Meta data Overview for Idoc Adapter

Hi All,
When i am trying to create meta data overivew for Idoc adpater of my source port, i am gettign this error "<b>Error: I::000</b>" and surprising abt this error.Any clues on this.........:) what should i do to do this??
Thanks in Advance
Cheers
Veera

Hi All,
Once i have cross check RFC destination & Port and tried to load the meta data it was succesfully loded with out ant errors.The same port i have mention in Receivr Idoc adapter and tested the sceanrio File2Idoc.It is working fine.
I have solved the problem my own ( And the tricky thing is i have deleted and recreated RFC dest,Port from XI to R3).However what is the cause of this error??
Cheers
Veera

Similar Messages

Error when Loading Metadata for IDOC Adapter

Everybody,
I know this should be pretty straight forward and that there are a few posts about it. But following the Demo 3.0 guide and the posts I can't seem to load the data into the IDOC Adapter. I did every step in the guide and when I try to execute IDX2 for the source port I previously created I get the error "No RFC Destination is maintained for the port".
Following the guide I have my XI host
ID:ABC
Instance:01
Client:700
Executed IDX1 and got port SAPABC_107 with RFC Dest-ABC_107, which I defined previously with transaction sm59 and the test came back ok.
When I try to execute IDX2 I get the error message...
What am I missing ?????
Thanks!
Diego

Everything was setup before (by following the XI 3.0 Demo guide) here are the steps I did:
1. Setup an RFC R/3 Destination on my client 107 (American Airlines) to client 700 (my XI): ABC_700
2. Setup an RFC R/3 Destination on my client 700 to client 107: ABC_107
3. Setup the IDOC processing port "SAPABC" on client 107 with RFC Destination ABC_700.
4. Define partner type LS for logical system ABCCLNT105 (Airline Lufthansa)
5. Define partner type LS for logical system ABCCLNT700 (XI)
6. Specified the ALE distribution model in client 107.
7. Execute IDX1, I input the SAPABC port created in step 3, input the client number 107 and the RFC destination ABC_107 created in step 2 and save. The result is port SAPABC_107.
AND..!! where the error occurs:
8. Execute IDX2 input port SAPABC_107 and idoc type and get the error message "No RFC Destination is maintain for SAPABC_107"
Any ideas !?
Thanks
D
The client 107 represents the Airline American Airlines and has a R/3 RFC Destination to client 700, my XI. The same way my XI has an R/3 RFC Destination to client 107.

SA PI 7.1 EHP1 - Support for IDOC Adapter using AAE

Hi,
Can anyone confirm if the SAP PI 7.1 EHP1 supports the IDOC adapter in the AAE ?
Cheers
Colin.

Hi Colin,
I am workinngt on EHP1 PI7.1,but no support for IDoc Adapter in the AAE.
The new features added for IDoc adapter is IDoc packging and new conversion module added .
we have to wait till next release,but not sure...
Regards,
raj

Is meta data used for SEO if so how dose it work ?

Is meta data used for SEO? I would like to know how to create meta data for SEO use. I found this on a form with the label mete data for SEO. Can anyone help me understand what the parts of this code are used for?
<title>epecho | The visual works of Danel Roldán</title>
<meta name="verify-v1" content="+Yjk73MkziQFeIPyBcJtgXwi2LcwfLnAMazU0KtigIA=" />
<meta http-equiv="content-type" content="text/html; charset=utf-8" />
<meta name="description" content="epecho is a creative studio founded by designer Danel Roldán in 2004. Located in New Jersey, epecho serves clientele locally, nationally and internationally.
epecho focuses on logo design, corporate and brand identity and works closely with providers of multimedia, illustration and production of internet and print marketing campaigns. For more information please contact epecho. For a direct quote, please complete and submit the online application form." />
<meta name="keywords" content="logo, logos, logo design, logo designs, brand, brands, branding, brand design, brand designs, design, designer, graphic, graphic designer, danel, danel roldán, roldán, jersey, new jersey, geneva, lausanne, cross, genève, graphiste, logotype, font, type, typeface" />
<meta name="author" content="Danel Roldán" />
<meta name="copyright" content="(c) 2009 epecho" />

