
I think, entry is missing here.
Regards,
Piyush

After a rebuild/repair of my photo library thumbnails are missing for RAW images.

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day. This time was different though - after the rebuild/repair of my photo library thumbnails are missing for all RAW images (Canon). Images from other cameras and jpegs are all fine. Only the events with Canon RAW images have no thumbnails.
I am rebuilding the thumbnails once again but has anyone else seen this issue? Losing thumbnails to RAW images during a rebuild?

Every few months I rebuild my iPhoto library to make sure the database stays clean and up to day.
There is no need to do this. It doesn't achieve anything.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

Basic / Scheduling dates are calculated for both main orders and Collective

How the Basic / Scheduling dates are calculated for both main orders and Collective orders?
when in master data we have given different value of in house production time for both the orders.

Hi,
The basic dates are calculated from the data mentioned in the Material Master - In-house production time days, either lot size dependent or lot size independent.
The scheduled dates are calculated from the timings maintained in the routing.
In the configuration for Scheduling parameters for the order type - Adjust scheduling - the dates can be adjusted.
Kindly revert back if you need any further clarifications.
Warm regards,
Umesh Poojari

Important global parameters from Financial Accounting are missing for Asset

Hi friends,
When I'm trying to assign CHN Chart of Depreciation to c.Code 0319 the below error message is giving by SAP Sytem. This Chart of Depreciation is already 4 C.codes are using.
Could you pleasea provide the detailed procedure...
Error Message is:
The result of the check of company code 0319 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
Thanks,
shafi

Hi Shaik,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?

I keep getting the message that my registry settings are missing for importing and burning cd's and dvd's. Why?
I've completely uninstalled iTunes per the support instructions and reinstalled. But I still get the error message each
time I click on the iTunes icon. I went into iTunes support and searched for registry settings and got an error message 404.
It was no help.

Hey JWeaver208,
Thanks for the question, and great troubleshooting so far. If you continue to see this message after uninstalling and re-installing iTunes, you may need to install the device filter in the Windows registry, as outlined in this resource:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Thanks,
Matt M.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Images (w/correct meta data) are in catalog and on disk, but LR 5.7 considers them new on Import

For reasons explained below, I want to try to re-import all my images into LR and hope that none/few are in fact considered new and are imported. Yet, for some folders, LR is apparently unable to detect that my source images are already in the catalog, and are on disk, and that the source file meta data matches what LR knows about the images. When I click an image in LR and Show in Finder, I do see the imported image on disk. I can edit the image in the Develop module. So, it seems good, but all is not well.   Sorry for the long post here, but I wanted to provide as much info as I could, as I am really seeking your help, which I'd very much appreciate.
Here are some screen shots that illustrate the problem:
Finder contents of the original images
LR folder hierarchy
an image as seen in LR
Finder content of external LR copy of images
import showing 10 "new" photos
The original images ... (I'm not sure why the file date is April 2001 but the actual image date is January 2011; I may have just used the wrong date on the folder name?)
The LR folder hierarchy ...
An image as seen in LR ...
The external folder containing the images in the LR library
But on import of the original source folder, LR sees 10 "new" photos ...
I tried "Synchronize Folder ..." on this particular folder, and it simply hangs half-way through as seen in the screen shot below.   IS THIS AN LR BUG?   This is really odd, since "Synchronize Folder ..." on the top-level folder completes quickly.
I have a spreadsheet of of the EXIF data for the original files and those created by LR. (I extracted this info using the excellent and free pyExifToolGui graphical frontend for the command line tool ExifTool by Phil Harvey.)   Almost all of the Exif data is the same, but LR has added some additional info to the files after import, including (of course) keywords. However, I would not have expected the differences I found to enter into the duplicate detection scheme. (I didn't see a way to attach the spreadsheet to this posting as it's not an "image".)
I'm running LR 5.7 on a 27" iMac with Yosemite 10.10.2, having used LR since LR2. I have all my original images (.JPEGs and RAWs of various flavors) on my internal drive on the Mac.   To me this is like saving all my memory cards and never re-using them.   Fortunately, these files are backed up several ways.   I import these images (copying RAWs as DNG) into LR with a renaming scheme that includes the import number, original file creation date and original file name.   There should be one LR folder for each original source file folder, with the identical folder name (usually a place and date). I store the LR catalog and imported images on an external drive. Amazingly and unfortunately my external drive failed as did it's twin, same make/size drive that I used as a backup with Carbon Copy Cloner.   I used Data Rescue 4 to recover to a new disk what I thought was almost all of the files on the external drive.
So, I thought all would be well, but, when I tried "Synchronize Folder" using the top-level folder of my catalog, the dialog box appeared saying there were over 1000 "New" photos that had not been imported. This made be suspicious that I had failed to recover everything.   But actually things are much worse than I thought..   I have these counts of images:
80,0061 files in 217 folders for my original source files (some of these may be (temporary?) copies that I actually don't want to import into LR)
51,780 files in 187 folders on my external drive containing the LR photo library
49,254 images in the top-level folder in the LR catalog (why different from the external file count?)
35,332 images found during import of the top-level folder containing original images
22,560 images found as "new" by LR during import
1,074 "new" images reported by Synchronize Folder ... on the top-level folder in the catalog; different from import count
Clearly things are badly out of sync.   I'd like to be sure I have all my images in LR, but none duplicated.   Thus, I want to try to import the entire library and have LR tell me which photos are new. I have over 200 folders in LR. I am now proceeding to try importing each folder, one at a time, to try to reconcile the differences and import the truly missing images. This will be painful. And it may not be enough to fully resolve the above discrepancies.
Does anyone have any ideas or suggestions? I'd really appreciate your help!
Ken

