Meta data on the prints and album

Hi
I want to put the meta data at the bottom of the prints and in the album pages. Is there any menu available in Aperture to do so. Please explain.
Badrakumar

Dear Ian
I want it on the individual prints and the books
Badrakumar

Similar Messages

  • I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

    I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
    It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
    I don't want to start again with rating my (beautiful classical) music!
    Thanks, from Amsterdam, NL

    Did you do the move via Home Sharing, astro?
    If so, perhaps try the instructions from the following post:
    Re: i transfered itunes to my pc playlists did not go

  • Uploading Meter data into the system

    Can some one please describe the process of uploading the meter data into CC&B.
    What is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
    Also i found out that there are batch process MUP1 and MUP2 which need be rum in order to upload the meter data into the system from the meter read staging table.Is this correct.
    With regards to the meter upload staging table, i referred to the MR staging table : CI_MR_STAGE_UP
    there is some data available with the installation as demo data.
    For column MR_UP_STATUS_FLAG, there are values such as E, P, C...I unsersatnd there meaning.
    1) For Pending P status, i submitted the batch processes MUP1 and then MUP2, expecting that teh status might change to Complete, c.......at the same time i ran MRUP-PRG ........well i was going to write nothing happened , but i saw that after some time all teh rows with ataus P and C are not present any more..........
    2)How do i rectify the data with E status.........
    Please helpp me uploading more data to the CI_MR_STAGE_UP Meter read staging table.

    Hi,
    thanks for the reply..
    can u please tell me what is the content of the flat file that i upload.can i upload a meter read XML file directly into the staging tables.....kindly explain the steps..I have not been able to upload any daat into the system using staging control and staging upload page.
    if u can give a flat file sample content for the meter read.
    Also is it advisable to insert data into upload staging table through SQL drectly.
    And can u pls tell me the difference between XAI upload staging table and other upload staging table such as for MR, FA etc.

  • The meta data for the IDoc type "LOIPRO01" is unavailable

    Hello,
    i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
    The meta data for the IDOC type LOIPRO01 is unavailable
    I've checked the parameters on MII side of the IDOC Listener:
    Servername  MII_JCI33 
    server Properties 
    gwhost H33-I0.rz.k-plus-s.net 
    gwserv sapgw02 
    progid MII_JCI33 
    trace 1 
    params   
    snc_myname   
    snc_qop   
    snc_lib   
    unicode 1 
    max_startup_delay   
    Client Properties 
    client 303 
    user RFC-I33 
    alias_user   
    passwd   
    lang en 
    sysnr 02 
    ashost h33-i0.rz.k-plus-s.net 
    mshost H33-I0.rz.k-plus-s.net 
    gwhost H33-I0.rz.k-plus-s.net 
    gwserv sapgw02 
    r3name H33 
    group   
    tpname MII_JCI33 
    tphost H33-I0.rz.k-plus-s.net 
    type 3 
    trace 1 
    codepage 1 
    There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
    Has anyone an idea ?
    Kind Regards,
    Thomas Strecker

    Thomas,
    There is a link for a basic IDoc installation that may help.
    [IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
    One other issue that has occurred to cause problems is registering the program in Visual Administrator.  If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server).  Delete the registration in VA, if you did it.
    If there are other error messages available, please post them.
    Good luck,
    Mike
    I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem.  Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
    Edited by: Michael Appleby on Feb 10, 2009 5:02 PM

  • The meta data for the IDoc type "MATMAS05" is unavailable

    Dear Gurus:
    I need  help in completing small test that I am doing to send MATMAS IDOC to xMII.
    I have done:
    1.     RFC connection SM69 and tested ok
    2.             xMII IDOC Listner config with my SAP client
    3.     Connection appears in –smgw ok (in logon client screen)
    4.     Completed Distribution channel and we20,we21
    All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
    On tRFC I see error “The meta data for the IDoc type "MATMAS05" is unavailable.”
    Note that
    a) I am NOT using transaction on routing tab
    b) xMII version 11.5
    c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
    d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
    Please help.
    Thanks
    Jay

    Jay,
    What version of ERP are you using, perhaps this note will help: 770239
    Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
    -Sam
    null

  • How can I transfer the meta data to the Oracle OLAP Object?

    When I finished in building a simple DataWare house demo in the warehouse Builder, I got meta data. But it seems that those doesn't present in the "<Database>" - "OLAP" - "Dimension" where the Sample "SH" resides.I just want to export those metadata to the SQL script, but failing to import the script to the Database. How can I transfer my demo's meta data to the OLAP Object? It is the last step to finish the whole process and I can't solve the problem.
    I'll appreciate any one who can help me.