Vinay has given you some good links, but I'll add a little bit more :-)
<meta name="verify-v1" content="+Yjk73MkziQFeIPyBcJtgXwi2LcwfLnAMazU0KtigIA=" />
That is a verification code, supplied via google if you have signed up for the WebMaster Tools:
https://www.google.com/webmasters/tools/
It allows you to check some stats etc., once you have added the verification code to your page.
The only other Meta Tags you really need to use are the <Title> tag and the Description tag.
The rest of SEO is making sure that the web pages are SE friendly. Not many SEs take into account all those meta-tags these days.
Make sure that keywords are scattered through the pages, make sure that the <h1> and <h2> heading tags use words that are important to site as they help with SEO as well.
SEO can't be mastered in a day - there are people that do this full time and even they are constantly learning new ways to ensure good rankings in the SEs. :- ) It's not dificult, but does take persistence !
Google's SEO Starter Guide (PDF)
http://www.google.com/webmasters/docs/search-engine-optimization-starter-guide.pdf
High Rankings Advisor
http://www.highrankings.com/newsletter/
SEOMoz.org - Beginner's Guide to SEO (1-page html)
http://www.seomoz.org/article/beginners-1-page
SEO Chat
http://www.seochat.com/

QoS for IDOC adapter

Hi all ,
what are the QOS available for idoc adapter
Regards,
Tarang

Hi,
Check on this:
<i>The quality of service EOIO (Exactly Once In Order) must be specified in the message header.
The receiver system or the sender system must be based on SAP Web Application Server 6.40 or higher.
If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is processed accordingly.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
Regards
Vijaya

Data elements for IDoc Segments to non-SAP system

Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
Sriram

Hi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu.

Empty payload for idoc adapter

Hello,
I have a file to idoc scenario with an xslt mapping. Normaly after the mapping the idoc looks like:
<wpwuw>-
<idoc>...</idoc>
<idoc>...</idoc>
</wpwuw>
Because of the business requirements in some cases the mapping should not generate an idoc. That means I have to create an empty payload.
The problem is that the idoc adapter creates an error for all kinds of empty messages.
a) empty payload
b) empty trading segment ( <wpwuw></wpwuw> )
c) empty idoc segment ( <wpwuw>-<idoc/>-</wpwuw> )
Any idea what I can do not to get an error from the idoc adapter ?
Regards Bernd

HI
instead of creating empty paylaod. Use conditional(enhanced for mapping & standard for condition on Xpath) receiver determination for this and dont generate IDOC for the specified conditions.
Thanks
Gaurav

IDOC: Problem with data filter for IDOC extension field

Hallo!
I've created an idoc extension for the basic type DEBMAS06 that works fine. Now I want to use a data filter for one field ( company code ) of my segment. Every segment with a company code different from 100 should be filtered and not send to the other client. But what happend is that for all customers that have at least one company code different from 100, all segments including the one with cc 100 were deleted and a error "Segment ... does not exist for message type DEBMAS" appeared on the screen.
Does anyone have any ideas about this problem?

Not sure about changes to be made at the filtering options.
An alternative would be sending the data to XI as it is and perform the mapping to remove the unnecessary segments.
Disadvantage: Unnecessary processing of segment would be done at XI.
Advantage: The integration logic would be completely handled by XI.
Regards,
Prateek

Data type for mail adapter

HI
what type of data will come to mail ??
or
which type of data type we should you for Mail adapter ??
Regards
Kumar

Below link would address your doubts on mail adapters.
Mail Adapter

Port Settings for IDoc Adapter

Hi All,
Our scenario is like this ERP -> XI -> File. ERP sends IDoc to XI. I have a couple of questions.
1. In the control part of an IDoc, there's a sender partner number and sender port. What are they used for? As I understand, the partner and port represent the destination of the IDoc instead of the source. Why is there sender port and partner?
2. We need to maintain port using IDX1. Should I set the name of the port to be the same as the sender port of the IDoc?
3. I didn't configure the scenario and the IDoc sender adapter. If the ERP system sends IDoc to XI, can I find it in t-code IDX5?
Best Regards
Jerome