Thanks for being on the case, dj!   As you'll see below, YOU WERE RIGHT!      But I am confused.
    1. Does the same problem exist if you try to import (not synchronize) from that folder? In other words, does import improperly think these are not duplic
YES. Import improperly thinks they are NOT duplicates, but they are in fact the same image (but apparently not the EXACT SAME bytes on disk!)
    2. According to the documentation, a photo is considered a duplicate "if it has the same, original filename; the same Exif capture date and time; and the same file size."
This is my understanding too.
    3. Can you manually confirm that, for an example photo, that by examining the photo in Lightroom and the photo you are trying to synchronize/import, that these three items are identical?
NO, I CAN'T! The ORIGINAL file name (in the source folder) is the SAME as it was when I first imported that folder. That name is used as part of the renaming process using a custom template. However, the file SIZES are different.    Here is the Finder Get Info for both files. Initially, they appeared to be the same SIZE, 253KB, looking at the summary. But, if you look at the exact byte count, however, the file sizes are DIFFERENT: 252,632 for the original file and 2252,883 for the already-imported file:
This difference alone is enough to indicate why LR does not consider the file a duplicate.
Furthermore, there IS one small difference in the EXIF data regarding dates ... the DateTimeOriginal:
                                                                                               CreateDate              DateTimeDigitized                    DateTimeOriginal              FileModifyDate                              ModifyDate
ORIGINAL name: P5110178.JPG                                     2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:01:17 11:29:00        2011:01:17 11:29:00-07:00       2005:04:24 14:41:05
After LR rename: KRJ_0002_010511_P5110178.JPG    2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:05:11 15:27:18        2011:01:17 11:29:02-07:00       2005:04:24 14:41:05
So ... now I see TWO reasons why LR doesn't consider these duplicates.   Though the file NAME is the same (as original), the file sizes ARE slightly different. The EXIF "DateTimeOriginal" is DIFFERENT.   Therefore, LR considers them NOT duplicates.
     4a. With regards to the screen captures of your images and operating system folder, I do not see that the filename is the same; I see the file names are different. Is that because you renamed the photos in Lightroom (either during import or afterwards)?
I renamed the file on import using a custom template ...
        4b. Can you show a screen capture of this image that shows the original file name in the Lightroom metadata panel (it appears when the dropdown is set to EXIF and IPTC)?
SO ....
The METADATA shown by LR does NOT include the ORIGINAL file name (but I think I have seen it displayed for other files?). The File SIZE in the LR metadata panel (246.96 KB) is different from what Finder reports (254 KB). There are three "date" fields in the LR metadata, and five that I've extracted from the EXIF data.   I'm not sure which EXIF date corresponds to the "Data Time" shown in the LR metadata.
I don't understand how these differences arose.   I did not touch the original file outside LR.   LR is the only program that touches the file it has copied to my external drive during import. (though it was RECOVERED from a failed disk by Data Rescue 4),
NOW ...
I understand WHY LR considers the files different (but not how they came to be so). The question now is WHAT DO I DO ABOUT IT?   Is there any tool I can use to adjust the original (or imported) file's SIZE and EXIF data to match the file LR has? Any way to override or change how LR does duplicate detection?
Thanks so very much, dj.   Any ideas on how to get LR to ignore these (minor) differences would be hugely helpful.

Meta-Data are missing for table

Similar Messages

Maybe you are looking for