    Hello,
    To enter/move the metadata for dimensions and facts to the OLAP catalog, you need to perform the following actions:
    1) Create a business area in the OWB business tree holding the dimensions and facts you want in OLAP
    2) Perform a metadata export, using the bridge (not to file!)
    3) This will launch a wizard that will guide you through this process, follow the instructions carefully
    4) Upon completion you will see metadata added into the OLAP catalog
    We will be releasing a new version for this, which will be running on 9.2.0.2 database that allows you to use all the new 9i Release 2 OLAP features. This will create Analytic Workspaces from Warehouse Builder and should be released late this year (around end of November).
    Hope this helps,
    Jean-Pierre

  • I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

    I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly  to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

    Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

  • A "HP Twain Scan" function in the "Print and Scan Doctor" app - Solution?

    Frustration!! Why can't I get the scanning portion of subject printer to work on my laptop Windows 7 (64-bit)!?? I've tried the Print and Scan Doctor several times, and the same dysfunction says "HP Twain Scan" whatever that means or is? I've pulled out the cords, all of 'em, and it still not helping.  Did I purchase a printer that is not compatible with my laptop? As far as the scanning portion is concerned, or what?  I can print OK, both from website/emails and my own documents.  I do a lot of scanning (photos mostly), and so this will be a sad problem.Hoping someone out there in techland can give me a solution. Thanks!

    Hi , Welcome to the HP Forums! I understand that you cannot scan with your HP Envy 7645 on Windows 7. I am happy to look into this scanning issue for you! Some questions for you: Are you able to make copies with the printer? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series.How is the printer connected? Wireless, Ethernet, or USB? In the meantime, please try the steps within this scanning guide, A 'No Computer Found', 'Connection Required', or 'Scan Unsuccessful' Message Displays for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One Printer Series, and let me know what happens! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • How do I set the print and paper size in iPhoto 5

    Can somebody please help. How do you set up iPhoto 5 so that you define both the the size of the print and the photo paper you use?
    For example, I wish to print a 4.5cm x 3.5 cm photo on 6x4 (or 15cm x 10cm to keep all the units the same) paper.
    I've seen a post saying how to do it in iPhoto 8, but the drop-downs are different.

    I do not remember the locations in iPhoto 5 but there are probably three places to mess with
    1 - set the paper size
    2 - set the print size
    3 - set the paper tray for the printer to use that has the paper size that you set in step 1
    these may be in the print sequence or under the file menu as page set up (or similar). If these are not obvious try the Help menu
    LN

  • How do I sync my old iPhone 5 to a new laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

    how do I sync my iPhone 5 to a new Toshiba laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Why doesn't the artist and album name show up on my iPod?

    I edit each of my song through "Get Info", so I just simply type in the artist and album name. When I eject my iPod, the artist and album name doesn't show. Solution?

    That happened to me too... It's a glitch... what I did is press sync right when i put my ipod in.. sometimes it doesn't work... just do it some other time again...or change someting in the song (getting info) It appears randomly...

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

    Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

    Open Finder and click on Go > Go to Folder. Then type
    /Library/Printers/Canon
    and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

  • I still don't totally understand the difference on my iPhone between PhotoStream (with iCloud icon), Photos (the icon) and Albums and Camera Roll (under Photos icon) and and Camera Roll (under Camera icon).  I want to delete photos from my iPhone 4.

    I  don’t  understand the difference on my iPhone between PhotoStream (with iCloud icon), Photos (the icon) and Albums and Camera Roll (under Photos icon) and and Camera Roll (under Camera icon).  They seem to be more or less the same thing, but deleting photos in one place does not delete them elsewhere.
    When I tried to import from my camera to my iMac computer the computer would not recognized 900 of the 920 photos on the camera so I had to (successfully) use the Image Capture application to import them.
    I want to delete photos from my iPhone 4 in order to free up storage (I only have 8GB.)  But in synching I do not want to delete any images from my iPhoto on my computer.
    Is there a way that I can Delete All under Edit in either Photos or Camera on my iPhone and check about 20 ijmages to remain on the iPhone?  I could find no command to Select All and then uncheck the 20 photos I want to keep.
    I have the 8GB iPhone and the iMac with OS 10.9.2 and iPhoto '09 Version 8.1.2.
    Help!

    I have Version 6.1.3 because the clogged storage will not allow me to upload Version 7.1.  Catch 22.  This is basically a storage issue, I believe.  I cannot delete enough stuff on my iPhone to allow me to either back up or upload the new OS 7.  I am unwilling to pay for more storage in iCloud, so I want to delete stuff I don't need.  But I haven't yet figured out how to successfully do that.  I synch my phone and computer.  I want to delete mail on the Mail app and photos and still keep my photos on my computer on iPhoto, but not on my phone.  I seem unable to do that.  Any advice?

Maybe you are looking for