Hi Jerome,
1. Sender Partner and Port : The control record should have sender port and partner number. This will be used by the receiver system (i.e., XI system). Because, receiver system should know from which system this IDoc is coming using Sender Partner number. This partner number should be same as Logical system name in Sender Business system which is configured in SLD.
The sender port should be SAP<Sys-id of sender system>
and sender partner number should be <sys-id of sender>CLNT<client number of sender>
2. The port created in IDX1 will be used for importing IDoc's metadata in XI system from R/3. IDoc metadata is needed by IDoc adapter to convert incoming IDoc to IDoc-XML format.
It is mandatory to have same name for Port in IDX1 and sender port of the IDoc's control record.
3. I think the IDoc wont be listed in IDX5 if scenario and IDoc adapter are not configured. IDX5 displays inbound and outbound IDocs in the IDoc adapter.
Regards,
Uma

Authorization for RFCUSER for IDOC adapter

Hello,
who can tell me, which authorizations the RFC User must have I want to use for the IDOC adapter.
I have the problem, that I can not download the idoc definition into IDX2. Error: "No RFC authorisation..."
Is there a list of authorization this user MUST have.
best regards
Werner Magerl

Hi,
The thread speaks of the same issue.
User abcd has no RFC authorization for function group SYST
If it's of any help.
regards
Vijaya

Required Enhancement Package for Idoc Adapter in Java

Hi experts,
I just would like to know which Enhancement Package I need for PI 7.1 when I want to have the Idoc adapter to be implemented in Java and not only in ABAP.
Thanks and regards.
Oliver Vöpel.

I talked to someone from the SAP development. They told me it will be realized in enhancement package 2 or 3.
Thanks and best regards.
Oliver Vöpel.

Sender Radio Button disabled for Idoc adapter

If u clearly observe .......
Whats the necessity or significance of not having a sender communication channel(sender side radio button is disabled) and sender agreement in scenarios pertaining to Idocs....

Hi Deepika,
Just think that IDOC adapter as a sender, that means, you are getting source file (IDOC) from R/3 (SAP) system definitely. And XI is also and SAP system. As both are SAP systems, we already have a way of establishing the connection between SAP systems, which is ALE configuration. Using which, you can easily transfer IDOC from R/3 to XI.
Also, you might know that IDOC and HTTP adapters reside on ABAP stack. When the R/3 and XI configuration settings are done, XI can receive the IDOC sent by R/3, directly to Integration Engine instead of Adapter Engine. If the file initially reaches to Adapter Engine, then the details about sender application are necessary, that means the Sender Agreement. But in this case, you don't even need the Sender Agreement.
I hope you understand why the IDOC sender button is disabled and sender agreement is not necessary.
Thank you.
Regards
Bhanu
Intelligroup.

Missing data status for Idocs : HR ORG Upload in SRM

Hi All,
We are using ALE Idocs for uploading HR ORG in SRM system.We are getting some IDocs errors. 51 status is 'Missing data'.
Details description like below:
Missing data
Message no. HRALX00_ORG315
Diagnosis
It has been determined that the employee 00036837 has been received for the first time. However, not all the data that is needed to create a business partner has been received. In this case, the infotype 1001 and the subtype A209 have not been entered for the employee.
Procedure
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system. Add a new filter group to the data filter. Assign the following values for the filter group: infotype: 1001, object type: P, subtype: A209. After you have generated the partner profile again and distributed the distribution model, you can redistribute the relevant IDoc.
Please help me How to resolve this issue.Please let us know if you need any more information.

Hi Ramchandra,
it s the best solution to your query to load the IDOCs manually using the context menu of the datapackage or IDOC --> manual update and then refresh the load as it is not throwing any error
check do you have enough number of process running in your system
check for TRFC logs
Thank you

Data Type for File adapter

hi all,
we have a scenario which is idoc-xi-file
the output data type should be something like this:
[Data.1]
Promo,1000,,,,,,,
PromoD,2000,,yup
Item,1,IGRP,,,,,,FTY,3
Tier,1,,,,,,,ITEM,,
Itemy,1,IGRP,,,,,,FTY,1,A_,100,,ELST
we have to use file content conversion parameters for this as well as this needs to be converted to a CSV file format(third party system).
any help in declaring this kind of data type(structure) and handling file content conversion parameters would be highly appreciated.
for data type if any anybody can help me build the structure or give an example!!!
would be gr8!!!
thanks in advance
ahmed

Hi Parvez,
For file content conversion, you can refer the below link:-
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
I hope this helps.
Regards.
Praveen

Meta data Overview for Idoc Adapter

Similar Messages

Maybe you are looking for